On Tue, Jul 31, 2012 at 1:25 PM, Fabio Estevam festevam@gmail.com wrote:
Hi,
Just tried 2012.07 on a mx53loco and this is what I got:
U-Boot 2012.07 (Jul 31 2012 - 15:21:51)
Board: MX53 LOCO I2C: ready DRAM: 1 GiB WARNING: Caches not enabled CPU: Freescale i.MX53 family rev2.0 at 1000 MHz Reset cause: POR MMC: FSL_SDHC: 0, FSL_SDHC: 1
(Hangs here)
Have anyone else seen this? I will start debugging it, and any suggestions are welcome.
It's actually not hanging up, if you have a boot script, it seems to runs that just fine, but it will not print it to the serial terminal..
This would seem to redirect the prompt the lcd? http://git.denx.de/?p=u-boot.git;a=commit;h=f714b0a911e24cc733553f02b30d5082...
before that commit i was using "4398d55" with no issues..
mx53loco-r
U-Boot 2012.07-00007-g7395c76 (Jul 31 2012 - 11:29:17)
Board: MX53 LOCO
I2C: ready
DRAM: 1 GiB
WARNING: Caches not enabled
CPU: Freescale i.MX53 family rev2.1 at 1000 MHz
Reset cause: WDOG
MMC: FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment
Uncompressing Linux... done, booting the kernel....
Regards,