Are we assuming a serial port being 11520n8 on ttyS0 (I.E. the same port we normally use for early serial)?
- John
On 06/01/2015 02:27 PM, Simon Glass wrote:
Hi John,
On Jun 1, 2015 3:21 PM, "John Hawley" <john.hawley@intel.com mailto:john.hawley@intel.com> wrote:
Shouldn't be an appreciable differences in the boards, how are you flashing it? Can you punt me a copy of the image so I can try it here and double check?
- John
Please see below for the drive link.
- Simon
On 06/01/2015 01:10 PM, Simon Glass wrote:
+John
Hi Saket,
On 1 June 2015 at 13:45, Saket Sinha <saket.sinha89@gmail.com
mailto:saket.sinha89@gmail.com> wrote:
Hi Simon,
>>>> 5. Now when I am powering Minnowmax and collecting the output
on serial
>>>> Nothing appears. >>>>
It seems to boot OK for me. See details and download link below: Download u-boot.rom from:
https://drive.google.com/file/d/0B7WYZbZ9zd-3eDFaNHpFN2JrcUE/view?usp=sharin...
With this image also, I do not get any output on my serial port(though two blue leds D1 & D2 are lighted up) which I run by "screen /dev/ttyUSB0 115200" using USB to Serial TTL Level sent to me by John.
When I flash MinnowBoard.MAX.X64.079.R01.bin instead of the u-boot.rom, I get all the UEFI outputs on the same setup.
>> >> Can you confirm that you have setup the flashrom tool correctly?
As of now I am trying to burn u-boot.rom with SPI programmer/software on Windows to check the sanity of my flashrom setup.
I have tried flashing both the u-boot.rom and MinnowBoard.MAX.X64.079.R01.bin with the Dediprog Engineering software on Windows with exactly same results for both the cases as with flashrom so atleast flashrom setup is correct.
Yes. I'm not sure what to do here sorry. That image works for me. Is it possible that you have a different board variant to me? Is it the dual core one?
Regards, Simon