On Wed, May 08, 2013 at 09:09:56PM +0200, Peter Korsgaard wrote:
Jump into full u-boot mode if a 'c' character is received on the uart.
We need to adjust the spl bss/malloc area to not overlap with the loadaddr of the kernel (sdram + 32k), so move it past u-boot instead.
For raw mmc, we store the kernel parameter area in the free space after the MBR (if used). For nand, we use the last sector of the partition reserved for u-boot.
This also enables the spl command in the full u-boot so the kernel parameter area snapshot can be created.
Signed-off-by: Peter Korsgaard peter.korsgaard@barco.com
You forgot to drop the RFC part :)
+/* nand */ +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */
This is fine but please update MTDPARTS_DEFAULT with this change as well (call it u-boot-spl-os). Thanks!