Introduce initial support for the Enclustra SoMs:
- Mercury AA1
Cover general board files for SD/MMC and QSPI boot modes. Integrate the boards to kconfig. All build variants will depend on Quartus handoff files, thus they depend on the particular Quartus design. The approach is covered in the according documentation part.
Additionally add configuration for SD/MMC boot and QSPI bootmodes. Register additional targets in kconfig.
Signed-off-by: Andreas Buerkler andreas.buerkler@enclustra.com Signed-off-by: Lothar Rubusch l.rubusch@gmail.com --- arch/arm/mach-socfpga/Kconfig | 9 + board/enclustra/common/Kconfig | 1 + board/enclustra/common/Makefile | 4 + board/enclustra/mercury_aa1/Kconfig | 15 ++ board/enclustra/mercury_aa1/MAINTAINERS | 11 ++ board/enclustra/mercury_aa1/Makefile | 8 + .../mercury_aa1/aa1_set_storage_cmd.c | 177 ++++++++++++++++++ board/enclustra/mercury_aa1/bitstream.its | 32 ++++ .../socfpga_enclustra_mercury_aa1_defconfig | 78 ++++++++ include/configs/socfpga_mercury_aa1.h | 33 ++++ 10 files changed, 368 insertions(+) create mode 100644 board/enclustra/common/Kconfig create mode 100644 board/enclustra/common/Makefile create mode 100644 board/enclustra/mercury_aa1/Kconfig create mode 100644 board/enclustra/mercury_aa1/MAINTAINERS create mode 100644 board/enclustra/mercury_aa1/Makefile create mode 100644 board/enclustra/mercury_aa1/aa1_set_storage_cmd.c create mode 100644 board/enclustra/mercury_aa1/bitstream.its create mode 100644 configs/socfpga_enclustra_mercury_aa1_defconfig create mode 100644 include/configs/socfpga_mercury_aa1.h
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 6b6a162f56..d42e7817be 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -221,6 +221,10 @@ config TARGET_SOCFPGA_TERASIC_SOCKIT bool "Terasic SoCkit (Cyclone V)" select TARGET_SOCFPGA_CYCLONE5
+config TARGET_SOCFPGA_ENCLUSTRA_MERCURY_AA1 + bool "Enclustra Mercury+ AA1" + select TARGET_SOCFPGA_ARRIA10 + endchoice
config SYS_BOARD @@ -244,6 +248,7 @@ config SYS_BOARD default "sr1500" if TARGET_SOCFPGA_SR1500 default "stratix10-socdk" if TARGET_SOCFPGA_STRATIX10_SOCDK default "vining_fpga" if TARGET_SOCFPGA_SOFTING_VINING_FPGA + default "mercury_aa1" if TARGET_SOCFPGA_ENCLUSTRA_MERCURY_AA1
config SYS_VENDOR default "intel" if TARGET_SOCFPGA_AGILEX5_SOCDK @@ -264,6 +269,7 @@ config SYS_VENDOR default "terasic" if TARGET_SOCFPGA_TERASIC_DE10_NANO default "terasic" if TARGET_SOCFPGA_TERASIC_DE10_STANDARD default "terasic" if TARGET_SOCFPGA_TERASIC_SOCKIT + default "enclustra" if TARGET_SOCFPGA_ENCLUSTRA_MERCURY_AA1
config SYS_SOC default "socfpga" @@ -289,5 +295,8 @@ config SYS_CONFIG_NAME default "socfpga_sr1500" if TARGET_SOCFPGA_SR1500 default "socfpga_stratix10_socdk" if TARGET_SOCFPGA_STRATIX10_SOCDK default "socfpga_vining_fpga" if TARGET_SOCFPGA_SOFTING_VINING_FPGA + default "socfpga_mercury_aa1" if TARGET_SOCFPGA_ENCLUSTRA_MERCURY_AA1 + +source "board/enclustra/common/Kconfig"
endif diff --git a/board/enclustra/common/Kconfig b/board/enclustra/common/Kconfig new file mode 100644 index 0000000000..51169bada3 --- /dev/null +++ b/board/enclustra/common/Kconfig @@ -0,0 +1 @@ +source "board/enclustra/mercury_aa1/Kconfig" diff --git a/board/enclustra/common/Makefile b/board/enclustra/common/Makefile new file mode 100644 index 0000000000..16c8531d74 --- /dev/null +++ b/board/enclustra/common/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2024 Enclustra GmbH + +# Common for several Enclustra modules diff --git a/board/enclustra/mercury_aa1/Kconfig b/board/enclustra/mercury_aa1/Kconfig new file mode 100644 index 0000000000..40c7cb2687 --- /dev/null +++ b/board/enclustra/mercury_aa1/Kconfig @@ -0,0 +1,15 @@ +if TARGET_SOCFPGA_ENCLUSTRA_MERCURY_AA1 + +config SYS_CPU + default "armv7" + +config SYS_BOARD + default "mercury_aa1" + +config SYS_VENDOR + default "enclustra" + +config SYS_CONFIG_NAME + default "socfpga_mercury_aa1" + +endif diff --git a/board/enclustra/mercury_aa1/MAINTAINERS b/board/enclustra/mercury_aa1/MAINTAINERS new file mode 100644 index 0000000000..862cb1ae31 --- /dev/null +++ b/board/enclustra/mercury_aa1/MAINTAINERS @@ -0,0 +1,11 @@ +Enclustra Mercury+ AA1 +M: Lothar Rubusch l.rubusch@gmail.com +S: Maintained +F: board/enclustra/mercury_aa1/ +F: board/enclustra/common/ +F: include/configs/socfpga_mercury_aa1.h +F: configs/socfpga_enclustra_mercury_aa1_defconfig +F: arch/arm/dts/socfpga_enclustra_mercury_aa1.dtsi +F: arch/arm/dts/socfpga_enclustra_mercury_aa1_emmc_boot.dtsi +F: arch/arm/dts/socfpga_enclustra_mercury_aa1_qspi_boot.dtsi +F: doc/board/enclustra/mercury-aa1.rst diff --git a/board/enclustra/mercury_aa1/Makefile b/board/enclustra/mercury_aa1/Makefile new file mode 100644 index 0000000000..53c84d8156 --- /dev/null +++ b/board/enclustra/mercury_aa1/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2024 Enclustra GmbH + +ifeq ($(CONFIG_SPL_BUILD),) + +obj-y += aa1_set_storage_cmd.o + +endif diff --git a/board/enclustra/mercury_aa1/aa1_set_storage_cmd.c b/board/enclustra/mercury_aa1/aa1_set_storage_cmd.c new file mode 100644 index 0000000000..650457feba --- /dev/null +++ b/board/enclustra/mercury_aa1/aa1_set_storage_cmd.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Enclustra GmbH + * info@enclustra.com + */ + +#include <command.h> +#include <env.h> +#include <init.h> +#include <dm/uclass.h> +#include <asm-generic/gpio.h> +#include <asm/io.h> + +/* Pin muxing */ +#define ALTERA_NONE 0 +#define ALTERA_MMC 1 +#define ALTERA_QSPI 2 +#define ALTERA_EMMC 3 +#define MMC_CLK_DIV 0x9 +#define QSPI_CLK_DIV 0x384 +#define ALTERA_PINMUX_OFFS 0xffd07200 +#define ALTERA_CLKMGR_MAINPLL_CNTR6CLK_BASE 0xFFD04078 + +static int altera_current_storage = ALTERA_NONE; + +static void set_mux_mmc(void) +{ + u32 pinmux_arr[] = {0x0c, 0x8, // IO4 connected to SDMMC + 0x10, 0x8, // IO5 + 0x14, 0x8, // IO6 + 0x18, 0x8, // IO7 + 0x1c, 0x8, // IO8 + 0x20, 0x8, // IO9 + 0x24, 0xf, // IO10 connected to GPIO + 0x28, 0xf, // IO11 + 0x2c, 0xf, // IO12 + 0x30, 0xf, // IO13 + 0x34, 0xf, // IO14 + 0x38, 0xf}; // IO15 + u32 len, i, offset, value; + + len = sizeof(pinmux_arr) / sizeof(u32); + for (i = 0; i < len; i += 2) { + offset = pinmux_arr[i]; + value = pinmux_arr[i + 1]; + writel(value, ALTERA_PINMUX_OFFS + offset); + } +} + +static void set_mux_emmc(void) +{ + u32 pinmux_arr[] = {0x0c, 0x8, // IO4 + 0x10, 0x8, // IO5 + 0x14, 0x8, // IO6 + 0x18, 0x8, // IO7 + 0x1c, 0x8, // IO8 + 0x20, 0x8, // IO9 + 0x24, 0xf, // IO10 + 0x28, 0xf, // IO11 + 0x2c, 0x8, // IO12 + 0x30, 0x8, // IO13 + 0x34, 0x8, // IO14 + 0x38, 0x8}; // IO15 + u32 len, i, offset, value; + + len = sizeof(pinmux_arr) / sizeof(u32); + for (i = 0; i < len; i += 2) { + offset = pinmux_arr[i]; + value = pinmux_arr[i + 1]; + writel(value, ALTERA_PINMUX_OFFS + offset); + } +} + +static void set_mux_qspi(void) +{ + u32 pinmux_arr[] = {0x0c, 0x4, // IO4 connected to QSPI + 0x10, 0x4, // IO5 + 0x14, 0x4, // IO6 + 0x18, 0x4, // IO7 + 0x1c, 0x4, // IO8 + 0x20, 0x4, // IO9 + 0x24, 0xf, // IO10 + 0x28, 0xf, // IO11 + 0x2c, 0xf, // IO12 + 0x30, 0xf, // IO13 + 0x34, 0xf, // IO14 + 0x38, 0xf}; // IO15 + u32 len, i, offset, value; + + len = sizeof(pinmux_arr) / sizeof(u32); + for (i = 0; i < len; i += 2) { + offset = pinmux_arr[i]; + value = pinmux_arr[i + 1]; + writel(value, ALTERA_PINMUX_OFFS + offset); + } +} + +static void altera_set_storage(int store) +{ + unsigned int gpio_flash_sel; + unsigned int gpio_flash_oe; + + if (store == altera_current_storage) + return; + + if (gpio_lookup_name("portb5", NULL, NULL, &gpio_flash_oe)) { + printf("ERROR: GPIO not found\n"); + return; + } + + if (gpio_request(gpio_flash_oe, "flash_oe")) { + printf("ERROR: GPIO request failed\n"); + return; + } + + if (gpio_lookup_name("portc6", NULL, NULL, &gpio_flash_sel)) { + printf("ERROR: GPIO not found\n"); + return; + } + + if (gpio_request(gpio_flash_sel, "flash_sel")) { + printf("ERROR: GPIO request failed\n"); + return; + } + + switch (store) { + case ALTERA_MMC: + set_mux_mmc(); + gpio_direction_output(gpio_flash_sel, 0); + gpio_direction_output(gpio_flash_oe, 0); + altera_current_storage = ALTERA_MMC; + writel(MMC_CLK_DIV, ALTERA_CLKMGR_MAINPLL_CNTR6CLK_BASE); + break; + case ALTERA_EMMC: + set_mux_emmc(); + gpio_direction_output(gpio_flash_sel, 1); + gpio_direction_output(gpio_flash_oe, 1); + altera_current_storage = ALTERA_EMMC; + writel(MMC_CLK_DIV, ALTERA_CLKMGR_MAINPLL_CNTR6CLK_BASE); + break; + case ALTERA_QSPI: + set_mux_qspi(); + gpio_direction_output(gpio_flash_sel, 1); + gpio_direction_output(gpio_flash_oe, 0); + altera_current_storage = ALTERA_QSPI; + writel(QSPI_CLK_DIV, ALTERA_CLKMGR_MAINPLL_CNTR6CLK_BASE); + break; + default: + altera_current_storage = ALTERA_NONE; + break; + } + + gpio_free(gpio_flash_sel); + gpio_free(gpio_flash_oe); +} + +static int altera_set_storage_cmd(struct cmd_tbl *cmdtp, int flag, + int argc, char * const argv[]) +{ + if (argc != 2) + return CMD_RET_USAGE; + + if (!strcmp(argv[1], "MMC")) + altera_set_storage(ALTERA_MMC); + else if (!strcmp(argv[1], "QSPI")) + altera_set_storage(ALTERA_QSPI); + else if (!strcmp(argv[1], "EMMC")) + altera_set_storage(ALTERA_EMMC); + else + return CMD_RET_USAGE; + + return CMD_RET_SUCCESS; +} + +U_BOOT_CMD(altera_set_storage, 2, 0, altera_set_storage_cmd, + "Set non volatile memory access", + "<MMC|QSPI|EMMC> - Set access for the selected memory device"); diff --git a/board/enclustra/mercury_aa1/bitstream.its b/board/enclustra/mercury_aa1/bitstream.its new file mode 100644 index 0000000000..d16e4598de --- /dev/null +++ b/board/enclustra/mercury_aa1/bitstream.its @@ -0,0 +1,32 @@ +/dts-v1/; + +/ { + description = "FIT image with FPGA bistream"; + #address-cells = <1>; + + images { + fpga-periph-1 { + description = "FPGA peripheral bitstream"; + data = /incbin/("bitstream.periph.rbf"); + type = "fpga"; + arch = "arm"; + compression = "none"; + }; + + fpga-core-1 { + description = "FPGA core bitstream"; + data = /incbin/("bitstream.core.rbf"); + type = "fpga"; + arch = "arm"; + compression = "none"; + }; + }; + + configurations { + default = "config-1"; + config-1 { + description = "Boot with FPGA early IO release config"; + fpga = "fpga-periph-1", "fpga-core-1"; + }; + }; +}; diff --git a/configs/socfpga_enclustra_mercury_aa1_defconfig b/configs/socfpga_enclustra_mercury_aa1_defconfig new file mode 100644 index 0000000000..b475bd916d --- /dev/null +++ b/configs/socfpga_enclustra_mercury_aa1_defconfig @@ -0,0 +1,78 @@ +CONFIG_ARM=y +CONFIG_SYS_L2_PL310=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_SYS_MALLOC_LEN=0x4000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xffe2b000 +CONFIG_SF_DEFAULT_SPEED=10000000 +CONFIG_ENV_SIZE=0x80000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="enclustra-aa1" +CONFIG_SPL_TEXT_BASE=0xFFE00000 +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL_STACK=0xffe2b000 +CONFIG_TARGET_SOCFPGA_ENCLUSTRA_MERCURY_AA1=y +CONFIG_IDENT_STRING="socfpga_arria10" +CONFIG_SPL_FS_FAT=y +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" +CONFIG_DEFAULT_FDT_FILE="system.dtb" +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x40000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xffe2b000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x15000 +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" +CONFIG_SPL_FPGA=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +CONFIG_CMD_ASKENV=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_NOWHERE=y +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_VERSION_VARIABLE=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DWAPB_GPIO=y +CONFIG_SYS_I2C_DW=y +CONFIG_MISC=y +CONFIG_FS_LOADER=y +CONFIG_SPL_FS_LOADER=y +CONFIG_MMC_DW=y +CONFIG_SPI_FLASH_SPANSION=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MII=y +CONFIG_SYS_NS16550_MEM32=y +CONFIG_SPI=y +CONFIG_TIMER=y +CONFIG_SPL_TIMER=y +CONFIG_DESIGNWARE_APB_TIMER=y +CONFIG_USB=y +CONFIG_USB_DWC2=y diff --git a/include/configs/socfpga_mercury_aa1.h b/include/configs/socfpga_mercury_aa1.h new file mode 100644 index 0000000000..a5b63336e8 --- /dev/null +++ b/include/configs/socfpga_mercury_aa1.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2024 Enclustra GmbH + * info@enclustra.com + */ + +#ifndef __CONFIG_SOCFGPA_MERCURY_AA1_H__ +#define __CONFIG_SOCFGPA_MERCURY_AA1_H__ + +#include <asm/arch/base_addr_a10.h> + +/* + * U-Boot general configurations + */ + +/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x80000000 + +/* + * Serial / UART configurations + */ +#define CFG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} + +/* + * L4 OSC1 Timer 0 + */ +/* reload value when timer count to zero */ +#define TIMER_LOAD_VAL 0xFFFFFFFF + +/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_SOCFGPA_MERCURY_AA1_H__ */