On Mon, 11 Jan 2021 21:11:41 +0100 Jernej Skrabec jernej.skrabec@siol.net wrote:
This port is used for debug terminal on all known H616 boards.
Reviewed-by: Samuel Holland samuel@sholland.org Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net
Compared the bits against the manual.
Reviewed-by: Andre Przywara andre.przywara@arm.com
Cheers, Andre
arch/arm/include/asm/arch-sunxi/gpio.h | 1 + arch/arm/mach-sunxi/board.c | 4 ++++ 2 files changed, 5 insertions(+)
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index f817d328f432..cdb7dbd5b8e5 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -206,6 +206,7 @@ enum sunxi_gpio_number { #define SUN6I_GPH_UART0 2 #define SUN9I_GPH_UART0 2 #define SUN50I_H6_GPH_UART0 2 +#define SUN50I_H616_GPH_UART0 2
#define SUNXI_GPI_SDC3 2 #define SUN7I_GPI_TWI3 3 diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 8ed9a87c1195..a883edd24107 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -116,6 +116,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H6_GPH_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H6_GPH_UART0); sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I_H616)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H616_GPH_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H616_GPH_UART0);
- sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T) sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);