On Tue, Aug 31, 2021 at 05:40:19PM +0200, Michael Walle wrote:
This series sync the device tree of the LS1028A SoC with the linux one. To ease future debugging and reviewing, we first clean up the existing one, removing bogus nodes, moving all CCSR related nodes in /soc and update the drivers to accept the offical compatible strings.
This was tested on a sl28 board, but the ls1028a.dtsi sync also affects the LS1028A-RDB and -QDS. It would be nice if someone could actually test it on such a board.
I didn't sync the device trees for the NXP boards because u-boot related things aren't split into its own -u-boot.dtsi file. So I'll leave that task to NXP :)
The following patch is a prerequisite for this series: https://patchwork.ozlabs.org/project/uboot/patch/20210825210510.24766-1-trin...
Thanks for the work, this is appreciated.
So this needs a v2, but in general, who do you expect to pick up your patches?
After reviewing the patches I noticed further cleanup to be done, we need to replace phy-mode = "sgmii-2500"; with phy-mode = "2500base-x";
and phy-mode = "xfi"; with phy-mode = "10gbase-r";
and then delete the fsl_enetc.c driver's support for PHY_INTERFACE_MODE_XFI and PHY_INTERFACE_MODE_XGMII, that's completely bogus.