Use TEXT_BASE rather than a hard-coded base address on x86 linker scripts. This will allow any board to define its base link address without having to modify the linker script
Signed-off-by: Graeme Russ graeme.russ@gmail.com --- board/eNET/u-boot.lds | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/eNET/u-boot.lds b/board/eNET/u-boot.lds index 7b0ffaa..d78d75f 100644 --- a/board/eNET/u-boot.lds +++ b/board/eNET/u-boot.lds @@ -27,7 +27,7 @@ ENTRY(_start)
SECTIONS { - . = 0x06000000; /* Location of bootcode in flash */ + . = TEXT_BASE; /* Location of bootcode in flash */ _i386boot_text_start = .; .text : { *(.text); }
@@ -98,12 +98,12 @@ SECTIONS * The fff0 offset of resetvec is important, however. */ . = 0xfffffe00; - .start32 : AT (0x0603fe00) { *(.start32); } + .start32 : AT (TEXT_BASE + 0x3fe00) { *(.start32); }
. = 0xf800; - .start16 : AT (0x0603f800) { *(.start16); } + .start16 : AT (TEXT_BASE + 0x3f800) { *(.start16); }
. = 0xfff0; - .resetvec : AT (0x0603fff0) { *(.resetvec); } + .resetvec : AT (TEXT_BASE + 0x3fff0) { *(.resetvec); } _i386boot_end = (LOADADDR(.resetvec) + SIZEOF(.resetvec) ); }