Anyone,

I was wondering if somebody could help me out to understand something.

Using the MPC8360E, I have configured up a custom header board and have used the appropriate

#define CONFIG_QE. However when I boot the board up the ‘config_qe_ioports()’ doesn’t seem to get called.

Consequently the Ethernet doesn’t work after U-boot completes.

I placed some printf()’s in the function to see if it was getting called, and no printouts.

So my question is, why isn’t the ‘config_qe_ioports()’ getting called inside the mpc83xx/cpu_init_f.

Is perhaps cpu_init_f() not getting called? Stumped here…

U-boot seems to work fine otherwise, it boots completely into RAM and relocates, etc… I can use the md command and query the ioports and see the settings are not taking effect.

-Russ