From: Takahiro Kuwano Takahiro.Kuwano@infineon.com
Some of Spansion/Cypress chips support Read/Write Any Register commands. These commands are mainly used to write volatile registers and access to the registers in second and subsequent die for multi-die package parts.
The Read Any Register instruction (65h) is followed by register address and dummy cycles, then the selected register byte is returned.
The Write Any Register instruction (71h) is followed by register address and register byte to write.
Signed-off-by: Takahiro Kuwano Takahiro.Kuwano@infineon.com --- drivers/mtd/spi/spi-nor-core.c | 25 +++++++++++++++++++++++++ include/linux/mtd/spi-nor.h | 4 ++++ 2 files changed, 29 insertions(+)
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 34c15f1561..2803536ed5 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -211,6 +211,31 @@ static int spi_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) return spi_nor_read_write_reg(nor, &op, buf); }
+#ifdef CONFIG_SPI_FLASH_SPANSION +static int spansion_read_any_reg(struct spi_nor *nor, u32 addr, u8 dummy, + u8 *val) +{ + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDAR, 1), + SPI_MEM_OP_ADDR(nor->addr_width, addr, 1), + SPI_MEM_OP_DUMMY(dummy / 8, 1), + SPI_MEM_OP_DATA_IN(1, NULL, 1)); + + return spi_nor_read_write_reg(nor, &op, val); +} + +static int spansion_write_any_reg(struct spi_nor *nor, u32 addr, u8 val) +{ + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRAR, 1), + SPI_MEM_OP_ADDR(nor->addr_width, addr, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, NULL, 1)); + + return spi_nor_read_write_reg(nor, &op, &val); +} +#endif + static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, u_char *buf) { diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 89e7a4fdcd..e31073eb24 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -121,6 +121,10 @@ #define SPINOR_OP_BRWR 0x17 /* Bank register write */ #define SPINOR_OP_BRRD 0x16 /* Bank register read */ #define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */ +#define SPINOR_OP_RDAR 0x65 /* Read any register */ +#define SPINOR_OP_WRAR 0x71 /* Write any register */ +#define SPINOR_REG_ADDR_STR1V 0x00800000 +#define SPINOR_REG_ADDR_CFR1V 0x00800002
/* Used for Micron flashes only. */ #define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */