Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
README | 4 +- arch/arm/Makefile | 6 +-- arch/arm/config.mk | 6 +-- arch/arm/cpu/arm11/Makefile | 2 +- arch/arm/cpu/arm1176/start.S | 2 +- arch/arm/cpu/arm926ejs/Makefile | 2 +- arch/arm/cpu/arm926ejs/mxs/Makefile | 4 +- arch/arm/cpu/arm926ejs/sunxi/config.mk | 2 +- arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/cpu.c | 2 +- arch/arm/cpu/armv7/lowlevel_init.S | 4 +- arch/arm/cpu/armv7/s5p-common/Makefile | 2 +- arch/arm/cpu/armv7/start.S | 2 +- arch/arm/cpu/armv7/sunxi/Makefile | 4 +- arch/arm/cpu/armv8/Makefile | 6 +-- arch/arm/cpu/armv8/cache_v8.c | 2 +- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 2 +- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 14 +++--- .../armv8/fsl-layerscape/fsl_lsch2_speed.c | 2 +- .../armv8/fsl-layerscape/fsl_lsch3_serdes.c | 6 +-- arch/arm/cpu/armv8/fsl-layerscape/icid.c | 6 +-- arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 6 +-- .../arm/cpu/armv8/fsl-layerscape/ls1043_ids.c | 2 +- .../arm/cpu/armv8/fsl-layerscape/ls1046_ids.c | 2 +- arch/arm/cpu/armv8/fsl-layerscape/spl.c | 4 +- arch/arm/cpu/armv8/start.S | 8 ++-- arch/arm/dts/imx8qm-u-boot.dtsi | 2 +- arch/arm/dts/imx8qxp-u-boot.dtsi | 2 +- .../asm/arch-fsl-layerscape/fsl_icid.h | 6 +-- arch/arm/include/asm/arch-imx8/boot0.h | 2 +- arch/arm/include/asm/arch-lpc32xx/sys_proto.h | 2 +- arch/arm/include/asm/arch-mx6/litesom.h | 2 +- arch/arm/include/asm/arch-mx6/mx6-ddr.h | 4 +- arch/arm/include/asm/arch-mxs/sys_proto.h | 2 +- arch/arm/include/asm/arch-rk3066/boot0.h | 4 +- arch/arm/include/asm/arch-rockchip/boot0.h | 6 +-- .../include/asm/arch-rockchip/cru_rv1126.h | 10 ++--- arch/arm/include/asm/arch-sunxi/boot0.h | 4 +- arch/arm/include/asm/arch-sunxi/sys_proto.h | 2 +- arch/arm/include/asm/fsl_secure_boot.h | 4 +- arch/arm/include/asm/ti-common/sys_proto.h | 2 +- arch/arm/lib/Makefile | 2 +- arch/arm/lib/crt0.S | 14 +++--- arch/arm/lib/crt0_64.S | 10 ++--- arch/arm/lib/eabi_compat.c | 2 +- arch/arm/lib/stack.c | 2 +- arch/arm/lib/vectors.S | 6 +-- arch/arm/lib/zimage.c | 4 +- arch/arm/mach-aspeed/ast2600/Makefile | 2 +- arch/arm/mach-aspeed/ast2600/lowlevel_init.S | 2 +- arch/arm/mach-at91/Makefile | 2 +- arch/arm/mach-at91/config.mk | 2 +- arch/arm/mach-davinci/Makefile | 2 +- arch/arm/mach-davinci/config.mk | 2 +- arch/arm/mach-davinci/misc.c | 2 +- arch/arm/mach-exynos/Makefile | 2 +- arch/arm/mach-exynos/lowlevel_init.c | 4 +- arch/arm/mach-exynos/pinmux.c | 2 +- arch/arm/mach-imx/Makefile | 18 ++++---- arch/arm/mach-imx/cpu.c | 6 +-- arch/arm/mach-imx/hab.c | 8 ++-- arch/arm/mach-imx/imx8/cpu.c | 4 +- arch/arm/mach-imx/imx8m/clock_imx8mm.c | 2 +- arch/arm/mach-imx/imx8m/clock_imx8mq.c | 4 +- arch/arm/mach-imx/imx8m/soc.c | 16 +++---- arch/arm/mach-imx/imx8ulp/Makefile | 2 +- arch/arm/mach-imx/imx8ulp/clock.c | 2 +- arch/arm/mach-imx/imx8ulp/lowlevel_init.S | 2 +- arch/arm/mach-imx/imx8ulp/soc.c | 12 ++--- arch/arm/mach-imx/imx9/Makefile | 2 +- arch/arm/mach-imx/imx9/clock.c | 4 +- arch/arm/mach-imx/imx9/lowlevel_init.S | 2 +- arch/arm/mach-imx/imx9/soc.c | 12 ++--- arch/arm/mach-imx/mx5/clock.c | 2 +- arch/arm/mach-imx/mx6/Makefile | 2 +- arch/arm/mach-imx/mx6/clock.c | 2 +- arch/arm/mach-imx/mx6/litesom.c | 2 +- arch/arm/mach-imx/mx6/opos6ul.c | 4 +- arch/arm/mach-imx/mx6/soc.c | 6 +-- arch/arm/mach-imx/mx7/clock.c | 2 +- arch/arm/mach-imx/mx7/soc.c | 4 +- arch/arm/mach-imx/mx7ulp/clock.c | 2 +- arch/arm/mach-imx/mx7ulp/soc.c | 2 +- arch/arm/mach-imx/syscounter.c | 2 +- arch/arm/mach-k3/am62ax/Makefile | 2 +- arch/arm/mach-k3/am62px/Makefile | 2 +- arch/arm/mach-k3/am62x/Makefile | 2 +- arch/arm/mach-k3/am64x/Makefile | 2 +- arch/arm/mach-k3/am65x/Makefile | 2 +- arch/arm/mach-k3/arm64/cache.S | 2 +- arch/arm/mach-k3/j721e/Makefile | 2 +- arch/arm/mach-k3/j721s2/Makefile | 2 +- arch/arm/mach-k3/j721s2/j721s2_init.c | 2 +- arch/arm/mach-k3/j722s/Makefile | 2 +- arch/arm/mach-k3/j784s4/Makefile | 2 +- arch/arm/mach-k3/r5/Makefile | 2 +- arch/arm/mach-k3/security.c | 2 +- arch/arm/mach-keystone/Makefile | 2 +- arch/arm/mach-keystone/config.mk | 4 +- arch/arm/mach-keystone/mon.c | 2 +- arch/arm/mach-lpc32xx/Makefile | 2 +- arch/arm/mach-mediatek/Makefile | 2 +- arch/arm/mach-mediatek/mt7629/lowlevel_init.S | 2 +- arch/arm/mach-mvebu/Makefile | 8 ++-- arch/arm/mach-mvebu/cpu.c | 4 +- arch/arm/mach-mvebu/include/mach/cpu.h | 8 ++-- arch/arm/mach-mvebu/include/mach/soc.h | 2 +- arch/arm/mach-mvebu/serdes/a38x/Makefile | 8 ++-- arch/arm/mach-mvebu/serdes/axp/Makefile | 4 +- arch/arm/mach-nexell/include/mach/display.h | 2 +- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/am33xx/board.c | 18 ++++---- arch/arm/mach-omap2/boot-common.c | 6 +-- arch/arm/mach-omap2/clocks-common.c | 2 +- arch/arm/mach-omap2/config.mk | 2 +- arch/arm/mach-omap2/config_secure.mk | 2 +- arch/arm/mach-omap2/hwinit-common.c | 14 +++--- arch/arm/mach-omap2/omap3/Makefile | 2 +- arch/arm/mach-omap2/omap3/board.c | 6 +-- arch/arm/mach-omap2/omap3/sdrc.c | 4 +- arch/arm/mach-omap2/omap5/hwinit.c | 2 +- arch/arm/mach-omap2/sec-common.c | 2 +- arch/arm/mach-orion5x/cpu.c | 2 +- arch/arm/mach-orion5x/lowlevel_init.S | 4 +- arch/arm/mach-renesas/include/mach/boot0.h | 2 +- arch/arm/mach-renesas/lowlevel_init_ca15.S | 2 +- arch/arm/mach-rockchip/Makefile | 4 +- arch/arm/mach-rockchip/px30/px30.c | 2 +- arch/arm/mach-rockchip/rk3036/Makefile | 2 +- arch/arm/mach-rockchip/rk3066/rk3066.c | 2 +- arch/arm/mach-rockchip/rk3188/rk3188.c | 4 +- arch/arm/mach-rockchip/rk322x/rk322x.c | 2 +- arch/arm/mach-rockchip/rk3288/rk3288.c | 4 +- arch/arm/mach-rockchip/rk3308/rk3308.c | 2 +- arch/arm/mach-rockchip/rk3328/rk3328.c | 2 +- arch/arm/mach-rockchip/rk3368/rk3368.c | 2 +- arch/arm/mach-rockchip/rk3399/rk3399.c | 8 ++-- arch/arm/mach-rockchip/rk3568/rk3568.c | 2 +- arch/arm/mach-rockchip/rk3588/rk3588.c | 4 +- arch/arm/mach-rockchip/rv1108/Makefile | 2 +- arch/arm/mach-rockchip/rv1126/rv1126.c | 2 +- arch/arm/mach-sc5xx/Makefile | 2 +- arch/arm/mach-sc5xx/config.mk | 2 +- arch/arm/mach-socfpga/Makefile | 2 +- arch/arm/mach-socfpga/board.c | 6 +-- arch/arm/mach-socfpga/clock_manager.c | 2 +- arch/arm/mach-socfpga/clock_manager_arria10.c | 2 +- arch/arm/mach-socfpga/include/mach/boot0.h | 2 +- .../include/mach/clock_manager_arria10.h | 2 +- arch/arm/mach-socfpga/lowlevel_init_soc64.S | 2 +- arch/arm/mach-socfpga/mailbox_s10.c | 2 +- arch/arm/mach-socfpga/misc.c | 2 +- arch/arm/mach-socfpga/misc_arria10.c | 2 +- arch/arm/mach-socfpga/misc_gen5.c | 2 +- arch/arm/mach-socfpga/reset_manager_s10.c | 2 +- arch/arm/mach-socfpga/secure_vab.c | 2 +- arch/arm/mach-socfpga/timer_s10.c | 4 +- arch/arm/mach-socfpga/wrap_pll_config_soc64.c | 6 +-- arch/arm/mach-stm32mp/Makefile | 2 +- arch/arm/mach-stm32mp/bsec.c | 12 ++--- arch/arm/mach-stm32mp/stm32mp1/Makefile | 2 +- arch/arm/mach-stm32mp/stm32mp1/cpu.c | 6 +-- arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c | 4 +- arch/arm/mach-sunxi/Makefile | 2 +- arch/arm/mach-sunxi/board.c | 10 ++--- arch/arm/mach-sunxi/clock_sun4i.c | 4 +- arch/arm/mach-sunxi/clock_sun50i_h6.c | 4 +- arch/arm/mach-sunxi/clock_sun6i.c | 4 +- arch/arm/mach-sunxi/clock_sun8i_a83t.c | 4 +- arch/arm/mach-sunxi/clock_sun9i.c | 4 +- arch/arm/mach-sunxi/gtbus_sun9i.c | 2 +- arch/arm/mach-tegra/Makefile | 4 +- arch/arm/mach-tegra/board.c | 2 +- arch/arm/mach-tegra/board2.c | 2 +- arch/arm/mach-tegra/tegra114/Makefile | 2 +- arch/arm/mach-tegra/tegra124/Makefile | 4 +- arch/arm/mach-tegra/tegra20/Makefile | 2 +- arch/arm/mach-tegra/tegra30/Makefile | 2 +- arch/arm/mach-uniphier/Makefile | 2 +- arch/arm/mach-uniphier/arm32/Makefile | 2 +- .../mach-uniphier/boot-device/boot-device.c | 4 +- arch/arm/mach-uniphier/clk/Makefile | 2 +- arch/arm/mach-uniphier/debug-uart/Makefile | 2 +- .../arm/mach-uniphier/debug-uart/debug-uart.c | 4 +- arch/arm/mach-uniphier/dram/Makefile | 2 +- arch/arm/mach-zynq/Makefile | 2 +- arch/arm/mach-zynq/cpu.c | 2 +- arch/arm/mach-zynqmp/Makefile | 6 +-- arch/arm/mach-zynqmp/cpu.c | 4 +- arch/microblaze/config.mk | 2 +- arch/microblaze/cpu/Makefile | 2 +- arch/microblaze/cpu/start.S | 8 ++-- arch/mips/Makefile | 2 +- arch/mips/config.mk | 2 +- arch/mips/lib/Makefile | 2 +- arch/mips/mach-jz47xx/Makefile | 2 +- arch/mips/mach-jz47xx/include/mach/jz4780.h | 2 +- arch/mips/mach-jz47xx/jz4780/jz4780.c | 4 +- arch/mips/mach-jz47xx/start.S | 4 +- arch/mips/mach-mtmips/Makefile | 2 +- arch/mips/mach-mtmips/cpu.c | 2 +- arch/mips/mach-mtmips/mt7620/Makefile | 2 +- arch/mips/mach-mtmips/mt7621/Makefile | 2 +- arch/mips/mach-mtmips/mt7628/Makefile | 2 +- arch/powerpc/config.mk | 2 +- arch/powerpc/cpu/mpc83xx/Makefile | 2 +- arch/powerpc/cpu/mpc83xx/start.S | 6 +-- arch/powerpc/cpu/mpc85xx/Makefile | 4 +- arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 2 +- arch/powerpc/cpu/mpc85xx/start.S | 14 +++--- arch/powerpc/cpu/mpc85xx/tlb.c | 4 +- arch/powerpc/cpu/mpc8xxx/Makefile | 2 +- arch/powerpc/cpu/mpc8xxx/fsl_pamu.c | 4 +- arch/powerpc/cpu/mpc8xxx/law.c | 4 +- arch/powerpc/cpu/mpc8xxx/pamu_table.c | 2 +- arch/powerpc/include/asm/fsl_secure_boot.h | 8 ++-- arch/powerpc/lib/Makefile | 4 +- arch/riscv/cpu/fu540/Makefile | 2 +- arch/riscv/cpu/fu740/Makefile | 2 +- arch/riscv/cpu/jh7110/Makefile | 2 +- arch/riscv/cpu/start.S | 8 ++-- arch/riscv/lib/Makefile | 2 +- arch/riscv/lib/sifive_cache.c | 4 +- arch/sandbox/cpu/Makefile | 2 +- arch/sandbox/cpu/cpu.c | 2 +- arch/sandbox/cpu/start.c | 2 +- arch/x86/Makefile | 2 +- arch/x86/config.mk | 8 ++-- arch/x86/cpu/Makefile | 2 +- arch/x86/cpu/apollolake/Makefile | 10 ++--- arch/x86/cpu/apollolake/fsp_bindings.c | 4 +- arch/x86/cpu/broadwell/Makefile | 4 +- arch/x86/cpu/broadwell/cpu_full.c | 2 +- arch/x86/cpu/broadwell/pch.c | 2 +- arch/x86/cpu/config.mk | 2 +- arch/x86/cpu/coreboot/Makefile | 2 +- arch/x86/cpu/coreboot/coreboot.c | 2 +- arch/x86/cpu/cpu.c | 2 +- arch/x86/cpu/intel_common/Makefile | 6 +-- arch/x86/cpu/ivybridge/Makefile | 2 +- arch/x86/include/asm/string.h | 2 +- arch/x86/lib/Makefile | 10 ++--- arch/x86/lib/fsp/Makefile | 2 +- board/BuR/brppt1/Makefile | 2 +- board/BuR/brppt1/board.c | 4 +- board/BuR/brppt2/board.c | 6 +-- board/BuR/brppt2/config.mk | 2 +- board/BuR/brsmarc1/Makefile | 2 +- board/BuR/brsmarc1/board.c | 8 ++-- board/BuR/brxre1/Makefile | 2 +- board/BuR/brxre1/board.c | 4 +- board/BuR/common/common.c | 4 +- board/CZ.NIC/turris_1x/Makefile | 2 +- board/CZ.NIC/turris_1x/tlb.c | 2 +- board/CZ.NIC/turris_omnia/Makefile | 2 +- board/CZ.NIC/turris_omnia/turris_omnia.c | 2 +- board/Synology/ds414/Makefile | 2 +- board/advantech/imx8mp_rsb3720a1/Makefile | 4 +- board/advantech/imx8qm_dmsse20_a1/Makefile | 2 +- board/advantech/imx8qm_rom7720_a1/Makefile | 2 +- board/alliedtelesis/x530/Makefile | 2 +- board/asus/grouper/Makefile | 2 +- board/asus/transformer-t30/Makefile | 2 +- .../atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +- board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 +- board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 +- .../atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 2 +- .../sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c | 2 +- board/atmel/sama5d2_icp/sama5d2_icp.c | 2 +- .../atmel/sama5d2_xplained/sama5d2_xplained.c | 2 +- .../atmel/sama5d3_xplained/sama5d3_xplained.c | 2 +- board/atmel/sama5d3xek/sama5d3xek.c | 2 +- .../atmel/sama5d4_xplained/sama5d4_xplained.c | 2 +- board/atmel/sama5d4ek/sama5d4ek.c | 2 +- board/avionic-design/tec-ng/Makefile | 2 +- board/beacon/imx8mm/Makefile | 2 +- board/beacon/imx8mn/Makefile | 2 +- board/beacon/imx8mp/Makefile | 2 +- board/bitmain/antminer_s9/Makefile | 2 +- board/bosch/acc/acc.c | 2 +- board/bosch/shc/board.c | 4 +- board/bsh/imx6ulz_smm_m2/Makefile | 2 +- board/bsh/imx8mn_smm_s2/Makefile | 2 +- board/bticino/mamoj/Makefile | 2 +- board/cloos/imx8mm_phg/Makefile | 2 +- board/compulab/cl-som-imx7/Makefile | 2 +- board/compulab/cl-som-imx7/common.h | 4 +- board/compulab/cl-som-imx7/mux.c | 4 +- board/compulab/cm_fx6/Makefile | 2 +- board/compulab/cm_t43/Makefile | 2 +- board/compulab/imx8mm-cl-iot-gate/Makefile | 2 +- .../compulab/imx8mm-cl-iot-gate/eeprom_spl.c | 2 +- board/comvetia/lxr2/lxr2.c | 2 +- .../conclusive/kstr-sama5d27/kstr-sama5d27.c | 2 +- board/congatec/cgtqmx8/Makefile | 2 +- board/congatec/common/Makefile | 2 +- board/data_modul/common/common.c | 2 +- board/data_modul/imx8mm_edm_sbc/Makefile | 2 +- board/data_modul/imx8mp_edm_sbc/Makefile | 2 +- board/davinci/da8xxevm/omapl138_lcdk.c | 2 +- board/dhelectronics/dh_imx6/Makefile | 2 +- board/dhelectronics/dh_imx8mp/Makefile | 2 +- board/dhelectronics/dh_stm32mp1/board.c | 6 +-- board/ea/mx7ulp_com/mx7ulp_com.c | 2 +- board/eets/pdu001/board.c | 2 +- board/embest/mx6boards/mx6boards.c | 2 +- board/engicam/common/Makefile | 2 +- board/engicam/imx8mm/Makefile | 2 +- board/engicam/imx8mp/Makefile | 2 +- board/engicam/stm32mp1/Makefile | 2 +- board/firefly/firefly-rk3288/firefly-rk3288.c | 2 +- board/firefly/roc-pc-rk3399/roc-pc-rk3399.c | 2 +- board/freescale/common/Makefile | 6 +-- board/freescale/common/cmd_esbc_validate.c | 2 +- board/freescale/common/fsl_chain_of_trust.c | 8 ++-- board/freescale/common/fsl_validate.c | 4 +- board/freescale/common/qixis.c | 2 +- board/freescale/imx8mm_evk/Makefile | 2 +- board/freescale/imx8mn_evk/Makefile | 2 +- board/freescale/imx8mp_evk/Makefile | 2 +- board/freescale/imx8mq_evk/Makefile | 2 +- board/freescale/imx8qm_mek/Makefile | 2 +- board/freescale/imx8qxp_mek/Makefile | 2 +- board/freescale/imx8ulp_evk/Makefile | 2 +- board/freescale/imx93_evk/Makefile | 2 +- board/freescale/imxrt1020-evk/imxrt1020-evk.c | 2 +- board/freescale/imxrt1050-evk/imxrt1050-evk.c | 2 +- board/freescale/imxrt1170-evk/imxrt1170-evk.c | 2 +- board/freescale/ls1012afrdm/ls1012afrdm.c | 2 +- board/freescale/ls1012aqds/ls1012aqds.c | 2 +- board/freescale/ls1012ardb/ls1012ardb.c | 2 +- board/freescale/ls1021aiot/ls1021aiot.c | 4 +- board/freescale/ls1021aqds/ddr.c | 4 +- board/freescale/ls1021aqds/ls1021aqds.c | 2 +- board/freescale/ls1021atsn/ls1021atsn.c | 10 ++--- board/freescale/ls1021atwr/ls1021atwr.c | 10 ++--- board/freescale/ls1028a/ls1028a.c | 2 +- board/freescale/ls1043aqds/Makefile | 2 +- board/freescale/ls1043aqds/ddr.c | 2 +- board/freescale/ls1043aqds/ls1043aqds.c | 2 +- board/freescale/ls1043ardb/Makefile | 2 +- board/freescale/ls1043ardb/ddr.c | 4 +- board/freescale/ls1043ardb/ls1043ardb.c | 2 +- board/freescale/ls1046aqds/Makefile | 2 +- board/freescale/ls1046aqds/ddr.c | 2 +- board/freescale/ls1046aqds/ls1046aqds.c | 2 +- board/freescale/ls1046ardb/Makefile | 2 +- board/freescale/ls1046ardb/ddr.c | 2 +- board/freescale/ls1046ardb/ls1046ardb.c | 2 +- board/freescale/ls1088a/Makefile | 2 +- board/freescale/ls1088a/ddr.c | 6 +-- board/freescale/ls1088a/ls1088a.c | 8 ++-- board/freescale/ls2080aqds/ddr.c | 2 +- board/freescale/ls2080aqds/ls2080aqds.c | 4 +- board/freescale/ls2080ardb/ddr.c | 2 +- board/freescale/ls2080ardb/eth_ls2080rdb.c | 2 +- board/freescale/lx2160a/lx2160a.c | 2 +- board/freescale/mx23evk/Makefile | 2 +- board/freescale/mx28evk/Makefile | 2 +- board/freescale/mx6memcal/Makefile | 2 +- board/freescale/mx6sabreauto/mx6sabreauto.c | 2 +- board/freescale/mx6sabresd/mx6sabresd.c | 2 +- board/freescale/mx6slevk/mx6slevk.c | 4 +- .../mx6ul_14x14_evk/mx6ul_14x14_evk.c | 4 +- board/freescale/p1010rdb/Makefile | 4 +- board/freescale/p1010rdb/p1010rdb.c | 2 +- board/freescale/p1010rdb/tlb.c | 2 +- board/freescale/p1_p2_rdb_pc/Makefile | 4 +- board/freescale/p1_p2_rdb_pc/tlb.c | 2 +- board/freescale/t102xrdb/Makefile | 2 +- board/freescale/t102xrdb/ddr.c | 4 +- board/freescale/t102xrdb/tlb.c | 4 +- board/freescale/t104xrdb/Makefile | 2 +- board/freescale/t104xrdb/ddr.c | 4 +- board/freescale/t104xrdb/tlb.c | 6 +-- board/freescale/t208xqds/Makefile | 2 +- board/freescale/t208xqds/ddr.c | 2 +- board/freescale/t208xqds/tlb.c | 4 +- board/freescale/t208xrdb/Makefile | 2 +- board/freescale/t208xrdb/ddr.c | 2 +- board/freescale/t208xrdb/tlb.c | 4 +- board/freescale/t4rdb/Makefile | 2 +- board/freescale/t4rdb/cpld.c | 2 +- board/freescale/t4rdb/ddr.c | 2 +- board/freescale/t4rdb/tlb.c | 4 +- board/gardena/smart-gateway-at91sam/Makefile | 2 +- board/gardena/smart-gateway-mt7688/board.c | 2 +- board/gateworks/gw_ventana/Makefile | 2 +- board/gateworks/gw_ventana/eeprom.c | 2 +- board/gateworks/venice/Makefile | 2 +- board/gdsys/a38x/Makefile | 2 +- board/gdsys/a38x/controlcenterdc.c | 12 ++--- board/ge/b1x5v2/b1x5v2.c | 4 +- board/ge/b1x5v2/spl.c | 2 +- board/google/chromebook_coral/coral.c | 2 +- board/google/gru/gru.c | 4 +- board/google/imx8mq_phanbell/Makefile | 2 +- board/google/veyron/veyron.c | 2 +- board/grinn/chiliboard/board.c | 2 +- board/grinn/liteboard/board.c | 2 +- board/htc/endeavoru/Makefile | 2 +- board/imgtec/ci20/ci20.c | 4 +- board/isee/igep003x/Makefile | 2 +- board/isee/igep003x/board.c | 2 +- board/isee/igep00x0/Makefile | 2 +- board/k+p/kp_imx6q_tpc/Makefile | 2 +- board/kontron/pitx_imx8m/Makefile | 2 +- board/kontron/sl-mx6ul/Makefile | 2 +- board/kontron/sl-mx8mm/Makefile | 2 +- board/kontron/sl28/Makefile | 4 +- board/kontron/sl28/ddr.c | 2 +- board/kosagi/novena/Makefile | 2 +- board/lenovo/ideapad-yoga-11/Makefile | 2 +- board/lg/sniper/sniper.c | 2 +- board/lg/x3-t30/Makefile | 2 +- board/liebherr/display5/Makefile | 2 +- board/liebherr/mccmon6/Makefile | 2 +- board/liebherr/xea/Makefile | 2 +- board/liebherr/xea/xea.c | 6 +-- board/logicpd/am3517evm/am3517evm.c | 2 +- board/logicpd/imx6/imx6logic.c | 2 +- board/logicpd/omap3som/omap3logic.c | 2 +- board/menlo/m53menlo/m53menlo.c | 2 +- board/menlo/mx8menlo/Makefile | 4 +- board/microsoft/surface-rt/Makefile | 2 +- board/mntre/imx8mq_reform2/Makefile | 2 +- board/msc/sm2s_imx8mp/Makefile | 2 +- board/myir/mys_6ulx/Makefile | 2 +- board/nvidia/beaver/Makefile | 2 +- board/nvidia/cardhu/Makefile | 2 +- board/olimex/mx23_olinuxino/Makefile | 2 +- board/opalkelly/zynq/Makefile | 2 +- board/phytec/common/Makefile | 2 +- board/phytec/pcl063/Makefile | 2 +- board/phytec/pcm058/pcm058.c | 2 +- board/phytec/phycore_am335x_r2/Makefile | 2 +- board/phytec/phycore_am335x_r2/board.c | 2 +- board/phytec/phycore_am62x/phycore-am62x.c | 2 +- board/phytec/phycore_imx8mm/Makefile | 2 +- board/phytec/phycore_imx8mp/Makefile | 2 +- board/phytec/phycore_imx93/Makefile | 2 +- board/polyhex/imx8mp_debix_model_a/Makefile | 2 +- board/purism/librem5/Makefile | 2 +- board/purism/librem5/librem5.h | 4 +- board/radxa/rockpi4-rk3399/rockpi4-rk3399.c | 4 +- board/renesas/alt/Makefile | 2 +- board/renesas/condor/Makefile | 2 +- board/renesas/draak/Makefile | 2 +- board/renesas/eagle/Makefile | 2 +- board/renesas/ebisu/Makefile | 2 +- board/renesas/falcon/Makefile | 2 +- board/renesas/gose/Makefile | 2 +- board/renesas/koelsch/Makefile | 2 +- board/renesas/lager/Makefile | 2 +- board/renesas/porter/Makefile | 2 +- board/renesas/salvator-x/Makefile | 2 +- board/renesas/silk/Makefile | 2 +- board/renesas/stout/Makefile | 2 +- board/renesas/ulcb/Makefile | 2 +- board/renesas/v3hsk/Makefile | 2 +- board/renesas/v3msk/Makefile | 2 +- board/ronetix/imx7-cm/Makefile | 2 +- board/ronetix/imx8mq-cm/Makefile | 2 +- board/samsung/common/Makefile | 2 +- board/samsung/origen/Makefile | 2 +- board/samsung/smdkv310/Makefile | 2 +- board/seeed/npi_imx6ull/Makefile | 2 +- board/sielaff/imx6dl-sielaff/Makefile | 2 +- board/siemens/capricorn/Makefile | 2 +- board/siemens/capricorn/board.c | 8 ++-- board/siemens/common/board_am335x.c | 12 ++--- board/siemens/common/board_am335x.h | 4 +- board/siemens/common/factoryset.c | 4 +- board/siemens/corvus/board.c | 2 +- board/siemens/draco/Makefile | 4 +- board/siemens/draco/board.c | 14 +++--- board/siemens/pxm2/Makefile | 4 +- board/siemens/pxm2/board.c | 14 +++--- board/siemens/rut/Makefile | 4 +- board/siemens/rut/board.c | 8 ++-- board/siemens/smartweb/smartweb.c | 2 +- board/siemens/taurus/taurus.c | 4 +- board/sifive/unleashed/Makefile | 2 +- board/sifive/unmatched/Makefile | 2 +- board/silinux/ek874/Makefile | 2 +- board/softing/vining_2000/vining_2000.c | 2 +- board/softing/vining_fpga/socfpga.c | 2 +- board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 +- board/st/common/cmd_stboard.c | 2 +- board/st/stm32f746-disco/stm32f746-disco.c | 4 +- board/st/stm32mp1/Makefile | 2 +- board/starfive/visionfive2/Makefile | 2 +- board/sunxi/board.c | 6 +-- board/tcl/sl50/board.c | 14 +++--- board/technexion/pico-imx6/spl.c | 2 +- board/technexion/pico-imx6ul/spl.c | 2 +- board/technexion/pico-imx7d/spl.c | 2 +- board/technexion/pico-imx8mq/Makefile | 2 +- board/theadorable/theadorable.c | 6 +-- .../theobroma-systems/jaguar_rk3588/Makefile | 2 +- board/theobroma-systems/puma_rk3399/Makefile | 2 +- .../theobroma-systems/ringneck_px30/Makefile | 2 +- board/theobroma-systems/tiger_rk3588/Makefile | 2 +- board/ti/am335x/board.c | 12 ++--- board/ti/am57xx/board.c | 10 ++--- board/ti/am62x/evm.c | 2 +- board/ti/am64x/evm.c | 2 +- board/ti/common/board_detect.c | 6 +-- board/ti/dra7xx/evm.c | 6 +-- board/ti/j721e/evm.c | 6 +-- board/ti/j721s2/evm.c | 4 +- board/ti/ks2_evm/board.c | 2 +- board/ti/ks2_evm/board_k2e.c | 2 +- board/ti/ks2_evm/board_k2g.c | 4 +- board/ti/ks2_evm/board_k2hk.c | 2 +- board/ti/ks2_evm/board_k2l.c | 2 +- board/ti/omap3evm/evm.c | 4 +- board/timll/devkit8000/devkit8000.c | 2 +- board/topic/zynq/Makefile | 2 +- board/toradex/apalis_imx6/apalis_imx6.c | 12 ++--- board/toradex/apalis_imx6/do_fuse.c | 4 +- board/toradex/apalis_imx6/pf0100.c | 4 +- board/toradex/apalis_t30/Makefile | 2 +- board/toradex/colibri_imx6/colibri_imx6.c | 12 ++--- board/toradex/colibri_imx6/do_fuse.c | 4 +- board/toradex/colibri_imx6/pf0100.c | 4 +- board/toradex/colibri_t30/Makefile | 2 +- board/toradex/common/Makefile | 2 +- board/toradex/verdin-imx8mm/Makefile | 2 +- board/toradex/verdin-imx8mp/Makefile | 2 +- board/udoo/neo/neo.c | 2 +- board/udoo/udoo_spl.c | 2 +- board/variscite/common/imx9_eeprom.c | 2 +- board/variscite/dart_6ul/Makefile | 2 +- board/variscite/imx8mn_var_som/Makefile | 2 +- .../variscite/imx8mn_var_som/imx8mn_var_som.c | 4 +- board/variscite/imx93_var_som/Makefile | 2 +- board/vscom/baltos/board.c | 14 +++--- board/wandboard/Makefile | 2 +- board/wexler/qc750/Makefile | 2 +- board/work-microwave/work_92105/Makefile | 2 +- board/xilinx/common/Makefile | 2 +- board/xilinx/common/board.c | 6 +-- .../microblaze-generic/microblaze-generic.c | 2 +- board/xilinx/zynq/Makefile | 6 +-- board/xilinx/zynq/board.c | 4 +- board/xilinx/zynqmp/Makefile | 6 +-- board/xilinx/zynqmp/zynqmp.c | 6 +-- boot/Makefile | 2 +- boot/image-android-dt.c | 2 +- boot/image-android.c | 2 +- boot/image-fit-sig.c | 2 +- cmd/Makefile | 4 +- cmd/nvedit.c | 12 ++--- common/Makefile | 12 ++--- common/cli_readline.c | 2 +- common/console.c | 2 +- common/hash.c | 2 +- common/spl/Makefile | 2 +- common/splash_source.c | 2 +- config.mk | 2 +- disk/part.c | 2 +- disk/part_dos.c | 2 +- doc/develop/distro.rst | 4 +- doc/develop/qconfig.rst | 2 +- doc/develop/tests_sandbox.rst | 2 +- drivers/Makefile | 4 +- drivers/block/Makefile | 2 +- drivers/bus/Makefile | 2 +- drivers/clk/altera/clk-agilex.c | 2 +- drivers/clk/altera/clk-agilex5.c | 2 +- drivers/clk/altera/clk-n5x.c | 2 +- drivers/clk/clk-uclass.c | 2 +- drivers/clk/clk_vexpress_osc.c | 4 +- drivers/clk/clk_zynq.c | 22 +++++----- drivers/clk/imx/clk-imx8mm.c | 6 +-- drivers/clk/imx/clk-imx8mn.c | 6 +-- drivers/clk/imx/clk-imxrt1020.c | 2 +- drivers/clk/imx/clk-imxrt1050.c | 2 +- drivers/clk/rockchip/clk_px30.c | 6 +-- drivers/clk/rockchip/clk_rk3188.c | 6 +-- drivers/clk/rockchip/clk_rk3288.c | 8 ++-- drivers/clk/rockchip/clk_rk3328.c | 4 +- drivers/clk/rockchip/clk_rk3368.c | 14 +++--- drivers/clk/rockchip/clk_rk3399.c | 10 ++--- drivers/clk/rockchip/clk_rk3568.c | 10 ++--- drivers/clk/rockchip/clk_rk3588.c | 14 +++--- drivers/clk/sifive/sifive-prci.c | 2 +- drivers/clk/starfive/clk-jh7110-pll.c | 4 +- drivers/clk/stm32/clk-stm32mp1.c | 6 +-- drivers/core/ofnode.c | 4 +- drivers/crypto/fsl/jobdesc.c | 2 +- drivers/crypto/fsl/jr.c | 6 +-- drivers/ddr/altera/sdram_gen5.c | 4 +- drivers/ddr/fsl/lc_common_dimm_params.c | 6 +-- drivers/ddr/fsl/main.c | 6 +-- drivers/ddr/imx/imx8m/Makefile | 2 +- drivers/ddr/imx/imx8ulp/Makefile | 2 +- drivers/ddr/imx/imx9/Makefile | 2 +- drivers/ddr/imx/phy/Makefile | 2 +- drivers/ddr/marvell/a38x/Makefile | 44 +++++++++---------- drivers/ddr/marvell/a38x/old/Makefile | 28 ++++++------ drivers/ddr/marvell/axp/Makefile | 20 ++++----- drivers/firmware/firmware-zynqmp.c | 10 ++--- drivers/fpga/intel_sdm_mb.c | 2 +- drivers/fpga/zynqpl.c | 6 +-- drivers/gpio/Makefile | 2 +- drivers/gpio/gpio-uclass.c | 4 +- drivers/gpio/pca953x.c | 2 +- drivers/gpio/rk_gpio.c | 4 +- drivers/gpio/s5p_gpio.c | 10 ++--- drivers/gpio/sunxi_gpio.c | 2 +- drivers/gpio/tca642x.c | 2 +- drivers/gpio/tegra_gpio.c | 2 +- drivers/input/Makefile | 2 +- drivers/mailbox/zynqmp-ipi.c | 6 +-- drivers/misc/Makefile | 6 +-- drivers/misc/gsc.c | 2 +- drivers/misc/imx8/scu.c | 2 +- drivers/mmc/Makefile | 2 +- drivers/mmc/mmc-uclass.c | 4 +- drivers/mmc/mmc.c | 20 ++++----- drivers/mmc/mmc_legacy.c | 4 +- drivers/mmc/mmc_private.h | 2 +- drivers/mmc/omap_hsmmc.c | 4 +- drivers/mmc/rockchip_dw_mmc.c | 2 +- drivers/mmc/rockchip_sdhci.c | 2 +- drivers/mmc/socfpga_dw_mmc.c | 2 +- drivers/mmc/tmio-common.c | 2 +- drivers/mmc/uniphier-sd.c | 4 +- drivers/mmc/zynq_sdhci.c | 6 +-- drivers/mtd/Makefile | 2 +- drivers/mtd/nand/Makefile | 2 +- drivers/mtd/nand/raw/Makefile | 2 +- drivers/mtd/nand/raw/atmel_nand.c | 4 +- drivers/mtd/nand/raw/lpc32xx_nand_mlc.c | 6 +-- drivers/mtd/nand/raw/lpc32xx_nand_slc.c | 8 ++-- drivers/mtd/nand/raw/nand_base.c | 10 ++--- drivers/mtd/nand/raw/omap_gpmc.c | 4 +- drivers/mtd/nand/raw/sand_nand.c | 2 +- drivers/mtd/onenand/Makefile | 2 +- drivers/mtd/spi/Makefile | 2 +- drivers/mtd/spi/sf-uclass.c | 2 +- drivers/mtd/spi/sf_dataflash.c | 2 +- drivers/mtd/spi/spi-nor-core.c | 4 +- drivers/net/dwc_eth_xgmac_socfpga.c | 2 +- drivers/net/dwmac_socfpga.c | 2 +- drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 4 +- drivers/pinctrl/pinctrl_stm32.c | 4 +- drivers/pinctrl/tegra/Makefile | 2 +- drivers/pinctrl/uniphier/pinctrl-uniphier.h | 2 +- drivers/power/Makefile | 2 +- drivers/power/pmic/rk8xx.c | 4 +- drivers/power/pmic/stpmic1.c | 6 +-- drivers/power/power_core.c | 2 +- drivers/power/regulator/rk8xx.c | 2 +- drivers/power/sy8106a.c | 2 +- drivers/ram/Makefile | 2 +- drivers/ram/mediatek/ddr3-mt7629.c | 4 +- drivers/ram/rockchip/sdram_rk3188.c | 12 ++--- drivers/ram/rockchip/sdram_rk3288.c | 12 ++--- drivers/ram/rockchip/sdram_rk3399.c | 2 +- drivers/ram/rockchip/sdram_rv1126.c | 6 +-- drivers/ram/sifive/sifive_ddr.c | 6 +-- drivers/ram/starfive/Makefile | 4 +- drivers/ram/stm32mp1/stm32mp1_ram.c | 2 +- drivers/reset/reset-socfpga.c | 2 +- drivers/scsi/Makefile | 4 +- drivers/serial/Makefile | 2 +- drivers/serial/atmel_usart.c | 2 +- drivers/serial/ns16550.c | 4 +- drivers/serial/serial-uclass.c | 2 +- drivers/serial/serial.c | 2 +- drivers/serial/serial_s5p.c | 2 +- drivers/serial/serial_zynq.c | 2 +- drivers/spi/designware_spi.c | 4 +- drivers/spi/rockchip_sfc.c | 2 +- drivers/sysreset/sysreset_ast.c | 2 +- drivers/usb/cdns3/core.c | 6 +-- drivers/usb/gadget/Makefile | 4 +- drivers/usb/gadget/f_sdp.c | 10 ++--- drivers/usb/mtu3/mtu3_plat.c | 4 +- dts/Makefile | 2 +- env/Makefile | 2 +- env/common.c | 4 +- env/fat.c | 4 +- env/flash.c | 6 +-- env/mmc.c | 6 +-- env/nand.c | 8 ++-- env/nowhere.c | 2 +- env/sf.c | 2 +- fs/Makefile | 2 +- fs/fs.c | 6 +-- include/asm-generic/global_data.h | 2 +- include/bootcount.h | 4 +- include/config_distro_bootcmd.h | 10 ++--- include/configs/P1010RDB.h | 4 +- include/configs/am335x_evm.h | 4 +- include/configs/am335x_guardian.h | 4 +- include/configs/am335x_shc.h | 4 +- include/configs/am43xx_evm.h | 4 +- include/configs/am57xx_evm.h | 2 +- include/configs/capricorn-common.h | 4 +- include/configs/cgtqmx8.h | 2 +- include/configs/da850evm.h | 2 +- include/configs/dra7xx_evm.h | 4 +- include/configs/ds116.h | 4 +- include/configs/ds414.h | 4 +- .../configs/gardena-smart-gateway-mt7688.h | 2 +- include/configs/imx6q-bosch-acc.h | 2 +- include/configs/imx6ulz_smm_m2.h | 4 +- include/configs/imx8mm-cl-iot-gate.h | 2 +- include/configs/imx8mm_beacon.h | 2 +- include/configs/imx8mm_data_modul_edm_sbc.h | 2 +- include/configs/imx8mm_evk.h | 2 +- include/configs/imx8mm_icore_mx8mm.h | 4 +- include/configs/imx8mm_phg.h | 2 +- include/configs/imx8mm_venice.h | 2 +- include/configs/imx8mp_rsb3720.h | 2 +- include/configs/imx8mq_cm.h | 2 +- include/configs/imx8mq_evk.h | 2 +- include/configs/imx8mq_phanbell.h | 2 +- include/configs/imx8mq_reform2.h | 2 +- include/configs/imx8qm_mek.h | 2 +- include/configs/imx8qxp_mek.h | 2 +- include/configs/imx8ulp_evk.h | 2 +- include/configs/imx93_evk.h | 2 +- include/configs/kontron-sl-mx8mm.h | 4 +- include/configs/kontron_pitx_imx8m.h | 2 +- include/configs/librem5.h | 2 +- include/configs/linkit-smart-7688.h | 2 +- include/configs/ls1043a_common.h | 6 +-- include/configs/ls1046a_common.h | 6 +-- include/configs/ls1088a_common.h | 2 +- include/configs/msc_sm2s_imx8mp.h | 2 +- include/configs/mt7621.h | 2 +- include/configs/mt7628.h | 2 +- include/configs/n2350.h | 4 +- include/configs/p1_p2_rdb_pc.h | 4 +- include/configs/phycore_imx8mm.h | 2 +- include/configs/pico-imx8mq.h | 2 +- include/configs/rk3399_common.h | 4 +- include/configs/rockchip-common.h | 2 +- include/configs/socfpga_common.h | 2 +- include/configs/stm32mp15_common.h | 4 +- include/configs/stm32mp15_dh_dhsom.h | 2 +- include/configs/ti_omap3_common.h | 2 +- include/configs/ti_omap4_common.h | 2 +- include/configs/turris_1x.h | 4 +- include/configs/turris_omnia.h | 4 +- include/configs/verdin-imx8mm.h | 2 +- include/configs/verdin-imx8mp.h | 4 +- include/configs/vining_2000.h | 2 +- include/configs/xilinx_zynqmp.h | 2 +- include/configs/zynq-common.h | 4 +- include/env.h | 2 +- include/env_callback.h | 2 +- include/fdtdec.h | 2 +- include/image-android-dt.h | 2 +- include/iotrace.h | 2 +- include/linux/kconfig.h | 18 ++++---- include/log.h | 2 +- include/mmc.h | 2 +- include/mtd/cfi_flash.h | 2 +- include/net.h | 6 +-- include/part.h | 2 +- include/sdp.h | 2 +- include/search.h | 2 +- include/spl.h | 14 +++--- include/stdio.h | 4 +- include/sunxi_gpio.h | 2 +- include/upl.h | 4 +- include/vbe.h | 2 +- lib/Makefile | 6 +-- lib/crypto/Makefile | 4 +- lib/display_options.c | 2 +- lib/fdtdec.c | 4 +- lib/hang.c | 2 +- lib/hashtable.c | 4 +- lib/hexdump.c | 2 +- lib/uuid.c | 2 +- net/bootp.c | 2 +- net/net.c | 8 ++-- scripts/Kbuild.include | 2 +- scripts/Makefile.xpl | 4 +- test/Makefile | 2 +- test/cmd_ut.c | 2 +- test/dm/Makefile | 2 +- test/lib/Makefile | 2 +- test/test-main.c | 2 +- tools/binman/test/generated/autoconf.h | 2 +- 791 files changed, 1391 insertions(+), 1391 deletions(-)
diff --git a/README b/README index 4be1e8c22a0..a88e14a0449 100644 --- a/README +++ b/README @@ -1508,13 +1508,13 @@ Low Level (hardware related) configuration options: This only takes effect if the memory commands are activated globally (CONFIG_CMD_MEMORY).
-- CONFIG_SPL_BUILD +- CONFIG_XPL_BUILD Set when the currently running compilation is for an artifact that will end up in one of the 'xPL' builds, i.e. SPL, TPL or VPL. Code that needs phase-specific behaviour can check this, or (where possible) use spl_phase() instead.
- Note that CONFIG_SPL_BUILD *is* always defined when either + Note that CONFIG_XPL_BUILD *is* always defined when either of CONFIG_TPL_BUILD / CONFIG_VPL_BUILD is defined. This can be counter-intuitive and should perhaps be changed.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index dbeedbe544b..cb87a684754 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+
-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_ARCH_TEGRA),yy) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_ARCH_TEGRA),yy) CONFIG_CPU_V7A= CONFIG_CPU_ARM720T=y endif @@ -24,7 +24,7 @@ endif
# On Tegra systems we must build SPL for the armv4 core on the device # but otherwise we can use the value in CONFIG_SYS_ARM_ARCH -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_ARCH_TEGRA),yy) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_ARCH_TEGRA),yy) arch-y += -D__LINUX_ARM_ARCH__=4 else arch-y += -D__LINUX_ARM_ARCH__=$(CONFIG_SYS_ARM_ARCH) @@ -106,7 +106,7 @@ libs-y += $(machdirs)
head-y := arch/arm/cpu/$(CPU)/start.o
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) ifeq ($(CONFIG_SYS_SOC)$(CONFIG_SPL_FRAMEWORK),"mxs") head-y := arch/arm/cpu/arm926ejs/mxs/start.o endif diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 5530d02b66c..084fd399931 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -99,7 +99,7 @@ PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARM) $(PF_CPPFLAGS_ABI) ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS))) # This file is parsed many times, so the string may get added multiple # times. Also, the prefix needs to be different based on whether -# CONFIG_SPL_BUILD is defined or not. 'filter-out' the existing entry +# CONFIG_XPL_BUILD is defined or not. 'filter-out' the existing entry # before adding the correct one. PLATFORM_LIBS := arch/arm/lib/eabi_compat.o \ $(filter-out arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS)) @@ -126,7 +126,7 @@ PLATFORM_RELFLAGS += -fno-optimize-sibling-calls endif endif
-ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) # Check that only R_ARM_RELATIVE relocations are generated. INPUTS-y += checkarmreloc # The movt / movw can hardcode 16 bit parts of the addresses in the @@ -160,7 +160,7 @@ endif ifdef CONFIG_MACH_IMX ifneq ($(CONFIG_IMX_CONFIG),"") ifdef CONFIG_SPL -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD INPUTS-y += SPL endif else diff --git a/arch/arm/cpu/arm11/Makefile b/arch/arm/cpu/arm11/Makefile index 5dfa01ae8d0..38a3e4d95e2 100644 --- a/arch/arm/cpu/arm11/Makefile +++ b/arch/arm/cpu/arm11/Makefile @@ -5,6 +5,6 @@
obj-y = cpu.o
-ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_EFI_LOADER) += sctlr.o endif diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 78a9cc173a3..d3ab5928eee 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -65,7 +65,7 @@ cpu_init_crit: * When booting from NAND - it has definitely been a reset, so, no need * to flush caches and disable the MMU */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * flush v4 I/D caches */ diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile index 8cfe3f0fbbc..75513889c5d 100644 --- a/arch/arm/cpu/arm926ejs/Makefile +++ b/arch/arm/cpu/arm926ejs/Makefile @@ -6,7 +6,7 @@ extra-y = start.o obj-y = cpu.o cache.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_SPL_NO_CPU_SUPPORT extra-y := endif diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile index 1638ef8fd8d..f633e54ba62 100644 --- a/arch/arm/cpu/arm926ejs/mxs/Makefile +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile @@ -3,11 +3,11 @@ # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-extra-$(CONFIG_SPL_BUILD) := start.o +extra-$(CONFIG_XPL_BUILD) := start.o
obj-y = clock.o mxs.o iomux.o timer.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o endif
diff --git a/arch/arm/cpu/arm926ejs/sunxi/config.mk b/arch/arm/cpu/arm926ejs/sunxi/config.mk index 76ffec9df6a..50899d20316 100644 --- a/arch/arm/cpu/arm926ejs/sunxi/config.mk +++ b/arch/arm/cpu/arm926ejs/sunxi/config.mk @@ -1,6 +1,6 @@ # Build a combined spl + u-boot image ifdef CONFIG_SPL -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ALL-y += u-boot-sunxi-with-spl.bin endif endif diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 99cf9eb515f..0e7d769bd40 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -12,7 +12,7 @@ obj-y += syslib.o
obj-$(CONFIG_SYS_ARM_MPU) += mpu_v7r.o
-ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_EFI_LOADER) += sctlr.o obj-$(CONFIG_ARMV7_NONSEC) += exception_level.o endif diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c index aa981faef00..8082f369ed6 100644 --- a/arch/arm/cpu/armv7/cpu.c +++ b/arch/arm/cpu/armv7/cpu.c @@ -32,7 +32,7 @@ int cleanup_before_linux_select(int flags) * * we turn off caches etc ... */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD disable_interrupts(); #endif
diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S index 3c8c07fe016..a6c844b7e3d 100644 --- a/arch/arm/cpu/armv7/lowlevel_init.S +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -26,7 +26,7 @@ WEAK(lowlevel_init) /* * Setup a temporary stack. Global data is not available yet. */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK) ldr sp, =CONFIG_SPL_STACK #else ldr sp, =SYS_INIT_SP_ADDR @@ -39,7 +39,7 @@ WEAK(lowlevel_init) * Set up global data for boards that still need it. This will be * removed soon. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD ldr r9, =gdata #else sub sp, sp, #GD_SIZE diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile index 0985420fe5c..4660ff0057e 100644 --- a/arch/arm/cpu/armv7/s5p-common/Makefile +++ b/arch/arm/cpu/armv7/s5p-common/Makefile @@ -8,7 +8,7 @@ ifdef CONFIG_ARCH_NEXELL obj-$(CONFIG_S5P4418_ONEWIRE) += pwm.o else obj-y += cpu_info.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += timer.o obj-y += sromc.o endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 7730a16e512..b63481b43ca 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -279,7 +279,7 @@ ENTRY(cpu_init_cp15) orr r2, r4, r2 @ r2 has combined CPU variant + revision
/* Early stack for ERRATA that needs into call C code */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK) ldr r0, =(CONFIG_SPL_STACK) #else ldr r0, =(SYS_INIT_SP_ADDR) diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 3e975b366c4..0624e93efde 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -12,10 +12,10 @@ obj-$(CONFIG_MACH_SUN8I_H3) += tzpc.o obj-$(CONFIG_MACH_SUN6I) += sram.o obj-$(CONFIG_MACH_SUN8I) += sram.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ARMV7_PSCI) += psci.o endif
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += fel_utils.o endif diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index bba4f570dbb..722ec89d239 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -13,7 +13,7 @@ ifndef CONFIG_$(SPL_)SYS_DCACHE_OFF obj-y += cache_v8.o obj-y += cache.o endif -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) += exceptions.o else obj-y += exceptions.o @@ -27,14 +27,14 @@ endif obj-y += cpu-dt.o obj-$(CONFIG_ARM_SMCCC) += smccc-call.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ARMV8_SPIN_TABLE) += spin_table.o spin_table_v8.o else obj-$(CONFIG_ARCH_SUNXI) += fel_utils.o endif obj-$(CONFIG_$(SPL_)ARMV8_SEC_FIRMWARE_SUPPORT) += sec_firmware.o sec_firmware_asm.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_RECOVER_DATA_SECTION) += spl_data.o endif
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c index 631d9efa5e1..e6be6359c5d 100644 --- a/arch/arm/cpu/armv8/cache_v8.c +++ b/arch/arm/cpu/armv8/cache_v8.c @@ -1016,7 +1016,7 @@ void mmu_change_region_attr(phys_addr_t addr, size_t siz, u64 attrs) * running however really wants to have dcache and the MMU active. Check that * everything is sane and give the developer a hint if it isn't. */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #error Please describe your MMU layout in CONFIG_SYS_MEM_MAP and enable dcache. #endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index eefdf12369c..e2033dc5aff 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -5,7 +5,7 @@ obj-y += cpu.o obj-y += lowlevel.o obj-y += soc.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_MP) += mp.o spintable.o obj-$(CONFIG_OF_LIBFDT) += fdt.o endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index d2dbfdd08a0..f9c2083677a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -122,7 +122,7 @@ static struct mm_region early_map[] = { { CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_SIZE1, #if defined(CONFIG_TFABOOT) || \ - (defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD)) PTE_BLOCK_MEMTYPE(MT_NORMAL) | #else /* Start with nGnRnE and PXN and UXN to prevent speculative access */ PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN | @@ -181,7 +181,7 @@ static struct mm_region early_map[] = { { CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_SIZE1, #if defined(CONFIG_TFABOOT) || \ - (defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD)) PTE_BLOCK_MEMTYPE(MT_NORMAL) | #else /* Start with nGnRnE and PXN and UXN to prevent speculative access */ PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN | @@ -1055,7 +1055,7 @@ int cpu_eth_init(struct bd_info *bis) { int error = 0;
-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) error = fsl_mc_ldpaa_init(bis); #endif return error; @@ -1285,7 +1285,7 @@ phys_size_t board_reserve_ram_top(phys_size_t ram_size) { phys_size_t ram_top = ram_size;
-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) ram_top = mc_get_dram_block_size(); if (ram_top > ram_size) return ram_size + ram_top; @@ -1381,7 +1381,7 @@ static int tfa_dram_init_banksize(void) if (i > 0) ret = 0;
-#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_XPL_BUILD) /* Assign memory for MC */ #ifdef CONFIG_SYS_DDR_BLOCK3_BASE if (gd->bd->bi_dram[2].size >= @@ -1467,7 +1467,7 @@ int dram_init_banksize(void) } #endif /* CFG_SYS_MEM_RESERVE_SECURE */
-#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_XPL_BUILD) /* Assign memory for MC */ #ifdef CONFIG_SYS_DDR_BLOCK3_BASE if (gd->bd->bi_dram[2].size >= @@ -1624,7 +1624,7 @@ __weak int dram_init(void) #ifdef CONFIG_SYS_FSL_DDR fsl_initdram(); #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \ - defined(CONFIG_SPL_BUILD) + defined(CONFIG_XPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); #endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c index 9a24d4b3031..1f03f5e2ecd 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c @@ -93,7 +93,7 @@ void get_sys_info(struct sys_info *sys_info)
#define HWA_CGA_M1_CLK_SEL 0xe0000000 #define HWA_CGA_M1_CLK_SHIFT 29 -#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_XPL_BUILD) rcw_tmp = in_be32(&gur->rcwsr[7]); switch ((rcw_tmp & HWA_CGA_M1_CLK_SEL) >> HWA_CGA_M1_CLK_SHIFT) { case 2: diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index b768790437f..b5213c780fb 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -25,7 +25,7 @@ static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT]; static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT]; #endif
-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) #if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) int xfi_dpmac[XFI14 + 1]; int sgmii_dpmac[SGMII18 + 1]; @@ -162,7 +162,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask, debug("Unknown SerDes lane protocol %d\n", lane_prtcl); else { serdes_prtcl_map[lane_prtcl] = 1; -#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) #if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) if (lane_prtcl >= XFI1 && lane_prtcl <= XFI14) wriop_init_dpmac(sd, xfi_dpmac[lane_prtcl], @@ -553,7 +553,7 @@ int setup_serdes_volt(u32 svdd)
void fsl_serdes_init(void) { -#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) int i , j;
#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/icid.c b/arch/arm/cpu/armv8/fsl-layerscape/icid.c index 04ffefafbf7..aa0af077d2f 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/icid.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/icid.c @@ -23,7 +23,7 @@ static void set_icid(struct icid_id_table *tbl, int size) out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg); }
-#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_XPL_BUILD) static void set_fman_icids(struct fman_icid_id_table *tbl, int size) { int i; @@ -41,12 +41,12 @@ void set_icids(void) /* setup general icid offsets */ set_icid(icid_tbl, icid_tbl_sz);
-#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_XPL_BUILD) set_fman_icids(fman_icid_tbl, fman_icid_tbl_sz); #endif }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids) { int i, ret; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S index 4358c6ed11c..75c204e8309 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S @@ -183,7 +183,7 @@ ENTRY(lowlevel_init) #endif
/* Initialize GIC Secure Bank Status */ -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) #if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) branch_if_slave x0, 1f bl get_gic_offset @@ -306,7 +306,7 @@ ENTRY(lowlevel_init) #endif
#if !defined(CONFIG_TFABOOT) && \ - (defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_XPL_BUILD)) bl fsl_ocram_init #endif
@@ -314,7 +314,7 @@ ENTRY(lowlevel_init) ret ENDPROC(lowlevel_init)
-#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_XPL_BUILD) ENTRY(fsl_ocram_init) mov x28, lr /* Save LR */ bl fsl_clear_ocram diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c index ec80e42055d..48b95627bae 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c @@ -60,7 +60,7 @@ struct icid_id_table icid_tbl[] = {
int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
-#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_XPL_BUILD) struct fman_icid_id_table fman_icid_tbl[] = { /* port id, icid */ SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END), diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c index a73dd316f8d..ab175b60c6c 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c @@ -59,7 +59,7 @@ struct icid_id_table icid_tbl[] = {
int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
-#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_XPL_BUILD) struct fman_icid_id_table fman_icid_tbl[] = { /* port id, icid */ SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END), diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index a739ff2da58..1f1e3d4a97b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -41,7 +41,7 @@ u32 spl_boot_device(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
void spl_board_init(void) { @@ -136,4 +136,4 @@ int spl_start_uboot(void) return 1; } #endif /* CONFIG_SPL_OS_BOOT */ -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index 74612802617..4a3b9f60e46 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -58,7 +58,7 @@ reset: .globl save_boot_params_ret save_boot_params_ret:
-#if CONFIG_POSITION_INDEPENDENT && !defined(CONFIG_SPL_BUILD) +#if CONFIG_POSITION_INDEPENDENT && !defined(CONFIG_XPL_BUILD) /* Verify that we're 4K aligned. */ adr x0, _start ands x0, x0, #0xfff @@ -104,7 +104,7 @@ pie_skip_reloc: pie_fixup_done: #endif
-#if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_XPL_BUILD) .macro set_vbar, regname, reg msr \regname, \reg .endm @@ -174,7 +174,7 @@ pie_fixup_done: /* Processor specific initialization */ bl lowlevel_init
-#if defined(CONFIG_ARMV8_SPIN_TABLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_ARMV8_SPIN_TABLE) && !defined(CONFIG_XPL_BUILD) branch_if_master x0, master_cpu b spin_table_secondary_jump /* never return */ @@ -354,7 +354,7 @@ ENDPROC(smp_kick_all_cpus) /*-----------------------------------------------------------------------*/
ENTRY(c_runtime_cpu_setup) -#if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_XPL_BUILD) /* Relocate vBAR */ adr x0, vectors switch_el x1, 3f, 2f, 1f diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi index d316e869516..af229501a4d 100644 --- a/arch/arm/dts/imx8qm-u-boot.dtsi +++ b/arch/arm/dts/imx8qm-u-boot.dtsi @@ -10,7 +10,7 @@ };
&binman { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD u-boot-spl-ddr { align = <4>; align-size = <4>; diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi index 7622c40906f..62791c34c77 100644 --- a/arch/arm/dts/imx8qxp-u-boot.dtsi +++ b/arch/arm/dts/imx8qxp-u-boot.dtsi @@ -10,7 +10,7 @@ };
&binman { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD u-boot-spl-ddr { align = <4>; align-size = <4>; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h index d5f63f4a7ed..22671d4bbfd 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h @@ -12,13 +12,13 @@ #include <asm/armv8/sec_firmware.h>
struct icid_id_table { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD const char *compat; phys_addr_t compat_addr; #endif phys_addr_t reg_addr; u32 reg; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD u32 id; #endif bool le; @@ -35,7 +35,7 @@ int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids); void set_icids(void); void fdt_fixup_icid(void *blob);
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SET_ICID_ENTRY(name, idA, regA, addr, compataddr, _le) \ { .reg = regA, \ .reg_addr = addr, \ diff --git a/arch/arm/include/asm/arch-imx8/boot0.h b/arch/arm/include/asm/arch-imx8/boot0.h index 5ce781adb75..fc580b20a46 100644 --- a/arch/arm/include/asm/arch-imx8/boot0.h +++ b/arch/arm/include/asm/arch-imx8/boot0.h @@ -3,7 +3,7 @@ * Copyright 2019 NXP */
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) /* * We use absolute address not PC relative address to jump. * When running SPL on iMX8, the A core starts at address 0, a alias to OCRAM 0x100000, diff --git a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h index 4675dc3c533..b499d975526 100644 --- a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h +++ b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h @@ -16,7 +16,7 @@ void lpc32xx_slc_nand_init(void); void lpc32xx_i2c_init(unsigned int devnum); void lpc32xx_ssp_init(void); void lpc32xx_usb_init(void); -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) void ddr_init(const struct emc_dram_settings *dram); #endif #endif /* _LPC32XX_SYS_PROTO_H */ diff --git a/arch/arm/include/asm/arch-mx6/litesom.h b/arch/arm/include/asm/arch-mx6/litesom.h index 37a16d2c309..642ed22bffc 100644 --- a/arch/arm/include/asm/arch-mx6/litesom.h +++ b/arch/arm/include/asm/arch-mx6/litesom.h @@ -8,7 +8,7 @@
int litesom_mmc_init(struct bd_info *bis);
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void litesom_init_f(void); #endif
diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h index dbc97b25df8..ad9c1ac906a 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -5,7 +5,7 @@ #ifndef __ASM_ARCH_MX6_DDR_H__ #define __ASM_ARCH_MX6_DDR_H__
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #ifdef CONFIG_MX6Q #include "mx6q-ddr.h" #else @@ -488,7 +488,7 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *, const struct mx6_mmdc_calibration *, const void *);
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#define MX6_MMDC_P0_MDCTL 0x021b0000 #define MX6_MMDC_P0_MDPDC 0x021b0004 diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h index 17afd1b29e4..f8a56495acd 100644 --- a/arch/arm/include/asm/arch-mxs/sys_proto.h +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h @@ -14,7 +14,7 @@ int mxsmmc_initialize(struct bd_info *bis, int id, int (*wp)(int), int (*cd)(int));
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
#if defined(CONFIG_MX23) #include <asm/arch/iomux-mx23.h> diff --git a/arch/arm/include/asm/arch-rk3066/boot0.h b/arch/arm/include/asm/arch-rk3066/boot0.h index 6bf3828c84e..eaf81554f5b 100644 --- a/arch/arm/include/asm/arch-rk3066/boot0.h +++ b/arch/arm/include/asm/arch-rk3066/boot0.h @@ -10,7 +10,7 @@ * (containing the magic 'RK30'). This magic constant will be written into * the final image by the rkimage tool, but we need to reserve space for it here. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD b 1f /* if overwritten, entry-address is at the next word */ 1: #endif @@ -68,7 +68,7 @@ back_to_bootrom: pop {r1-r12, pc} #endif
-#if (defined(CONFIG_SPL_BUILD)) +#if (defined(CONFIG_XPL_BUILD)) /* U-Boot proper of armv7 does not need this */ b reset #endif diff --git a/arch/arm/include/asm/arch-rockchip/boot0.h b/arch/arm/include/asm/arch-rockchip/boot0.h index 0c375e543a5..edb2a31c348 100644 --- a/arch/arm/include/asm/arch-rockchip/boot0.h +++ b/arch/arm/include/asm/arch-rockchip/boot0.h @@ -12,7 +12,7 @@ * To make life easier for everyone, we build the SPL binary with * space for this 4-byte header already included in the binary. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * We need to add 4 bytes of space for the 'RK33' at the * beginning of the executable. However, as we want to keep @@ -39,7 +39,7 @@ entry_counter: .word 0 #endif
-#if (defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARM64)) +#if (defined(CONFIG_XPL_BUILD) || defined(CONFIG_ARM64)) /* U-Boot proper of armv7 do not need this */ b reset #endif @@ -54,7 +54,7 @@ _start: ARM_VECTORS #endif
-#if !defined(CONFIG_TPL_BUILD) && defined(CONFIG_SPL_BUILD) && \ +#if !defined(CONFIG_TPL_BUILD) && defined(CONFIG_XPL_BUILD) && \ (CONFIG_ROCKCHIP_SPL_RESERVE_IRAM > 0) .space CONFIG_ROCKCHIP_SPL_RESERVE_IRAM /* space for the ATF data */ #endif diff --git a/arch/arm/include/asm/arch-rockchip/cru_rv1126.h b/arch/arm/include/asm/arch-rockchip/cru_rv1126.h index 49a1f763795..ae273de3144 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rv1126.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rv1126.h @@ -11,7 +11,7 @@ #define KHz 1000 #define OSC_HZ (24 * MHz)
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) #define APLL_HZ (1008 * MHz) #else #define APLL_HZ (816 * MHz) @@ -20,7 +20,7 @@ #define CPLL_HZ (500 * MHz) #define HPLL_HZ (1400 * MHz) #define PCLK_PDPMU_HZ (100 * MHz) -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) #define ACLK_PDBUS_HZ (396 * MHz) #else #define ACLK_PDBUS_HZ (500 * MHz) @@ -32,7 +32,7 @@ #define HCLK_PDCORE_HZ (200 * MHz) #define HCLK_PDAUDIO_HZ (150 * MHz) #define CLK_OSC0_DIV_HZ (32768) -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) #define ACLK_PDVI_HZ (297 * MHz) #define CLK_ISP_HZ (297 * MHz) #define ACLK_PDISPP_HZ (297 * MHz) @@ -324,7 +324,7 @@ enum { DCLK_VOP_DIV_SHIFT = 0, DCLK_VOP_DIV_MASK = 0xff,
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) /* CRU_CLK_SEL49_CON */ ACLK_PDVI_SEL_SHIFT = 6, ACLK_PDVI_SEL_MASK = 0x3 << ACLK_PDVI_SEL_SHIFT, @@ -397,7 +397,7 @@ enum { CLK_GMAC_SRC_DIV_SHIFT = 0, CLK_GMAC_SRC_DIV_MASK = 0x1f << CLK_GMAC_SRC_DIV_SHIFT,
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) /* CRU_CLK_SEL68_CON */ ACLK_PDISPP_SEL_SHIFT = 6, ACLK_PDISPP_SEL_MASK = 0x3 << ACLK_PDISPP_SEL_SHIFT, diff --git a/arch/arm/include/asm/arch-sunxi/boot0.h b/arch/arm/include/asm/arch-sunxi/boot0.h index cad25c50bc6..6b2bb5a4586 100644 --- a/arch/arm/include/asm/arch-sunxi/boot0.h +++ b/arch/arm/include/asm/arch-sunxi/boot0.h @@ -5,7 +5,7 @@
#include <asm/arch/cpu.h>
-#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER) && !defined(CONFIG_XPL_BUILD) /* reserve space for BOOT0 header information */ b reset .space 1532 @@ -49,7 +49,7 @@ .word CONFIG_SUNXI_RVBAR_ADDRESS // writable RVBAR mapping addr .word SUNXI_SRAMC_BASE .word CONFIG_SUNXI_RVBAR_ALTERNATIVE // address for die variant -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .word CONFIG_SPL_TEXT_BASE #else .word CONFIG_TEXT_BASE diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h index 064602292b6..92c7721a530 100644 --- a/arch/arm/include/asm/arch-sunxi/sys_proto.h +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h @@ -23,7 +23,7 @@ void sdelay(unsigned long); void return_to_fel(uint32_t lr, uint32_t sp);
/* Board / SoC level designware gmac init */ -#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUN7I_GMAC +#if !defined CONFIG_XPL_BUILD && defined CONFIG_SUN7I_GMAC void eth_init_board(void); #else static inline void eth_init_board(void) {} diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index 15627c96e90..382a6d420a2 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -8,8 +8,8 @@ #define __FSL_SECURE_BOOT_H
#ifdef CONFIG_CHAIN_OF_TRUST -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
-#endif /* #ifndef CONFIG_SPL_BUILD */ +#endif /* #ifndef CONFIG_XPL_BUILD */ #endif /* #ifdef CONFIG_CHAIN_OF_TRUST */ #endif diff --git a/arch/arm/include/asm/ti-common/sys_proto.h b/arch/arm/include/asm/ti-common/sys_proto.h index a96a8382fb6..514086a1bc4 100644 --- a/arch/arm/include/asm/ti-common/sys_proto.h +++ b/arch/arm/include/asm/ti-common/sys_proto.h @@ -57,7 +57,7 @@ static inline u8 uboot_loaded_by_spl(void) */ static inline u32 omap_hw_init_context(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD return OMAP_INIT_CONTEXT_SPL; #else if (uboot_loaded_by_spl()) diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 67275fba616..e343e81cf32 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -21,7 +21,7 @@ else obj-y += setjmp.o endif
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifdef CONFIG_ARM64 obj-y += relocate_64.o else diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index a0311438b45..3e4906e273d 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -102,7 +102,7 @@ ENTRY(_main)
#if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_NEEDS_SEPARATE_STACK) ldr r0, =(CONFIG_TPL_STACK) -#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#elif defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK) ldr r0, =(CONFIG_SPL_STACK) #else ldr r0, =(SYS_INIT_SP_ADDR) @@ -119,14 +119,14 @@ ENTRY(_main) bl debug_uart_init #endif
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_EARLY_BSS) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_EARLY_BSS) CLEAR_BSS #endif
mov r0, #0 bl board_init_f
-#if ! defined(CONFIG_SPL_BUILD) +#if ! defined(CONFIG_XPL_BUILD)
/* * Set up intermediate environment (new sp and gd) and call @@ -171,13 +171,13 @@ here:
bl c_runtime_cpu_setup /* we still call old routine here */ #endif -#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK) +#if !defined(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK)
-#if !defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_EARLY_BSS) +#if !defined(CONFIG_XPL_BUILD) || !defined(CONFIG_SPL_EARLY_BSS) CLEAR_BSS #endif
-# ifdef CONFIG_SPL_BUILD +# ifdef CONFIG_XPL_BUILD /* Use a DRAM stack for the rest of SPL, if requested */ bl spl_relocate_stack_gd cmp r0, #0 @@ -185,7 +185,7 @@ here: movne r9, r0 # endif
-#if ! defined(CONFIG_SPL_BUILD) +#if ! defined(CONFIG_XPL_BUILD) bl coloured_LED_init bl red_led_on #endif diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S index dcc924dd2f4..32401f544a7 100644 --- a/arch/arm/lib/crt0_64.S +++ b/arch/arm/lib/crt0_64.S @@ -71,7 +71,7 @@ ENTRY(_main) */ #if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_NEEDS_SEPARATE_STACK) ldr x0, =(CONFIG_TPL_STACK) -#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#elif defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK) ldr x0, =(CONFIG_SPL_STACK) #elif defined(CONFIG_INIT_SP_RELATIVE) #if CONFIG_POSITION_INDEPENDENT @@ -99,7 +99,7 @@ ENTRY(_main) mov x0, #0 bl board_init_f
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /* * Set up intermediate environment (new sp and gd) and call * relocate_code(addr_moni). Trick here is that we'll return @@ -139,9 +139,9 @@ relocation_return: * Set up final (full) environment */ bl c_runtime_cpu_setup /* still call old routine */ -#endif /* !CONFIG_SPL_BUILD */ -#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK) -#if defined(CONFIG_SPL_BUILD) +#endif /* !CONFIG_XPL_BUILD */ +#if !defined(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK) +#if defined(CONFIG_XPL_BUILD) bl spl_relocate_stack_gd /* may return NULL */ /* set up gd here, outside any C code, if new stack is returned */ cmp x0, #0 diff --git a/arch/arm/lib/eabi_compat.c b/arch/arm/lib/eabi_compat.c index 0a96ba1355f..602efe04c04 100644 --- a/arch/arm/lib/eabi_compat.c +++ b/arch/arm/lib/eabi_compat.c @@ -12,7 +12,7 @@ int raise (int signum) { /* Even if printf() is available, it's large. Punt it for SPL builds */ -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) printf("raise: Signal # %d caught\n", signum); #endif return 0; diff --git a/arch/arm/lib/stack.c b/arch/arm/lib/stack.c index 2b21ec0734e..78507b76894 100644 --- a/arch/arm/lib/stack.c +++ b/arch/arm/lib/stack.c @@ -17,7 +17,7 @@ DECLARE_GLOBAL_DATA_PTR;
int arch_reserve_stacks(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD gd->start_addr_sp -= 128; /* leave 32 words for abort-stack */ gd->irq_sp = gd->start_addr_sp; #else diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S index b6b879339df..cf3f6c3e65c 100644 --- a/arch/arm/lib/vectors.S +++ b/arch/arm/lib/vectors.S @@ -133,7 +133,7 @@ _fiq: .word fiq
/* SPL interrupt handling: just hang */
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
#if !CONFIG_IS_ENABLED(SYS_NO_VECTOR_TABLE) .align 5 @@ -166,7 +166,7 @@ fiq: b 1b /* hang and never return */ #endif
-#else /* !CONFIG_SPL_BUILD */ +#else /* !CONFIG_XPL_BUILD */
/* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN @@ -332,4 +332,4 @@ fiq: bad_save_user_regs bl do_fiq
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/arch/arm/lib/zimage.c b/arch/arm/lib/zimage.c index 51287251b3f..7e1cd4dd8bc 100644 --- a/arch/arm/lib/zimage.c +++ b/arch/arm/lib/zimage.c @@ -24,14 +24,14 @@ int bootz_setup(ulong image, ulong *start, ulong *end)
if (zi->zi_magic != LINUX_ARM_ZIMAGE_MAGIC && zi->zi_magic != BAREBOX_IMAGE_MAGIC) { - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) puts("zimage: Bad magic!\n"); return 1; }
*start = zi->zi_start; *end = zi->zi_end; - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) printf("Kernel image @ %#08lx [ %#08lx - %#08lx ]\n", image, *start, *end);
diff --git a/arch/arm/mach-aspeed/ast2600/Makefile b/arch/arm/mach-aspeed/ast2600/Makefile index 448d3201aff..18f9f75e8ef 100644 --- a/arch/arm/mach-aspeed/ast2600/Makefile +++ b/arch/arm/mach-aspeed/ast2600/Makefile @@ -1,2 +1,2 @@ obj-y += lowlevel_init.o board_common.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/arch/arm/mach-aspeed/ast2600/lowlevel_init.S b/arch/arm/mach-aspeed/ast2600/lowlevel_init.S index 594963d039d..d1c31068685 100644 --- a/arch/arm/mach-aspeed/ast2600/lowlevel_init.S +++ b/arch/arm/mach-aspeed/ast2600/lowlevel_init.S @@ -97,7 +97,7 @@ .globl lowlevel_init
lowlevel_init: -#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD) mov pc, lr #else /* setup ARM arch timer frequency */ diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index cbd0ed68c27..447cd80642c 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+
obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o -ifneq ($(CONFIG_SPL_BUILD),) +ifneq ($(CONFIG_XPL_BUILD),) obj-$(CONFIG_AT91SAM9260) += sdram.o spl_at91.o obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o diff --git a/arch/arm/mach-at91/config.mk b/arch/arm/mach-at91/config.mk index 5426394651e..a31612b8179 100644 --- a/arch/arm/mach-at91/config.mk +++ b/arch/arm/mach-at91/config.mk @@ -3,7 +3,7 @@ PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,) endif
ifeq ($(CONFIG_CPU_V7A),y) -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD INPUTS-y += u-boot.img endif endif diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index ae171e3ee22..c994f97bab8 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -9,7 +9,7 @@ obj-y += cpu.o misc.o timer.o psc.o pinmux.o reset.o obj-$(CONFIG_DA850_LOWLEVEL) += da850_lowlevel.o obj-$(CONFIG_SOC_DA850) += da850_pinmux.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_FRAMEWORK) += spl.o obj-$(CONFIG_SOC_DA8XX) += da850_lowlevel.o endif diff --git a/arch/arm/mach-davinci/config.mk b/arch/arm/mach-davinci/config.mk index edbac8e8e21..3b972a26c0c 100644 --- a/arch/arm/mach-davinci/config.mk +++ b/arch/arm/mach-davinci/config.mk @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+ # # Copyright (C) 2012, Texas Instruments, Incorporated - https://www.ti.com/ -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.ais endif diff --git a/arch/arm/mach-davinci/misc.c b/arch/arm/mach-davinci/misc.c index 6c97e5810cd..07125eac7cd 100644 --- a/arch/arm/mach-davinci/misc.c +++ b/arch/arm/mach-davinci/misc.c @@ -21,7 +21,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index dd097cf5418..ebdc3b89d05 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_ARM64) += mmu-arm64.o
obj-$(CONFIG_EXYNOS5420) += sec_boot.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_ARCH_EXYNOS5) += clock_init_exynos5.o obj-$(CONFIG_ARCH_EXYNOS5) += dmc_common.o dmc_init_ddr3.o obj-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o diff --git a/arch/arm/mach-exynos/lowlevel_init.c b/arch/arm/mach-exynos/lowlevel_init.c index 0967ab995a9..0c50b2e2b99 100644 --- a/arch/arm/mach-exynos/lowlevel_init.c +++ b/arch/arm/mach-exynos/lowlevel_init.c @@ -221,8 +221,8 @@ int do_lowlevel_init(void) if (actions & DO_CLOCKS) { system_clock_init(); #ifdef CONFIG_DEBUG_UART -#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL)) || \ - !defined(CONFIG_SPL_BUILD) +#if (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL)) || \ + !defined(CONFIG_XPL_BUILD) exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE); debug_uart_init(); #endif diff --git a/arch/arm/mach-exynos/pinmux.c b/arch/arm/mach-exynos/pinmux.c index 07d19fd17ba..48c325190d5 100644 --- a/arch/arm/mach-exynos/pinmux.c +++ b/arch/arm/mach-exynos/pinmux.c @@ -171,7 +171,7 @@ static int exynos5420_mmc_config(int peripheral, int flags) * this same assumption. */ if ((peripheral == PERIPH_ID_SDMMC0) && (i == (start + 2))) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD gpio_request(i, "sdmmc0_vdden"); #endif gpio_set_value(i, 1); diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f8903afc92e..af62a39a671 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -10,7 +10,7 @@ obj-y = iomux-v3.o endif
ifeq ($(SOC),$(filter $(SOC),imx8m)) -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o endif obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o @@ -22,7 +22,7 @@ obj-y += cpu.o endif
ifeq ($(SOC),$(filter $(SOC),imx8m imx9)) -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-y += fdt.o endif endif @@ -38,7 +38,7 @@ endif ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs imx8m imx8 imx9 imxrt)) obj-y += misc.o obj-$(CONFIG_CMD_PRIBLOB) += priblob.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o endif ifeq ($(SOC),$(filter $(SOC),mx7)) obj-y += cpu.o @@ -46,7 +46,7 @@ obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o endif ifeq ($(SOC),$(filter $(SOC),mx7 imx8m)) -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_FSL_MFGPROT) += cmd_mfgprot.o endif endif @@ -57,7 +57,7 @@ ifeq ($(SOC),$(filter $(SOC),mx6 mx7)) obj-y += cache.o init.o obj-$(CONFIG_FEC_MXC) += mac.o obj-$(CONFIG_IMX_RDC) += rdc-sema.o -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o endif obj-$(CONFIG_$(SPL_)SATA) += sata.o @@ -73,18 +73,18 @@ obj-y += ddrmc-vf610.o obj-$(CONFIG_DDRMC_VF610_CALIBRATION) += ddrmc-vf610-calibration.o endif ifeq ($(SOC),$(filter $(SOC),imx8)) -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o endif endif -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o obj-$(CONFIG_CMD_NANDBCB) += cmd_nandbcb.o endif
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_SPL_LOAD_IMX_CONTAINER) += image-container.o endif
@@ -128,7 +128,7 @@ container.cfg: $(IMX_CONTAINER_CFG) FORCE ifeq ($(CONFIG_ARCH_IMX8), y) CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh IMAGE_TYPE := imx8image -ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) SPL_DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG); if [ -f spl/u-boot-spl.cfgout ]; then $(CNTR_DEPFILES) spl/u-boot-spl.cfgout; echo $$?; fi) endif DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi) diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index ceee31eecd7..17de9ff98ec 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -39,7 +39,7 @@ u32 get_imx_reset_cause(void) if (reset_cause == -1) { reset_cause = readl(&src_regs->srsr); /* preserve the value for U-Boot proper */ -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) writel(reset_cause, &src_regs->srsr); #endif } @@ -47,7 +47,7 @@ u32 get_imx_reset_cause(void) return reset_cause; }
-#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_XPL_BUILD) static char *get_reset_cause(void) { switch (get_imx_reset_cause()) { @@ -92,7 +92,7 @@ static char *get_reset_cause(void) } #endif
-#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_XPL_BUILD)
const char *get_imx_type(u32 imxtype) { diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c index 85d90686f68..a8107f46ae5 100644 --- a/arch/arm/mach-imx/hab.c +++ b/arch/arm/mach-imx/hab.c @@ -245,7 +245,7 @@ void *hab_rvt_authenticate_image(uint8_t cid, ptrdiff_t ivt_offset, return ret; }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD)
#define MAX_RECORD_BYTES (8*1024) /* 4 kbytes */
@@ -727,7 +727,7 @@ U_BOOT_CMD( "" );
-#endif /* !defined(CONFIG_SPL_BUILD) */ +#endif /* !defined(CONFIG_XPL_BUILD) */
/* Get CSF Header length */ static int get_hab_hdr_len(struct hab_hdr *hdr) @@ -939,7 +939,7 @@ int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size, puts("Dumping CSF Header\n"); print_buffer(ivt->csf, (void *)(uintptr_t)(ivt->csf), 4, 0x10, 0);
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) get_hab_status(); #endif
@@ -989,7 +989,7 @@ int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size, }
hab_exit_failure_print_status: -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) get_hab_status(); #endif
diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index 834aca82bcf..2ff4ff35e49 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -89,11 +89,11 @@ __weak void reset_cpu(void)
int arch_cpu_init(void) { -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RECOVER_DATA_SECTION) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RECOVER_DATA_SECTION) spl_save_restore_data(); #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct pass_over_info_t *pass_over;
if (is_soc_rev(CHIP_REV_A)) { diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c index d7fd102c955..d5745f67262 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c @@ -51,7 +51,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static struct imx_int_pll_rate_table imx8mm_fracpll_tbl[] = { PLL_1443X_RATE(1000000000U, 250, 3, 1, 0), PLL_1443X_RATE(933000000U, 311, 4, 1, 0), diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mq.c b/arch/arm/mach-imx/imx8m/clock_imx8mq.c index 43e677deae2..2f53430b4d0 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mq.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mq.c @@ -611,7 +611,7 @@ void dram_disable_bypass(void) CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5)); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void dram_pll_init(ulong pll_val) { u32 val; @@ -791,7 +791,7 @@ int clock_init(void) /* * Dump some clockes. */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_imx8m_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 46974bf0618..b0ab00fbd98 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -45,7 +45,7 @@ struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
int timer_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR; unsigned long freq = readl(&sctr->cntfid0);
@@ -255,7 +255,7 @@ int dram_init(void) return ret;
/* rom_pointer[1] contains the size of TEE occupies */ - if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) + if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) gd->ram_size = sdram_size - rom_pointer[1]; else gd->ram_size = sdram_size; @@ -284,7 +284,7 @@ int dram_init_banksize(void) }
gd->bd->bi_dram[bank].start = PHYS_SDRAM; - if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) { + if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) { phys_addr_t optee_start = (phys_addr_t)rom_pointer[0]; phys_size_t optee_size = (size_t)rom_pointer[1];
@@ -329,7 +329,7 @@ phys_size_t get_effective_memsize(void) sdram_b1_size = sdram_size; }
- if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_SPL_BUILD) && + if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) { /* We will relocate u-boot to Top of dram1. Tee position has two cases: * 1. At the top of dram1, Then return the size removed optee size. @@ -612,7 +612,7 @@ static void early_enable_caches(void) phys_size_t sdram_size; int entry, ret;
- if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return;
if (CONFIG_IS_ENABLED(SYS_ICACHE_OFF) || CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) @@ -646,7 +646,7 @@ int arch_cpu_init(void) * ROM might disable clock for SCTR, * enable the clock before timer_init. */ - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) clock_enable(CCGR_SCTR, 1); /* * Init timer at very early state, because sscg pll setting @@ -654,7 +654,7 @@ int arch_cpu_init(void) */ timer_init();
- if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { clock_init(); imx_set_wdog_powerdown(false);
@@ -1476,7 +1476,7 @@ int arch_misc_init(void) } #endif
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #if defined(CONFIG_IMX8MQ) || defined(CONFIG_IMX8MM) || defined(CONFIG_IMX8MN) bool serror_need_skip = true;
diff --git a/arch/arm/mach-imx/imx8ulp/Makefile b/arch/arm/mach-imx/imx8ulp/Makefile index 2c9938fcdf0..b478dab59d0 100644 --- a/arch/arm/mach-imx/imx8ulp/Makefile +++ b/arch/arm/mach-imx/imx8ulp/Makefile @@ -6,6 +6,6 @@ obj-y += lowlevel_init.o obj-y += soc.o clock.o iomux.o pcc.o cgc.o rdc.o
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-y += upower/ endif diff --git a/arch/arm/mach-imx/imx8ulp/clock.c b/arch/arm/mach-imx/imx8ulp/clock.c index fadf165ece2..c390f20d769 100644 --- a/arch/arm/mach-imx/imx8ulp/clock.c +++ b/arch/arm/mach-imx/imx8ulp/clock.c @@ -519,7 +519,7 @@ u32 get_lpuart_clk(void) return pcc_clock_get_rate(lpuart_pcc[index], lpuart_pcc_slots[index]); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Dump some core clockes. */ diff --git a/arch/arm/mach-imx/imx8ulp/lowlevel_init.S b/arch/arm/mach-imx/imx8ulp/lowlevel_init.S index 791c26407c9..9ede695dbba 100644 --- a/arch/arm/mach-imx/imx8ulp/lowlevel_init.S +++ b/arch/arm/mach-imx/imx8ulp/lowlevel_init.S @@ -16,7 +16,7 @@ rom_pointer:
.global save_boot_params save_boot_params: -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* The firmware provided ATAG/FDT address can be found in r2/x0 */ adr x0, rom_pointer stp x1, x2, [x0], #16 diff --git a/arch/arm/mach-imx/imx8ulp/soc.c b/arch/arm/mach-imx/imx8ulp/soc.c index c3722c60836..b5dc45296d1 100644 --- a/arch/arm/mach-imx/imx8ulp/soc.c +++ b/arch/arm/mach-imx/imx8ulp/soc.c @@ -104,7 +104,7 @@ enum bt_mode get_boot_mode(void)
bool m33_image_booted(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { u32 gp6 = 0;
/* DGO_GP6 */ @@ -124,7 +124,7 @@ bool m33_image_booted(void)
bool rdc_enabled_in_boot(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { u32 val = 0; int ret; bool rdc_en = true; /* Default assume DBD_EN is set */ @@ -146,7 +146,7 @@ bool rdc_enabled_in_boot(void)
static void spl_pass_boot_info(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { bool m33_booted = m33_image_booted(); bool rdc_en = rdc_enabled_in_boot(); u32 val = 0; @@ -164,7 +164,7 @@ static void spl_pass_boot_info(void) bool is_m33_handshake_necessary(void) { /* Only need handshake in u-boot */ - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) return (m33_image_booted() || rdc_enabled_in_boot()); else return false; @@ -716,7 +716,7 @@ void set_lpav_qos(void)
int arch_cpu_init(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { /* Enable System Reset Interrupt using WDOG_AD */ setbits_le32(CMC1_BASE_ADDR + 0x8C, BIT(13)); /* Clear AD_PERIPH Power switch domain out of reset interrupt flag */ @@ -805,7 +805,7 @@ int imx8ulp_dm_post_init(void) } EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_F, imx8ulp_dm_post_init);
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { debug("image entry point: 0x%lx\n", spl_image->entry_point); diff --git a/arch/arm/mach-imx/imx9/Makefile b/arch/arm/mach-imx/imx9/Makefile index e1b09ab5341..45a9105a75a 100644 --- a/arch/arm/mach-imx/imx9/Makefile +++ b/arch/arm/mach-imx/imx9/Makefile @@ -5,6 +5,6 @@ obj-y += lowlevel_init.o obj-y += soc.o clock.o clock_root.o trdc.o
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD obj-y += imx_bootaux.o #endif diff --git a/arch/arm/mach-imx/imx9/clock.c b/arch/arm/mach-imx/imx9/clock.c index 12685f970de..dda57ed7f55 100644 --- a/arch/arm/mach-imx/imx9/clock.c +++ b/arch/arm/mach-imx/imx9/clock.c @@ -640,7 +640,7 @@ void enable_usboh3_clk(unsigned char enable) } }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void dram_pll_init(ulong pll_val) { configure_fracpll(DRAM_PLL_CLK, pll_val); @@ -950,7 +950,7 @@ int set_clk_enet(enum enet_freq type) /* * Dump some clockes. */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int do_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) { u32 freq; diff --git a/arch/arm/mach-imx/imx9/lowlevel_init.S b/arch/arm/mach-imx/imx9/lowlevel_init.S index 1dc1dbfcddc..97d85911041 100644 --- a/arch/arm/mach-imx/imx9/lowlevel_init.S +++ b/arch/arm/mach-imx/imx9/lowlevel_init.S @@ -16,7 +16,7 @@ rom_pointer:
.global save_boot_params save_boot_params: -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* The firmware provided ATAG/FDT address can be found in r2/x0 */ adr x0, rom_pointer stp x1, x2, [x0], #16 diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c index 04b21207a28..7c28fa39e14 100644 --- a/arch/arm/mach-imx/imx9/soc.c +++ b/arch/arm/mach-imx/imx9/soc.c @@ -383,7 +383,7 @@ int dram_init(void) return ret;
/* rom_pointer[1] contains the size of TEE occupies */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) + if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) gd->ram_size = sdram_size - rom_pointer[1]; else gd->ram_size = sdram_size; @@ -412,7 +412,7 @@ int dram_init_banksize(void) }
gd->bd->bi_dram[bank].start = PHYS_SDRAM; - if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) { phys_addr_t optee_start = (phys_addr_t)rom_pointer[0]; phys_size_t optee_size = (size_t)rom_pointer[1];
@@ -457,7 +457,7 @@ phys_size_t get_effective_memsize(void) else sdram_b1_size = sdram_size;
- if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) { /* We will relocate u-boot to top of dram1. TEE position has two cases: * 1. At the top of dram1, Then return the size removed optee size. * 2. In the middle of dram1, return the size of dram1. @@ -629,7 +629,7 @@ static int low_drive_freq_update(void *blob) }
#ifdef CONFIG_OF_BOARD_FIXUP -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int board_fix_fdt(void *fdt) { /* Update dtb clocks for low drive mode */ @@ -701,7 +701,7 @@ static void save_reset_cause(void)
int arch_cpu_init(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { /* Disable wdog */ init_wdog();
@@ -745,7 +745,7 @@ EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_R, imx9_probe_mu);
int timer_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR; unsigned long freq = readl(&sctr->cntfid0);
diff --git a/arch/arm/mach-imx/mx5/clock.c b/arch/arm/mach-imx/mx5/clock.c index 0b8a10fd729..41116e2c6a2 100644 --- a/arch/arm/mach-imx/mx5/clock.c +++ b/arch/arm/mach-imx/mx5/clock.c @@ -940,7 +940,7 @@ void mxc_set_sata_internal_clock(void) } #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Dump some core clockes. */ diff --git a/arch/arm/mach-imx/mx6/Makefile b/arch/arm/mach-imx/mx6/Makefile index 7ea8f91e4f0..da461b0be9b 100644 --- a/arch/arm/mach-imx/mx6/Makefile +++ b/arch/arm/mach-imx/mx6/Makefile @@ -7,7 +7,7 @@
obj-y := soc.o clock.o obj-$(CONFIG_IMX_MODULE_FUSE) += module_fuse.o -obj-$(CONFIG_SPL_BUILD) += ddr.o +obj-$(CONFIG_XPL_BUILD) += ddr.o obj-$(CONFIG_MP) += mp.o obj-$(CONFIG_MX6UL_LITESOM) += litesom.o obj-$(CONFIG_MX6UL_OPOS6UL) += opos6ul.o diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c index fb9f56d2e63..b5aa606b8d0 100644 --- a/arch/arm/mach-imx/mx6/clock.c +++ b/arch/arm/mach-imx/mx6/clock.c @@ -1367,7 +1367,7 @@ void disable_ipu_clock(void) } #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Dump some core clockes. */ diff --git a/arch/arm/mach-imx/mx6/litesom.c b/arch/arm/mach-imx/mx6/litesom.c index 03e1214c060..c6bf933df94 100644 --- a/arch/arm/mach-imx/mx6/litesom.c +++ b/arch/arm/mach-imx/mx6/litesom.c @@ -78,7 +78,7 @@ int litesom_mmc_init(struct bd_info *bis) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <linux/libfdt.h> #include <spl.h> #include <asm/arch/mx6-ddr.h> diff --git a/arch/arm/mach-imx/mx6/opos6ul.c b/arch/arm/mach-imx/mx6/opos6ul.c index 340e6147b63..6a79dcb5bd1 100644 --- a/arch/arm/mach-imx/mx6/opos6ul.c +++ b/arch/arm/mach-imx/mx6/opos6ul.c @@ -79,7 +79,7 @@ int dram_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <asm/arch/mx6-ddr.h> #include <linux/libfdt.h> #include <spl.h> @@ -210,4 +210,4 @@ void board_init_f(ulong dummy) /* DDR initialization */ spl_dram_init(); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c index 2c0c77e1a56..9b40fe9235a 100644 --- a/arch/arm/mach-imx/mx6/soc.c +++ b/arch/arm/mach-imx/mx6/soc.c @@ -37,7 +37,7 @@ struct scu_regs { u32 fpga_rev; };
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX_THERMAL) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_IMX_THERMAL) static const struct imx_thermal_plat imx6_thermal_plat = { .regs = (void *)ANATOP_BASE_ADDR, .fuse_bank = 1, @@ -565,7 +565,7 @@ int board_postclk_init(void) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * cfg_val will be used for * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] @@ -600,7 +600,7 @@ const struct boot_mode soc_boot_modes[] = {
void reset_misc(void) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if defined(CONFIG_VIDEO_MXS) && !defined(CONFIG_VIDEO) lcdif_power_down(); #endif diff --git a/arch/arm/mach-imx/mx7/clock.c b/arch/arm/mach-imx/mx7/clock.c index a8606fa9b24..a8328a0b224 100644 --- a/arch/arm/mach-imx/mx7/clock.c +++ b/arch/arm/mach-imx/mx7/clock.c @@ -1100,7 +1100,7 @@ void epdc_clock_disable(void) } #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Dump some core clockes. */ diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c index 16c77cbf7be..1b891a2db3d 100644 --- a/arch/arm/mach-imx/mx7/soc.c +++ b/arch/arm/mach-imx/mx7/soc.c @@ -432,7 +432,7 @@ void s_init(void) return; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD const struct boot_mode soc_boot_modes[] = { {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, {"primary", MAKE_CFGVAL_PRIMARY_BOOT}, @@ -450,7 +450,7 @@ int boot_mode_getprisec(void)
void reset_misc(void) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if defined(CONFIG_VIDEO_MXS) && !defined(CONFIG_VIDEO) lcdif_power_down(); #endif diff --git a/arch/arm/mach-imx/mx7ulp/clock.c b/arch/arm/mach-imx/mx7ulp/clock.c index fb19c62a520..eca92955a17 100644 --- a/arch/arm/mach-imx/mx7ulp/clock.c +++ b/arch/arm/mach-imx/mx7ulp/clock.c @@ -327,7 +327,7 @@ void hab_caam_clock_enable(unsigned char enable) } #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Dump some core clockes. */ diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index 198ae2d919c..980e0226156 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -171,7 +171,7 @@ static bool ldo_mode_is_enabled(void) return false; }
-#if !defined(CONFIG_SPL) || (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD)) +#if !defined(CONFIG_SPL) || (defined(CONFIG_SPL) && defined(CONFIG_XPL_BUILD)) #if defined(CONFIG_LDO_ENABLED_MODE) static void init_ldo_mode(void) { diff --git a/arch/arm/mach-imx/syscounter.c b/arch/arm/mach-imx/syscounter.c index 922f851c56b..96fe2c7c17b 100644 --- a/arch/arm/mach-imx/syscounter.c +++ b/arch/arm/mach-imx/syscounter.c @@ -59,7 +59,7 @@ static inline unsigned long long us_to_tick(unsigned long long usec) return usec; }
-#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) || IS_ENABLED(CONFIG_SPL_BUILD) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) || IS_ENABLED(CONFIG_XPL_BUILD) int timer_init(void) { struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR; diff --git a/arch/arm/mach-k3/am62ax/Makefile b/arch/arm/mach-k3/am62ax/Makefile index 1717ca343d6..e2ef88196f8 100644 --- a/arch/arm/mach-k3/am62ax/Makefile +++ b/arch/arm/mach-k3/am62ax/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com
obj-$(CONFIG_OF_SYSTEM_SETUP) += am62a7_fdt.o -obj-$(CONFIG_SPL_BUILD) += am62a7_init.o +obj-$(CONFIG_XPL_BUILD) += am62a7_init.o diff --git a/arch/arm/mach-k3/am62px/Makefile b/arch/arm/mach-k3/am62px/Makefile index eed91a033eb..3165435f265 100644 --- a/arch/arm/mach-k3/am62px/Makefile +++ b/arch/arm/mach-k3/am62px/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com
obj-$(CONFIG_OF_SYSTEM_SETUP) += am62p5_fdt.o -obj-$(CONFIG_SPL_BUILD) += am62p5_init.o +obj-$(CONFIG_XPL_BUILD) += am62p5_init.o diff --git a/arch/arm/mach-k3/am62x/Makefile b/arch/arm/mach-k3/am62x/Makefile index 8494cdda482..ca10b6a8d3d 100644 --- a/arch/arm/mach-k3/am62x/Makefile +++ b/arch/arm/mach-k3/am62x/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+
obj-$(CONFIG_OF_SYSTEM_SETUP) += am625_fdt.o -obj-$(CONFIG_SPL_BUILD) += am625_init.o +obj-$(CONFIG_XPL_BUILD) += am625_init.o obj-y += boot.o diff --git a/arch/arm/mach-k3/am64x/Makefile b/arch/arm/mach-k3/am64x/Makefile index d0b286276c8..053a8239999 100644 --- a/arch/arm/mach-k3/am64x/Makefile +++ b/arch/arm/mach-k3/am64x/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_SPL_BUILD) += am642_init.o +obj-$(CONFIG_XPL_BUILD) += am642_init.o obj-y += boot.o diff --git a/arch/arm/mach-k3/am65x/Makefile b/arch/arm/mach-k3/am65x/Makefile index 20d5f1d3bf1..34734f24ff7 100644 --- a/arch/arm/mach-k3/am65x/Makefile +++ b/arch/arm/mach-k3/am65x/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com
obj-$(CONFIG_OF_SYSTEM_SETUP) += am654_fdt.o -obj-$(CONFIG_SPL_BUILD) += am654_init.o +obj-$(CONFIG_XPL_BUILD) += am654_init.o diff --git a/arch/arm/mach-k3/arm64/cache.S b/arch/arm/mach-k3/arm64/cache.S index 17cfb12f108..6a507ae3af5 100644 --- a/arch/arm/mach-k3/arm64/cache.S +++ b/arch/arm/mach-k3/arm64/cache.S @@ -7,7 +7,7 @@ #include <config.h> #include <linux/linkage.h>
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) ENTRY(__asm_invalidate_l3_dcache) /* Invalidate SPL address range */ mov x0, #CONFIG_SPL_TEXT_BASE diff --git a/arch/arm/mach-k3/j721e/Makefile b/arch/arm/mach-k3/j721e/Makefile index 982b88db57d..e4b0e5a8193 100644 --- a/arch/arm/mach-k3/j721e/Makefile +++ b/arch/arm/mach-k3/j721e/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com
obj-$(CONFIG_OF_SYSTEM_SETUP) += j721e_fdt.o -obj-$(CONFIG_SPL_BUILD) += j721e_init.o +obj-$(CONFIG_XPL_BUILD) += j721e_init.o diff --git a/arch/arm/mach-k3/j721s2/Makefile b/arch/arm/mach-k3/j721s2/Makefile index ceef68297c9..051ef1b11d8 100644 --- a/arch/arm/mach-k3/j721s2/Makefile +++ b/arch/arm/mach-k3/j721s2/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com
obj-$(CONFIG_OF_SYSTEM_SETUP) += j721s2_fdt.o -obj-$(CONFIG_SPL_BUILD) += j721s2_init.o +obj-$(CONFIG_XPL_BUILD) += j721s2_init.o diff --git a/arch/arm/mach-k3/j721s2/j721s2_init.c b/arch/arm/mach-k3/j721s2/j721s2_init.c index 05453fcad41..64c34d3dbd6 100644 --- a/arch/arm/mach-k3/j721s2/j721s2_init.c +++ b/arch/arm/mach-k3/j721s2/j721s2_init.c @@ -312,7 +312,7 @@ void do_dt_magic(void) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { k3_spl_init(); diff --git a/arch/arm/mach-k3/j722s/Makefile b/arch/arm/mach-k3/j722s/Makefile index 2b1fec131ed..9b0dd8afd8b 100644 --- a/arch/arm/mach-k3/j722s/Makefile +++ b/arch/arm/mach-k3/j722s/Makefile @@ -4,4 +4,4 @@ # Jayesh Choudhary j-choudhary@ti.com
obj-$(CONFIG_OF_SYSTEM_SETUP) += j722s_fdt.o -obj-$(CONFIG_SPL_BUILD) += j722s_init.o +obj-$(CONFIG_XPL_BUILD) += j722s_init.o diff --git a/arch/arm/mach-k3/j784s4/Makefile b/arch/arm/mach-k3/j784s4/Makefile index 6d1841e3f9e..1d51bcf6e8c 100644 --- a/arch/arm/mach-k3/j784s4/Makefile +++ b/arch/arm/mach-k3/j784s4/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com
obj-$(CONFIG_OF_SYSTEM_SETUP) += j784s4_fdt.o -obj-$(CONFIG_SPL_BUILD) += j784s4_init.o +obj-$(CONFIG_XPL_BUILD) += j784s4_init.o diff --git a/arch/arm/mach-k3/r5/Makefile b/arch/arm/mach-k3/r5/Makefile index d3886caa064..f533c5e7743 100644 --- a/arch/arm/mach-k3/r5/Makefile +++ b/arch/arm/mach-k3/r5/Makefile @@ -16,6 +16,6 @@ obj-y += common.o obj-y += lowlevel_init.o obj-y += r5_mpu.o
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_K3_LOAD_SYSFW) += sysfw-loader.o endif diff --git a/arch/arm/mach-k3/security.c b/arch/arm/mach-k3/security.c index 7c46914d9dd..3468a370a45 100644 --- a/arch/arm/mach-k3/security.c +++ b/arch/arm/mach-k3/security.c @@ -126,7 +126,7 @@ void ti_secure_image_post_process(void **p_image, size_t *p_size) * via YMODEM. This is done to avoid disturbing the YMODEM serial * protocol transactions. */ - if (!(IS_ENABLED(CONFIG_SPL_BUILD) && + if (!(IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) && spl_boot_device() == BOOT_DEVICE_UART)) printf("Authentication passed\n"); diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile index 6c7c25090a2..c864317baea 100644 --- a/arch/arm/mach-keystone/Makefile +++ b/arch/arm/mach-keystone/Makefile @@ -10,7 +10,7 @@ obj-y += psc.o obj-y += clock.o obj-y += mon.o CFLAGS_REMOVE_mon.o := $(LTO_CFLAGS) -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += cmd_clock.o obj-y += cmd_mon.o obj-y += cmd_poweroff.o diff --git a/arch/arm/mach-keystone/config.mk b/arch/arm/mach-keystone/config.mk index 8eccbdb3018..925a2deee23 100644 --- a/arch/arm/mach-keystone/config.mk +++ b/arch/arm/mach-keystone/config.mk @@ -7,7 +7,7 @@
include $(srctree)/arch/arm/mach-omap2/config_secure.mk
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifeq ($(CONFIG_TI_SECURE_DEVICE),y) INPUTS-y += u-boot_HS_MLO else @@ -25,7 +25,7 @@ OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE $(call if_changed,pad_cat)
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD MKIMAGEFLAGS_MLO = -A $(ARCH) -T gpimage -C none \ -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) -n U-Boot MLO: u-boot.bin FORCE diff --git a/arch/arm/mach-keystone/mon.c b/arch/arm/mach-keystone/mon.c index b945e19ec77..f99b9fbca2e 100644 --- a/arch/arm/mach-keystone/mon.c +++ b/arch/arm/mach-keystone/mon.c @@ -134,7 +134,7 @@ void board_fit_image_post_process(const void *fit, int node, void **p_image, * via YMODEM. This is done to avoid disturbing the YMODEM serial * protocol transactions. */ - if (!(IS_ENABLED(CONFIG_SPL_BUILD) && + if (!(IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) && spl_boot_device() == BOOT_DEVICE_UART)) printf("Authentication passed\n"); diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile index 6303570beea..f551abb4772 100644 --- a/arch/arm/mach-lpc32xx/Makefile +++ b/arch/arm/mach-lpc32xx/Makefile @@ -5,4 +5,4 @@
obj-y = cpu.o clk.o devices.o timer.o
-obj-$(CONFIG_SPL_BUILD) += dram.o lowlevel_init.o +obj-$(CONFIG_XPL_BUILD) += dram.o lowlevel_init.o diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile index 46bdab88206..3d9e4684fb4 100644 --- a/arch/arm/mach-mediatek/Makefile +++ b/arch/arm/mach-mediatek/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0
obj-y += cpu.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o
obj-$(CONFIG_MT8512) += mt8512/ obj-$(CONFIG_TARGET_MT7622) += mt7622/ diff --git a/arch/arm/mach-mediatek/mt7629/lowlevel_init.S b/arch/arm/mach-mediatek/mt7629/lowlevel_init.S index 0a0672cbea7..9f19003e43b 100644 --- a/arch/arm/mach-mediatek/mt7629/lowlevel_init.S +++ b/arch/arm/mach-mediatek/mt7629/lowlevel_init.S @@ -16,7 +16,7 @@
ENTRY(lowlevel_init)
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* Return to U-Boot via saved link register */ mov pc, lr #else diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 329c2e49153..35fd2d0a1d2 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -22,7 +22,7 @@ else # CONFIG_ARCH_KIRKWOOD obj-y = cpu.o obj-y += dram.o obj-y += lowlevel.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o @@ -110,11 +110,11 @@ $(obj)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ include/config/auto.conf $(call cmd,kwbcfg)
-endif # CONFIG_SPL_BUILD +endif # CONFIG_XPL_BUILD obj-y += gpio.o obj-y += mbus.o -obj-$(CONFIG_SPL_BUILD) += spl.o -obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += lowlevel_spl.o
obj-$(CONFIG_ARMADA_38X) += serdes/a38x/ obj-$(CONFIG_ARMADA_XP) += serdes/axp/ diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 8a145a5f742..da44727cf4f 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -52,7 +52,7 @@ void lowlevel_init(void) */ }
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET) +#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET) void reset_cpu(void) { struct mvebu_system_registers *reg = @@ -549,7 +549,7 @@ static void ahci_mvebu_mbus_config(void __iomem *base) int i;
/* mbus is not initialized in SPL; keep the ROM settings */ - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return;
dram = mvebu_mbus_dram_info(); diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h index af6ce2920e6..37a00501214 100644 --- a/arch/arm/mach-mvebu/include/mach/cpu.h +++ b/arch/arm/mach-mvebu/include/mach/cpu.h @@ -66,7 +66,7 @@ enum cpu_attrib { /* * Default Device Address MAP BAR values */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #ifdef CONFIG_ARMADA_38X #define MBUS_PCI_MEM_BASE 0x88000000 #define MBUS_PCI_MEM_SIZE ((3 * 128) << 20) @@ -81,19 +81,19 @@ enum cpu_attrib { #define MBUS_PCI_IO_BASE 0xF1100000 #define MBUS_PCI_IO_SIZE ((MBUS_PCI_MAX_PORTS * 64) << 10) #endif -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define MBUS_SPI_BASE 0xD4000000 #define MBUS_SPI_SIZE (64 << 20) #else #define MBUS_SPI_BASE 0xF4000000 #define MBUS_SPI_SIZE (8 << 20) #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define MBUS_DFX_BASE 0xF6000000 #define MBUS_DFX_SIZE (1 << 20) #endif #define MBUS_BOOTROM_BASE 0xF8000000 -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define MBUS_BOOTROM_SIZE (128 << 20) #else #define MBUS_BOOTROM_SIZE (8 << 20) diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index dc68d406f99..495530d8452 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -36,7 +36,7 @@ /* SOC specific definations */ #define INTREG_BASE 0xd0000000 #define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080) -#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARMADA_3700) +#if defined(CONFIG_XPL_BUILD) || defined(CONFIG_ARMADA_3700) /* * The SPL U-Boot version still runs with the default * address for the internal registers, configured by diff --git a/arch/arm/mach-mvebu/serdes/a38x/Makefile b/arch/arm/mach-mvebu/serdes/a38x/Makefile index 5a70b375966..c33e272217d 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/Makefile +++ b/arch/arm/mach-mvebu/serdes/a38x/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec.o -obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec-38x.o -obj-$(CONFIG_SPL_BUILD) += seq_exec.o -obj-$(CONFIG_SPL_BUILD) += sys_env_lib.o +obj-$(CONFIG_XPL_BUILD) += high_speed_env_spec.o +obj-$(CONFIG_XPL_BUILD) += high_speed_env_spec-38x.o +obj-$(CONFIG_XPL_BUILD) += seq_exec.o +obj-$(CONFIG_XPL_BUILD) += sys_env_lib.o diff --git a/arch/arm/mach-mvebu/serdes/axp/Makefile b/arch/arm/mach-mvebu/serdes/axp/Makefile index 897afb703ad..7d48f8da9ed 100644 --- a/arch/arm/mach-mvebu/serdes/axp/Makefile +++ b/arch/arm/mach-mvebu/serdes/axp/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_SPL_BUILD) = high_speed_env_lib.o -obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec.o +obj-$(CONFIG_XPL_BUILD) = high_speed_env_lib.o +obj-$(CONFIG_XPL_BUILD) += high_speed_env_spec.o diff --git a/arch/arm/mach-nexell/include/mach/display.h b/arch/arm/mach-nexell/include/mach/display.h index b0ee9126057..3a4e2c47f5e 100644 --- a/arch/arm/mach-nexell/include/mach/display.h +++ b/arch/arm/mach-nexell/include/mach/display.h @@ -265,7 +265,7 @@ int dp_plane_set_enable(int module, int layer, int on); int dp_plane_set_address(int module, int layer, unsigned int address); int dp_plane_wait_vsync(int module, int layer, int fps);
-#if defined CONFIG_SPL_BUILD || \ +#if defined CONFIG_XPL_BUILD || \ (!defined(CONFIG_DM) && !defined(CONFIG_OF_CONTROL)) int nx_display_probe(struct nx_display_plat *plat); #endif diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index d683c64566a..9a85c764a55 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -11,7 +11,7 @@ obj-y += reset.o ifeq ($(CONFIG_TIMER),) obj-y += timer.o else -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += timer.o endif endif diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index abdc1e40335..e720fb6b21f 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -209,7 +209,7 @@ int cpu_mmc_init(struct bd_info *bis)
/* AM33XX has two MUSB controllers which can be host or gadget */ #if (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \ - defined(CONFIG_SPL_BUILD) + defined(CONFIG_XPL_BUILD)
static struct musb_hdrc_config musb_config = { .multipoint = 1, @@ -282,7 +282,7 @@ int arch_misc_init(void) #if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)) + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)) static void rtc32k_unlock(struct davinci_rtc *rtc) { /* @@ -295,7 +295,7 @@ static void rtc32k_unlock(struct davinci_rtc *rtc) } #endif
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) /* * Write contents of the RTC_SCRATCH1 register based on board type * Two things are passed @@ -331,7 +331,7 @@ int board_early_init_f(void) { set_mux_conf_regs(); prcm_init(); -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) update_rtc_magic(); #endif return 0; @@ -379,7 +379,7 @@ static void watchdog_disable(void) ; }
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) /* * Check if we are executing rtc-only + DDR mode, and resume from it if needed */ @@ -455,7 +455,7 @@ am43xx_wait:
void s_init(void) { -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) rtc_only(); #endif } @@ -474,7 +474,7 @@ void early_system_init(void) set_uart_mux_conf(); setup_early_clocks(); uart_soft_reset(); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * Save the boot parameters passed from romcode. * We cannot delay the saving further than this, @@ -483,7 +483,7 @@ void early_system_init(void) save_omap_boot_params(); #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD spl_early_init(); #endif
@@ -497,7 +497,7 @@ void early_system_init(void) #endif }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { hw_data_init(); diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c index 649bc07047a..ddd7eeaf052 100644 --- a/arch/arm/mach-omap2/boot-common.c +++ b/arch/arm/mach-omap2/boot-common.c @@ -173,7 +173,7 @@ void save_omap_boot_params(void) #endif }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD u32 spl_boot_device(void) { return gd->arch.omap_boot_device; @@ -208,7 +208,7 @@ void spl_boot_ipu(void) int ret, size; u32 loadaddr = IPU1_LOAD_ADDR;
- if (!IS_ENABLED(CONFIG_SPL_BUILD) || + if (!IS_ENABLED(CONFIG_XPL_BUILD) || !IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU)) return;
@@ -286,7 +286,7 @@ void spl_soc_init(void) #if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) hw_watchdog_init(); #endif - if (IS_ENABLED(CONFIG_SPL_BUILD) && + if (IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU)) spl_boot_ipu(); } diff --git a/arch/arm/mach-omap2/clocks-common.c b/arch/arm/mach-omap2/clocks-common.c index 18d099145c5..f05b16797ec 100644 --- a/arch/arm/mach-omap2/clocks-common.c +++ b/arch/arm/mach-omap2/clocks-common.c @@ -24,7 +24,7 @@ #include <asm/omap_gpio.h> #include <asm/emif.h>
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * printing to console doesn't work unless * this code is executed from SPL diff --git a/arch/arm/mach-omap2/config.mk b/arch/arm/mach-omap2/config.mk index 30d8fb1b1d9..02b26733ee6 100644 --- a/arch/arm/mach-omap2/config.mk +++ b/arch/arm/mach-omap2/config.mk @@ -5,7 +5,7 @@
include $(srctree)/arch/arm/mach-omap2/config_secure.mk
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifeq ($(CONFIG_TI_SECURE_DEVICE),y) # Refer to README.ti-secure for more info # On DRA7xx/AM57xx: # diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk index 40db1aec142..62ac27dfa90 100644 --- a/arch/arm/mach-omap2/config_secure.mk +++ b/arch/arm/mach-omap2/config_secure.mk @@ -4,7 +4,7 @@ quiet_cmd_mkomapsecimg = SECURE $@ ifneq ($(TI_SECURE_DEV_PKG),) ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh),) -ifneq ($(CONFIG_SPL_BUILD),) +ifneq ($(CONFIG_XPL_BUILD),) cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \ $(patsubst u-boot-spl_HS_%,%,$(@F)) $< $@ $(CONFIG_SPL_TEXT_BASE) \ $(if $(KBUILD_VERBOSE:1=), >/dev/null) diff --git a/arch/arm/mach-omap2/hwinit-common.c b/arch/arm/mach-omap2/hwinit-common.c index bb67e50fd56..b1e486a99d9 100644 --- a/arch/arm/mach-omap2/hwinit-common.c +++ b/arch/arm/mach-omap2/hwinit-common.c @@ -113,7 +113,7 @@ static void omap_rev_string(void) puts("\n"); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_display_print(void) { omap_rev_string(); @@ -175,7 +175,7 @@ void __weak init_package_revision(void) */ int early_system_init(void) { -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT) int ret; int rescan; #endif @@ -183,19 +183,19 @@ int early_system_init(void) hw_data_init(); init_package_revision();
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (warm_reset()) force_emif_self_refresh(); #endif watchdog_init(); set_mux_conf_regs(); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD srcomp_enable(); do_io_settings(); #endif setup_early_clocks();
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * Save the boot parameters passed from romcode. * We cannot delay the saving further than this, @@ -206,7 +206,7 @@ int early_system_init(void) #endif do_board_detect();
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT) /* * Board detection has been done. * Let us see if another dtb wouldn't be a better match @@ -228,7 +228,7 @@ int early_system_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { early_system_init(); diff --git a/arch/arm/mach-omap2/omap3/Makefile b/arch/arm/mach-omap2/omap3/Makefile index 151bdf6ebc9..159633e7f6d 100644 --- a/arch/arm/mach-omap2/omap3/Makefile +++ b/arch/arm/mach-omap2/omap3/Makefile @@ -15,7 +15,7 @@ obj-y += clock.o obj-y += sys_info.o obj-y += prcm-regs.o obj-y += hw_data.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_OMAP3_ID_NAND) += spl_id_nand.o endif
diff --git a/arch/arm/mach-omap2/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c index 1de343ff48e..4b6ce6940a9 100644 --- a/arch/arm/mach-omap2/omap3/board.c +++ b/arch/arm/mach-omap2/omap3/board.c @@ -211,7 +211,7 @@ void s_init(void) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { early_system_init(); @@ -280,7 +280,7 @@ void abort(void) { }
-#if defined(CONFIG_NAND_OMAP_GPMC) & !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NAND_OMAP_GPMC) & !defined(CONFIG_XPL_BUILD) /****************************************************************************** * OMAP3 specific command to switch between NAND HW and SW ecc *****************************************************************************/ @@ -331,7 +331,7 @@ U_BOOT_CMD( "nandecc sw - Switch to NAND software ecc algorithm." );
-#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */ +#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_XPL_BUILD */
#ifdef CONFIG_DISPLAY_BOARDINFO /** diff --git a/arch/arm/mach-omap2/omap3/sdrc.c b/arch/arm/mach-omap2/omap3/sdrc.c index 404333689f6..24fae484369 100644 --- a/arch/arm/mach-omap2/omap3/sdrc.c +++ b/arch/arm/mach-omap2/omap3/sdrc.c @@ -146,7 +146,7 @@ static void do_sdrc_init(u32 cs, u32 early) * then set cs_cfg to the appropriate value then try and * setup CS1. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* set/modify board-specific timings */ get_board_mem_timings(&timings); #endif @@ -166,7 +166,7 @@ static void do_sdrc_init(u32 cs, u32 early)
writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); sdelay(0x20000); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD write_sdrc_timings(CS0, sdrc_actim_base0, &timings); make_cs1_contiguous(); write_sdrc_timings(CS1, sdrc_actim_base1, &timings); diff --git a/arch/arm/mach-omap2/omap5/hwinit.c b/arch/arm/mach-omap2/omap5/hwinit.c index 7f41e85c4a6..42f9c63fe12 100644 --- a/arch/arm/mach-omap2/omap5/hwinit.c +++ b/arch/arm/mach-omap2/omap5/hwinit.c @@ -50,7 +50,7 @@ void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size) writel(pad->val, base + pad->offset); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* LPDDR2 specific IO settings */ static void io_settings_lpddr2(void) { diff --git a/arch/arm/mach-omap2/sec-common.c b/arch/arm/mach-omap2/sec-common.c index 16bbc93f4a3..b1d11a4d1a4 100644 --- a/arch/arm/mach-omap2/sec-common.c +++ b/arch/arm/mach-omap2/sec-common.c @@ -178,7 +178,7 @@ auth_exit: * via YMODEM. This is done to avoid disturbing the YMODEM serial * protocol transactions. */ - if (!(IS_ENABLED(CONFIG_SPL_BUILD) && + if (!(IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) && spl_boot_device() == BOOT_DEVICE_UART)) printf("Authentication passed\n"); diff --git a/arch/arm/mach-orion5x/cpu.c b/arch/arm/mach-orion5x/cpu.c index 58ee67eca50..4eba69a6909 100644 --- a/arch/arm/mach-orion5x/cpu.c +++ b/arch/arm/mach-orion5x/cpu.c @@ -235,7 +235,7 @@ int arch_cpu_init(void) /* Enable and invalidate L2 cache in write through mode */ invalidate_l2_cache();
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD orion5x_config_adr_windows(); #endif
diff --git a/arch/arm/mach-orion5x/lowlevel_init.S b/arch/arm/mach-orion5x/lowlevel_init.S index aa3fcf7c301..358d2a49fbb 100644 --- a/arch/arm/mach-orion5x/lowlevel_init.S +++ b/arch/arm/mach-orion5x/lowlevel_init.S @@ -69,7 +69,7 @@
lowlevel_init:
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
/* Use 'r2 as the base for internal register accesses */ ldr r2, =ORION5X_REGS_PHY_BASE @@ -280,7 +280,7 @@ lowlevel_init: ldr r0, =0x7fff0001 str r0, [r3, #0x504]
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* Return to U-Boot via saved link register */ mov pc, lr diff --git a/arch/arm/mach-renesas/include/mach/boot0.h b/arch/arm/mach-renesas/include/mach/boot0.h index 1d8c3eea99c..fe88a2e0373 100644 --- a/arch/arm/mach-renesas/include/mach/boot0.h +++ b/arch/arm/mach-renesas/include/mach/boot0.h @@ -9,7 +9,7 @@ _start: ARM_VECTORS
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .word 0x0badc0d3; .word 0x0badc0d3; .word 0x0badc0d3; diff --git a/arch/arm/mach-renesas/lowlevel_init_ca15.S b/arch/arm/mach-renesas/lowlevel_init_ca15.S index 059cd738785..ecefa3d5c43 100644 --- a/arch/arm/mach-renesas/lowlevel_init_ca15.S +++ b/arch/arm/mach-renesas/lowlevel_init_ca15.S @@ -11,7 +11,7 @@ #include <system-constants.h>
ENTRY(lowlevel_init) -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD mrc p15, 0, r4, c0, c0, 5 /* mpidr */ orr r4, r4, r4, lsr #6 and r4, r4, #7 /* id 0-3 = ca15.0,1,2,3 */ diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 3b13891ec24..76756c3661b 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -15,7 +15,7 @@ obj-tpl-$(CONFIG_ROCKCHIP_PX30) += px30-board-tpl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),)
# Always include boot_mode.o, as we bypass it (i.e. turn it off) # inside of boot_mode.c when CONFIG_ROCKCHIP_BOOT_MODE_REG is 0. This way, @@ -51,5 +51,5 @@ obj-$(CONFIG_ROCKCHIP_RV1126) += rv1126/ obj-spl-$(CONFIG_TPL_BUILD) =
# Now add SPL/TPL objects back into the main build -obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y) +obj-$(CONFIG_XPL_BUILD) += $(obj-spl-y) obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y) diff --git a/arch/arm/mach-rockchip/px30/px30.c b/arch/arm/mach-rockchip/px30/px30.c index 8b1509e55f2..8ce9ac561f0 100644 --- a/arch/arm/mach-rockchip/px30/px30.c +++ b/arch/arm/mach-rockchip/px30/px30.c @@ -244,7 +244,7 @@ int arch_cpu_init(void) static struct px30_cru * const cru = (void *)CRU_BASE; u32 __maybe_unused val;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* We do some SoC one time setting here. */ /* Disable the ddr secure region setting to make it non-secure */ writel(0x0, DDR_FW_BASE + FW_DDR_CON); diff --git a/arch/arm/mach-rockchip/rk3036/Makefile b/arch/arm/mach-rockchip/rk3036/Makefile index 299fc50635d..038180c275c 100644 --- a/arch/arm/mach-rockchip/rk3036/Makefile +++ b/arch/arm/mach-rockchip/rk3036/Makefile @@ -6,7 +6,7 @@
obj-y += clk_rk3036.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += syscon_rk3036.o endif
diff --git a/arch/arm/mach-rockchip/rk3066/rk3066.c b/arch/arm/mach-rockchip/rk3066/rk3066.c index 70b55ca8abf..b8c177a4d0d 100644 --- a/arch/arm/mach-rockchip/rk3066/rk3066.c +++ b/arch/arm/mach-rockchip/rk3066/rk3066.c @@ -27,7 +27,7 @@ void board_debug_uart_init(void)
void spl_board_init(void) { - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) return;
if (IS_ENABLED(CONFIG_SPL_DM_MMC)) { diff --git a/arch/arm/mach-rockchip/rk3188/rk3188.c b/arch/arm/mach-rockchip/rk3188/rk3188.c index 53b2eaa2d53..7cce1112fbd 100644 --- a/arch/arm/mach-rockchip/rk3188/rk3188.c +++ b/arch/arm/mach-rockchip/rk3188/rk3188.c @@ -51,7 +51,7 @@ void board_debug_uart_init(void) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int arch_cpu_init(void) { struct rk3188_grf *grf; @@ -106,7 +106,7 @@ int rk_board_late_init(void) return rk3188_board_late_init(); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static int setup_led(void) { #ifdef CONFIG_SPL_LED diff --git a/arch/arm/mach-rockchip/rk322x/rk322x.c b/arch/arm/mach-rockchip/rk322x/rk322x.c index 712c0524266..e35ca7778e7 100644 --- a/arch/arm/mach-rockchip/rk322x/rk322x.c +++ b/arch/arm/mach-rockchip/rk322x/rk322x.c @@ -51,7 +51,7 @@ void board_debug_uart_init(void)
int arch_cpu_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SGRF_BASE 0x10150000 static struct rk322x_sgrf * const sgrf = (void *)SGRF_BASE;
diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c b/arch/arm/mach-rockchip/rk3288/rk3288.c index d1170f7e23d..62dd9da6578 100644 --- a/arch/arm/mach-rockchip/rk3288/rk3288.c +++ b/arch/arm/mach-rockchip/rk3288/rk3288.c @@ -31,7 +31,7 @@ const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_SD] = "/mmc@ff0c0000", };
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static void configure_l2ctlr(void) { u32 l2ctlr; @@ -72,7 +72,7 @@ int rk3288_qos_init(void)
int arch_cpu_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD configure_l2ctlr(); #else /* We do some SoC one time setting here. */ diff --git a/arch/arm/mach-rockchip/rk3308/rk3308.c b/arch/arm/mach-rockchip/rk3308/rk3308.c index 6f88638d156..c6b1a35f47e 100644 --- a/arch/arm/mach-rockchip/rk3308/rk3308.c +++ b/arch/arm/mach-rockchip/rk3308/rk3308.c @@ -185,7 +185,7 @@ __weak void board_debug_uart_init(void) } #endif
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) int arch_cpu_init(void) { static struct rk3308_sgrf * const sgrf = (void *)SGRF_BASE; diff --git a/arch/arm/mach-rockchip/rk3328/rk3328.c b/arch/arm/mach-rockchip/rk3328/rk3328.c index c86d11943d6..12ad17d9e8b 100644 --- a/arch/arm/mach-rockchip/rk3328/rk3328.c +++ b/arch/arm/mach-rockchip/rk3328/rk3328.c @@ -62,7 +62,7 @@ struct mm_region *mem_map = rk3328_mem_map;
int arch_cpu_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD u32 reg;
/* We do some SoC one time setting here. */ diff --git a/arch/arm/mach-rockchip/rk3368/rk3368.c b/arch/arm/mach-rockchip/rk3368/rk3368.c index f589bf67328..97b9500da25 100644 --- a/arch/arm/mach-rockchip/rk3368/rk3368.c +++ b/arch/arm/mach-rockchip/rk3368/rk3368.c @@ -93,7 +93,7 @@ int arch_early_init_r(void) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * The SPL (and also the full U-Boot stage on the RK3368) will run in * secure mode (i.e. EL3) and an ATF will eventually be booted before diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 2d7d0f82a2f..edccb2a3980 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -51,7 +51,7 @@ static struct mm_region rk3399_mem_map[] = {
struct mm_region *mem_map = rk3399_mem_map;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
#define TIMER_END_COUNT_L 0x00 #define TIMER_END_COUNT_H 0x04 @@ -83,7 +83,7 @@ void rockchip_stimer_init(void) int arch_cpu_init(void) {
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct rk3399_pmusgrf_regs *sgrf; struct rk3399_grf_regs *grf;
@@ -136,7 +136,7 @@ void board_debug_uart_init(void) struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE; struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
- if (IS_ENABLED(CONFIG_SPL_BUILD) && + if (IS_ENABLED(CONFIG_XPL_BUILD) && (IS_ENABLED(CONFIG_TARGET_CHROMEBOOK_BOB) || IS_ENABLED(CONFIG_TARGET_CHROMEBOOK_KEVIN))) { rk_setreg(&grf->io_vsel, 1 << 0); @@ -169,7 +169,7 @@ void board_debug_uart_init(void) } #endif
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) +#if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD) static void rk3399_force_power_on_reset(void) { ofnode node; diff --git a/arch/arm/mach-rockchip/rk3568/rk3568.c b/arch/arm/mach-rockchip/rk3568/rk3568.c index 1b3e40074e3..768a3739329 100644 --- a/arch/arm/mach-rockchip/rk3568/rk3568.c +++ b/arch/arm/mach-rockchip/rk3568/rk3568.c @@ -105,7 +105,7 @@ void board_debug_uart_init(void)
int arch_cpu_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * When perform idle operation, corresponding clock can * be opened or gated automatically. diff --git a/arch/arm/mach-rockchip/rk3588/rk3588.c b/arch/arm/mach-rockchip/rk3588/rk3588.c index d3162d3447e..e2dac2a5b80 100644 --- a/arch/arm/mach-rockchip/rk3588/rk3588.c +++ b/arch/arm/mach-rockchip/rk3588/rk3588.c @@ -111,7 +111,7 @@ void board_debug_uart_init(void) GPIO0B5_UART2_TX_M0 << GPIO0B5_SHIFT); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void rockchip_stimer_init(void) { /* If Timer already enabled, don't re-init it */ @@ -130,7 +130,7 @@ void rockchip_stimer_init(void) #ifndef CONFIG_TPL_BUILD int arch_cpu_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #ifdef CONFIG_ROCKCHIP_DISABLE_FORCE_JTAG static struct rk3588_sysgrf * const sys_grf = (void *)SYS_GRF_BASE; #endif diff --git a/arch/arm/mach-rockchip/rv1108/Makefile b/arch/arm/mach-rockchip/rv1108/Makefile index 9035a1a8923..283fc966e7b 100644 --- a/arch/arm/mach-rockchip/rv1108/Makefile +++ b/arch/arm/mach-rockchip/rv1108/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += syscon_rv1108.o endif obj-y += rv1108.o diff --git a/arch/arm/mach-rockchip/rv1126/rv1126.c b/arch/arm/mach-rockchip/rv1126/rv1126.c index 1c10e9b9f23..27ed5dc19e1 100644 --- a/arch/arm/mach-rockchip/rv1126/rv1126.c +++ b/arch/arm/mach-rockchip/rv1126/rv1126.c @@ -66,7 +66,7 @@ int arch_cpu_init(void) * since they are unsecure. * (Note: only secure-world can access this register) */ - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) writel(0, FIREWALL_APB_BASE + FW_DDR_CON_REG);
return 0; diff --git a/arch/arm/mach-sc5xx/Makefile b/arch/arm/mach-sc5xx/Makefile index eeb56c078b3..598a13031b4 100644 --- a/arch/arm/mach-sc5xx/Makefile +++ b/arch/arm/mach-sc5xx/Makefile @@ -15,5 +15,5 @@ obj-$(CONFIG_SC58X) += sc58x.o obj-$(CONFIG_SC59X) += sc59x.o obj-$(CONFIG_SC59X_64) += sc59x_64.o
-obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o obj-$(CONFIG_SYSCON) += rcu.o diff --git a/arch/arm/mach-sc5xx/config.mk b/arch/arm/mach-sc5xx/config.mk index 580964e559c..e7e4c9a1181 100644 --- a/arch/arm/mach-sc5xx/config.mk +++ b/arch/arm/mach-sc5xx/config.mk @@ -8,7 +8,7 @@ # Contact: Greg Malysa greg.malysa@timesys.com #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD INPUTS-y += $(obj)/u-boot-spl.ldr endif
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index 67c6a8dfec5..5fc61b4a5c6 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -80,7 +80,7 @@ obj-y += wrap_handoff_soc64.o obj-y += wrap_pll_config_soc64.o endif
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_TARGET_SOCFPGA_GEN5 obj-y += spl_gen5.o obj-y += freeze_controller.o diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c index feaf5ce4596..24a15f7903f 100644 --- a/arch/arm/mach-socfpga/board.c +++ b/arch/arm/mach-socfpga/board.c @@ -102,7 +102,7 @@ u8 socfpga_get_board_id(void) u32 jtag_usercode; int err;
-#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_ATF) +#if !IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_ATF) err = smc_get_usercode(&jtag_usercode); #else u32 resp_len = 1; @@ -130,7 +130,7 @@ u8 socfpga_get_board_id(void) return board_id; }
-#if IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_TARGET_SOCFPGA_SOC64) +#if IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_TARGET_SOCFPGA_SOC64) int board_fit_config_name_match(const char *name) { char board_name[10]; @@ -154,7 +154,7 @@ void board_fit_image_post_process(const void *fit, int node, void **p_image, } #endif
-#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_FIT) +#if !IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_FIT) void board_prep_linux(struct bootm_headers *images) { bool use_fit = false; diff --git a/arch/arm/mach-socfpga/clock_manager.c b/arch/arm/mach-socfpga/clock_manager.c index 160f6e73ca9..134eaf08e0a 100644 --- a/arch/arm/mach-socfpga/clock_manager.c +++ b/arch/arm/mach-socfpga/clock_manager.c @@ -99,7 +99,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void) } #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/arch/arm/mach-socfpga/clock_manager_arria10.c b/arch/arm/mach-socfpga/clock_manager_arria10.c index 58b9321131a..5674194f4d1 100644 --- a/arch/arm/mach-socfpga/clock_manager_arria10.c +++ b/arch/arm/mach-socfpga/clock_manager_arria10.c @@ -12,7 +12,7 @@ #include <asm/arch/clock_manager.h> #include <linux/delay.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
void sdelay(unsigned long loops); u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr, diff --git a/arch/arm/mach-socfpga/include/mach/boot0.h b/arch/arm/mach-socfpga/include/mach/boot0.h index c78def5066e..2676d6c8283 100644 --- a/arch/arm/mach-socfpga/include/mach/boot0.h +++ b/arch/arm/mach-socfpga/include/mach/boot0.h @@ -9,7 +9,7 @@ _start: ARM_VECTORS
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .balignl 64,0xf33db33f;
.word 0x1337c0d3; /* SoCFPGA preloader validation word */ diff --git a/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h b/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h index 553ebe660de..80d5047b469 100644 --- a/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h +++ b/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h @@ -62,7 +62,7 @@ #define CLKMGR_INTER CLKMGR_A10_INTER #define CLKMGR_PERPLL_EN CLKMGR_A10_PERPLL_EN
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int cm_basic_init(const void *blob); #endif
diff --git a/arch/arm/mach-socfpga/lowlevel_init_soc64.S b/arch/arm/mach-socfpga/lowlevel_init_soc64.S index 875927cc4d9..8926c2d1d9c 100644 --- a/arch/arm/mach-socfpga/lowlevel_init_soc64.S +++ b/arch/arm/mach-socfpga/lowlevel_init_soc64.S @@ -13,7 +13,7 @@ ENTRY(lowlevel_init) mov x29, lr /* Save LR */
#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) wait_for_atf: ldr x4, =CPU_RELEASE_ADDR ldr x5, [x4] diff --git a/arch/arm/mach-socfpga/mailbox_s10.c b/arch/arm/mach-socfpga/mailbox_s10.c index 4c86f1e9917..2b4f26040fe 100644 --- a/arch/arm/mach-socfpga/mailbox_s10.c +++ b/arch/arm/mach-socfpga/mailbox_s10.c @@ -400,7 +400,7 @@ error:
int mbox_reset_cold(void) { -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) psci_system_reset(); #else int ret; diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c index 495ba2a0d41..46f9c82bbb2 100644 --- a/arch/arm/mach-socfpga/misc.c +++ b/arch/arm/mach-socfpga/misc.c @@ -180,7 +180,7 @@ int arch_cpu_init(void) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_bridge(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-socfpga/misc_arria10.c index 34c21317894..c442af02888 100644 --- a/arch/arm/mach-socfpga/misc_arria10.c +++ b/arch/arm/mach-socfpga/misc_arria10.c @@ -58,7 +58,7 @@ static Altera_desc altera_fpga[] = { }, };
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) static struct pl310_regs *const pl310 = (struct pl310_regs *)CFG_SYS_PL310_BASE; static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base = diff --git a/arch/arm/mach-socfpga/misc_gen5.c b/arch/arm/mach-socfpga/misc_gen5.c index b898b6f8f22..b136691c685 100644 --- a/arch/arm/mach-socfpga/misc_gen5.c +++ b/arch/arm/mach-socfpga/misc_gen5.c @@ -213,7 +213,7 @@ int arch_early_init_r(void) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static struct socfpga_sdr_ctrl *sdr_ctrl = (struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS;
diff --git a/arch/arm/mach-socfpga/reset_manager_s10.c b/arch/arm/mach-socfpga/reset_manager_s10.c index dd0383c7c76..a634c11a028 100644 --- a/arch/arm/mach-socfpga/reset_manager_s10.c +++ b/arch/arm/mach-socfpga/reset_manager_s10.c @@ -58,7 +58,7 @@ void socfpga_per_reset_all(void)
void socfpga_bridges_reset(int enable) { -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) u64 arg = enable;
int ret = invoke_smc(INTEL_SIP_SMC_HPS_SET_BRIDGES, &arg, 1, NULL, 0); diff --git a/arch/arm/mach-socfpga/secure_vab.c b/arch/arm/mach-socfpga/secure_vab.c index 4347bf6e792..e931f1043b3 100644 --- a/arch/arm/mach-socfpga/secure_vab.c +++ b/arch/arm/mach-socfpga/secure_vab.c @@ -120,7 +120,7 @@ int socfpga_vendor_authentication(void **p_image, size_t *p_size) debug("mbox_relocate_data_addr = 0x%p\n", mbox_relocate_data_addr);
do { - if (!IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_ATF)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_ATF)) { /* Invoke SMC call to ATF to send the VAB certificate to SDM */ ret = smc_send_mailbox(MBOX_VAB_SRC_CERT, mbox_data_sz, (u32 *)mbox_relocate_data_addr, 0, &resp_len, diff --git a/arch/arm/mach-socfpga/timer_s10.c b/arch/arm/mach-socfpga/timer_s10.c index 80933586319..1a4e7c0e7e2 100644 --- a/arch/arm/mach-socfpga/timer_s10.c +++ b/arch/arm/mach-socfpga/timer_s10.c @@ -14,7 +14,7 @@ */ int timer_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int enable = 0x3; /* timer enable + output signal masked */ int loadval = ~0;
@@ -56,4 +56,4 @@ __always_inline void __udelay(unsigned long usec)
while (__get_time_stamp() < tmp + 1) /* loop till event */ ; -} \ No newline at end of file +} diff --git a/arch/arm/mach-socfpga/wrap_pll_config_soc64.c b/arch/arm/mach-socfpga/wrap_pll_config_soc64.c index f13581033e6..60ba557d390 100644 --- a/arch/arm/mach-socfpga/wrap_pll_config_soc64.c +++ b/arch/arm/mach-socfpga/wrap_pll_config_soc64.c @@ -11,7 +11,7 @@
const struct cm_config * const cm_get_default_config(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct cm_config *cm_handoff_cfg = (struct cm_config *) (SOC64_HANDOFF_CLOCK + SOC64_HANDOFF_OFFSET_DATA); u32 *conversion = (u32 *)cm_handoff_cfg; @@ -32,7 +32,7 @@ const struct cm_config * const cm_get_default_config(void)
const unsigned int cm_get_osc_clk_hz(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
u32 clock = readl(SOC64_HANDOFF_CLOCK_OSC);
@@ -50,7 +50,7 @@ const unsigned int cm_get_intosc_clk_hz(void)
const unsigned int cm_get_fpga_clk_hz(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD u32 clock = readl(SOC64_HANDOFF_CLOCK_FPGA);
writel(clock, diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile index ee8a5428feb..db7ed19bd91 100644 --- a/arch/arm/mach-stm32mp/Makefile +++ b/arch/arm/mach-stm32mp/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_STM32MP13X) += stm32mp1/ obj-$(CONFIG_STM32MP25X) += stm32mp2/
obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += cmd_stm32prog/ obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o obj-$(CONFIG_TFABOOT) += boot_params.o diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c index 9ba7a6c9a89..9cbe6a52623 100644 --- a/arch/arm/mach-stm32mp/bsec.c +++ b/arch/arm/mach-stm32mp/bsec.c @@ -409,7 +409,7 @@ static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp) u32 tmp_data = 0; int ret;
- if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_XPL_BUILD)) return stm32_smc(STM32_SMC_BSEC, STM32_SMC_READ_OTP, otp, 0, val); @@ -440,7 +440,7 @@ static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp) { struct stm32mp_bsec_plat *plat;
- if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_XPL_BUILD)) return stm32_smc(STM32_SMC_BSEC, STM32_SMC_READ_SHADOW, otp, 0, val); @@ -469,7 +469,7 @@ static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp) { struct stm32mp_bsec_plat *plat;
- if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_XPL_BUILD)) return stm32_smc_exec(STM32_SMC_BSEC, STM32_SMC_PROG_OTP, otp, val); @@ -484,7 +484,7 @@ static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp) { struct stm32mp_bsec_plat *plat;
- if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_XPL_BUILD)) return stm32_smc_exec(STM32_SMC_BSEC, STM32_SMC_WRITE_SHADOW, otp, val); @@ -504,7 +504,7 @@ static int stm32mp_bsec_write_lock(struct udevice *dev, u32 val, u32 otp) return 0; /* nothing to do */ }
- if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_XPL_BUILD)) return stm32_smc_exec(STM32_SMC_BSEC, STM32_SMC_WRLOCK_OTP, otp, 0); @@ -762,7 +762,7 @@ static int stm32mp_bsec_probe(struct udevice *dev) * update unlocked shadow for OTP cleared by the rom code * only executed in SPL, it is done in TF-A for TFABOOT */ - if (IS_ENABLED(CONFIG_SPL_BUILD) && !data->ta) { + if (IS_ENABLED(CONFIG_XPL_BUILD) && !data->ta) { plat = dev_get_plat(dev);
/* here 57 is the value for STM32MP15x ROM code, only MPU with SPL support*/ diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile b/arch/arm/mach-stm32mp/stm32mp1/Makefile index ebae50f66c9..5ae1a536ff1 100644 --- a/arch/arm/mach-stm32mp/stm32mp1/Makefile +++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile @@ -8,7 +8,7 @@ obj-y += cpu.o obj-$(CONFIG_STM32MP13X) += stm32mp13x.o obj-$(CONFIG_STM32MP15X) += stm32mp15x.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-y += tzc400.o else diff --git a/arch/arm/mach-stm32mp/stm32mp1/cpu.c b/arch/arm/mach-stm32mp/stm32mp1/cpu.c index 64480da9f8d..26c073f06a0 100644 --- a/arch/arm/mach-stm32mp/stm32mp1/cpu.c +++ b/arch/arm/mach-stm32mp/stm32mp1/cpu.c @@ -57,7 +57,7 @@ void dram_bank_mmu_setup(int bank) bool use_lmb = false; enum dcache_option option;
- if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { /* STM32_SYSRAM_BASE exist only when SPL is supported */ #ifdef CONFIG_SPL start = ALIGN_DOWN(STM32_SYSRAM_BASE, MMU_SECTION_SIZE); @@ -133,7 +133,7 @@ int mach_cpu_init(void) if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) && (boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART) gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE; - else if (IS_ENABLED(CONFIG_DEBUG_UART) && IS_ENABLED(CONFIG_SPL_BUILD)) + else if (IS_ENABLED(CONFIG_DEBUG_UART) && IS_ENABLED(CONFIG_XPL_BUILD)) debug_uart_init();
return 0; @@ -339,7 +339,7 @@ uintptr_t get_stm32mp_bl2_dtb(void) return nt_fw_dtb; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { typedef void __noreturn (*image_entry_stm32_t)(u32 romapi); diff --git a/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c index f096fe538d8..b6a0ac14101 100644 --- a/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c +++ b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c @@ -214,13 +214,13 @@ static void update_bootmode(void) /* weak function: STM32MP15x mach init for boot without TFA */ void stm32mp_cpu_init(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { security_init(); update_bootmode(); }
/* reset copro state in SPL, when used, or in U-Boot */ - if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_XPL_BUILD)) { /* Reset Coprocessor state unless it wakes up from Standby power mode */ if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) { writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE); diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 3f83c0280ef..eb6a49119a1 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -29,7 +29,7 @@ ifndef CONFIG_ARM64 obj-y += timer.o endif
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += clock.o obj-$(CONFIG_MACH_SUNIV) += dram_suniv.o obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 2b64ddc0dc7..701899ee4b2 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -74,7 +74,7 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) } #endif /* CONFIG_ARM64 */
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static int gpio_init(void) { __maybe_unused uint val; @@ -209,7 +209,7 @@ static int spl_board_load_image(struct spl_image_info *spl_image, return 0; } SPL_LOAD_IMAGE_METHOD("FEL", 0, BOOT_DEVICE_BOARD, spl_board_load_image); -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#define SUNXI_INVALID_BOOT_SOURCE -1
@@ -258,7 +258,7 @@ static int sunxi_get_boot_source(void) * proper, just return MMC0 as a placeholder, for now. */ if (IS_ENABLED(CONFIG_MACH_SUNIV) && - !IS_ENABLED(CONFIG_SPL_BUILD)) + !IS_ENABLED(CONFIG_XPL_BUILD)) return SUNXI_BOOTED_FROM_MMC0;
if (IS_ENABLED(CONFIG_MACH_SUNIV)) @@ -314,7 +314,7 @@ uint32_t sunxi_get_boot_device(void) return -1; /* Never reached */ }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD uint32_t sunxi_get_spl_size(void) { struct boot_file_head *egon_head = (void *)SPL_ADDR; @@ -478,7 +478,7 @@ void board_init_f(ulong dummy) #endif sunxi_board_init(); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#if !CONFIG_IS_ENABLED(SYSRESET) void reset_cpu(void) diff --git a/arch/arm/mach-sunxi/clock_sun4i.c b/arch/arm/mach-sunxi/clock_sun4i.c index 6458d066f7e..1367b439b83 100644 --- a/arch/arm/mach-sunxi/clock_sun4i.c +++ b/arch/arm/mach-sunxi/clock_sun4i.c @@ -13,7 +13,7 @@ #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void clock_init_safe(void) { struct sunxi_ccm_reg * const ccm = @@ -175,7 +175,7 @@ void clock_set_pll1(unsigned int hz) &ccm->cpu_ahb_apb0_cfg); sdelay(20); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* video, DRAM, PLL_PERIPH clocks */ void clock_set_pll3(unsigned int clk) diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c index cc2ee336416..b424a7893ea 100644 --- a/arch/arm/mach-sunxi/clock_sun50i_h6.c +++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c @@ -3,7 +3,7 @@ #include <asm/arch/clock.h> #include <asm/arch/prcm.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void clock_init_safe(void) { struct sunxi_ccm_reg *const ccm = @@ -131,7 +131,7 @@ int clock_twi_onoff(int port, int state)
return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* PLL_PERIPH0 clock, used by the MMC driver */ unsigned int clock_get_pll6(void) diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c index 59f7e15ffe8..657736c7ac2 100644 --- a/arch/arm/mach-sunxi/clock_sun6i.c +++ b/arch/arm/mach-sunxi/clock_sun6i.c @@ -16,7 +16,7 @@ #include <linux/bitops.h> #include <linux/delay.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void clock_init_safe(void) { struct sunxi_ccm_reg * const ccm = @@ -169,7 +169,7 @@ void clock_set_pll1(unsigned int clk) &ccm->cpu_axi_cfg); } } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* video, DRAM, PLL_PERIPH clocks */ void clock_set_pll3(unsigned int clk) diff --git a/arch/arm/mach-sunxi/clock_sun8i_a83t.c b/arch/arm/mach-sunxi/clock_sun8i_a83t.c index c00d16a918d..f593749028c 100644 --- a/arch/arm/mach-sunxi/clock_sun8i_a83t.c +++ b/arch/arm/mach-sunxi/clock_sun8i_a83t.c @@ -15,7 +15,7 @@ #include <asm/arch/sys_proto.h> #include <linux/delay.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void clock_init_safe(void) { struct sunxi_ccm_reg * const ccm = @@ -100,7 +100,7 @@ void clock_set_pll1(unsigned int clk) CPU_CLK_SRC_PLL1 << C1_CPUX_CLK_SRC_SHIFT, &ccm->cpu_axi_cfg); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* DRAM and PLL_PERIPH0 clock (used by the MMC driver) */ void clock_set_pll5(unsigned int clk) diff --git a/arch/arm/mach-sunxi/clock_sun9i.c b/arch/arm/mach-sunxi/clock_sun9i.c index abdab405445..5f99071f21b 100644 --- a/arch/arm/mach-sunxi/clock_sun9i.c +++ b/arch/arm/mach-sunxi/clock_sun9i.c @@ -14,7 +14,7 @@ #include <asm/arch/prcm.h> #include <asm/arch/sys_proto.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
static void clock_set_pll2(unsigned int clk) { @@ -188,7 +188,7 @@ int clock_twi_onoff(int port, int state)
return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* PLL_PERIPH0 clock (used by the MMC driver) */ unsigned int clock_get_pll4_periph0(void) diff --git a/arch/arm/mach-sunxi/gtbus_sun9i.c b/arch/arm/mach-sunxi/gtbus_sun9i.c index a058fea6bef..aa93defb25e 100644 --- a/arch/arm/mach-sunxi/gtbus_sun9i.c +++ b/arch/arm/mach-sunxi/gtbus_sun9i.c @@ -11,7 +11,7 @@ #include <asm/arch/gtbus_sun9i.h> #include <asm/arch/sys_proto.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
void gtbus_init(void) { diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 1d22dc3942f..a87e6a6c352 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -5,7 +5,7 @@ # (C) Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-y += cpu.o else @@ -25,7 +25,7 @@ obj-y += dt-setup.o obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o obj-$(CONFIG_TEGRA_GPU) += gpu.o obj-$(CONFIG_TEGRA_IVC) += ivc.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ARMV7_PSCI) += psci.o endif obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c index c382e042860..cc37878b8d1 100644 --- a/arch/arm/mach-tegra/board.c +++ b/arch/arm/mach-tegra/board.c @@ -47,7 +47,7 @@ enum {
static bool from_spl __section(".data");
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, unsigned long r3) { diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index 7971e3b68d5..e68b8c894bb 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -46,7 +46,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* TODO(sjg@chromium.org): Remove once SPL supports device tree */ U_BOOT_DRVINFO(tegra_gpios) = { "gpio_tegra" diff --git a/arch/arm/mach-tegra/tegra114/Makefile b/arch/arm/mach-tegra/tegra114/Makefile index 346d6cb5696..f1c1042b4e2 100644 --- a/arch/arm/mach-tegra/tegra114/Makefile +++ b/arch/arm/mach-tegra/tegra114/Makefile @@ -2,6 +2,6 @@ # # Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
-obj-$(CONFIG_SPL_BUILD) += cpu.o +obj-$(CONFIG_XPL_BUILD) += cpu.o
obj-y += clock.o diff --git a/arch/arm/mach-tegra/tegra124/Makefile b/arch/arm/mach-tegra/tegra124/Makefile index 6ea511e7b25..dee790015a3 100644 --- a/arch/arm/mach-tegra/tegra124/Makefile +++ b/arch/arm/mach-tegra/tegra124/Makefile @@ -5,13 +5,13 @@ # SPDX-License-Identifier: GPL-2.0+ #
-obj-$(CONFIG_SPL_BUILD) += cpu.o +obj-$(CONFIG_XPL_BUILD) += cpu.o
obj-y += clock.o obj-y += pmc.o obj-y += xusb-padctl.o obj-y += ../xusb-padctl-common.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ARMV7_NONSEC) += psci.o endif diff --git a/arch/arm/mach-tegra/tegra20/Makefile b/arch/arm/mach-tegra/tegra20/Makefile index c2ae98eb376..2774c866b02 100644 --- a/arch/arm/mach-tegra/tegra20/Makefile +++ b/arch/arm/mach-tegra/tegra20/Makefile @@ -2,7 +2,7 @@ # # (C) Copyright 2010,2011 Nvidia Corporation.
-obj-$(CONFIG_SPL_BUILD) += cpu.o +obj-$(CONFIG_XPL_BUILD) += cpu.o obj-$(CONFIG_$(SPL_)CMD_EBTUPDATE) += bct.o
# The AVP is ARMv4T architecture so we must use special compiler diff --git a/arch/arm/mach-tegra/tegra30/Makefile b/arch/arm/mach-tegra/tegra30/Makefile index ee0e6f5b948..5edc7c9ce7d 100644 --- a/arch/arm/mach-tegra/tegra30/Makefile +++ b/arch/arm/mach-tegra/tegra30/Makefile @@ -2,7 +2,7 @@ # # Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
-obj-$(CONFIG_SPL_BUILD) += cpu.o +obj-$(CONFIG_XPL_BUILD) += cpu.o obj-$(CONFIG_$(SPL_)CMD_EBTUPDATE) += bct.o
obj-y += clock.o diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 5172efac0c4..d1ec8195dcb 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD
obj-y += boards.o obj-y += spl_board_init.o diff --git a/arch/arm/mach-uniphier/arm32/Makefile b/arch/arm/mach-uniphier/arm32/Makefile index b41aba7e29a..c8ce67ac05a 100644 --- a/arch/arm/mach-uniphier/arm32/Makefile +++ b/arch/arm/mach-uniphier/arm32/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += lowlevel_init.o obj-$(CONFIG_DEBUG_LL) += debug_ll.o else diff --git a/arch/arm/mach-uniphier/boot-device/boot-device.c b/arch/arm/mach-uniphier/boot-device/boot-device.c index 1e6bc8433f7..9d0fe5c8583 100644 --- a/arch/arm/mach-uniphier/boot-device/boot-device.c +++ b/arch/arm/mach-uniphier/boot-device/boot-device.c @@ -214,7 +214,7 @@ int uniphier_boot_from_backend(void) return !!(readl(sg_base + SG_PINMON0) & BIT(27)); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
static int do_pinmon(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) @@ -267,4 +267,4 @@ U_BOOT_CMD( "" );
-#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile index c49e44754c0..0e47beb5f22 100644 --- a/arch/arm/mach-uniphier/clk/Makefile +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-early-ld4.o clk-dram-ld4.o dpll-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-early-ld4.o clk-dram-ld4.o dpll-pro4.o diff --git a/arch/arm/mach-uniphier/debug-uart/Makefile b/arch/arm/mach-uniphier/debug-uart/Makefile index 81e9314a50d..4202cb3503b 100644 --- a/arch/arm/mach-uniphier/debug-uart/Makefile +++ b/arch/arm/mach-uniphier/debug-uart/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_ARCH_UNIPHIER_LD4) += debug-uart-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += debug-uart-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += debug-uart-sld8.o diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart.c b/arch/arm/mach-uniphier/debug-uart/debug-uart.c index 1ba012ca45d..6836eb63bfa 100644 --- a/arch/arm/mach-uniphier/debug-uart/debug-uart.c +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart.c @@ -26,7 +26,7 @@ static void _debug_uart_putc(int c) writel(c, base + UNIPHIER_UART_TX); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void sg_set_pinsel(unsigned int pin, unsigned int muxval, unsigned int mux_bits, unsigned int reg_stride) { @@ -56,7 +56,7 @@ void sg_set_iectrl(unsigned int pin)
void _debug_uart_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); unsigned int divisor;
diff --git a/arch/arm/mach-uniphier/dram/Makefile b/arch/arm/mach-uniphier/dram/Makefile index 7d11315d07f..36188c38cf9 100644 --- a/arch/arm/mach-uniphier/dram/Makefile +++ b/arch/arm/mach-uniphier/dram/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += umc-ld4.o \ ddrphy-training.o ddrphy-ld4.o diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index d9b2b999e10..8545331c54a 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -12,4 +12,4 @@ obj-y += slcr.o obj-y += clk.o obj-y += lowlevel_init.o AFLAGS_lowlevel_init.o := -mfpu=neon -obj-$(CONFIG_SPL_BUILD) += spl.o ps7_spl_init.o +obj-$(CONFIG_XPL_BUILD) += spl.o ps7_spl_init.o diff --git a/arch/arm/mach-zynq/cpu.c b/arch/arm/mach-zynq/cpu.c index 5b6d765099d..74dddc25988 100644 --- a/arch/arm/mach-zynq/cpu.c +++ b/arch/arm/mach-zynq/cpu.c @@ -52,7 +52,7 @@ static const struct { int arch_cpu_init(void) { zynq_slcr_unlock(); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* Device config APB, unlock the PCAP */ writel(0x757BDF0D, &devcfg_base->unlock); writel(0xFFFFFFFF, &devcfg_base->rom_shadow); diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile index 38be1627eeb..7c95f32a5c3 100644 --- a/arch/arm/mach-zynqmp/Makefile +++ b/arch/arm/mach-zynqmp/Makefile @@ -5,10 +5,10 @@
obj-y += aes.o clk.o cpu.o obj-$(CONFIG_MP) += mp.o -obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o psu_spl_init.o +obj-$(CONFIG_XPL_BUILD) += spl.o handoff.o psu_spl_init.o obj-$(CONFIG_SPL_ZYNQMP_DRAM_ECC_INIT) += ecc_spl_init.o obj-$(CONFIG_$(SPL_)ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_ZYNQMP) += zynqmp.o -endif # !CONFIG_SPL_BUILD +endif # !CONFIG_XPL_BUILD diff --git a/arch/arm/mach-zynqmp/cpu.c b/arch/arm/mach-zynqmp/cpu.c index 07668c94689..24fd5751216 100644 --- a/arch/arm/mach-zynqmp/cpu.c +++ b/arch/arm/mach-zynqmp/cpu.c @@ -187,7 +187,7 @@ int zynqmp_mmio_write(const u32 address, const u32 mask, const u32 value) { - if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) return zynqmp_mmio_rawwrite(address, mask, value); #if defined(CONFIG_ZYNQMP_FIRMWARE) else @@ -205,7 +205,7 @@ int zynqmp_mmio_read(const u32 address, u32 *value) if (!value) return ret;
- if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { ret = zynqmp_mmio_rawread(address, value); } #if defined(CONFIG_ZYNQMP_FIRMWARE) diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index 64c3f313195..53244046f19 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -11,7 +11,7 @@ PLATFORM_CPPFLAGS += -fdata-sections -ffunction-sections
LDFLAGS_FINAL += --gc-sections
-ifeq ($(CONFIG_SPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD),) PLATFORM_CPPFLAGS += -fPIC LDFLAGS_u-boot += -pic endif diff --git a/arch/microblaze/cpu/Makefile b/arch/microblaze/cpu/Makefile index b8c1dcbe14f..4d4919c3e3f 100644 --- a/arch/microblaze/cpu/Makefile +++ b/arch/microblaze/cpu/Makefile @@ -7,4 +7,4 @@ extra-y = start.o obj-y = irq.o obj-y += interrupts.o cache.o exception.o cpuinfo.o relocate.o obj-$(CONFIG_XILINX_MICROBLAZE0_PVR) += pvr.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index c1e0fcda0a4..69c4efdad7f 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -26,7 +26,7 @@ _start: mts rslr, r0 mts rshr, r20
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) addi r1, r0, CONFIG_SPL_STACK #else add r1, r0, r20 @@ -83,7 +83,7 @@ uboot_sym_start: brlid r15, board_init_f_init_reserve nop
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /* Setup vectors with pre-relocation symbols */ or r5, r0, r0 brlid r15, __setup_exceptions @@ -122,7 +122,7 @@ clear_bss: brlid r15, debug_uart_init nop #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD or r5, r0, r0 /* flags - empty */ bri board_init_f #else @@ -130,7 +130,7 @@ clear_bss: #endif 1: bri 1b
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .text .ent __setup_exceptions .align 2 diff --git a/arch/mips/Makefile b/arch/mips/Makefile index a007914590f..453c7885075 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -2,7 +2,7 @@
head-y := arch/mips/cpu/start.o
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) head-$(CONFIG_ARCH_JZ47XX) := arch/mips/mach-jz47xx/start.o head-$(CONFIG_SOC_MT7621) := arch/mips/mach-mtmips/mt7621/spl/start.o endif diff --git a/arch/mips/config.mk b/arch/mips/config.mk index 745f03190e9..ad2ea11f72c 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -53,7 +53,7 @@ PLATFORM_ELFFLAGS += -B mips $(OBJCOPYFLAGS) # LDFLAGS_vmlinux += -G 0 -static -n -nostdlib # MODFLAGS += -mlong-calls # -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD OBJCOPYFLAGS += -j .data.reloc -j .dtb.init.rodata LDFLAGS_FINAL += --emit-relocs endif diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 1621cc9a1ff..79841dbe5ed 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -12,6 +12,6 @@ obj-y += traps.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_GO) += boot.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o
lib-$(CONFIG_USE_PRIVATE_LIBGCC) += ashldi3.o ashrdi3.o lshrdi3.o udivdi3.o diff --git a/arch/mips/mach-jz47xx/Makefile b/arch/mips/mach-jz47xx/Makefile index dbb8229f785..5621a09b6dd 100644 --- a/arch/mips/mach-jz47xx/Makefile +++ b/arch/mips/mach-jz47xx/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+
-extra-$(CONFIG_SPL_BUILD) := start.o +extra-$(CONFIG_XPL_BUILD) := start.o
obj-$(CONFIG_SOC_JZ4780) += jz4780/ diff --git a/arch/mips/mach-jz47xx/include/mach/jz4780.h b/arch/mips/mach-jz47xx/include/mach/jz4780.h index 880445dac39..9f9a8cf9438 100644 --- a/arch/mips/mach-jz47xx/include/mach/jz4780.h +++ b/arch/mips/mach-jz47xx/include/mach/jz4780.h @@ -94,7 +94,7 @@ void jz4780_efuse_init(u32 ahb2_rate);
void jz4780_tcu_wdt_start(void);
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int jz_mmc_init(void __iomem *base); #endif
diff --git a/arch/mips/mach-jz47xx/jz4780/jz4780.c b/arch/mips/mach-jz47xx/jz4780/jz4780.c index 1d6fb6a4e27..504fd27d285 100644 --- a/arch/mips/mach-jz47xx/jz4780/jz4780.c +++ b/arch/mips/mach-jz47xx/jz4780/jz4780.c @@ -19,7 +19,7 @@ #include <mmc.h> #include <spl.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Pointer to the global data structure for SPL */ DECLARE_GLOBAL_DATA_PTR; gd_t gdata __section(".bss"); @@ -73,7 +73,7 @@ void board_init_f(ulong dummy)
hang(); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
phys_addr_t board_get_usable_ram_top(phys_size_t total_size) { diff --git a/arch/mips/mach-jz47xx/start.S b/arch/mips/mach-jz47xx/start.S index 760d0215493..0d40e637a68 100644 --- a/arch/mips/mach-jz47xx/start.S +++ b/arch/mips/mach-jz47xx/start.S @@ -18,7 +18,7 @@ .globl _start .text _start: -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
/* magic value ("MSPL") */ .word 0x4d53504c @@ -95,4 +95,4 @@ enable_caches: .end enable_caches
#endif /* CONFIG_SOC_JZ4780 */ -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/arch/mips/mach-mtmips/Makefile b/arch/mips/mach-mtmips/Makefile index 19f1e07033e..2f35b1a925c 100644 --- a/arch/mips/mach-mtmips/Makefile +++ b/arch/mips/mach-mtmips/Makefile @@ -5,7 +5,7 @@ obj-y += cpu.o ifneq ($(CONFIG_SOC_MT7621),y) obj-y += ddr_init.o obj-y += ddr_cal.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o endif
obj-$(CONFIG_SOC_MT7620) += mt7620/ diff --git a/arch/mips/mach-mtmips/cpu.c b/arch/mips/mach-mtmips/cpu.c index 243938a0ebb..982a5889df8 100644 --- a/arch/mips/mach-mtmips/cpu.c +++ b/arch/mips/mach-mtmips/cpu.c @@ -21,7 +21,7 @@ int dram_init(void) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int last_stage_init(void) { void *src, *dst; diff --git a/arch/mips/mach-mtmips/mt7620/Makefile b/arch/mips/mach-mtmips/mt7620/Makefile index 649f6c3798f..d2d79e3424b 100644 --- a/arch/mips/mach-mtmips/mt7620/Makefile +++ b/arch/mips/mach-mtmips/mt7620/Makefile @@ -5,6 +5,6 @@ obj-y += init.o obj-y += dram.o obj-y += serial.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += sysc.o endif diff --git a/arch/mips/mach-mtmips/mt7621/Makefile b/arch/mips/mach-mtmips/mt7621/Makefile index bf1b0bb688b..f48083e3559 100644 --- a/arch/mips/mach-mtmips/mt7621/Makefile +++ b/arch/mips/mach-mtmips/mt7621/Makefile @@ -3,7 +3,7 @@ obj-y += init.o obj-y += serial.o
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) ifeq ($(CONFIG_TPL_BUILD),y) obj-y += tpl/ else diff --git a/arch/mips/mach-mtmips/mt7628/Makefile b/arch/mips/mach-mtmips/mt7628/Makefile index 7e139d5adfd..63acf54536b 100644 --- a/arch/mips/mach-mtmips/mt7628/Makefile +++ b/arch/mips/mach-mtmips/mt7628/Makefile @@ -3,4 +3,4 @@ obj-y += lowlevel_init.o obj-y += init.o obj-y += ddr.o -obj-$(CONFIG_SPL_BUILD) += serial.o +obj-$(CONFIG_XPL_BUILD) += serial.o diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index 725a4f48aad..dd0124cace1 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -27,7 +27,7 @@ PLATFORM_CPPFLAGS+= -D__PPC__ endif
# Only test once -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) archprepare: checkgcc4
# GCC 3.x is reported to have problems generating the type of relocation diff --git a/arch/powerpc/cpu/mpc83xx/Makefile b/arch/powerpc/cpu/mpc83xx/Makefile index 1255f533e34..9974239f881 100644 --- a/arch/powerpc/cpu/mpc83xx/Makefile +++ b/arch/powerpc/cpu/mpc83xx/Makefile @@ -7,7 +7,7 @@
MINIMAL=
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index ceb54867894..78762f000df 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -41,11 +41,11 @@ #endif
#if defined(CONFIG_NAND_SPL) || \ - (defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)) + (defined(CONFIG_XPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)) #define MINIMAL_SPL #endif
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NAND_SPL) && \ +#if !defined(CONFIG_XPL_BUILD) && !defined(CONFIG_NAND_SPL) && \ !defined(CONFIG_SYS_RAMBOOT) #define CFG_SYS_FLASHBOOT #endif @@ -168,7 +168,7 @@ _start: /* time t 0 */ /* Initialise the E300 processor core */ /*------------------------------------------*/
-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MPC83XX_WAIT_FOR_NAND)) || \ +#if (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_MPC83XX_WAIT_FOR_NAND)) || \ defined(CONFIG_NAND_SPL) /* The FCM begins execution after only the first page * is loaded. Wait for the rest before branching diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index f3ee7d34949..bf74228efde 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -8,7 +8,7 @@
MINIMAL=
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y @@ -26,7 +26,7 @@ else
obj-$(CONFIG_MP) += release.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_ERRATA) += cmd_errata.o endif
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 574510fa088..75bfc07fe97 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -179,7 +179,7 @@ void cpu_init_early_f(void *fdt) invalidate_tlb(1);
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && \ - !(CONFIG_IS_ENABLED(INIT_MINIMAL) && defined(CONFIG_SPL_BUILD)) && \ + !(CONFIG_IS_ENABLED(INIT_MINIMAL) && defined(CONFIG_XPL_BUILD)) && \ !defined(CONFIG_NAND_SPL) disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB); #endif diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 3e24a90233c..89bce5bed69 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -28,7 +28,7 @@ #define LAW_EN 0x80000000
#if defined(CONFIG_NAND_SPL) || \ - (defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)) + (defined(CONFIG_XPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)) #define MINIMAL_SPL #endif
@@ -58,16 +58,16 @@ END_GOT
#ifdef CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR -#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD)
/* Maximal size of the image */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define MAX_IMAGE_SIZE (CONFIG_SPL_MAX_SIZE - (CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512)) #else #define MAX_IMAGE_SIZE CONFIG_SYS_L2_SIZE #endif
-#if defined(CONFIG_SPL_BUILD) && CONFIG_SPL_MAX_SIZE < CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512 +#if defined(CONFIG_XPL_BUILD) && CONFIG_SPL_MAX_SIZE < CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512 #error "CONFIG_SPL_MAX_SIZE is too small for CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA" #endif
@@ -1138,10 +1138,10 @@ create_init_ram_area: /* * For Targets without CONFIG_SPL like P3, P5 * and for targets with CONFIG_SPL like T1, T2, T4, only for - * u-boot-spl i.e. CONFIG_SPL_BUILD + * u-boot-spl i.e. CONFIG_XPL_BUILD */ #elif defined(CONFIG_RAMBOOT_PBL) && defined(CONFIG_NXP_ESBC) && \ - (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD)) /* create a temp mapping in AS = 1 for mapping CONFIG_VAL(SYS_MONITOR_BASE) * to L3 Address configured by PBL for ISBC code */ @@ -1617,7 +1617,7 @@ relocate_code: mr r10,r5 /* Save copy of Destination Address */
GET_GOT -#if !defined(CONFIG_SPL_SKIP_RELOCATE) || !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL_SKIP_RELOCATE) || !defined(CONFIG_XPL_BUILD) mr r3,r5 /* Destination Address */ lis r4,CONFIG_VAL(SYS_MONITOR_BASE)@h /* Source Address */ ori r4,r4,CONFIG_VAL(SYS_MONITOR_BASE)@l diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 32b68a169a4..415ab1096c6 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -45,7 +45,7 @@ __weak void init_tlbs(void) }
#if !defined(CONFIG_NAND_SPL) && \ - (!defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) + (!defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, phys_addr_t *rpn) { @@ -313,7 +313,7 @@ unsigned int setup_ddr_tlbs_phys(phys_addr_t p_addr, print_size(memsize > CFG_MAX_MEM_MAPPED ? memsize - CFG_MAX_MEM_MAPPED + size : size, " of DDR memory left unmapped in U-Boot\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); #endif } diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index e3a536d4f8c..a44b5165d74 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -4,7 +4,7 @@
MINIMAL=
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c index 3a82e60a247..638c3a6fee5 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c @@ -241,7 +241,7 @@ int pamu_init(void) spaact_size = sizeof(struct paace) * NUM_SPAACT_ENTRIES;
/* Allocate space for Primary PAACT Table */ -#if (defined(CONFIG_SPL_BUILD) && defined(CFG_SPL_PPAACT_ADDR)) +#if (defined(CONFIG_XPL_BUILD) && defined(CFG_SPL_PPAACT_ADDR)) ppaact = (void *)CFG_SPL_PPAACT_ADDR; #else ppaact = memalign(PAMU_TABLE_ALIGNMENT, ppaact_size); @@ -251,7 +251,7 @@ int pamu_init(void) memset(ppaact, 0, ppaact_size);
/* Allocate space for Secondary PAACT Table */ -#if (defined(CONFIG_SPL_BUILD) && defined(CFG_SPL_SPAACT_ADDR)) +#if (defined(CONFIG_XPL_BUILD) && defined(CFG_SPL_SPAACT_ADDR)) sec = (void *)CFG_SPL_SPAACT_ADDR; #else sec = memalign(PAMU_TABLE_ALIGNMENT, spaact_size); diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c index b4695cc99cb..3fd80eb29c0 100644 --- a/arch/powerpc/cpu/mpc8xxx/law.c +++ b/arch/powerpc/cpu/mpc8xxx/law.c @@ -78,7 +78,7 @@ void disable_law(u8 idx) }
#if !defined(CONFIG_NAND_SPL) && \ - (!defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) + (!defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) static int get_law_entry(u8 i, struct law_entry *e) { u32 lawar; @@ -109,7 +109,7 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) }
#if !defined(CONFIG_NAND_SPL) && \ - (!defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) + (!defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { u32 idx; diff --git a/arch/powerpc/cpu/mpc8xxx/pamu_table.c b/arch/powerpc/cpu/mpc8xxx/pamu_table.c index 831a11736cc..bd3f69b469e 100644 --- a/arch/powerpc/cpu/mpc8xxx/pamu_table.c +++ b/arch/powerpc/cpu/mpc8xxx/pamu_table.c @@ -28,7 +28,7 @@ void construct_pamu_addr_table(struct pamu_addr_tbl *tbl, int *num_entries)
i++; #endif -#if (defined(CONFIG_SPL_BUILD) && (CFG_SYS_INIT_L3_VADDR)) +#if (defined(CONFIG_XPL_BUILD) && (CFG_SYS_INIT_L3_VADDR)) tbl->start_addr[i] = (uint64_t)virt_to_phys((void *)CFG_SYS_INIT_L3_VADDR); tbl->size[i] = 256 * 1024; /* 256K CPC flash */ diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 221f9d842a8..f12830984c6 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -36,7 +36,7 @@ #endif /* #ifdef CONFIG_NXP_ESBC */
#ifdef CONFIG_CHAIN_OF_TRUST -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * PPAACT and SPAACT table for PAMU must be placed on DDR after DDR init * due to space crunch on CPC and thus malloc will not work. @@ -45,10 +45,10 @@ #define CFG_SPL_SPAACT_ADDR 0x2f000000 #define CFG_SPL_JR0_LIODN_S 454 #define CFG_SPL_JR0_LIODN_NS 458 -#endif /* ifdef CONFIG_SPL_BUILD */ +#endif /* ifdef CONFIG_XPL_BUILD */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #include <config_fsl_chain_trust.h> -#endif /* #ifndef CONFIG_SPL_BUILD */ +#endif /* #ifndef CONFIG_XPL_BUILD */ #endif /* #ifdef CONFIG_CHAIN_OF_TRUST */ #endif diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index ecc2aba8f3c..f797f8cee66 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -9,7 +9,7 @@ lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _ashldi3.o _ashrdi3.o _lshrdi3.o
MINIMAL=
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y @@ -45,6 +45,6 @@ obj-y += time.o obj-y += traps.o endif # not minimal
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_$(SPL_TPL)_FRAMEWORK) += spl.o endif diff --git a/arch/riscv/cpu/fu540/Makefile b/arch/riscv/cpu/fu540/Makefile index 043fb961a51..69759c55658 100644 --- a/arch/riscv/cpu/fu540/Makefile +++ b/arch/riscv/cpu/fu540/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2020 SiFive, Inc # Pragnesh Patel pragnesh.patel@sifive.com
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-y += spl.o else obj-y += dram.o diff --git a/arch/riscv/cpu/fu740/Makefile b/arch/riscv/cpu/fu740/Makefile index 1d1ad98ba7c..9071c831992 100644 --- a/arch/riscv/cpu/fu740/Makefile +++ b/arch/riscv/cpu/fu740/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2020-2021 SiFive, Inc # Pragnesh Patel pragnesh.patel@sifive.com
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-y += spl.o else obj-y += dram.o diff --git a/arch/riscv/cpu/jh7110/Makefile b/arch/riscv/cpu/jh7110/Makefile index 951c95631e9..0939c1061d0 100644 --- a/arch/riscv/cpu/jh7110/Makefile +++ b/arch/riscv/cpu/jh7110/Makefile @@ -2,7 +2,7 @@ # # Copyright (C) 2022 StarFive Technology Co., Ltd.
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-y += spl.o else obj-y += cpu.o diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index 8e58f641f1b..3f78932aa9d 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -90,7 +90,7 @@ _start: * Set stackpointer in internal/ex RAM to call board_init_f */ call_board_init_f: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK) li t0, CONFIG_SPL_STACK #else li t0, SYS_INIT_SP_ADDR @@ -218,7 +218,7 @@ wait_for_gd_init: la t5, board_init_f jalr t5 /* jump to board_init_f() */
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD spl_clear_bss: la t0, __bss_start la t1, __bss_end @@ -271,7 +271,7 @@ spl_call_board_init_r: j board_init_r #endif
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /* * void relocate_code(addr_sp, gd, addr_moni) * @@ -420,7 +420,7 @@ call_board_init_r: * jump to it ... */ jr t4 /* jump to board_init_r() */ -#endif /* !defined(CONFIG_SPL_BUILD) */ +#endif /* !defined(CONFIG_XPL_BUILD) */
#if CONFIG_IS_ENABLED(SMP) hart_out_of_bounds_loop: diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index 65dc49f6fa5..3bc34cd61fb 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -24,7 +24,7 @@ obj-y += reset.o endif obj-y += setjmp.o obj-$(CONFIG_$(SPL_)SMP) += smp.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o obj-y += fdt_fixup.o obj-$(CONFIG_$(SPL)CMD_BDI) += bdinfo.o
diff --git a/arch/riscv/lib/sifive_cache.c b/arch/riscv/lib/sifive_cache.c index d8fe1dfa958..d74544b93d8 100644 --- a/arch/riscv/lib/sifive_cache.c +++ b/arch/riscv/lib/sifive_cache.c @@ -10,7 +10,7 @@ #include <dm/device-internal.h> #include <dm/uclass-internal.h>
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD void enable_caches(void) { struct udevice *dev; @@ -45,4 +45,4 @@ void enable_caches(void)
probe_cache_device(DM_DRIVER_GET(sifive_pl2), dev); } -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/arch/sandbox/cpu/Makefile b/arch/sandbox/cpu/Makefile index 7c5c52652f5..bfcdc335d32 100644 --- a/arch/sandbox/cpu/Makefile +++ b/arch/sandbox/cpu/Makefile @@ -8,7 +8,7 @@ obj-y := cache.o cpu.o state.o extra-y := start.o os.o extra-$(CONFIG_SANDBOX_SDL) += sdl.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o obj-$(CONFIG_ETH_SANDBOX_RAW) += eth-raw-os.o
# os.c is build in the system environment, so needs standard includes diff --git a/arch/sandbox/cpu/cpu.c b/arch/sandbox/cpu/cpu.c index 51ce40e7f08..06f8c13fab9 100644 --- a/arch/sandbox/cpu/cpu.c +++ b/arch/sandbox/cpu/cpu.c @@ -165,7 +165,7 @@ phys_addr_t virt_to_phys(void *ptr)
void *map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) { -#if defined(CONFIG_PCI) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_PCI) && !defined(CONFIG_XPL_BUILD) unsigned long plen = len; void *ptr;
diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c index 9ad5d46271a..ef587ef48b0 100644 --- a/arch/sandbox/cpu/start.c +++ b/arch/sandbox/cpu/start.c @@ -129,7 +129,7 @@ static int sandbox_cmdline_cb_help(struct sandbox_state *state, const char *arg) } SANDBOX_CMDLINE_OPT_SHORT(help, 'h', 0, "Display help");
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int sandbox_main_loop_init(void) { struct sandbox_state *state = state_get_current(); diff --git a/arch/x86/Makefile b/arch/x86/Makefile index f1afc74fff8..3c8c541efbc 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -10,7 +10,7 @@ else ifndef CONFIG_SPL head-y := arch/x86/cpu/start.o else -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD head-y = arch/x86/cpu/start_from_tpl.o else head-y = arch/x86/cpu/start_from_spl.o diff --git a/arch/x86/config.mk b/arch/x86/config.mk index 2e3a7119e79..6d4839dfb38 100644 --- a/arch/x86/config.mk +++ b/arch/x86/config.mk @@ -10,7 +10,7 @@ PF_CPPFLAGS_X86 := $(call cc-option, -fno-toplevel-reorder, \ PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_X86) PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD IS_32BIT := y else ifndef CONFIG_X86_64 @@ -26,7 +26,7 @@ endif ifeq ($(IS_32BIT),y) PLATFORM_CPPFLAGS += -march=i386 -m32 else -PLATFORM_CPPFLAGS += $(if $(CONFIG_SPL_BUILD),,-fpic) -fno-common -march=core2 -m64 +PLATFORM_CPPFLAGS += $(if $(CONFIG_XPL_BUILD),,-fpic) -fno-common -march=core2 -m64
ifndef CONFIG_X86_HARDFP PLATFORM_CPPFLAGS += -mno-mmx -mno-sse @@ -86,12 +86,12 @@ ifeq ($(IS_32BIT),y) PLATFORM_CPPFLAGS += -mregparm=3 endif KBUILD_LDFLAGS += --emit-relocs -LDFLAGS_FINAL += --gc-sections $(if $(CONFIG_SPL_BUILD),,-pie) +LDFLAGS_FINAL += --gc-sections $(if $(CONFIG_XPL_BUILD),,-pie)
endif
ifdef CONFIG_X86_64 -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD PLATFORM_CPPFLAGS += -D__x86_64__ else PLATFORM_CPPFLAGS += -D__I386__ diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile index 16e67e3da24..c21d6d6d438 100644 --- a/arch/x86/cpu/Makefile +++ b/arch/x86/cpu/Makefile @@ -15,7 +15,7 @@ else ifndef CONFIG_SPL extra-y = start.o else -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD extra-y = start_from_tpl.o else extra-y = start_from_spl.o diff --git a/arch/x86/cpu/apollolake/Makefile b/arch/x86/cpu/apollolake/Makefile index 2ddf4af62c5..f481f40d9bb 100644 --- a/arch/x86/cpu/apollolake/Makefile +++ b/arch/x86/cpu/apollolake/Makefile @@ -2,20 +2,20 @@ # # Copyright 2019 Google LLC
-obj-$(CONFIG_SPL_BUILD) += cpu_spl.o -obj-$(CONFIG_SPL_BUILD) += spl.o -obj-$(CONFIG_SPL_BUILD) += systemagent.o +obj-$(CONFIG_XPL_BUILD) += cpu_spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += systemagent.o obj-y += cpu_common.o
ifndef CONFIG_TPL_BUILD obj-y += cpu.o obj-y += punit.o obj-y += fsp_bindings.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += fsp_m.o endif endif -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += acpi.o obj-y += fsp_s.o endif diff --git a/arch/x86/cpu/apollolake/fsp_bindings.c b/arch/x86/cpu/apollolake/fsp_bindings.c index f6fbddce922..b4bb677f5cd 100644 --- a/arch/x86/cpu/apollolake/fsp_bindings.c +++ b/arch/x86/cpu/apollolake/fsp_bindings.c @@ -247,7 +247,7 @@ static int fsp_update_config_from_dtb(ofnode node, u8 *cfg, return 0; }
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) const struct fsp_binding fsp_m_bindings[] = { { .type = FSP_UINT32, @@ -653,7 +653,7 @@ int fsp_m_update_config_from_dtb(ofnode node, struct fsp_m_config *cfg) } #endif
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD) const struct fsp_binding fsp_s_bindings[] = { { .type = FSP_UINT8, diff --git a/arch/x86/cpu/broadwell/Makefile b/arch/x86/cpu/broadwell/Makefile index 3e1f76d6118..6c6d0edac9b 100644 --- a/arch/x86/cpu/broadwell/Makefile +++ b/arch/x86/cpu/broadwell/Makefile @@ -6,12 +6,12 @@ obj-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += cpu.o obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += cpu_full.o
ifdef CONFIG_SPL -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += cpu_from_spl.o obj-y += cpu_full.o obj-y += refcode.o endif -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD # obj-y += cpu_from_spl.o obj-y += adsp.o obj-y += sata.o diff --git a/arch/x86/cpu/broadwell/cpu_full.c b/arch/x86/cpu/broadwell/cpu_full.c index c43fb7a608b..529dab18d5d 100644 --- a/arch/x86/cpu/broadwell/cpu_full.c +++ b/arch/x86/cpu/broadwell/cpu_full.c @@ -84,7 +84,7 @@ static const u8 power_limit_time_msr_to_sec[] = { [0x11] = 128, };
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) +#if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD) int arch_cpu_init(void) { return 0; diff --git a/arch/x86/cpu/broadwell/pch.c b/arch/x86/cpu/broadwell/pch.c index 2c8b7380d96..5b6147432a7 100644 --- a/arch/x86/cpu/broadwell/pch.c +++ b/arch/x86/cpu/broadwell/pch.c @@ -606,7 +606,7 @@ static int broadwell_pch_probe(struct udevice *dev) return broadwell_pch_early_init(dev); else return broadwell_pch_init(dev); - } else if (IS_ENABLED(CONFIG_SPL) && !IS_ENABLED(CONFIG_SPL_BUILD)) { + } else if (IS_ENABLED(CONFIG_SPL) && !IS_ENABLED(CONFIG_XPL_BUILD)) { return broadwell_pch_init(dev); } else { return 0; diff --git a/arch/x86/cpu/config.mk b/arch/x86/cpu/config.mk index 87e242a2065..6acdf9b3b23 100644 --- a/arch/x86/cpu/config.mk +++ b/arch/x86/cpu/config.mk @@ -9,7 +9,7 @@ LDPPFLAGS += -DRESET_VEC_LOC=$(CONFIG_RESET_VEC_LOC) LDPPFLAGS += -DSTART_16=$(CONFIG_SYS_X86_START16)
ifdef CONFIG_X86_64 -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_EFI_APP),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_EFI_APP),) LDSCRIPT = $(srctree)/arch/x86/cpu/u-boot-64.lds endif endif diff --git a/arch/x86/cpu/coreboot/Makefile b/arch/x86/cpu/coreboot/Makefile index a6cdb9a1485..a6c7d0e56d5 100644 --- a/arch/x86/cpu/coreboot/Makefile +++ b/arch/x86/cpu/coreboot/Makefile @@ -14,7 +14,7 @@ ifndef CONFIG_SPL obj-y += car.o endif -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += coreboot_spl.o else obj-y += sdram.o diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c index d474c79e25e..c3d7442b4a8 100644 --- a/arch/x86/cpu/coreboot/coreboot.c +++ b/arch/x86/cpu/coreboot/coreboot.c @@ -82,7 +82,7 @@ static void board_final_init(void)
static int last_stage_init(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return 0;
board_final_init(); diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index ad21fdb457a..fbd23af6ce9 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -185,7 +185,7 @@ void show_boot_progress(int val) #endif
#if !defined(CONFIG_SYS_COREBOOT) && !defined(CONFIG_EFI_STUB) && \ - !defined(CONFIG_SPL_BUILD) + !defined(CONFIG_XPL_BUILD) /* * Implement a weak default function for boards that need to do some final init * before the system is ready. diff --git a/arch/x86/cpu/intel_common/Makefile b/arch/x86/cpu/intel_common/Makefile index 1dc17b45879..2e312a30353 100644 --- a/arch/x86/cpu/intel_common/Makefile +++ b/arch/x86/cpu/intel_common/Makefile @@ -11,13 +11,13 @@ obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += report_platform.o obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += mrc.o endif
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_INTEL_GMA_ACPI) += intel_opregion.o endif
ifdef CONFIG_INTEL_CAR_CQOS obj-$(CONFIG_TPL_BUILD) += car2.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += car2_uninit.o endif endif @@ -38,7 +38,7 @@ obj-$(CONFIG_HAVE_ITSS) += itss.o obj-$(CONFIG_HAVE_P2SB) += p2sb.o
ifdef CONFIG_SPL -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifndef CONFIG_SYS_COREBOOT obj-y += cpu_from_spl.o endif diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile index 716134e9ff3..1f3b0c092f1 100644 --- a/arch/x86/cpu/ivybridge/Makefile +++ b/arch/x86/cpu/ivybridge/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_$(SPL_)X86_32BIT_INIT) += cpu.o obj-y += early_me.o obj-y += lpc.o obj-y += northbridge.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += sata.o endif obj-$(CONFIG_$(SPL_)X86_32BIT_INIT) += sdram.o diff --git a/arch/x86/include/asm/string.h b/arch/x86/include/asm/string.h index 5c49b0f009b..f6836b74488 100644 --- a/arch/x86/include/asm/string.h +++ b/arch/x86/include/asm/string.h @@ -18,7 +18,7 @@ extern char *strchr(const char *s, int c); * Our assembly routines do not work on in 64-bit mode and we don't do a lot of * copying in SPL, so code size is more important there. */ -#if defined(CONFIG_SPL_BUILD) || !IS_ENABLED(CONFIG_X86_32BIT_INIT) +#if defined(CONFIG_XPL_BUILD) || !IS_ENABLED(CONFIG_X86_32BIT_INIT)
#undef __HAVE_ARCH_MEMCPY extern void *memcpy(void *, const void *, __kernel_size_t); diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 8fc35e1b51e..2738f0b577b 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -11,11 +11,11 @@ obj-y += bios_asm.o obj-y += bios_interrupts.o endif
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_X86_32BIT_INIT) += string.o endif
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_BOOTM) += bootm.o endif obj-y += cmd_boot.o @@ -47,7 +47,7 @@ obj-y += acpigen.o obj-$(CONFIG_$(SPL_TPL_)GENERATE_ACPI_TABLE) += acpi_table.o endif obj-y += tables.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ZBOOT) += zimage.o endif obj-$(CONFIG_USE_HOB) += hob.o @@ -58,7 +58,7 @@ obj-$(CONFIG_FSP_VERSION1) += fsp1/ obj-$(CONFIG_FSP_VERSION2) += fsp2/ endif
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_TPL_BUILD obj-y += tpl.o else @@ -96,7 +96,7 @@ endif
else
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifneq ($(CONFIG_CMD_BOOTEFI_SELFTEST)$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE),) extra-y += $(EFI_CRT0) $(EFI_RELOC) endif diff --git a/arch/x86/lib/fsp/Makefile b/arch/x86/lib/fsp/Makefile index da6c0a886ae..0039dd1bf5c 100644 --- a/arch/x86/lib/fsp/Makefile +++ b/arch/x86/lib/fsp/Makefile @@ -4,7 +4,7 @@
obj-y += fsp_common.o obj-y += fsp_dram.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_VIDEO_FSP) += fsp_graphics.o endif obj-y += fsp_support.o diff --git a/board/BuR/brppt1/Makefile b/board/BuR/brppt1/Makefile index 3dec0e6522a..417afacad15 100644 --- a/board/BuR/brppt1/Makefile +++ b/board/BuR/brppt1/Makefile @@ -5,7 +5,7 @@ # Copyright (C) 2013 Hannes Schmelzer oe5hpm@oevsv.at # Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-y := mux.o endif obj-y += ../common/common.o diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c index 80e0ca805b5..8b7def06cc4 100644 --- a/board/BuR/brppt1/board.c +++ b/board/BuR/brppt1/board.c @@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR; /* -- defines for GPIO -- */ #define REPSWITCH (0+20) /* GPIO0_20 */
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) /* TODO: check ram-timing ! */ static const struct ddr_data ddr3_data = { .datardsratio0 = MT41K256M16HA125E_RD_DQS, @@ -142,7 +142,7 @@ void sdram_init(void) &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* Basic board specific setup. Pinmux has been handled already. */ int board_init(void) diff --git a/board/BuR/brppt2/board.c b/board/BuR/brppt2/board.c index 105fac8912d..c0a163251b4 100644 --- a/board/BuR/brppt2/board.c +++ b/board/BuR/brppt2/board.c @@ -16,7 +16,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/iomux.h> #include <asm/arch/mx6-pins.h> -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD # include <asm/arch/mx6-ddr.h> #endif #include <asm/arch/clock.h> @@ -82,7 +82,7 @@
#define MUXDESC(pad, ctrl) IOMUX_PADS(pad | MUX_PAD_CTRL(ctrl))
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) static iomux_v3_cfg_t const eth_pads[] = { /* * Gigabit Ethernet @@ -542,4 +542,4 @@ void board_init_f(ulong dummy) void reset_cpu(void) { } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/board/BuR/brppt2/config.mk b/board/BuR/brppt2/config.mk index 0d1638a97ac..f2362d16dc4 100644 --- a/board/BuR/brppt2/config.mk +++ b/board/BuR/brppt2/config.mk @@ -23,7 +23,7 @@ cmd_prodzip = \ zip -9 -r $@ misc/* >/dev/null $<
ifeq ($(hw-platform-y),brppt2) -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) INPUTS-y += $(hw-platform-y)_prog.bin INPUTS-y += $(hw-platform-y)_prod.zip endif diff --git a/board/BuR/brsmarc1/Makefile b/board/BuR/brsmarc1/Makefile index 1c3f64dea4d..42b647af58d 100644 --- a/board/BuR/brsmarc1/Makefile +++ b/board/BuR/brsmarc1/Makefile @@ -4,7 +4,7 @@ # B&R Industrial Automation GmbH - http://www.br-automation.com/ #
-obj-$(CONFIG_SPL_BUILD) += mux.o +obj-$(CONFIG_XPL_BUILD) += mux.o obj-y += ../common/br_resetc.o obj-y += ../common/common.o obj-y += board.o diff --git a/board/BuR/brsmarc1/board.c b/board/BuR/brsmarc1/board.c index bfb6adf6d5c..c05eec6b35e 100644 --- a/board/BuR/brsmarc1/board.c +++ b/board/BuR/brsmarc1/board.c @@ -32,7 +32,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) static const struct ddr_data ddr3_data = { .datardsratio0 = MT41K256M16HA125E_RD_DQS, .datawdsratio0 = MT41K256M16HA125E_WR_DQS, @@ -124,8 +124,8 @@ void sdram_init(void) &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); } -#endif /* CONFIG_SPL_BUILD */ -#if !defined(CONFIG_SPL_BUILD) +#endif /* CONFIG_XPL_BUILD */ +#if !defined(CONFIG_XPL_BUILD)
/* decision if backlight is switched on or not on powerup */ int board_backlightstate(void) @@ -166,4 +166,4 @@ int board_late_init(void) }
#endif /* CONFIG_BOARD_LATE_INIT */ -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/board/BuR/brxre1/Makefile b/board/BuR/brxre1/Makefile index 1d224e9e719..c4b1a67be3e 100644 --- a/board/BuR/brxre1/Makefile +++ b/board/BuR/brxre1/Makefile @@ -5,7 +5,7 @@ # Copyright (C) 2014 Hannes Schmelzer oe5hpm@oevsv.at - # Bernecker & Rainer Industrielektronik GmbH - http://www.br-automation.com/
-obj-$(CONFIG_SPL_BUILD) += mux.o +obj-$(CONFIG_XPL_BUILD) += mux.o obj-y += ../common/br_resetc.o obj-y += ../common/common.o obj-y += board.o diff --git a/board/BuR/brxre1/board.c b/board/BuR/brxre1/board.c index 510d2af3147..c25af42e70a 100644 --- a/board/BuR/brxre1/board.c +++ b/board/BuR/brxre1/board.c @@ -39,7 +39,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) static const struct ddr_data ddr3_data = { .datardsratio0 = MT41K256M16HA125E_RD_DQS, .datawdsratio0 = MT41K256M16HA125E_WR_DQS, @@ -134,7 +134,7 @@ void sdram_init(void) &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ /* * Basic board specific setup. Pinmux has been handled already. */ diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c index 8aff821cfe8..7fb61736710 100644 --- a/board/BuR/common/common.c +++ b/board/BuR/common/common.c @@ -83,7 +83,7 @@ int overwrite_console(void) return 1; }
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_AM33XX) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_AM33XX) #include <asm/arch/hardware.h> #include <asm/arch/omap.h> #include <asm/arch/clock.h> @@ -175,4 +175,4 @@ void set_mux_conf_regs(void) enable_board_pin_mux(); }
-#endif /* CONFIG_SPL_BUILD && CONFIG_AM33XX */ +#endif /* CONFIG_XPL_BUILD && CONFIG_AM33XX */ diff --git a/board/CZ.NIC/turris_1x/Makefile b/board/CZ.NIC/turris_1x/Makefile index a24aee9161b..1bf370122d9 100644 --- a/board/CZ.NIC/turris_1x/Makefile +++ b/board/CZ.NIC/turris_1x/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ # (C) 2022 Pali Rohár pali@kernel.org
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += ../../freescale/p1_p2_rdb_pc/spl.o endif
diff --git a/board/CZ.NIC/turris_1x/tlb.c b/board/CZ.NIC/turris_1x/tlb.c index f35a5558385..5e5892ee1e5 100644 --- a/board/CZ.NIC/turris_1x/tlb.c +++ b/board/CZ.NIC/turris_1x/tlb.c @@ -111,7 +111,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 9, BOOKE_PAGESZ_256K, 1), #endif
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD) /* **M** - SDRAM 2G */ SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, diff --git a/board/CZ.NIC/turris_omnia/Makefile b/board/CZ.NIC/turris_omnia/Makefile index d1ef5cb8600..acaa3b8ef31 100644 --- a/board/CZ.NIC/turris_omnia/Makefile +++ b/board/CZ.NIC/turris_omnia/Makefile @@ -4,4 +4,4 @@
obj-y := turris_omnia.o ../turris_atsha_otp.o ../turris_common.o obj-$(CONFIG_CMD_EEPROM_LAYOUT) += eeprom.o -obj-$(CONFIG_SPL_BUILD) += old_ddr3_training.o +obj-$(CONFIG_XPL_BUILD) += old_ddr3_training.o diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c index eb88ee7f1ed..b7588fa4eec 100644 --- a/board/CZ.NIC/turris_omnia/turris_omnia.c +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c @@ -494,7 +494,7 @@ static bool omnia_read_eeprom(struct omnia_eeprom *oep) if (!eeprom) return false;
- if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) ret = dm_i2c_read(eeprom, 0, (void *)oep, sizeof(*oep)); else ret = i2c_eeprom_read(eeprom, 0, (void *)oep, sizeof(*oep)); diff --git a/board/Synology/ds414/Makefile b/board/Synology/ds414/Makefile index b1d018effaa..1a10e9d8d54 100644 --- a/board/Synology/ds414/Makefile +++ b/board/Synology/ds414/Makefile @@ -3,6 +3,6 @@ # Copyright (C) 2015 Phil Sutter phil@nwl.cc
obj-y += ds414.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += cmd_syno.o endif diff --git a/board/advantech/imx8mp_rsb3720a1/Makefile b/board/advantech/imx8mp_rsb3720a1/Makefile index eb6b18b04a2..39fb0d4fb62 100644 --- a/board/advantech/imx8mp_rsb3720a1/Makefile +++ b/board/advantech/imx8mp_rsb3720a1/Makefile @@ -8,7 +8,7 @@ ifdef CONFIG_TARGET_IMX8MP_RSB3720A1_6G obj-y += imx8mp_rsb3720a1.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing_rsb3720a1_6G.o endif @@ -17,7 +17,7 @@ endif ifdef CONFIG_TARGET_IMX8MP_RSB3720A1_4G obj-y += imx8mp_rsb3720a1.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing_rsb3720a1_4G.o endif diff --git a/board/advantech/imx8qm_dmsse20_a1/Makefile b/board/advantech/imx8qm_dmsse20_a1/Makefile index 262ffcd6834..c82fcc85636 100644 --- a/board/advantech/imx8qm_dmsse20_a1/Makefile +++ b/board/advantech/imx8qm_dmsse20_a1/Makefile @@ -5,4 +5,4 @@ #
obj-y += imx8qm_dmsse20_a1.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/board/advantech/imx8qm_rom7720_a1/Makefile b/board/advantech/imx8qm_rom7720_a1/Makefile index 51c5de251c4..d8792c6c687 100644 --- a/board/advantech/imx8qm_rom7720_a1/Makefile +++ b/board/advantech/imx8qm_rom7720_a1/Makefile @@ -6,6 +6,6 @@
obj-y += imx8qm_rom7720_a1.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o endif diff --git a/board/alliedtelesis/x530/Makefile b/board/alliedtelesis/x530/Makefile index 97de1d463fe..467c55d7e66 100644 --- a/board/alliedtelesis/x530/Makefile +++ b/board/alliedtelesis/x530/Makefile @@ -4,6 +4,6 @@ #
obj-y := $(BOARD).o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += ../common/gpio_hog.o endif diff --git a/board/asus/grouper/Makefile b/board/asus/grouper/Makefile index d041cf80870..05c6ffb405b 100644 --- a/board/asus/grouper/Makefile +++ b/board/asus/grouper/Makefile @@ -6,7 +6,7 @@ # (C) Copyright 2021 # Svyatoslav Ryhel clamor95@gmail.com
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_DM_PMIC_MAX77663) += grouper-spl-max.o obj-$(CONFIG_DM_PMIC_TPS65910) += grouper-spl-ti.o endif diff --git a/board/asus/transformer-t30/Makefile b/board/asus/transformer-t30/Makefile index c083f2289ba..ad700786b70 100644 --- a/board/asus/transformer-t30/Makefile +++ b/board/asus/transformer-t30/Makefile @@ -6,6 +6,6 @@ # (C) Copyright 2021 # Svyatoslav Ryhel clamor95@gmail.com
-obj-$(CONFIG_SPL_BUILD) += transformer-t30-spl.o +obj-$(CONFIG_XPL_BUILD) += transformer-t30-spl.o
obj-y += transformer-t30.o diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index af486e977e5..d94904366ed 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -70,7 +70,7 @@ void at91sam9m10g45ek_nand_hw_init(void) } #endif
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #include <spl.h> #include <nand.h>
diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c index 6f9abcbb127..2cddc2175ac 100644 --- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c +++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c @@ -119,7 +119,7 @@ int dram_init(void) return 0; }
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #include <spl.h> #include <nand.h>
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index f52b9a97731..3f41fb1c983 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -134,7 +134,7 @@ int dram_init(void) return 0; }
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #include <spl.h> #include <nand.h>
diff --git a/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c b/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c index cb3cd7ac9ae..bf54fc33df4 100644 --- a/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c +++ b/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c @@ -105,7 +105,7 @@ int misc_init_r(void) #endif
/* SPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_board_init(void) { } diff --git a/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c b/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c index 15cbd0daa6f..04de1257eca 100644 --- a/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c +++ b/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c @@ -90,7 +90,7 @@ int dram_init(void) }
/* SPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
static void board_leds_init(void) { diff --git a/board/atmel/sama5d2_icp/sama5d2_icp.c b/board/atmel/sama5d2_icp/sama5d2_icp.c index 6f0d578abf7..113bd2feb62 100644 --- a/board/atmel/sama5d2_icp/sama5d2_icp.c +++ b/board/atmel/sama5d2_icp/sama5d2_icp.c @@ -79,7 +79,7 @@ int misc_init_r(void) }
/* SPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
/* must set PB25 low to enable the CAN transceivers */ static void board_can_stdby_dis(void) diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c index d104736fa7c..eca5b2bf107 100644 --- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c +++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c @@ -105,7 +105,7 @@ int misc_init_r(void) #endif
/* SPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_board_init(void) { } diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c index f98322fb540..7a813c19ff2 100644 --- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c +++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c @@ -117,7 +117,7 @@ int dram_init(void) }
/* SPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_board_init(void) { #ifdef CONFIG_SD_BOOT diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index 28079a81517..555a8c0970b 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -194,7 +194,7 @@ int board_late_init(void) #endif
/* SPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_board_init(void) { #if CONFIG_NAND_BOOT diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index f9112fc5321..e296b0466aa 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -141,7 +141,7 @@ int dram_init(void) }
/* SPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_board_init(void) { #if CONFIG_NAND_BOOT diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index 0bdc6adbdc8..e820605d3b9 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -127,7 +127,7 @@ int dram_init(void) }
/* SPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_board_init(void) { #if CONFIG_NAND_BOOT diff --git a/board/avionic-design/tec-ng/Makefile b/board/avionic-design/tec-ng/Makefile index d6890e5797f..ec1710e137e 100644 --- a/board/avionic-design/tec-ng/Makefile +++ b/board/avionic-design/tec-ng/Makefile @@ -3,6 +3,6 @@ # (C) Copyright 2013 # Avionic Design GmbH <www.avionic-design.de>
-obj-$(CONFIG_SPL_BUILD) += tec-ng-spl.o +obj-$(CONFIG_XPL_BUILD) += tec-ng-spl.o
obj-y += ../common/tamonten-ng.o diff --git a/board/beacon/imx8mm/Makefile b/board/beacon/imx8mm/Makefile index 7d3bd3112cb..b33dc8b05b9 100644 --- a/board/beacon/imx8mm/Makefile +++ b/board/beacon/imx8mm/Makefile @@ -7,7 +7,7 @@ obj-y += imx8mm_beacon.o obj-y += ../../freescale/common/
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-y += lpddr4_timing.o endif diff --git a/board/beacon/imx8mn/Makefile b/board/beacon/imx8mn/Makefile index d620ccb7723..48b7b0952cc 100644 --- a/board/beacon/imx8mn/Makefile +++ b/board/beacon/imx8mn/Makefile @@ -6,7 +6,7 @@
obj-y += imx8mn_beacon.o obj-y += ../../freescale/common/ -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o ifdef CONFIG_IMX8MN_BEACON_2GB_LPDDR obj-y += lpddr4_2g_timing.o diff --git a/board/beacon/imx8mp/Makefile b/board/beacon/imx8mp/Makefile index 264720f6d49..7b994d2c8a1 100644 --- a/board/beacon/imx8mp/Makefile +++ b/board/beacon/imx8mp/Makefile @@ -7,7 +7,7 @@ obj-y += imx8mp_beacon.o obj-y += ../../freescale/common/
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/bitmain/antminer_s9/Makefile b/board/bitmain/antminer_s9/Makefile index 1af01d6d808..57580f3730b 100644 --- a/board/bitmain/antminer_s9/Makefile +++ b/board/bitmain/antminer_s9/Makefile @@ -6,4 +6,4 @@ obj-y += ../../xilinx/common/board.o # Remove quotes hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE))
-obj-$(CONFIG_SPL_BUILD) += $(hw-platform-y)/ps7_init_gpl.o +obj-$(CONFIG_XPL_BUILD) += $(hw-platform-y)/ps7_init_gpl.o diff --git a/board/bosch/acc/acc.c b/board/bosch/acc/acc.c index a1a00e7ffc4..4c7c9d38a44 100644 --- a/board/bosch/acc/acc.c +++ b/board/bosch/acc/acc.c @@ -269,7 +269,7 @@ int dram_init(void) return 0; }
-#if IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) #include <asm/arch/crm_regs.h> #include <asm/arch/imx-regs.h> #include <asm/arch/iomux.h> diff --git a/board/bosch/shc/board.c b/board/bosch/shc/board.c index 1f9dc2d8df1..02f51ca2ca8 100644 --- a/board/bosch/shc/board.c +++ b/board/bosch/shc/board.c @@ -259,7 +259,7 @@ static void check_button_status(void) } }
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #ifdef CONFIG_SPL_OS_BOOT int spl_start_uboot(void) { @@ -473,7 +473,7 @@ int board_late_init(void) #endif
#if defined(CONFIG_USB_ETHER) && \ - (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USB_ETHER)) + (!defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_USB_ETHER)) int board_eth_init(struct bd_info *bis) { return usb_eth_initialize(bis); diff --git a/board/bsh/imx6ulz_smm_m2/Makefile b/board/bsh/imx6ulz_smm_m2/Makefile index b761bbb2f90..59870419bdd 100644 --- a/board/bsh/imx6ulz_smm_m2/Makefile +++ b/board/bsh/imx6ulz_smm_m2/Makefile @@ -2,5 +2,5 @@ # (C) Copyright 2021 Amarula Solutions B.V.
obj-y := imx6ulz_smm_m2.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o
diff --git a/board/bsh/imx8mn_smm_s2/Makefile b/board/bsh/imx8mn_smm_s2/Makefile index 19d37a723ea..3050194ff89 100644 --- a/board/bsh/imx8mn_smm_s2/Makefile +++ b/board/bsh/imx8mn_smm_s2/Makefile @@ -6,7 +6,7 @@
obj-y += imx8mn_smm_s2.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_BSH_SMM_S2_DDR3L_256) += ddr3l_timing_256m.o obj-$(CONFIG_BSH_SMM_S2_DDR3L_512) += ddr3l_timing_512m.o diff --git a/board/bticino/mamoj/Makefile b/board/bticino/mamoj/Makefile index f1ddda48918..b83e667e828 100644 --- a/board/bticino/mamoj/Makefile +++ b/board/bticino/mamoj/Makefile @@ -5,4 +5,4 @@ #
obj-y := mamoj.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/board/cloos/imx8mm_phg/Makefile b/board/cloos/imx8mm_phg/Makefile index 2b36931fcf7..c3e54bfc2e0 100644 --- a/board/cloos/imx8mm_phg/Makefile +++ b/board/cloos/imx8mm_phg/Makefile @@ -6,7 +6,7 @@
obj-y += imx8mm_phg.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/compulab/cl-som-imx7/Makefile b/board/compulab/cl-som-imx7/Makefile index 8f0e068b7e9..35cf2c13562 100644 --- a/board/compulab/cl-som-imx7/Makefile +++ b/board/compulab/cl-som-imx7/Makefile @@ -10,7 +10,7 @@
obj-y := mux.o common.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-y += cl-som-imx7.o diff --git a/board/compulab/cl-som-imx7/common.h b/board/compulab/cl-som-imx7/common.h index bc19867f876..5b29763b340 100644 --- a/board/compulab/cl-som-imx7/common.h +++ b/board/compulab/cl-som-imx7/common.h @@ -18,7 +18,7 @@ PADS_SET_PROT(uart1_pads); PADS_SET_PROT(espi1_pads); #endif /* CONFIG_SPI */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #ifdef CONFIG_FSL_ESDHC_IMX PADS_SET_PROT(usdhc3_emmc_pads); #endif /* CONFIG_FSL_ESDHC_IMX */ @@ -28,4 +28,4 @@ PADS_SET_PROT(fec1_pads); #endif /* CONFIG_FEC_MXC */ PADS_SET_PROT(usb_otg1_pads); PADS_SET_PROT(wdog_pads); -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/board/compulab/cl-som-imx7/mux.c b/board/compulab/cl-som-imx7/mux.c index 25123ee145a..da8848b9f57 100644 --- a/board/compulab/cl-som-imx7/mux.c +++ b/board/compulab/cl-som-imx7/mux.c @@ -67,7 +67,7 @@ PADS_SET(espi1_pads)
#endif /* CONFIG_SPI */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#ifdef CONFIG_FSL_ESDHC_IMX
@@ -138,4 +138,4 @@ static iomux_v3_cfg_t const wdog_pads[] = {
PADS_SET(wdog_pads)
-#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/board/compulab/cm_fx6/Makefile b/board/compulab/cm_fx6/Makefile index e648db26a1d..e9f86cb8410 100644 --- a/board/compulab/cm_fx6/Makefile +++ b/board/compulab/cm_fx6/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> # # Authors: Nikita Kiryanov nikita@compulab.co.il -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y = common.o spl.o else obj-y = common.o cm_fx6.o diff --git a/board/compulab/cm_t43/Makefile b/board/compulab/cm_t43/Makefile index 6fa231a045e..221d1b432fd 100644 --- a/board/compulab/cm_t43/Makefile +++ b/board/compulab/cm_t43/Makefile @@ -4,7 +4,7 @@ # # Copyright (C) 2015 Compulab, Ltd.
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o mux.o else obj-y += cm_t43.o mux.o diff --git a/board/compulab/imx8mm-cl-iot-gate/Makefile b/board/compulab/imx8mm-cl-iot-gate/Makefile index 3800b21a6fd..7c2d6e508b3 100644 --- a/board/compulab/imx8mm-cl-iot-gate/Makefile +++ b/board/compulab/imx8mm-cl-iot-gate/Makefile @@ -7,7 +7,7 @@
obj-y += imx8mm-cl-iot-gate.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o eeprom_spl.o obj-y += ddr/ endif diff --git a/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c b/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c index 1256848f9a9..a22e6ef1d96 100644 --- a/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c +++ b/board/compulab/imx8mm-cl-iot-gate/eeprom_spl.c @@ -10,7 +10,7 @@ #include <asm/setup.h> #include <linux/delay.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
#define CFG_SYS_I2C_EEPROM_ADDR_P1 0x51
diff --git a/board/comvetia/lxr2/lxr2.c b/board/comvetia/lxr2/lxr2.c index 173263522bd..dc7fc202049 100644 --- a/board/comvetia/lxr2/lxr2.c +++ b/board/comvetia/lxr2/lxr2.c @@ -138,7 +138,7 @@ int board_late_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <spl.h>
#define MX6_PHYFLEX_ERR006282 IMX_GPIO_NR(2, 11) diff --git a/board/conclusive/kstr-sama5d27/kstr-sama5d27.c b/board/conclusive/kstr-sama5d27/kstr-sama5d27.c index 37750137ad9..15dba146eb8 100644 --- a/board/conclusive/kstr-sama5d27/kstr-sama5d27.c +++ b/board/conclusive/kstr-sama5d27/kstr-sama5d27.c @@ -141,7 +141,7 @@ int dram_init(void) }
/* SPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_board_init(void) { } diff --git a/board/congatec/cgtqmx8/Makefile b/board/congatec/cgtqmx8/Makefile index 4b59dbb6bc7..2a02cec4f15 100644 --- a/board/congatec/cgtqmx8/Makefile +++ b/board/congatec/cgtqmx8/Makefile @@ -6,6 +6,6 @@
obj-y += cgtqmx8.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o endif diff --git a/board/congatec/common/Makefile b/board/congatec/common/Makefile index 2db0fc1ae5c..f8170d9c653 100644 --- a/board/congatec/common/Makefile +++ b/board/congatec/common/Makefile @@ -7,7 +7,7 @@
MINIMAL=
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y diff --git a/board/data_modul/common/common.c b/board/data_modul/common/common.c index b4d74a8fd8b..b5f83908771 100644 --- a/board/data_modul/common/common.c +++ b/board/data_modul/common/common.c @@ -72,7 +72,7 @@ int board_phys_sdram_size(phys_size_t *size) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static void data_modul_imx_edm_sbc_early_init_f(const iomux_v3_cfg_t wdog_pad) { struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; diff --git a/board/data_modul/imx8mm_edm_sbc/Makefile b/board/data_modul/imx8mm_edm_sbc/Makefile index 6d72e930fca..3d8fedf74d4 100644 --- a/board/data_modul/imx8mm_edm_sbc/Makefile +++ b/board/data_modul/imx8mm_edm_sbc/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o lpddr4_timing_2G_32.o lpddr4_timing_4G_32.o else obj-y += imx8mm_data_modul_edm_sbc.o diff --git a/board/data_modul/imx8mp_edm_sbc/Makefile b/board/data_modul/imx8mp_edm_sbc/Makefile index 28c1d62f2bb..7e1fe855799 100644 --- a/board/data_modul/imx8mp_edm_sbc/Makefile +++ b/board/data_modul/imx8mp_edm_sbc/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o lpddr4_timing_4G_32.o else obj-y += imx8mp_data_modul_edm_sbc.o diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c index 03c34455c50..dc42a4a7b53 100644 --- a/board/davinci/da8xxevm/omapl138_lcdk.c +++ b/board/davinci/da8xxevm/omapl138_lcdk.c @@ -311,7 +311,7 @@ int board_mmc_init(struct bd_info *bis) #endif #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static const struct ns16550_plat serial_pdata = { .base = DAVINCI_UART2_BASE, .reg_shift = 2, diff --git a/board/dhelectronics/dh_imx6/Makefile b/board/dhelectronics/dh_imx6/Makefile index 70ca30d3971..7102a47450e 100644 --- a/board/dhelectronics/dh_imx6/Makefile +++ b/board/dhelectronics/dh_imx6/Makefile @@ -2,7 +2,7 @@ # # Copyright (C) 2017 Marek Vasut marex@denx.de
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := dh_imx6_spl.o else obj-y := dh_imx6.o diff --git a/board/dhelectronics/dh_imx8mp/Makefile b/board/dhelectronics/dh_imx8mp/Makefile index e5a29fdd122..7bc8dc21e64 100644 --- a/board/dhelectronics/dh_imx8mp/Makefile +++ b/board/dhelectronics/dh_imx8mp/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o lpddr4_timing_2G_32.o lpddr4_timing_4G_32.o else obj-y += imx8mp_dhcom_pdk2.o diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index 4f4f537fee5..073f32d1380 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -260,13 +260,13 @@ int board_stm32mp1_ddr_config_name_match(struct udevice *dev,
void board_vddcore_init(u32 voltage_mv) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) opp_voltage_mv = voltage_mv; }
int board_early_init_f(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) stpmic1_init(opp_voltage_mv); board_get_coding_straps();
@@ -767,7 +767,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) } #endif
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) void spl_perform_fixups(struct spl_image_info *spl_image) { dh_stm32_ks8851_fixup(spl_image_fdt_addr(spl_image)); diff --git a/board/ea/mx7ulp_com/mx7ulp_com.c b/board/ea/mx7ulp_com/mx7ulp_com.c index 8f78937e097..d3a65fd820b 100644 --- a/board/ea/mx7ulp_com/mx7ulp_com.c +++ b/board/ea/mx7ulp_com/mx7ulp_com.c @@ -52,7 +52,7 @@ int board_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <spl.h>
#ifdef CONFIG_SPL_LOAD_FIT diff --git a/board/eets/pdu001/board.c b/board/eets/pdu001/board.c index 00f9a5ef341..16af687d9cc 100644 --- a/board/eets/pdu001/board.c +++ b/board/eets/pdu001/board.c @@ -65,7 +65,7 @@ DECLARE_GLOBAL_DATA_PTR; #define CFG_SYS_RTC_SCRATCH0 0x60 #define BOOT_DEVICE_SAVE_REGISTER (RTC_BASE + CFG_SYS_RTC_SCRATCH0)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static void save_boot_device(void) { *((u32 *)(BOOT_DEVICE_SAVE_REGISTER)) = spl_boot_device(); diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c index cf3368c253b..5ed41d01d9b 100644 --- a/board/embest/mx6boards/mx6boards.c +++ b/board/embest/mx6boards/mx6boards.c @@ -394,7 +394,7 @@ int checkboard(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <spl.h>
void board_init_f(ulong dummy) diff --git a/board/engicam/common/Makefile b/board/engicam/common/Makefile index 15f0eaa1ec4..dc8be383c23 100644 --- a/board/engicam/common/Makefile +++ b/board/engicam/common/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ # Copyright (C) 2016 Amarula Solutions B.V.
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX6_ENGICAM_COMMON) += spl.o else obj-$(CONFIG_IMX6_ENGICAM_COMMON) += board.o diff --git a/board/engicam/imx8mm/Makefile b/board/engicam/imx8mm/Makefile index 3392d61920a..d6ad299f830 100644 --- a/board/engicam/imx8mm/Makefile +++ b/board/engicam/imx8mm/Makefile @@ -6,7 +6,7 @@
obj-y += icore_mx8mm.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-y += lpddr4_timing.o endif diff --git a/board/engicam/imx8mp/Makefile b/board/engicam/imx8mp/Makefile index c3ec09d6e38..f21a31b8078 100644 --- a/board/engicam/imx8mp/Makefile +++ b/board/engicam/imx8mp/Makefile @@ -6,7 +6,7 @@
obj-y += icore_mx8mp.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/engicam/stm32mp1/Makefile b/board/engicam/stm32mp1/Makefile index 155d33f9eec..9ac78e4d1aa 100644 --- a/board/engicam/stm32mp1/Makefile +++ b/board/engicam/stm32mp1/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2018, STMicroelectronics - All Rights Reserved #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-y += stm32mp1.o diff --git a/board/firefly/firefly-rk3288/firefly-rk3288.c b/board/firefly/firefly-rk3288/firefly-rk3288.c index 8e67ab4b132..c65ce5890e5 100644 --- a/board/firefly/firefly-rk3288/firefly-rk3288.c +++ b/board/firefly/firefly-rk3288/firefly-rk3288.c @@ -9,7 +9,7 @@ #include <asm/global_data.h> #include <dm/ofnode.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static int setup_led(void) { #ifdef CONFIG_SPL_LED diff --git a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c index a149e4fe822..6937a27176f 100644 --- a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c +++ b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c @@ -13,7 +13,7 @@ #include <asm/arch-rockchip/gpio.h> #include <asm/arch-rockchip/grf_rk3399.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
#define PMUGRF_BASE 0xff320000 #define GPIO0_BASE 0xff720000 diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index b4faf6f9e0a..c491dc8b241 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -5,7 +5,7 @@
MINIMAL=
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y @@ -29,14 +29,14 @@ endif obj-$(CONFIG_FSL_CADMUS) += cadmus.o obj-$(CONFIG_FSL_VIA) += cds_via.o obj-$(CONFIG_FMAN_ENET) += fman.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o endif obj-$(I2C_COMMON) += i2c_common.o obj-$(CONFIG_FSL_USE_PCA9547_MUX) += i2c_mux.o obj-$(CONFIG_$(SPL_)VID) += vid.o obj-$(CONFIG_FSL_QIXIS) += qixis.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o endif ifndef CONFIG_RAMBOOT_PBL diff --git a/board/freescale/common/cmd_esbc_validate.c b/board/freescale/common/cmd_esbc_validate.c index 3344653ba2d..7629d7091e9 100644 --- a/board/freescale/common/cmd_esbc_validate.c +++ b/board/freescale/common/cmd_esbc_validate.c @@ -23,7 +23,7 @@ loop: return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_esbc_validate(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c index 27a33924c84..194a0907e72 100644 --- a/board/freescale/common/fsl_chain_of_trust.c +++ b/board/freescale/common/fsl_chain_of_trust.c @@ -15,7 +15,7 @@ #include <dm/root.h> #include <asm/fsl_secure_boot.h>
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_FRAMEWORK) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_FRAMEWORK) #include <spl.h> #endif
@@ -67,7 +67,7 @@ int fsl_check_boot_mode_secure(void) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int fsl_setenv_chain_of_trust(void) { /* Check Boot Mode @@ -92,7 +92,7 @@ int fsl_setenv_chain_of_trust(void) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr) { int res; @@ -157,4 +157,4 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) image_entry(); } #endif /* ifdef CONFIG_SPL_FRAMEWORK */ -#endif /* ifdef CONFIG_SPL_BUILD */ +#endif /* ifdef CONFIG_XPL_BUILD */ diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c index 657f4533bcd..df0c1a1f406 100644 --- a/board/freescale/common/fsl_validate.c +++ b/board/freescale/common/fsl_validate.c @@ -396,7 +396,7 @@ static void fsl_secboot_bootscript_parse_failure(void) */ void fsl_secboot_handle_error(int error) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD const struct fsl_secboot_errcode *e;
for (e = fsl_secboot_errcodes; e->errcode != ERROR_ESBC_CLIENT_MAX; @@ -807,7 +807,7 @@ static int calculate_cmp_img_sig(struct fsl_secboot_img_priv *img) prop.num_bits = key_len * 8; prop.exp_len = key_len;
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) ret = device_bind_driver(NULL, "fsl_rsa_mod_exp", "fsl_rsa_mod_exp", NULL); if (ret) { printf("Couldn't bind fsl_rsa_mod_exp driver (%d)\n", ret); diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 6400ac05245..7815ba2dbce 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -161,7 +161,7 @@ void board_deassert_mem_reset(void) } #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static void qixis_reset(void) { QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET); diff --git a/board/freescale/imx8mm_evk/Makefile b/board/freescale/imx8mm_evk/Makefile index 1db7b62cafc..9fecd8dd8cb 100644 --- a/board/freescale/imx8mm_evk/Makefile +++ b/board/freescale/imx8mm_evk/Makefile @@ -6,7 +6,7 @@
obj-y += imx8mm_evk.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/freescale/imx8mn_evk/Makefile b/board/freescale/imx8mn_evk/Makefile index 42d1179724d..5ef666a36dd 100644 --- a/board/freescale/imx8mn_evk/Makefile +++ b/board/freescale/imx8mn_evk/Makefile @@ -6,7 +6,7 @@
obj-y += imx8mn_evk.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o ifdef CONFIG_IMX8MN_LOW_DRIVE_MODE obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing_ld.o diff --git a/board/freescale/imx8mp_evk/Makefile b/board/freescale/imx8mp_evk/Makefile index 106bf9a1edf..3c154d7f7f5 100644 --- a/board/freescale/imx8mp_evk/Makefile +++ b/board/freescale/imx8mp_evk/Makefile @@ -6,7 +6,7 @@
obj-y += imx8mp_evk.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/freescale/imx8mq_evk/Makefile b/board/freescale/imx8mq_evk/Makefile index cf046963d25..ca449e6f369 100644 --- a/board/freescale/imx8mq_evk/Makefile +++ b/board/freescale/imx8mq_evk/Makefile @@ -6,7 +6,7 @@
obj-y += imx8mq_evk.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o lpddr4_timing_b0.o endif diff --git a/board/freescale/imx8qm_mek/Makefile b/board/freescale/imx8qm_mek/Makefile index bc9a1260bde..53b33a0dfb1 100644 --- a/board/freescale/imx8qm_mek/Makefile +++ b/board/freescale/imx8qm_mek/Makefile @@ -5,4 +5,4 @@ #
obj-y += imx8qm_mek.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/board/freescale/imx8qxp_mek/Makefile b/board/freescale/imx8qxp_mek/Makefile index acaadcd84a4..459ec771eea 100644 --- a/board/freescale/imx8qxp_mek/Makefile +++ b/board/freescale/imx8qxp_mek/Makefile @@ -5,4 +5,4 @@ #
obj-y += imx8qxp_mek.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/board/freescale/imx8ulp_evk/Makefile b/board/freescale/imx8ulp_evk/Makefile index 1cf148ab910..7819b2675b3 100644 --- a/board/freescale/imx8ulp_evk/Makefile +++ b/board/freescale/imx8ulp_evk/Makefile @@ -2,7 +2,7 @@
obj-y += imx8ulp_evk.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o ifdef CONFIG_IMX8ULP_ND_MODE obj-y += lpddr4_timing_264.o diff --git a/board/freescale/imx93_evk/Makefile b/board/freescale/imx93_evk/Makefile index ede8d20ff5c..b077acc70a5 100644 --- a/board/freescale/imx93_evk/Makefile +++ b/board/freescale/imx93_evk/Makefile @@ -6,7 +6,7 @@
obj-y += imx93_evk.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX93_EVK_LPDDR4X) += lpddr4x_timing.o lpddr4x_timing_1866mts.o endif diff --git a/board/freescale/imxrt1020-evk/imxrt1020-evk.c b/board/freescale/imxrt1020-evk/imxrt1020-evk.c index 42a0a67ae93..11dbef84688 100644 --- a/board/freescale/imxrt1020-evk/imxrt1020-evk.c +++ b/board/freescale/imxrt1020-evk/imxrt1020-evk.c @@ -37,7 +37,7 @@ int dram_init_banksize(void) return fdtdec_setup_memory_banksize(); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #ifdef CONFIG_SPL_OS_BOOT int spl_start_uboot(void) { diff --git a/board/freescale/imxrt1050-evk/imxrt1050-evk.c b/board/freescale/imxrt1050-evk/imxrt1050-evk.c index 46a644908e9..056489932ac 100644 --- a/board/freescale/imxrt1050-evk/imxrt1050-evk.c +++ b/board/freescale/imxrt1050-evk/imxrt1050-evk.c @@ -37,7 +37,7 @@ int dram_init_banksize(void) return fdtdec_setup_memory_banksize(); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #ifdef CONFIG_SPL_OS_BOOT int spl_start_uboot(void) { diff --git a/board/freescale/imxrt1170-evk/imxrt1170-evk.c b/board/freescale/imxrt1170-evk/imxrt1170-evk.c index e10b8830ec6..047aea8181a 100644 --- a/board/freescale/imxrt1170-evk/imxrt1170-evk.c +++ b/board/freescale/imxrt1170-evk/imxrt1170-evk.c @@ -37,7 +37,7 @@ int dram_init_banksize(void) return fdtdec_setup_memory_banksize(); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #ifdef CONFIG_SPL_OS_BOOT int spl_start_uboot(void) { diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c index dae2cf097bc..f157e75e385 100644 --- a/board/freescale/ls1012afrdm/ls1012afrdm.c +++ b/board/freescale/ls1012afrdm/ls1012afrdm.c @@ -140,7 +140,7 @@ int dram_init(void) #endif mmdc_init(&mparam);
-#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); #endif diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c index 7d56eb0117d..b21c4d917d0 100644 --- a/board/freescale/ls1012aqds/ls1012aqds.c +++ b/board/freescale/ls1012aqds/ls1012aqds.c @@ -88,7 +88,7 @@ int dram_init(void)
mmdc_init(&mparam); gd->ram_size = CFG_SYS_SDRAM_SIZE; -#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); #endif diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c index 5f0564f1b23..ab69eab8408 100644 --- a/board/freescale/ls1012ardb/ls1012ardb.c +++ b/board/freescale/ls1012ardb/ls1012ardb.c @@ -138,7 +138,7 @@ int dram_init(void) #endif
gd->ram_size = CFG_SYS_SDRAM_SIZE; -#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); #endif diff --git a/board/freescale/ls1021aiot/ls1021aiot.c b/board/freescale/ls1021aiot/ls1021aiot.c index 2fdac87bc29..4eff0a3fee0 100644 --- a/board/freescale/ls1021aiot/ls1021aiot.c +++ b/board/freescale/ls1021aiot/ls1021aiot.c @@ -99,7 +99,7 @@ void ddrmc_init(void)
int dram_init(void) { -#if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) +#if (!defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD)) ddrmc_init(); #endif
@@ -125,7 +125,7 @@ int board_early_init_f(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { /* Clear the BSS */ diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c index 5b0f23688f0..fd897e832c8 100644 --- a/board/freescale/ls1021aqds/ddr.c +++ b/board/freescale/ls1021aqds/ddr.c @@ -172,14 +172,14 @@ int fsl_initdram(void) { phys_size_t dram_size;
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL) +#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_SPL) puts("Initializing DDR....using SPD\n"); dram_size = fsl_ddr_sdram(); #else dram_size = fsl_ddr_sdram_size(); #endif
-#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_XPL_BUILD) fsl_dp_resume(); #endif
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 930ef6be385..0bdd468d9a7 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -181,7 +181,7 @@ int board_early_init_f(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { #ifdef CONFIG_NAND_BOOT diff --git a/board/freescale/ls1021atsn/ls1021atsn.c b/board/freescale/ls1021atsn/ls1021atsn.c index b7e043b2e62..d1acccec110 100644 --- a/board/freescale/ls1021atsn/ls1021atsn.c +++ b/board/freescale/ls1021atsn/ls1021atsn.c @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
static void ddrmc_init(void) { -#if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) +#if (!defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD)) struct ccsr_ddr *ddr = (struct ccsr_ddr *)CFG_SYS_FSL_DDR_ADDR; u32 temp_sdram_cfg, tmp;
@@ -105,7 +105,7 @@ static void ddrmc_init(void) out_be32(&ddr->sdram_cfg_2, temp_sdram_cfg); } #endif -#endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */ +#endif /* !defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD) */ }
int dram_init(void) @@ -116,7 +116,7 @@ int dram_init(void)
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
-#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_XPL_BUILD) fsl_dp_resume(); #endif
@@ -156,7 +156,7 @@ int board_early_init_f(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { void (*second_uboot)(void); @@ -214,7 +214,7 @@ int board_init(void) return 0; }
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) void spl_board_init(void) { ls102xa_smmu_stream_id_init(); diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 78006afce86..cc9665c0410 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -224,7 +224,7 @@ void ddrmc_init(void)
int dram_init(void) { -#if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) +#if (!defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD)) ddrmc_init(); #endif
@@ -232,7 +232,7 @@ int dram_init(void)
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
-#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_XPL_BUILD) fsl_dp_resume(); #endif
@@ -407,7 +407,7 @@ int board_early_init_f(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { void (*second_uboot)(void); @@ -527,7 +527,7 @@ int board_init(void) return 0; }
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) void spl_board_init(void) { if (IS_ENABLED(CONFIG_FSL_CAAM)) { @@ -607,7 +607,7 @@ u16 flash_read16(void *addr) }
#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) \ - && !defined(CONFIG_SPL_BUILD) + && !defined(CONFIG_XPL_BUILD) static void convert_flash_bank(char bank) { struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c index e01b5a8c2eb..db94d9c1fa8 100644 --- a/board/freescale/ls1028a/ls1028a.c +++ b/board/freescale/ls1028a/ls1028a.c @@ -123,7 +123,7 @@ int board_early_init_f(void) u8 uart; #endif
-#if defined(CONFIG_SYS_I2C_EARLY_INIT) && defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_I2C_EARLY_INIT) && defined(CONFIG_XPL_BUILD) i2c_early_init_f(); #endif
diff --git a/board/freescale/ls1043aqds/Makefile b/board/freescale/ls1043aqds/Makefile index 49d8d7d9b96..ff830788fd7 100644 --- a/board/freescale/ls1043aqds/Makefile +++ b/board/freescale/ls1043aqds/Makefile @@ -5,7 +5,7 @@ #
obj-y += ddr.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += eth.o endif obj-y += ls1043aqds.o diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c index 2a9717df616..137ad7395ad 100644 --- a/board/freescale/ls1043aqds/ddr.c +++ b/board/freescale/ls1043aqds/ddr.c @@ -123,7 +123,7 @@ int fsl_initdram(void) { phys_size_t dram_size;
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD) gd->ram_size = fsl_ddr_sdram_size();
return 0; diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index 2ecf5a74a03..f043599fbb8 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -288,7 +288,7 @@ int dram_init(void) select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); fsl_initdram(); #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \ - defined(CONFIG_SPL_BUILD) + defined(CONFIG_XPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); #endif diff --git a/board/freescale/ls1043ardb/Makefile b/board/freescale/ls1043ardb/Makefile index 5309576c688..95745bf3a9c 100644 --- a/board/freescale/ls1043ardb/Makefile +++ b/board/freescale/ls1043ardb/Makefile @@ -4,7 +4,7 @@
obj-y += ddr.o obj-y += ls1043ardb.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_NET) += eth.o obj-y += cpld.o endif diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c index 187925e981a..231b60d1b3d 100644 --- a/board/freescale/ls1043ardb/ddr.c +++ b/board/freescale/ls1043ardb/ddr.c @@ -225,14 +225,14 @@ int fsl_initdram(void) phys_size_t dram_size;
#ifdef CONFIG_SYS_DDR_RAW_TIMING -#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL) +#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_SPL) puts("Initializing DDR....\n"); dram_size = fsl_ddr_sdram(); #else dram_size = fsl_ddr_sdram_size(); #endif #else -#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL) +#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_SPL) puts("Initialzing DDR using fixed setting\n"); dram_size = fixed_sdram(); #else diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index cf84ff9e638..bba041065b5 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -132,7 +132,7 @@ int board_early_init_f(void) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
int checkboard(void) { diff --git a/board/freescale/ls1046aqds/Makefile b/board/freescale/ls1046aqds/Makefile index 6267522cc26..365247d92bc 100644 --- a/board/freescale/ls1046aqds/Makefile +++ b/board/freescale/ls1046aqds/Makefile @@ -5,7 +5,7 @@ #
obj-y += ddr.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += eth.o endif obj-y += ls1046aqds.o diff --git a/board/freescale/ls1046aqds/ddr.c b/board/freescale/ls1046aqds/ddr.c index ac1b6049721..57790335f0a 100644 --- a/board/freescale/ls1046aqds/ddr.c +++ b/board/freescale/ls1046aqds/ddr.c @@ -107,7 +107,7 @@ int fsl_initdram(void) { phys_size_t dram_size;
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD) gd->ram_size = fsl_ddr_sdram_size();
return 0; diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index a83b2170651..7df12550868 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -284,7 +284,7 @@ int dram_init(void) select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); fsl_initdram(); #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \ - defined(CONFIG_SPL_BUILD) + defined(CONFIG_XPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); #endif diff --git a/board/freescale/ls1046ardb/Makefile b/board/freescale/ls1046ardb/Makefile index 1c13ed6b6f0..9e5d24f53c8 100644 --- a/board/freescale/ls1046ardb/Makefile +++ b/board/freescale/ls1046ardb/Makefile @@ -4,7 +4,7 @@
obj-y += ddr.o obj-y += ls1046ardb.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_NET) += eth.o obj-y += cpld.o endif diff --git a/board/freescale/ls1046ardb/ddr.c b/board/freescale/ls1046ardb/ddr.c index 68353022e7d..4170666c420 100644 --- a/board/freescale/ls1046ardb/ddr.c +++ b/board/freescale/ls1046ardb/ddr.c @@ -113,7 +113,7 @@ int fsl_initdram(void) { phys_size_t dram_size;
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD) gd->ram_size = fsl_ddr_sdram_size();
return 0; diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c index 0492f0a8c0a..83b280f7646 100644 --- a/board/freescale/ls1046ardb/ls1046ardb.c +++ b/board/freescale/ls1046ardb/ls1046ardb.c @@ -44,7 +44,7 @@ int board_early_init_f(void) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int checkboard(void) { static const char *freq[2] = {"100.00MHZ", "156.25MHZ"}; diff --git a/board/freescale/ls1088a/Makefile b/board/freescale/ls1088a/Makefile index c2b0e7dc0f4..e54d6cad9e1 100644 --- a/board/freescale/ls1088a/Makefile +++ b/board/freescale/ls1088a/Makefile @@ -4,7 +4,7 @@
obj-y += ls1088a.o obj-y += ddr.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_TARGET_LS1088ARDB) += eth_ls1088ardb.o obj-$(CONFIG_TARGET_LS1088AQDS) += eth_ls1088aqds.o endif diff --git a/board/freescale/ls1088a/ddr.c b/board/freescale/ls1088a/ddr.c index 54b432ad794..cd590af9534 100644 --- a/board/freescale/ls1088a/ddr.c +++ b/board/freescale/ls1088a/ddr.c @@ -13,7 +13,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_VID) && (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) +#if defined(CONFIG_VID) && (!defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD)) static void fsl_ddr_setup_0v9_volt(memctl_options_t *popts) { int vdd; @@ -101,7 +101,7 @@ found: popts->addr_hash = 1;
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); -#if defined(CONFIG_VID) && (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) +#if defined(CONFIG_VID) && (!defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD)) fsl_ddr_setup_0v9_volt(popts); #endif
@@ -124,7 +124,7 @@ int fsl_initdram(void) { puts("Initializing DDR....using SPD\n");
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD) gd->ram_size = fsl_ddr_sdram_size(); #else gd->ram_size = fsl_ddr_sdram(); diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c index 58951f2bb2a..9f4eb4811d9 100644 --- a/board/freescale/ls1088a/ls1088a.c +++ b/board/freescale/ls1088a/ls1088a.c @@ -248,7 +248,7 @@ int fixup_ls1088ardb_pb_banner(void *fdt) return 0; }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) int checkboard(void) { #ifdef CONFIG_TFABOOT @@ -421,7 +421,7 @@ unsigned long get_board_ddr_clk(void) } #endif
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) void board_retimer_init(void) { u8 reg; @@ -804,7 +804,7 @@ exit: return ret; }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) int board_init(void) { init_final_memctl_regs(); @@ -995,7 +995,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) return 0; } #endif -#endif /* defined(CONFIG_SPL_BUILD) */ +#endif /* defined(CONFIG_XPL_BUILD) */
#ifdef CONFIG_TFABOOT #ifdef CONFIG_MTD_NOR_FLASH diff --git a/board/freescale/ls2080aqds/ddr.c b/board/freescale/ls2080aqds/ddr.c index d19c061e122..31ed72c949b 100644 --- a/board/freescale/ls2080aqds/ddr.c +++ b/board/freescale/ls2080aqds/ddr.c @@ -168,7 +168,7 @@ int fsl_initdram(void) #else int fsl_initdram(void) { -#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD) gd->ram_size = fsl_ddr_sdram_size(); #else puts("Initializing DDR....using SPD\n"); diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index 4c8d0706688..aba0560181a 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -264,7 +264,7 @@ void detail_board_ddr_info(void) #endif }
-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) void fdt_fixup_board_enet(void *fdt) { int offset; @@ -323,7 +323,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
fsl_fdt_fixup_dr_usb(blob, bd);
-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) fdt_fixup_board_enet(blob); fdt_reserve_mc_mem(blob, 0x300); #endif diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c index a1a97f9f8c2..e56667c846f 100644 --- a/board/freescale/ls2080ardb/ddr.c +++ b/board/freescale/ls2080ardb/ddr.c @@ -173,7 +173,7 @@ int fsl_initdram(void) #else int fsl_initdram(void) { -#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD) gd->ram_size = fsl_ddr_sdram_size(); #else puts("Initializing DDR....using SPD\n"); diff --git a/board/freescale/ls2080ardb/eth_ls2080rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c index 7fc4fecf774..7d5beb32417 100644 --- a/board/freescale/ls2080ardb/eth_ls2080rdb.c +++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c @@ -12,7 +12,7 @@ DECLARE_GLOBAL_DATA_PTR; int board_eth_init(struct bd_info *bis) {
-#if defined(CONFIG_PHY_AQUANTIA) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_PHY_AQUANTIA) && !defined(CONFIG_XPL_BUILD) /* * Export functions to be used by AQ firmware * upload application diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index 3aa984dab8e..341f82ce724 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -58,7 +58,7 @@ DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void) { -#if defined(CONFIG_SYS_I2C_EARLY_INIT) && defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_I2C_EARLY_INIT) && defined(CONFIG_XPL_BUILD) i2c_early_init_f(); #endif
diff --git a/board/freescale/mx23evk/Makefile b/board/freescale/mx23evk/Makefile index 6fe6992a5fc..5cc99ab1836 100644 --- a/board/freescale/mx23evk/Makefile +++ b/board/freescale/mx23evk/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y := mx23evk.o else obj-y := spl_boot.o diff --git a/board/freescale/mx28evk/Makefile b/board/freescale/mx28evk/Makefile index 057760433da..1fd2a439f7a 100644 --- a/board/freescale/mx28evk/Makefile +++ b/board/freescale/mx28evk/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y := mx28evk.o else obj-y := iomux.o diff --git a/board/freescale/mx6memcal/Makefile b/board/freescale/mx6memcal/Makefile index fc2d3eb9e10..b4088b9f2ec 100644 --- a/board/freescale/mx6memcal/Makefile +++ b/board/freescale/mx6memcal/Makefile @@ -4,7 +4,7 @@ # # (C) Copyright 2011 Freescale Semiconductor, Inc.
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := spl.o else obj-y := mx6memcal.o diff --git a/board/freescale/mx6sabreauto/mx6sabreauto.c b/board/freescale/mx6sabreauto/mx6sabreauto.c index bab62fd4421..8ca57e0b2ac 100644 --- a/board/freescale/mx6sabreauto/mx6sabreauto.c +++ b/board/freescale/mx6sabreauto/mx6sabreauto.c @@ -545,7 +545,7 @@ int board_ehci_hcd_init(int port) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <asm/arch/mx6-ddr.h> #include <spl.h> #include <linux/libfdt.h> diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index bb066a5d36c..dff3a9c33bf 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -507,7 +507,7 @@ int board_late_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <asm/arch/mx6-ddr.h> #include <spl.h> #include <linux/libfdt.h> diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index d37d8a4136f..fb145fa6aac 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -61,7 +61,7 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), };
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static iomux_v3_cfg_t const usdhc1_pads[] = { /* 8 bit SD */ MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -195,7 +195,7 @@ int checkboard(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <spl.h> #include <linux/libfdt.h>
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index e5a0197e2fd..c4ab59da78c 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -123,7 +123,7 @@ static int board_qspi_init(void) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ @@ -346,7 +346,7 @@ void board_preboot_os(void) gpio_set_value(IMX_GPIO_NR(5, 9), 0); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <linux/libfdt.h> #include <spl.h> #include <asm/arch/mx6-ddr.h> diff --git a/board/freescale/p1010rdb/Makefile b/board/freescale/p1010rdb/Makefile index a00806e6aae..df4e8001d38 100644 --- a/board/freescale/p1010rdb/Makefile +++ b/board/freescale/p1010rdb/Makefile @@ -4,7 +4,7 @@
MINIMAL=
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y @@ -15,7 +15,7 @@ endif ifdef MINIMAL obj-y += spl_minimal.o else -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o endif obj-y += p1010rdb.o diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index e386840d9ef..9b4b6f34f46 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -656,7 +656,7 @@ int misc_init_r(void) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int pin_mux_cmd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c index 44acebaa2bb..aa130ccf78b 100644 --- a/board/freescale/p1010rdb/tlb.c +++ b/board/freescale/p1010rdb/tlb.c @@ -41,7 +41,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1),
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_16M, 1), diff --git a/board/freescale/p1_p2_rdb_pc/Makefile b/board/freescale/p1_p2_rdb_pc/Makefile index cbdb2507e83..8c13813e3b0 100644 --- a/board/freescale/p1_p2_rdb_pc/Makefile +++ b/board/freescale/p1_p2_rdb_pc/Makefile @@ -4,7 +4,7 @@
MINIMAL=
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y @@ -15,7 +15,7 @@ endif ifdef MINIMAL obj-y += spl_minimal.o else -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o endif obj-y += p1_p2_rdb_pc.o diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c index ae0b7adbe54..f27821418eb 100644 --- a/board/freescale/p1_p2_rdb_pc/tlb.c +++ b/board/freescale/p1_p2_rdb_pc/tlb.c @@ -37,7 +37,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1),
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* W**G* - Flash/promjet, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, diff --git a/board/freescale/t102xrdb/Makefile b/board/freescale/t102xrdb/Makefile index e597486c940..b0f27c47191 100644 --- a/board/freescale/t102xrdb/Makefile +++ b/board/freescale/t102xrdb/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-y += t102xrdb.o diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c index f8d504fb3c7..1a8a131cdcc 100644 --- a/board/freescale/t102xrdb/ddr.c +++ b/board/freescale/t102xrdb/ddr.c @@ -236,7 +236,7 @@ int dram_init(void) { phys_size_t dram_size;
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) +#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) #ifndef CONFIG_SYS_DDR_RAW_TIMING puts("Initializing....using SPD\n"); #endif @@ -248,7 +248,7 @@ int dram_init(void) dram_size = setup_ddr_tlbs(dram_size / 0x100000); dram_size *= 0x100000;
-#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_XPL_BUILD) fsl_dp_resume(); #endif
diff --git a/board/freescale/t102xrdb/tlb.c b/board/freescale/t102xrdb/tlb.c index 008bd6e72b7..8e99c2c7022 100644 --- a/board/freescale/t102xrdb/tlb.c +++ b/board/freescale/t102xrdb/tlb.c @@ -53,7 +53,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1),
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* *I*G* - PCI */ SET_TLB_ENTRY(1, CFG_SYS_PCIE1_MEM_VIRT, CFG_SYS_PCIE1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -100,7 +100,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 11, BOOKE_PAGESZ_256K, 1), #endif
-#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_XPL_BUILD) SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 12, BOOKE_PAGESZ_1G, 1), diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile index a9495019430..9bca1a1fbcc 100644 --- a/board/freescale/t104xrdb/Makefile +++ b/board/freescale/t104xrdb/Makefile @@ -2,7 +2,7 @@ # # Copyright 2013 Freescale Semiconductor, Inc.
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-y += t104xrdb.o diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c index bab684860da..6c066480b46 100644 --- a/board/freescale/t104xrdb/ddr.c +++ b/board/freescale/t104xrdb/ddr.c @@ -129,7 +129,7 @@ int dram_init(void) { phys_size_t dram_size;
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) +#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) puts("Initializing....using SPD\n"); dram_size = fsl_ddr_sdram(); #else @@ -138,7 +138,7 @@ int dram_init(void) dram_size = setup_ddr_tlbs(dram_size / 0x100000); dram_size *= 0x100000;
-#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_XPL_BUILD) fsl_dp_resume(); #endif
diff --git a/board/freescale/t104xrdb/tlb.c b/board/freescale/t104xrdb/tlb.c index 24bc83f756b..7b2183da8b0 100644 --- a/board/freescale/t104xrdb/tlb.c +++ b/board/freescale/t104xrdb/tlb.c @@ -38,7 +38,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_256K, 1),
-#elif defined(CONFIG_NXP_ESBC) && defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_NXP_ESBC) && defined(CONFIG_XPL_BUILD) /* * *I*G - L3SRAM. When L3 is used as 256K SRAM, in case of Secure Boot * the physical address of the SRAM is at 0xbffc0000, @@ -66,7 +66,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1),
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* *I*G* - PCI */ SET_TLB_ENTRY(1, CFG_SYS_PCIE1_MEM_VIRT, CFG_SYS_PCIE1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -118,7 +118,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 11, BOOKE_PAGESZ_256K, 1), #endif
-#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_XPL_BUILD) SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 12, BOOKE_PAGESZ_1G, 1), diff --git a/board/freescale/t208xqds/Makefile b/board/freescale/t208xqds/Makefile index de8613058de..eb99d921b4a 100644 --- a/board/freescale/t208xqds/Makefile +++ b/board/freescale/t208xqds/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-$(CONFIG_TARGET_T2080QDS) += t208xqds.o eth_t208xqds.o diff --git a/board/freescale/t208xqds/ddr.c b/board/freescale/t208xqds/ddr.c index 9076fbba10a..77c8ce0c870 100644 --- a/board/freescale/t208xqds/ddr.c +++ b/board/freescale/t208xqds/ddr.c @@ -109,7 +109,7 @@ int dram_init(void) { phys_size_t dram_size;
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) +#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) puts("Initializing....using SPD\n"); dram_size = fsl_ddr_sdram(); #else diff --git a/board/freescale/t208xqds/tlb.c b/board/freescale/t208xqds/tlb.c index a4cc532acda..08c140afc68 100644 --- a/board/freescale/t208xqds/tlb.c +++ b/board/freescale/t208xqds/tlb.c @@ -65,7 +65,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1),
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* *I*G* - PCIe 1, 0x80000000 */ SET_TLB_ENTRY(1, CFG_SYS_PCIE1_MEM_VIRT, CFG_SYS_PCIE1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -142,7 +142,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 18, BOOKE_PAGESZ_1M, 1), #endif
-#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_XPL_BUILD) SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 19, BOOKE_PAGESZ_2G, 1) diff --git a/board/freescale/t208xrdb/Makefile b/board/freescale/t208xrdb/Makefile index 7af3cd0ac4c..e5ef250c8b2 100644 --- a/board/freescale/t208xrdb/Makefile +++ b/board/freescale/t208xrdb/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-$(CONFIG_TARGET_T2080RDB) += t208xrdb.o eth_t208xrdb.o cpld.o diff --git a/board/freescale/t208xrdb/ddr.c b/board/freescale/t208xrdb/ddr.c index fe98f62668a..cc9586eaa14 100644 --- a/board/freescale/t208xrdb/ddr.c +++ b/board/freescale/t208xrdb/ddr.c @@ -102,7 +102,7 @@ int dram_init(void) { phys_size_t dram_size;
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) +#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) puts("Initializing....using SPD\n"); dram_size = fsl_ddr_sdram(); #else diff --git a/board/freescale/t208xrdb/tlb.c b/board/freescale/t208xrdb/tlb.c index a9a03908dfb..a3f283548f3 100644 --- a/board/freescale/t208xrdb/tlb.c +++ b/board/freescale/t208xrdb/tlb.c @@ -65,7 +65,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1),
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* *I*G* - PCIe 1, 0x80000000 */ SET_TLB_ENTRY(1, CFG_SYS_PCIE1_MEM_VIRT, CFG_SYS_PCIE1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -141,7 +141,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, 0, 18, BOOKE_PAGESZ_1M, 1), #endif -#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_XPL_BUILD) SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 19, BOOKE_PAGESZ_2G, 1) diff --git a/board/freescale/t4rdb/Makefile b/board/freescale/t4rdb/Makefile index 3106848639c..8d94faaba1c 100644 --- a/board/freescale/t4rdb/Makefile +++ b/board/freescale/t4rdb/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-$(CONFIG_TARGET_T4240RDB) += t4240rdb.o diff --git a/board/freescale/t4rdb/cpld.c b/board/freescale/t4rdb/cpld.c index cd14d5895f5..f076350c1c5 100644 --- a/board/freescale/t4rdb/cpld.c +++ b/board/freescale/t4rdb/cpld.c @@ -94,7 +94,7 @@ static void cpld_dump_regs(void) } #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int do_cpld(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { int rc = 0; diff --git a/board/freescale/t4rdb/ddr.c b/board/freescale/t4rdb/ddr.c index bbe31d4a54e..1ce70962264 100644 --- a/board/freescale/t4rdb/ddr.c +++ b/board/freescale/t4rdb/ddr.c @@ -111,7 +111,7 @@ int dram_init(void)
puts("Initializing....using SPD\n");
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) +#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) dram_size = fsl_ddr_sdram(); #else /* DDR has been initialised by first stage boot loader */ diff --git a/board/freescale/t4rdb/tlb.c b/board/freescale/t4rdb/tlb.c index 1fb9d41d52b..7c58c14f3b6 100644 --- a/board/freescale/t4rdb/tlb.c +++ b/board/freescale/t4rdb/tlb.c @@ -51,7 +51,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1),
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* *I*G* - PCI */ SET_TLB_ENTRY(1, CFG_SYS_PCIE1_MEM_VIRT, CFG_SYS_PCIE1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -114,7 +114,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SW|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 17, BOOKE_PAGESZ_4K, 1), #endif -#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_XPL_BUILD) SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 18, BOOKE_PAGESZ_2G, 1) diff --git a/board/gardena/smart-gateway-at91sam/Makefile b/board/gardena/smart-gateway-at91sam/Makefile index a2ed79fd06c..ac9e57938b3 100644 --- a/board/gardena/smart-gateway-at91sam/Makefile +++ b/board/gardena/smart-gateway-at91sam/Makefile @@ -2,6 +2,6 @@
obj-y += board.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o endif diff --git a/board/gardena/smart-gateway-mt7688/board.c b/board/gardena/smart-gateway-mt7688/board.c index eb7fcd630a1..b6c0fe960ea 100644 --- a/board/gardena/smart-gateway-mt7688/board.c +++ b/board/gardena/smart-gateway-mt7688/board.c @@ -295,7 +295,7 @@ err_free: return ret; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD U_BOOT_CMD( fd_write, 1, 0, do_fd_write, "Write test factory-data values to SPI NOR", diff --git a/board/gateworks/gw_ventana/Makefile b/board/gateworks/gw_ventana/Makefile index c407f8e6c54..08859a963d0 100644 --- a/board/gateworks/gw_ventana/Makefile +++ b/board/gateworks/gw_ventana/Makefile @@ -7,4 +7,4 @@ #
obj-y := gw_ventana.o eeprom.o common.o -obj-$(CONFIG_SPL_BUILD) += gw_ventana_spl.o +obj-$(CONFIG_XPL_BUILD) += gw_ventana_spl.o diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c index b37f1972249..447862dfee1 100644 --- a/board/gateworks/gw_ventana/eeprom.c +++ b/board/gateworks/gw_ventana/eeprom.c @@ -327,7 +327,7 @@ struct ventana_eeprom_config econfig[] = { { /* Sentinel */ } };
-#if defined(CONFIG_CMD_EECONFIG) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_EECONFIG) && !defined(CONFIG_XPL_BUILD) static struct ventana_eeprom_config *get_config(const char *name) { struct ventana_eeprom_config *cfg = econfig; diff --git a/board/gateworks/venice/Makefile b/board/gateworks/venice/Makefile index faf1348cfa9..ab69e07ba7b 100644 --- a/board/gateworks/venice/Makefile +++ b/board/gateworks/venice/Makefile @@ -6,7 +6,7 @@
obj-y += venice.o eeprom.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o ifdef CONFIG_IMX8MM obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing_imx8mm.o diff --git a/board/gdsys/a38x/Makefile b/board/gdsys/a38x/Makefile index 4b13859fed1..2713633730f 100644 --- a/board/gdsys/a38x/Makefile +++ b/board/gdsys/a38x/Makefile @@ -6,6 +6,6 @@
obj-$(CONFIG_TARGET_CONTROLCENTERDC) += controlcenterdc.o hre.o keyprogram.o dt_helpers.o
-ifeq ($(CONFIG_SPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD),) obj-$(CONFIG_TARGET_CONTROLCENTERDC) += hydra.o ihs_phys.o endif diff --git a/board/gdsys/a38x/controlcenterdc.c b/board/gdsys/a38x/controlcenterdc.c index 4abb3e45128..659dfddecea 100644 --- a/board/gdsys/a38x/controlcenterdc.c +++ b/board/gdsys/a38x/controlcenterdc.c @@ -84,7 +84,7 @@ int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
void spl_board_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD uint k; struct gpio_desc gpio = {};
@@ -139,7 +139,7 @@ struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
int board_early_init_f(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Configure MPP */ writel(0x00111111, MVEBU_MPP_BASE + 0x00); writel(0x40040000, MVEBU_MPP_BASE + 0x04); @@ -174,7 +174,7 @@ int board_init(void) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD void init_host_phys(struct mii_dev *bus) { uint k; @@ -241,7 +241,7 @@ int ccdc_eth_init(void)
int board_late_init(void) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD hydra_initialize(); #endif return 0; @@ -272,13 +272,13 @@ int board_fix_fdt(void *rw_fdt_blob) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int last_stage_init(void) { struct udevice *tpm; int ret;
- if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return 0; ccdc_eth_init();
diff --git a/board/ge/b1x5v2/b1x5v2.c b/board/ge/b1x5v2/b1x5v2.c index 031773bc5ef..c1aacd1458b 100644 --- a/board/ge/b1x5v2/b1x5v2.c +++ b/board/ge/b1x5v2/b1x5v2.c @@ -35,7 +35,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#define B1X5V2_GE_VPD_OFFSET 0x0100000 #define B1X5V2_GE_VPD_SIZE 1022 @@ -695,4 +695,4 @@ U_BOOT_CMD( "" );
-#endif // CONFIG_SPL_BUILD +#endif // CONFIG_XPL_BUILD diff --git a/board/ge/b1x5v2/spl.c b/board/ge/b1x5v2/spl.c index 460d3be1d83..b6f23345acd 100644 --- a/board/ge/b1x5v2/spl.c +++ b/board/ge/b1x5v2/spl.c @@ -20,7 +20,7 @@ #include <spi_flash.h> #include <spl.h>
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD)
#include <asm/arch/mx6-ddr.h>
diff --git a/board/google/chromebook_coral/coral.c b/board/google/chromebook_coral/coral.c index 7b2724c01d0..3443dc91885 100644 --- a/board/google/chromebook_coral/coral.c +++ b/board/google/chromebook_coral/coral.c @@ -147,7 +147,7 @@ static int coral_get_str(struct udevice *dev, int id, size_t size, char *val) { int ret;
- if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return -ENOSYS;
switch (id) { diff --git a/board/google/gru/gru.c b/board/google/gru/gru.c index e08cb42c27e..f3a1a19f2b6 100644 --- a/board/google/gru/gru.c +++ b/board/google/gru/gru.c @@ -7,7 +7,7 @@ #include <init.h> #include <asm/arch-rockchip/clock.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* provided to defeat compiler optimisation in board_init_f() */ void gru_dummy_function(int i) { @@ -33,7 +33,7 @@ int board_early_init_f(void) } #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int board_early_init_r(void) { struct udevice *clk; diff --git a/board/google/imx8mq_phanbell/Makefile b/board/google/imx8mq_phanbell/Makefile index d6427cf8e90..ac6418e49a7 100644 --- a/board/google/imx8mq_phanbell/Makefile +++ b/board/google/imx8mq_phanbell/Makefile @@ -5,7 +5,7 @@
obj-y += imx8mq_phanbell.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing_1g.o endif diff --git a/board/google/veyron/veyron.c b/board/google/veyron/veyron.c index bd8ce633772..7057b76e290 100644 --- a/board/google/veyron/veyron.c +++ b/board/google/veyron/veyron.c @@ -19,7 +19,7 @@ * There is a U-Boot driver for this but it may need to add support for the * 'voltage-table' property. */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if !CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) static int veyron_init(void) { diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c index e0eb8aa9f2b..d5491d5076f 100644 --- a/board/grinn/chiliboard/board.c +++ b/board/grinn/chiliboard/board.c @@ -104,7 +104,7 @@ int board_init(void) #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo;
diff --git a/board/grinn/liteboard/board.c b/board/grinn/liteboard/board.c index 07bb5b7d797..c2a44b4aa2d 100644 --- a/board/grinn/liteboard/board.c +++ b/board/grinn/liteboard/board.c @@ -229,7 +229,7 @@ int checkboard(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_boot_order(u32 *spl_boot_list) { struct src *psrc = (struct src *)SRC_BASE_ADDR; diff --git a/board/htc/endeavoru/Makefile b/board/htc/endeavoru/Makefile index 0c6ba4af3b1..57f84d6ea98 100644 --- a/board/htc/endeavoru/Makefile +++ b/board/htc/endeavoru/Makefile @@ -6,6 +6,6 @@ # (C) Copyright 2021 # Svyatoslav Ryhel clamor95@gmail.com
-obj-$(CONFIG_SPL_BUILD) += endeavoru-spl.o +obj-$(CONFIG_XPL_BUILD) += endeavoru-spl.o
obj-y += endeavoru.o diff --git a/board/imgtec/ci20/ci20.c b/board/imgtec/ci20/ci20.c index 4e268381d3c..3e9833d684f 100644 --- a/board/imgtec/ci20/ci20.c +++ b/board/imgtec/ci20/ci20.c @@ -39,7 +39,7 @@ static void ci20_mux_mmc(void) jz4780_clk_ungate_mmc(); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
static void ci20_mux_eth(void) { @@ -251,7 +251,7 @@ int checkboard(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
#if defined(CONFIG_SPL_MMC) int board_mmc_init(struct bd_info *bd) diff --git a/board/isee/igep003x/Makefile b/board/isee/igep003x/Makefile index c3e39745252..02ec0ccbdb2 100644 --- a/board/isee/igep003x/Makefile +++ b/board/isee/igep003x/Makefile @@ -4,7 +4,7 @@ # # Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += mux.o endif
diff --git a/board/isee/igep003x/board.c b/board/isee/igep003x/board.c index 7cd26ce3c34..162467c803a 100644 --- a/board/isee/igep003x/board.c +++ b/board/isee/igep003x/board.c @@ -68,7 +68,7 @@ static int get_board_revision(void) return revision; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* PN H5TQ4G63AFR is equivalent to MT41K256M16HA125*/ static const struct ddr_data ddr3_igep0034_data = { .datardsratio0 = MT41K256M16HA125E_RD_DQS, diff --git a/board/isee/igep00x0/Makefile b/board/isee/igep00x0/Makefile index e095bcada29..527748cdadd 100644 --- a/board/isee/igep00x0/Makefile +++ b/board/isee/igep00x0/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := spl.o common.o else obj-y := igep00x0.o common.o diff --git a/board/k+p/kp_imx6q_tpc/Makefile b/board/k+p/kp_imx6q_tpc/Makefile index 6551b2bfa2d..6444628c649 100644 --- a/board/k+p/kp_imx6q_tpc/Makefile +++ b/board/k+p/kp_imx6q_tpc/Makefile @@ -2,7 +2,7 @@ # # Copyright (C) 2018 Lukasz Majewski lukma@denx.de
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := kp_imx6q_tpc_spl.o else obj-y := kp_imx6q_tpc.o diff --git a/board/kontron/pitx_imx8m/Makefile b/board/kontron/pitx_imx8m/Makefile index 6ebe5d07709..50ca56f4efd 100644 --- a/board/kontron/pitx_imx8m/Makefile +++ b/board/kontron/pitx_imx8m/Makefile @@ -2,7 +2,7 @@
obj-y += pitx_imx8m.o pitx_misc.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o pitx_misc.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing_2gb.o lpddr4_timing_4gb.o endif diff --git a/board/kontron/sl-mx6ul/Makefile b/board/kontron/sl-mx6ul/Makefile index 6af5f65450a..dfed1991ee7 100644 --- a/board/kontron/sl-mx6ul/Makefile +++ b/board/kontron/sl-mx6ul/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ # (C) Copyright 2018 Kontron Electronics GmbH
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := spl.o else obj-y := sl-mx6ul.o diff --git a/board/kontron/sl-mx8mm/Makefile b/board/kontron/sl-mx8mm/Makefile index fceed684ede..b47fafc5733 100644 --- a/board/kontron/sl-mx8mm/Makefile +++ b/board/kontron/sl-mx8mm/Makefile @@ -3,7 +3,7 @@
obj-y := sl-mx8mm.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/kontron/sl28/Makefile b/board/kontron/sl28/Makefile index 084c11da376..2cb41251708 100644 --- a/board/kontron/sl28/Makefile +++ b/board/kontron/sl28/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += sl28.o cmds.o endif
@@ -8,7 +8,7 @@ obj-y += common.o ddr.o
obj-$(CONFIG_ARMV8_PSCI) += psci.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_SPL_ATF) += spl_atf.o endif diff --git a/board/kontron/sl28/ddr.c b/board/kontron/sl28/ddr.c index 9b881fdc265..1f1a6aa1b16 100644 --- a/board/kontron/sl28/ddr.c +++ b/board/kontron/sl28/ddr.c @@ -98,7 +98,7 @@ int fsl_initdram(void) break; }
- if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_XPL_BUILD)) fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
gd->ram_size = dram_size; diff --git a/board/kosagi/novena/Makefile b/board/kosagi/novena/Makefile index 64d32f5a963..fdcd8b5f422 100644 --- a/board/kosagi/novena/Makefile +++ b/board/kosagi/novena/Makefile @@ -2,7 +2,7 @@ # # Copyright (C) 2014 Marek Vasut marex@denx.de
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := novena_spl.o else obj-y := novena.o diff --git a/board/lenovo/ideapad-yoga-11/Makefile b/board/lenovo/ideapad-yoga-11/Makefile index 186f1cb4ee5..fd9736d1bf1 100644 --- a/board/lenovo/ideapad-yoga-11/Makefile +++ b/board/lenovo/ideapad-yoga-11/Makefile @@ -3,4 +3,4 @@ # (C) Copyright 2022 # Open Surface RT
-obj-$(CONFIG_SPL_BUILD) += ideapad-yoga-11-spl.o +obj-$(CONFIG_XPL_BUILD) += ideapad-yoga-11-spl.o diff --git a/board/lg/sniper/sniper.c b/board/lg/sniper/sniper.c index 9d0959f294e..d4db32ee69b 100644 --- a/board/lg/sniper/sniper.c +++ b/board/lg/sniper/sniper.c @@ -54,7 +54,7 @@ void set_muxconf_regs(void) MUX_SNIPER(); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void get_board_mem_timings(struct board_sdrc_timings *timings) { timings->mcfg = HYNIX_V_MCFG_200(256 << 20); diff --git a/board/lg/x3-t30/Makefile b/board/lg/x3-t30/Makefile index 3eeb132f3c6..fb2527f9ee8 100644 --- a/board/lg/x3-t30/Makefile +++ b/board/lg/x3-t30/Makefile @@ -6,6 +6,6 @@ # (C) Copyright 2021 # Svyatoslav Ryhel clamor95@gmail.com
-obj-$(CONFIG_SPL_BUILD) += x3-t30-spl.o +obj-$(CONFIG_XPL_BUILD) += x3-t30-spl.o
obj-y += x3-t30.o diff --git a/board/liebherr/display5/Makefile b/board/liebherr/display5/Makefile index ee503add75d..c62583a9806 100644 --- a/board/liebherr/display5/Makefile +++ b/board/liebherr/display5/Makefile @@ -4,7 +4,7 @@ # # SPDX-License-Identifier: GPL-2.0+ # -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y = spl.o else obj-y := display5.o diff --git a/board/liebherr/mccmon6/Makefile b/board/liebherr/mccmon6/Makefile index 3c9786c6b7d..d5fdc2011b0 100644 --- a/board/liebherr/mccmon6/Makefile +++ b/board/liebherr/mccmon6/Makefile @@ -2,7 +2,7 @@ # # (C) Copyright 2016-2017 # Lukasz Majewski, DENX Software Engineering, lukma@denx.de -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := spl.o else obj-y := mccmon6.o diff --git a/board/liebherr/xea/Makefile b/board/liebherr/xea/Makefile index abf500857f6..6efa07ca004 100644 --- a/board/liebherr/xea/Makefile +++ b/board/liebherr/xea/Makefile @@ -7,6 +7,6 @@
obj-y := xea.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl_xea.o endif diff --git a/board/liebherr/xea/xea.c b/board/liebherr/xea/xea.c index 9ade3563b25..1d4f165fd13 100644 --- a/board/liebherr/xea/xea.c +++ b/board/liebherr/xea/xea.c @@ -37,7 +37,7 @@ #include <spi.h> #include <spi_flash.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <spl.h> #endif
@@ -62,7 +62,7 @@ static void init_clocks(void) mxs_set_sspclk(MXC_SSPCLK3, 96000, 0); }
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_FRAMEWORK) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_FRAMEWORK) void board_init_f(ulong arg) { init_clocks(); @@ -355,4 +355,4 @@ U_BOOT_DRIVER(fsl_imx28_clkctrl) = { .id = UCLASS_CLK, .of_match = imx28_clk_ids, }; -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c index e6ca31016b7..e4f619d0942 100644 --- a/board/logicpd/am3517evm/am3517evm.c +++ b/board/logicpd/am3517evm/am3517evm.c @@ -39,7 +39,7 @@ DECLARE_GLOBAL_DATA_PTR; #define CPGMACSS_SW_RST (1 << 1) #define PHY_GPIO 30
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #if defined(CONFIG_SPL_OS_BOOT) int spl_start_uboot(void) { diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c index 589136fd64a..652994df616 100644 --- a/board/logicpd/imx6/imx6logic.c +++ b/board/logicpd/imx6/imx6logic.c @@ -135,7 +135,7 @@ int board_late_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <asm/arch/mx6-ddr.h> #include <asm/arch/mx6q-ddr.h> #include <spl.h> diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c index a9fe61918b6..352b519b451 100644 --- a/board/logicpd/omap3som/omap3logic.c +++ b/board/logicpd/omap3som/omap3logic.c @@ -68,7 +68,7 @@ int spl_start_uboot(void) } #endif
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) /* * Routine: get_board_mem_timings * Description: If we use SPL then there is no x-loader nor config header diff --git a/board/menlo/m53menlo/m53menlo.c b/board/menlo/m53menlo/m53menlo.c index 79351f47273..fc76d5765fa 100644 --- a/board/menlo/m53menlo/m53menlo.c +++ b/board/menlo/m53menlo/m53menlo.c @@ -524,7 +524,7 @@ int checkboard(void) /* * NAND SPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_board_init(void) { setup_iomux_nand(); diff --git a/board/menlo/mx8menlo/Makefile b/board/menlo/mx8menlo/Makefile index fd5ec826336..62939395ba1 100644 --- a/board/menlo/mx8menlo/Makefile +++ b/board/menlo/mx8menlo/Makefile @@ -9,13 +9,13 @@ obj-y := mx8menlo.o
obj-y += ../../toradex/verdin-imx8mm/verdin-imx8mm.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += ../../toradex/verdin-imx8mm/spl.o obj-$(CONFIG_IMX8M_LPDDR4) += ../../toradex/verdin-imx8mm/lpddr4_timing.o endif
# Common for all Toradex modules -ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) # Necessary to create built-in.o obj- := __dummy__.o else diff --git a/board/microsoft/surface-rt/Makefile b/board/microsoft/surface-rt/Makefile index da4094a7df3..feda1dba3bd 100644 --- a/board/microsoft/surface-rt/Makefile +++ b/board/microsoft/surface-rt/Makefile @@ -3,4 +3,4 @@ # (C) Copyright 2021 # Open Surface RT
-obj-$(CONFIG_SPL_BUILD) += surface-rt-spl.o +obj-$(CONFIG_XPL_BUILD) += surface-rt-spl.o diff --git a/board/mntre/imx8mq_reform2/Makefile b/board/mntre/imx8mq_reform2/Makefile index 2efd56bb4ad..2772c8dc717 100644 --- a/board/mntre/imx8mq_reform2/Makefile +++ b/board/mntre/imx8mq_reform2/Makefile @@ -6,7 +6,7 @@
obj-y += imx8mq_reform2.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/msc/sm2s_imx8mp/Makefile b/board/msc/sm2s_imx8mp/Makefile index 7908a0ceb04..48dc885b8f6 100644 --- a/board/msc/sm2s_imx8mp/Makefile +++ b/board/msc/sm2s_imx8mp/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0 #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o lpddr4_timing.o else obj-y += sm2s_imx8mp.o diff --git a/board/myir/mys_6ulx/Makefile b/board/myir/mys_6ulx/Makefile index 3c63e439aba..9b76595701e 100644 --- a/board/myir/mys_6ulx/Makefile +++ b/board/myir/mys_6ulx/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+
obj-y := mys_6ulx.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/board/nvidia/beaver/Makefile b/board/nvidia/beaver/Makefile index 5e9e70825c7..d56c7151af6 100644 --- a/board/nvidia/beaver/Makefile +++ b/board/nvidia/beaver/Makefile @@ -2,6 +2,6 @@ # # Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
-obj-$(CONFIG_SPL_BUILD) += beaver-spl.o +obj-$(CONFIG_XPL_BUILD) += beaver-spl.o
obj-y = ../cardhu/cardhu.o diff --git a/board/nvidia/cardhu/Makefile b/board/nvidia/cardhu/Makefile index 6f480cdfd3b..85d88295c08 100644 --- a/board/nvidia/cardhu/Makefile +++ b/board/nvidia/cardhu/Makefile @@ -3,6 +3,6 @@ # (C) Copyright 2010-2012 # NVIDIA Corporation <www.nvidia.com>
-obj-$(CONFIG_SPL_BUILD) += cardhu-spl.o +obj-$(CONFIG_XPL_BUILD) += cardhu-spl.o
obj-y += cardhu.o diff --git a/board/olimex/mx23_olinuxino/Makefile b/board/olimex/mx23_olinuxino/Makefile index b2ea8974344..0a6beb10ded 100644 --- a/board/olimex/mx23_olinuxino/Makefile +++ b/board/olimex/mx23_olinuxino/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y := mx23_olinuxino.o else obj-y := spl_boot.o diff --git a/board/opalkelly/zynq/Makefile b/board/opalkelly/zynq/Makefile index 19e893e43d7..8a2375a1068 100644 --- a/board/opalkelly/zynq/Makefile +++ b/board/opalkelly/zynq/Makefile @@ -4,4 +4,4 @@ obj-y := board.o
hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE))
-obj-$(CONFIG_SPL_BUILD) += $(hw-platform-y)/ps7_init_gpl.o +obj-$(CONFIG_XPL_BUILD) += $(hw-platform-y)/ps7_init_gpl.o diff --git a/board/phytec/common/Makefile b/board/phytec/common/Makefile index 04469d0a924..cd78f7686fe 100644 --- a/board/phytec/common/Makefile +++ b/board/phytec/common/Makefile @@ -2,7 +2,7 @@ # Copyright (C) 2023 PHYTEC Messtechnik GmbH # Author: Teresa Remmet t.remmet@phytec.de
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD # necessary to create built-in.o obj- := __dummy__.o endif diff --git a/board/phytec/pcl063/Makefile b/board/phytec/pcl063/Makefile index 53c73c9b082..0f17eb466c5 100644 --- a/board/phytec/pcl063/Makefile +++ b/board/phytec/pcl063/Makefile @@ -4,4 +4,4 @@ #
obj-y := pcl063.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/board/phytec/pcm058/pcm058.c b/board/phytec/pcm058/pcm058.c index ecc5b75d8d4..4a95376b359 100644 --- a/board/phytec/pcm058/pcm058.c +++ b/board/phytec/pcm058/pcm058.c @@ -108,7 +108,7 @@ int board_late_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <spl.h> #include <linux/libfdt.h>
diff --git a/board/phytec/phycore_am335x_r2/Makefile b/board/phytec/phycore_am335x_r2/Makefile index 16ac38fd8be..4f865ab9e10 100644 --- a/board/phytec/phycore_am335x_r2/Makefile +++ b/board/phytec/phycore_am335x_r2/Makefile @@ -4,7 +4,7 @@ # # Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += mux.o endif
diff --git a/board/phytec/phycore_am335x_r2/board.c b/board/phytec/phycore_am335x_r2/board.c index 2022525651d..a2a488a0e30 100644 --- a/board/phytec/phycore_am335x_r2/board.c +++ b/board/phytec/phycore_am335x_r2/board.c @@ -26,7 +26,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
diff --git a/board/phytec/phycore_am62x/phycore-am62x.c b/board/phytec/phycore_am62x/phycore-am62x.c index 9f6bc736cbb..a0e098e010e 100644 --- a/board/phytec/phycore_am62x/phycore-am62x.c +++ b/board/phytec/phycore_am62x/phycore-am62x.c @@ -182,7 +182,7 @@ int do_board_detect(void) } #endif
-#if IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) void spl_perform_fixups(struct spl_image_info *spl_image) { u64 start[CONFIG_NR_DRAM_BANKS]; diff --git a/board/phytec/phycore_imx8mm/Makefile b/board/phytec/phycore_imx8mm/Makefile index 27f6c027b6c..2fb59761fc9 100644 --- a/board/phytec/phycore_imx8mm/Makefile +++ b/board/phytec/phycore_imx8mm/Makefile @@ -5,7 +5,7 @@
obj-y += phycore-imx8mm.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/phytec/phycore_imx8mp/Makefile b/board/phytec/phycore_imx8mp/Makefile index c4c434c9475..8cf1f4dcea3 100644 --- a/board/phytec/phycore_imx8mp/Makefile +++ b/board/phytec/phycore_imx8mp/Makefile @@ -5,7 +5,7 @@
obj-y += phycore-imx8mp.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/phytec/phycore_imx93/Makefile b/board/phytec/phycore_imx93/Makefile index ce35326a156..dd5085e160f 100644 --- a/board/phytec/phycore_imx93/Makefile +++ b/board/phytec/phycore_imx93/Makefile @@ -9,6 +9,6 @@
obj-y += phycore-imx93.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o lpddr4_timing.o endif diff --git a/board/polyhex/imx8mp_debix_model_a/Makefile b/board/polyhex/imx8mp_debix_model_a/Makefile index e5cdc850878..3d50c7af4af 100644 --- a/board/polyhex/imx8mp_debix_model_a/Makefile +++ b/board/polyhex/imx8mp_debix_model_a/Makefile @@ -7,7 +7,7 @@
obj-y += imx8mp_debix_model_a.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/purism/librem5/Makefile b/board/purism/librem5/Makefile index 47f25f047b7..4514add3a5b 100644 --- a/board/purism/librem5/Makefile +++ b/board/purism/librem5/Makefile @@ -7,7 +7,7 @@
obj-y += librem5.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o lpddr4_timing_b0.o endif diff --git a/board/purism/librem5/librem5.h b/board/purism/librem5/librem5.h index 0d24edea9b1..69475a5b063 100644 --- a/board/purism/librem5/librem5.h +++ b/board/purism/librem5/librem5.h @@ -57,7 +57,7 @@ /* Could be ASPEN, BIRCH or CHESTNUT. assume CHESTNUT */ #define BOARD_REV_UNKNOWN BOARD_REV_CHESTNUT
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static const iomux_v3_cfg_t configure_pads[] = { IMX8MQ_PAD_GPIO1_IO00__GPIO1_IO0 | MUX_PAD_CTRL(PAD_CTL_DSE6), IMX8MQ_PAD_GPIO1_IO03__GPIO1_IO3 | MUX_PAD_CTRL(PAD_CTL_DSE6) | MUX_MODE_SION, @@ -151,7 +151,7 @@ static inline void init_pinmux(void) gpio_direction_output(AUDIO_EN, 1); gpio_direction_output(DSI_EN, 1); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#define USB1_BASE_ADDR 0x38100000 #define USB2_BASE_ADDR 0x38200000 diff --git a/board/radxa/rockpi4-rk3399/rockpi4-rk3399.c b/board/radxa/rockpi4-rk3399/rockpi4-rk3399.c index a533128b92f..fd827467b30 100644 --- a/board/radxa/rockpi4-rk3399/rockpi4-rk3399.c +++ b/board/radxa/rockpi4-rk3399/rockpi4-rk3399.c @@ -18,7 +18,7 @@ struct efi_capsule_update_info update_info = {
#endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) && IS_ENABLED(CONFIG_EFI_PARTITION) static bool board_is_rockpi_4b(void) { @@ -55,4 +55,4 @@ void rockchip_capsule_update_board_setup(void) } } #endif /* CONFIG_EFI_HAVE_CAPSULE_SUPPORT && CONFIG_EFI_PARTITION */ -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/board/renesas/alt/Makefile b/board/renesas/alt/Makefile index 53418699b27..f9c131fc6cd 100644 --- a/board/renesas/alt/Makefile +++ b/board/renesas/alt/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0 #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := alt_spl.o else obj-y := alt.o qos.o diff --git a/board/renesas/condor/Makefile b/board/renesas/condor/Makefile index 19e6038430b..cb965cde35f 100644 --- a/board/renesas/condor/Makefile +++ b/board/renesas/condor/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := ../rcar-common/gen3-spl.o else obj-y := ../rcar-common/common.o diff --git a/board/renesas/draak/Makefile b/board/renesas/draak/Makefile index 1fc90d1dab4..8859cf902ca 100644 --- a/board/renesas/draak/Makefile +++ b/board/renesas/draak/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := ../rcar-common/gen3-spl.o else obj-y := draak.o ../rcar-common/common.o diff --git a/board/renesas/eagle/Makefile b/board/renesas/eagle/Makefile index 9fb6a7c0f0a..98164b5ea29 100644 --- a/board/renesas/eagle/Makefile +++ b/board/renesas/eagle/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := ../rcar-common/gen3-spl.o else obj-y := ../rcar-common/v3-common.o ../rcar-common/common.o diff --git a/board/renesas/ebisu/Makefile b/board/renesas/ebisu/Makefile index 956ce8a90fa..283d3a4ae36 100644 --- a/board/renesas/ebisu/Makefile +++ b/board/renesas/ebisu/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := ../rcar-common/gen3-spl.o else obj-y := ../rcar-common/common.o diff --git a/board/renesas/falcon/Makefile b/board/renesas/falcon/Makefile index 3b202c24fb1..2e240d3bad6 100644 --- a/board/renesas/falcon/Makefile +++ b/board/renesas/falcon/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := ../rcar-common/gen3-spl.o else obj-y := falcon.o ../rcar-common/common.o diff --git a/board/renesas/gose/Makefile b/board/renesas/gose/Makefile index c6a1dc21cda..2c45bd74014 100644 --- a/board/renesas/gose/Makefile +++ b/board/renesas/gose/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0 #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := gose_spl.o else obj-y := gose.o qos.o diff --git a/board/renesas/koelsch/Makefile b/board/renesas/koelsch/Makefile index 77cf067406c..1b0818fa7ec 100644 --- a/board/renesas/koelsch/Makefile +++ b/board/renesas/koelsch/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0 #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := koelsch_spl.o else obj-y := koelsch.o qos.o diff --git a/board/renesas/lager/Makefile b/board/renesas/lager/Makefile index 379368fdfce..77e380f9335 100644 --- a/board/renesas/lager/Makefile +++ b/board/renesas/lager/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0 #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := lager_spl.o else obj-y := lager.o qos.o diff --git a/board/renesas/porter/Makefile b/board/renesas/porter/Makefile index c237ee5ec77..9f22044bc79 100644 --- a/board/renesas/porter/Makefile +++ b/board/renesas/porter/Makefile @@ -7,7 +7,7 @@ # SPDX-License-Identifier: GPL-2.0 #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := porter_spl.o else obj-y := porter.o qos.o diff --git a/board/renesas/salvator-x/Makefile b/board/renesas/salvator-x/Makefile index 95258079e40..0fc69ba9de6 100644 --- a/board/renesas/salvator-x/Makefile +++ b/board/renesas/salvator-x/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := ../rcar-common/gen3-spl.o else obj-y := salvator-x.o ../rcar-common/common.o diff --git a/board/renesas/silk/Makefile b/board/renesas/silk/Makefile index b5c3ad8d934..48dd7dbb8be 100644 --- a/board/renesas/silk/Makefile +++ b/board/renesas/silk/Makefile @@ -7,7 +7,7 @@ # SPDX-License-Identifier: GPL-2.0 #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := silk_spl.o else obj-y := silk.o qos.o diff --git a/board/renesas/stout/Makefile b/board/renesas/stout/Makefile index b8875bb7b98..e1bca5339b9 100644 --- a/board/renesas/stout/Makefile +++ b/board/renesas/stout/Makefile @@ -8,7 +8,7 @@ # SPDX-License-Identifier: GPL-2.0 #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := stout_spl.o else obj-y := stout.o cpld.o qos.o diff --git a/board/renesas/ulcb/Makefile b/board/renesas/ulcb/Makefile index f4d24c68a67..ec2f161feae 100644 --- a/board/renesas/ulcb/Makefile +++ b/board/renesas/ulcb/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := ../rcar-common/gen3-spl.o else obj-y := ulcb.o cpld.o ../rcar-common/common.o diff --git a/board/renesas/v3hsk/Makefile b/board/renesas/v3hsk/Makefile index a9d597edd58..b29114c7239 100644 --- a/board/renesas/v3hsk/Makefile +++ b/board/renesas/v3hsk/Makefile @@ -7,7 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := ../rcar-common/gen3-spl.o else obj-y := ../rcar-common/v3-common.o ../rcar-common/common.o diff --git a/board/renesas/v3msk/Makefile b/board/renesas/v3msk/Makefile index ec493e572f1..f8c4bcdcf9f 100644 --- a/board/renesas/v3msk/Makefile +++ b/board/renesas/v3msk/Makefile @@ -7,7 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := ../rcar-common/gen3-spl.o else obj-y := ../rcar-common/v3-common.o ../rcar-common/common.o diff --git a/board/ronetix/imx7-cm/Makefile b/board/ronetix/imx7-cm/Makefile index 7e08f238a0d..1ca6332852f 100644 --- a/board/ronetix/imx7-cm/Makefile +++ b/board/ronetix/imx7-cm/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ # (C) Copyright 2017 NXP Semiconductors
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-y += imx7-cm.o diff --git a/board/ronetix/imx8mq-cm/Makefile b/board/ronetix/imx8mq-cm/Makefile index 0d9d8e646db..4ca2a96d81e 100644 --- a/board/ronetix/imx8mq-cm/Makefile +++ b/board/ronetix/imx8mq-cm/Makefile @@ -6,7 +6,7 @@
obj-y += imx8mq_cm.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile index d31b81abf1e..abecef8be11 100644 --- a/board/samsung/common/Makefile +++ b/board/samsung/common/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_USB_GADGET_DOWNLOAD) += gadget.o obj-$(CONFIG_MISC_COMMON) += misc.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_BOARD_COMMON) += board.o sromc.o ifdef CONFIG_EXYNOS5_DT obj-y += exynos5-dt.o diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile index 44691af09f4..940f689a601 100644 --- a/board/samsung/origen/Makefile +++ b/board/samsung/origen/Makefile @@ -2,7 +2,7 @@ # # Copyright (C) 2011 Samsung Electronics
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD # necessary to create built-in.o obj- := __dummy__.o
diff --git a/board/samsung/smdkv310/Makefile b/board/samsung/smdkv310/Makefile index fccd8ffd2c1..b7f9d5a254c 100644 --- a/board/samsung/smdkv310/Makefile +++ b/board/samsung/smdkv310/Makefile @@ -2,7 +2,7 @@ # # Copyright (C) 2011 Samsung Electronics
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD # necessary to create built-in.o obj- := __dummy__.o
diff --git a/board/seeed/npi_imx6ull/Makefile b/board/seeed/npi_imx6ull/Makefile index 93ea413517d..bd8f83148bb 100644 --- a/board/seeed/npi_imx6ull/Makefile +++ b/board/seeed/npi_imx6ull/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+
obj-y := npi_imx6ull.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/board/sielaff/imx6dl-sielaff/Makefile b/board/sielaff/imx6dl-sielaff/Makefile index 65cecfe6f6c..9c8bab662e4 100644 --- a/board/sielaff/imx6dl-sielaff/Makefile +++ b/board/sielaff/imx6dl-sielaff/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ # (C) Copyright 2022 Kontron Electronics GmbH
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := spl.o else obj-y := imx6dl-sielaff.o diff --git a/board/siemens/capricorn/Makefile b/board/siemens/capricorn/Makefile index 4dafac10829..e8a24c448b9 100644 --- a/board/siemens/capricorn/Makefile +++ b/board/siemens/capricorn/Makefile @@ -6,7 +6,7 @@ obj-y += board.o obj-y += ../common/eeprom.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-y += ../common/factoryset.o diff --git a/board/siemens/capricorn/board.c b/board/siemens/capricorn/board.c index 53dac8bfe1b..ad474d9baa0 100644 --- a/board/siemens/capricorn/board.c +++ b/board/siemens/capricorn/board.c @@ -235,7 +235,7 @@ void reset_cpu(void) { }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* LED's */ static int board_led_init(void) { @@ -265,7 +265,7 @@ static int board_led_init(void) mdelay(1); return ret; } -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */
int checkboard(void) { @@ -335,7 +335,7 @@ void board_late_mmc_env_init(void) run_command(cmd, 0); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int load_parameters_from_factoryset(void) { int ret; @@ -443,4 +443,4 @@ U_BOOT_CMD( "Reset eth phy", "[print]" ); -#endif /* ! CONFIG_SPL_BUILD */ +#endif /* ! CONFIG_XPL_BUILD */ diff --git a/board/siemens/common/board_am335x.c b/board/siemens/common/board_am335x.c index e6537b0675a..daf0bb930ec 100644 --- a/board/siemens/common/board_am335x.c +++ b/board/siemens/common/board_am335x.c @@ -22,7 +22,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void set_uart_mux_conf(void) { enable_uart0_pin_mux(); @@ -52,9 +52,9 @@ void sdram_init(void)
return; } -#endif /* #ifdef CONFIG_SPL_BUILD */ +#endif /* #ifdef CONFIG_XPL_BUILD */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Basic board specific setup. Pinmux has been handled already. */ @@ -78,7 +78,7 @@ int board_init(void)
return 0; } -#endif /* #ifndef CONFIG_SPL_BUILD */ +#endif /* #ifndef CONFIG_XPL_BUILD */
#define OSC (V_OSCK/1000000) const struct dpll_params dpll_ddr = { @@ -89,7 +89,7 @@ const struct dpll_params *get_dpll_ddr_params(void) return &dpll_ddr; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#define MAX_NR_LEDS 10 #define MAX_PIN_NUMBER 128 @@ -247,4 +247,4 @@ U_BOOT_CMD( "Set LEDs defined in environment", "<0|1>" ); -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/board/siemens/common/board_am335x.h b/board/siemens/common/board_am335x.h index 3a20352d457..4c9d5b04f12 100644 --- a/board/siemens/common/board_am335x.h +++ b/board/siemens/common/board_am335x.h @@ -22,7 +22,7 @@ void spl_draco_board_init(void); void draco_init_ddr(void); int draco_read_eeprom(void);
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Mux for init: uart?, i2c0 to read the main EEPROM */ void enable_uart0_pin_mux(void); void enable_uart1_pin_mux(void); @@ -34,6 +34,6 @@ void enable_i2c0_pin_mux(void);
/* Main mux function to enable other pinmux required on the board */ void enable_board_pin_mux(void); -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#endif /* _BOARD_AM335X_H_ */ diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c index a250ccfe252..8261b3d37cc 100644 --- a/board/siemens/common/factoryset.c +++ b/board/siemens/common/factoryset.c @@ -5,7 +5,7 @@ * (C) Copyright 2013 Siemens Schweiz AG */
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD)
#include <env.h> #include <g_dnl.h> @@ -350,4 +350,4 @@ int g_dnl_get_board_bcd_device_number(int gcnum) { return factory_dat.version; } -#endif /* defined(CONFIG_SPL_BUILD) */ +#endif /* defined(CONFIG_XPL_BUILD) */ diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c index cd27fc1cc37..a8714e055d7 100644 --- a/board/siemens/corvus/board.c +++ b/board/siemens/corvus/board.c @@ -114,7 +114,7 @@ static void corvus_nand_hw_init(void) at91_set_gpio_input(CFG_SYS_NAND_READY_PIN, 1); }
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #include <spl.h> #include <nand.h>
diff --git a/board/siemens/draco/Makefile b/board/siemens/draco/Makefile index aae536472c5..ac59c5bd985 100644 --- a/board/siemens/draco/Makefile +++ b/board/siemens/draco/Makefile @@ -9,13 +9,13 @@ # u-boot:/board/ti/am335x/Makefile # Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := mux.o endif
obj-y += board.o obj-y += ../common/board_am335x.o obj-y += ../common/eeprom.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += ../common/factoryset.o endif diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c index fc3eb06ccf2..147f827673b 100644 --- a/board/siemens/draco/board.c +++ b/board/siemens/draco/board.c @@ -28,7 +28,7 @@ #include "../common/eeprom.h" #include "../common/factoryset.h"
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static struct draco_baseboard_id __section(".data") settings;
#if DDR_PLL_FREQ == 303 @@ -106,7 +106,7 @@ static void print_chip_data(void) printf("hw version: \t'%s'\n", settings.chip.shwver); printf("max freq: \t%d MHz\n", dpll_mpu_opp100.m); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#define AM335X_NAND_ECC_MASK 0x0f #define AM335X_NAND_ECC_TYPE_16 0x02 @@ -142,7 +142,7 @@ static int draco_read_nand_geometry(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * Read header information from EEPROM into global structure. */ @@ -233,7 +233,7 @@ void spl_draco_board_init(void) { return; } -#endif /* if def CONFIG_SPL_BUILD */ +#endif /* if def CONFIG_XPL_BUILD */
#ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) @@ -266,8 +266,8 @@ int board_late_init(void) } #endif
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_XPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH) && defined(CONFIG_XPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -343,4 +343,4 @@ U_BOOT_CMD( "" ); #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ -#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ +#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_XPL_BUILD)) */ diff --git a/board/siemens/pxm2/Makefile b/board/siemens/pxm2/Makefile index aae536472c5..ac59c5bd985 100644 --- a/board/siemens/pxm2/Makefile +++ b/board/siemens/pxm2/Makefile @@ -9,13 +9,13 @@ # u-boot:/board/ti/am335x/Makefile # Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := mux.o endif
obj-y += board.o obj-y += ../common/board_am335x.o obj-y += ../common/eeprom.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += ../common/factoryset.o endif diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 888c7c09baf..4f9611372cd 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -28,7 +28,7 @@ #include "../common/eeprom.h" #include "../common/factoryset.h"
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void draco_init_ddr(void) { struct emif_regs pxm2_ddr3_emif_reg_data = { @@ -154,10 +154,10 @@ int draco_read_eeprom(void)
return 0; } -#endif /* if def CONFIG_SPL_BUILD */ +#endif /* if def CONFIG_XPL_BUILD */
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_XPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH) && defined(CONFIG_XPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -198,15 +198,15 @@ static struct cpsw_platform_data cpsw_data = { .host_port_num = 0, .version = CPSW_CTRL_VERSION_2, }; -#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ +#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_XPL_BUILD)) */
#if defined(CONFIG_DRIVER_TI_CPSW) || \ (defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) int board_eth_init(struct bd_info *bis) { int n = 0; -#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_XPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH) && defined(CONFIG_XPL_BUILD)) struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; #ifdef CONFIG_FACTORYSET int rv; diff --git a/board/siemens/rut/Makefile b/board/siemens/rut/Makefile index aae536472c5..ac59c5bd985 100644 --- a/board/siemens/rut/Makefile +++ b/board/siemens/rut/Makefile @@ -9,13 +9,13 @@ # u-boot:/board/ti/am335x/Makefile # Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := mux.o endif
obj-y += board.o obj-y += ../common/board_am335x.o obj-y += ../common/eeprom.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += ../common/factoryset.o endif diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index 8d316918e7a..828ae5c27a0 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -24,7 +24,7 @@ #include "../common/eeprom.h" #include "../common/factoryset.h"
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * Read header information from EEPROM into global structure. */ @@ -116,7 +116,7 @@ void spl_draco_board_init(void) REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO); REQUEST_AND_PULSE_RESET(DISPLAY_RESET_GPIO); } -#endif /* if def CONFIG_SPL_BUILD */ +#endif /* if def CONFIG_XPL_BUILD */
#if defined(CONFIG_DRIVER_TI_CPSW) static void cpsw_control(int enabled) @@ -168,7 +168,7 @@ int board_eth_init(struct bd_info *bis) int n = 0; int rv;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD factoryset_env_set(); #endif
@@ -183,7 +183,7 @@ int board_eth_init(struct bd_info *bis) return n; } #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ -#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ +#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_XPL_BUILD)) */
#if defined(CONFIG_HW_WATCHDOG) static bool hw_watchdog_init_done; diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index e9e4bc348cb..6fa3ca573ae 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -191,7 +191,7 @@ int board_eth_init(struct bd_info *bis) #endif /* CONFIG_MACB */ #endif
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #include <spl.h> #include <nand.h> #include <spi_flash.h> diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index 3764ab48ab3..252b0787124 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -79,7 +79,7 @@ static void taurus_nand_hw_init(void) at91_set_gpio_output(CFG_SYS_NAND_ENABLE_PIN, 1); }
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #include <spl.h> #include <nand.h> #include <spi_flash.h> @@ -331,7 +331,7 @@ int dram_init(void) return 0; }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) #if defined(CONFIG_BOARD_AXM) /* * Booting the Fallback Image. diff --git a/board/sifive/unleashed/Makefile b/board/sifive/unleashed/Makefile index 98e9111cbcc..d0a156d2cab 100644 --- a/board/sifive/unleashed/Makefile +++ b/board/sifive/unleashed/Makefile @@ -2,7 +2,7 @@ # # Copyright (c) 2019 Western Digital Corporation or its affiliates.
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-y += unleashed.o diff --git a/board/sifive/unmatched/Makefile b/board/sifive/unmatched/Makefile index 13453300896..ce9deed9cdc 100644 --- a/board/sifive/unmatched/Makefile +++ b/board/sifive/unmatched/Makefile @@ -4,7 +4,7 @@
obj-$(CONFIG_ID_EEPROM) += hifive-platform-i2c-eeprom.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-y += unmatched.o diff --git a/board/silinux/ek874/Makefile b/board/silinux/ek874/Makefile index 4c8f0925f1e..6917a2418ca 100644 --- a/board/silinux/ek874/Makefile +++ b/board/silinux/ek874/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y := ../../renesas/rcar-common/gen3-spl.o else obj-y := ek874.o ../../renesas/rcar-common/common.o diff --git a/board/softing/vining_2000/vining_2000.c b/board/softing/vining_2000/vining_2000.c index bd430cfaa7f..769f3e2ff2a 100644 --- a/board/softing/vining_2000/vining_2000.c +++ b/board/softing/vining_2000/vining_2000.c @@ -402,7 +402,7 @@ void board_preboot_os(void) setbits_le32(&gpc_regs->cntr, PCIE_PHY_PUP_REQ); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <linux/libfdt.h> #include <spl.h> #include <asm/arch/mx6-ddr.h> diff --git a/board/softing/vining_fpga/socfpga.c b/board/softing/vining_fpga/socfpga.c index 2483fbcf263..ec2c7ea3631 100644 --- a/board/softing/vining_fpga/socfpga.c +++ b/board/softing/vining_fpga/socfpga.c @@ -43,7 +43,7 @@ int board_late_init(void) return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int misc_init_r(void) { uchar data[128]; diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index 3406ba8616e..e9269ef5353 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -570,7 +570,7 @@ void board_boot_order(u32 *spl_boot_list) spl_boot_list[1] = BOOT_DEVICE_BOARD; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <asm/arch/mx6-ddr.h> static const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = { .dram_sdclk_0 = 0x00020030, diff --git a/board/st/common/cmd_stboard.c b/board/st/common/cmd_stboard.c index 50da063051b..b9d0abdba7d 100644 --- a/board/st/common/cmd_stboard.c +++ b/board/st/common/cmd_stboard.c @@ -29,7 +29,7 @@ * Board: MB<Board> Var<VarCPN>.<VarFG> Rev.<Revision>-<BOM> */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #include <command.h> #include <console.h> #include <misc.h> diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c index 6d86e4fe7aa..8966a09501e 100644 --- a/board/st/stm32f746-disco/stm32f746-disco.c +++ b/board/st/stm32f746-disco/stm32f746-disco.c @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init(void) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int rv; struct udevice *dev; rv = uclass_get_device(UCLASS_RAM, 0, &dev); @@ -45,7 +45,7 @@ int dram_init_banksize(void) return fdtdec_setup_memory_banksize(); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #ifdef CONFIG_SPL_OS_BOOT int spl_start_uboot(void) { diff --git a/board/st/stm32mp1/Makefile b/board/st/stm32mp1/Makefile index f2d720b67b3..5e39b7b189f 100644 --- a/board/st/stm32mp1/Makefile +++ b/board/st/stm32mp1/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2018, STMicroelectronics - All Rights Reserved #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o else obj-y += stm32mp1.o diff --git a/board/starfive/visionfive2/Makefile b/board/starfive/visionfive2/Makefile index c7ba4f7ed67..97c25a2fd13 100644 --- a/board/starfive/visionfive2/Makefile +++ b/board/starfive/visionfive2/Makefile @@ -4,5 +4,5 @@ #
obj-y := starfive_visionfive2.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o obj-$(CONFIG_ID_EEPROM) += visionfive2-i2c-eeprom.o diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 961cdcde74d..824c322a0dc 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -281,7 +281,7 @@ int dram_init(void) return 0; }
-#if defined(CONFIG_NAND_SUNXI) && defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NAND_SUNXI) && defined(CONFIG_XPL_BUILD) static void nand_pinmux_setup(void) { unsigned int pin; @@ -530,7 +530,7 @@ int mmc_get_env_dev(void) #endif #endif /* CONFIG_MMC */
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
static void sunxi_spl_store_dram_size(phys_addr_t dram_size) { @@ -641,7 +641,7 @@ void sunxi_board_init(void) else printf("Failed to set core voltage! Can't set CPU frequency\n"); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#ifdef CONFIG_USB_GADGET int g_dnl_board_usb_cable_connected(void) diff --git a/board/tcl/sl50/board.c b/board/tcl/sl50/board.c index 6c60c70b7b4..20fa61131cb 100644 --- a/board/tcl/sl50/board.c +++ b/board/tcl/sl50/board.c @@ -249,8 +249,8 @@ int board_late_init(void) } #endif
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_XPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH) && defined(CONFIG_XPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -303,10 +303,10 @@ static struct cpsw_platform_data cpsw_data = { * when we build an SPL that has neither option but full U-Boot will. */ #if ((defined(CONFIG_SPL_ETH) || defined(CONFIG_SPL_USB_ETHER)) \ - && defined(CONFIG_SPL_BUILD)) || \ + && defined(CONFIG_XPL_BUILD)) || \ ((defined(CONFIG_DRIVER_TI_CPSW) || \ defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \ - !defined(CONFIG_SPL_BUILD)) + !defined(CONFIG_XPL_BUILD)) int board_eth_init(struct bd_info *bis) { int rv, n = 0; @@ -323,8 +323,8 @@ int board_eth_init(struct bd_info *bis) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_XPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH) && defined(CONFIG_XPL_BUILD)) if (!env_get("ethaddr")) { printf("<ethaddr> not set. Validating first E-fuse MAC\n");
@@ -373,7 +373,7 @@ int board_eth_init(struct bd_info *bis)
#endif #if defined(CONFIG_USB_ETHER) && \ - (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USB_ETHER)) + (!defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_USB_ETHER)) if (is_valid_ether_addr(mac_addr)) eth_env_set_enetaddr("usbnet_devaddr", mac_addr);
diff --git a/board/technexion/pico-imx6/spl.c b/board/technexion/pico-imx6/spl.c index 50f51774264..700abb73289 100644 --- a/board/technexion/pico-imx6/spl.c +++ b/board/technexion/pico-imx6/spl.c @@ -24,7 +24,7 @@ #include <asm/arch/sys_proto.h> #include <spl.h>
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #include <asm/arch/mx6-ddr.h>
#define IMX6DQ_DRIVE_STRENGTH 0x30 diff --git a/board/technexion/pico-imx6ul/spl.c b/board/technexion/pico-imx6ul/spl.c index 67484e62dad..5b91868ba9c 100644 --- a/board/technexion/pico-imx6ul/spl.c +++ b/board/technexion/pico-imx6ul/spl.c @@ -18,7 +18,7 @@ #include <linux/libfdt.h> #include <spl.h>
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD)
#ifdef CONFIG_SPL_OS_BOOT int spl_start_uboot(void) diff --git a/board/technexion/pico-imx7d/spl.c b/board/technexion/pico-imx7d/spl.c index 8f219f76c60..cb60d3be420 100644 --- a/board/technexion/pico-imx7d/spl.c +++ b/board/technexion/pico-imx7d/spl.c @@ -21,7 +21,7 @@ #include <fsl_esdhc_imx.h> #include <spl.h>
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD)
#ifdef CONFIG_SPL_OS_BOOT int spl_start_uboot(void) diff --git a/board/technexion/pico-imx8mq/Makefile b/board/technexion/pico-imx8mq/Makefile index 7cfe1e02ef9..da3073cdf79 100644 --- a/board/technexion/pico-imx8mq/Makefile +++ b/board/technexion/pico-imx8mq/Makefile @@ -6,7 +6,7 @@
obj-y += pico-imx8mq.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing_1gb.o lpddr4_timing_2gb.o lpddr4_timing_3gb.o lpddr4_timing_4gb.o endif diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c index d7234532fe6..2f5ad769b9b 100644 --- a/board/theadorable/theadorable.c +++ b/board/theadorable/theadorable.c @@ -10,7 +10,7 @@ #include <init.h> #include <net.h> #include <pci.h> -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) #include <bootcount.h> #endif #include <asm/global_data.h> @@ -252,7 +252,7 @@ int board_eth_init(struct bd_info *bis) } #endif
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_BOARD_LATE_INIT) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_BOARD_LATE_INIT) int board_late_init(void) { pci_dev_t bdf; @@ -343,7 +343,7 @@ int board_late_init(void) } #endif
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_PCI) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_PCI) static int pcie_get_link_speed_width(pci_dev_t bdf, int *speed, int *width) { struct udevice *dev; diff --git a/board/theobroma-systems/jaguar_rk3588/Makefile b/board/theobroma-systems/jaguar_rk3588/Makefile index 532aab01532..d43bf194b68 100644 --- a/board/theobroma-systems/jaguar_rk3588/Makefile +++ b/board/theobroma-systems/jaguar_rk3588/Makefile @@ -5,6 +5,6 @@ #
obj-y += jaguar_rk3588.o -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-y += ../common/common.o endif diff --git a/board/theobroma-systems/puma_rk3399/Makefile b/board/theobroma-systems/puma_rk3399/Makefile index edd61a35c1e..2256e72cda1 100644 --- a/board/theobroma-systems/puma_rk3399/Makefile +++ b/board/theobroma-systems/puma_rk3399/Makefile @@ -5,6 +5,6 @@ #
obj-y += puma-rk3399.o -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-y += ../common/common.o endif diff --git a/board/theobroma-systems/ringneck_px30/Makefile b/board/theobroma-systems/ringneck_px30/Makefile index 45cc65baf9a..4d108f2d011 100644 --- a/board/theobroma-systems/ringneck_px30/Makefile +++ b/board/theobroma-systems/ringneck_px30/Makefile @@ -5,6 +5,6 @@ #
obj-y += ringneck-px30.o -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-y += ../common/common.o endif diff --git a/board/theobroma-systems/tiger_rk3588/Makefile b/board/theobroma-systems/tiger_rk3588/Makefile index 5c4c484657a..94b0859eb35 100644 --- a/board/theobroma-systems/tiger_rk3588/Makefile +++ b/board/theobroma-systems/tiger_rk3588/Makefile @@ -5,6 +5,6 @@ #
obj-y += tiger_rk3588.o -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-y += ../common/common.o endif diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 681002ba1da..720bf2cb3e1 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -569,8 +569,8 @@ void sdram_init(void) } #endif
-#if defined(CONFIG_CLOCK_SYNTHESIZER) && (!defined(CONFIG_SPL_BUILD) || \ - (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))) +#if defined(CONFIG_CLOCK_SYNTHESIZER) && (!defined(CONFIG_XPL_BUILD) || \ + (defined(CONFIG_SPL_ETH) && defined(CONFIG_XPL_BUILD))) static void request_and_set_gpio(int gpio, char *name, int val) { int ret; @@ -707,8 +707,8 @@ int board_init(void) gpmc_init(); #endif
-#if defined(CONFIG_CLOCK_SYNTHESIZER) && (!defined(CONFIG_SPL_BUILD) || \ - (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))) +#if defined(CONFIG_CLOCK_SYNTHESIZER) && (!defined(CONFIG_XPL_BUILD) || \ + (defined(CONFIG_SPL_ETH) && defined(CONFIG_XPL_BUILD))) if (board_is_icev2()) { int rv; u32 reg; @@ -798,7 +798,7 @@ int board_init(void) int board_late_init(void) { struct udevice *dev; -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; #endif @@ -847,7 +847,7 @@ int board_late_init(void) env_set("boot_fit", "1"); #endif
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); mac_hi = readl(&cdev->macid0h); diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index cc5e64c9879..fc0d87daae4 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -515,7 +515,7 @@ int get_voltrail_opp(int rail_offset) return opp; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* No env to setup for SPL */ static inline void setup_board_eeprom_env(void) { }
@@ -538,7 +538,7 @@ void do_board_detect(void) #endif }
-#else /* CONFIG_SPL_BUILD */ +#else /* CONFIG_XPL_BUILD */
/* Override function to read eeprom information: actual i2c read done by SPL*/ void do_board_detect(void) @@ -616,7 +616,7 @@ invalid_eeprom: set_board_info_env(name); }
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
void vcores_init(void) { @@ -783,7 +783,7 @@ int board_late_init(void) if (board_is_bbai()) env_set("console", "ttyS0,115200n8");
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) board_ti_set_ethaddr(2); #endif
@@ -935,7 +935,7 @@ const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr) } #endif
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_OS_BOOT) int spl_start_uboot(void) { /* break into full u-boot on 'c' */ diff --git a/board/ti/am62x/evm.c b/board/ti/am62x/evm.c index 9bdd0223cdb..1166c9b8e09 100644 --- a/board/ti/am62x/evm.c +++ b/board/ti/am62x/evm.c @@ -103,7 +103,7 @@ int dram_init_banksize(void) return fdtdec_setup_memory_banksize(); }
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD)
void spl_board_init(void) { diff --git a/board/ti/am64x/evm.c b/board/ti/am64x/evm.c index 609e5cf6d51..00b8317d6bf 100644 --- a/board/ti/am64x/evm.c +++ b/board/ti/am64x/evm.c @@ -105,7 +105,7 @@ int board_fit_config_name_match(const char *name) } #endif
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #if CONFIG_IS_ENABLED(USB_STORAGE) static int fixup_usb_boot(const void *fdt_blob) { diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c index ea21d48bbc0..a43cc075b92 100644 --- a/board/ti/common/board_detect.c +++ b/board/ti/common/board_detect.c @@ -304,7 +304,7 @@ int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr) struct ti_common_eeprom *ep;
ep = TI_EEPROM_DATA; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (ep->header == TI_EEPROM_HEADER_MAGIC) return 0; /* EEPROM has already been read */ #endif @@ -350,7 +350,7 @@ int __maybe_unused ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr) struct ti_common_eeprom *ep;
ep = TI_EEPROM_DATA; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (ep->header == DRA7_EEPROM_HEADER_MAGIC) return 0; /* EEPROM has already been read */ #endif @@ -563,7 +563,7 @@ int __maybe_unused ti_i2c_eeprom_am6_get_base(int bus_addr, int dev_addr) * Always execute EEPROM read by not allowing to bypass it during the * first invocation of SPL which happens on the R5 core. */ -#if !(defined(CONFIG_SPL_BUILD) && defined(CONFIG_CPU_V7R)) +#if !(defined(CONFIG_XPL_BUILD) && defined(CONFIG_CPU_V7R)) if (ep->header == TI_EEPROM_HEADER_MAGIC) { debug("%s: EEPROM has already been read\n", __func__); return 0; diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 2b1db2541b0..98d63e14e29 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -713,7 +713,7 @@ int board_late_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void do_board_detect(void) { int rc; @@ -756,7 +756,7 @@ void do_board_detect(void) snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN, "Board: %s REV %s\n", bname, board_ti_get_rev()); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
void vcores_init(void) { @@ -972,7 +972,7 @@ const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr) } #endif
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_OS_BOOT) int spl_start_uboot(void) { /* break into full u-boot on 'c' */ diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c index f3452ff0a8f..6221be9dcff 100644 --- a/board/ti/j721e/evm.c +++ b/board/ti/j721e/evm.c @@ -164,7 +164,7 @@ static void __maybe_unused detect_enable_hyperflash(void *blob) } #endif
-#if defined(CONFIG_SPL_BUILD) && (defined(CONFIG_TARGET_J7200_A72_EVM) || defined(CONFIG_TARGET_J7200_R5_EVM) || \ +#if defined(CONFIG_XPL_BUILD) && (defined(CONFIG_TARGET_J7200_A72_EVM) || defined(CONFIG_TARGET_J7200_R5_EVM) || \ defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J721E_R5_EVM)) void spl_perform_fixups(struct spl_image_info *spl_image) { @@ -340,7 +340,7 @@ static int probe_daughtercards(void) printf("Detected: %s rev %s\n", ep.name, ep.version); daughter_card_detect_flags[i] = true;
- if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { int j; /* * Populate any MAC addresses from daughtercard into the U-Boot @@ -359,7 +359,7 @@ static int probe_daughtercards(void) } }
- if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { char name_overlays[1024] = { 0 };
for (i = 0; i < ARRAY_SIZE(ext_cards); i++) { diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c index 5a0281d6b48..2cfeb3bec6c 100644 --- a/board/ti/j721s2/evm.c +++ b/board/ti/j721s2/evm.c @@ -239,7 +239,7 @@ static int probe_daughtercards(void) printf("Detected: %s rev %s\n", ep.name, ep.version); daughter_card_detect_flags[i] = true;
- if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { int j; /* * Populate any MAC addresses from daughtercard into the U-Boot @@ -257,7 +257,7 @@ static int probe_daughtercards(void) } }
- if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { char name_overlays[1024] = { 0 };
for (i = 0; i < ARRAY_SIZE(ext_cards); i++) { diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index c6735d37dda..48547719012 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -75,7 +75,7 @@ int board_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_board_init(void) { spl_init_keystone_plls(); diff --git a/board/ti/ks2_evm/board_k2e.c b/board/ti/ks2_evm/board_k2e.c index 4385be4221b..3ccf70c5ac7 100644 --- a/board/ti/ks2_evm/board_k2e.c +++ b/board/ti/ks2_evm/board_k2e.c @@ -109,7 +109,7 @@ int board_early_init_f(void) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_init_keystone_plls(void) { init_plls(); diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c index d07b77d23e2..b1142ed5e96 100644 --- a/board/ti/ks2_evm/board_k2g.c +++ b/board/ti/ks2_evm/board_k2g.c @@ -346,7 +346,7 @@ int embedded_dtb_select(void) #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_TI_I2C_BOARD_DETECT) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_TI_I2C_BOARD_DETECT) int rc;
rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, @@ -382,7 +382,7 @@ int board_early_init_f(void) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_init_keystone_plls(void) { init_plls(); diff --git a/board/ti/ks2_evm/board_k2hk.c b/board/ti/ks2_evm/board_k2hk.c index 2b5d2d75664..93249fa5f49 100644 --- a/board/ti/ks2_evm/board_k2hk.c +++ b/board/ti/ks2_evm/board_k2hk.c @@ -116,7 +116,7 @@ int board_fit_config_name_match(const char *name) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_init_keystone_plls(void) { init_plls(); diff --git a/board/ti/ks2_evm/board_k2l.c b/board/ti/ks2_evm/board_k2l.c index 1971bc94f7d..b813f21b682 100644 --- a/board/ti/ks2_evm/board_k2l.c +++ b/board/ti/ks2_evm/board_k2l.c @@ -104,7 +104,7 @@ int board_fit_config_name_match(const char *name) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_init_keystone_plls(void) { init_plls(); diff --git a/board/ti/omap3evm/evm.c b/board/ti/omap3evm/evm.c index 4eb08add256..8803643b032 100644 --- a/board/ti/omap3evm/evm.c +++ b/board/ti/omap3evm/evm.c @@ -117,7 +117,7 @@ int spl_start_uboot(void) } #endif /* CONFIG_SPL_OS_BOOT */
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) /* * Routine: get_board_mem_timings * Description: If we use SPL then there is no x-loader nor config header @@ -150,7 +150,7 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; timings->mr = MICRON_V_MR_165; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* * Routine: misc_init_r diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index ad404f7e9c4..a2a3a9489aa 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -147,7 +147,7 @@ void board_mmc_power_init(void) } #endif
-#if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_XPL_BUILD) /* * Routine: board_eth_init * Description: Setting up the Ethernet hardware. diff --git a/board/topic/zynq/Makefile b/board/topic/zynq/Makefile index cc100b0f422..23a6dd86441 100644 --- a/board/topic/zynq/Makefile +++ b/board/topic/zynq/Makefile @@ -6,4 +6,4 @@ obj-y += ../../xilinx/common/board.o # Remove quotes hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE))
-obj-$(CONFIG_SPL_BUILD) += $(hw-platform-y)/ps7_init_gpl.o +obj-$(CONFIG_XPL_BUILD) += $(hw-platform-y)/ps7_init_gpl.o diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index 4a1cfb89345..ec0f223c4aa 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -96,7 +96,7 @@ iomux_v3_cfg_t const uart1_pads_dte[] = { MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), };
-#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_XPL_BUILD) /* Apalis MMC1 */ iomux_v3_cfg_t const usdhc1_pads[] = { MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -139,7 +139,7 @@ iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(WEAK_PULLUP) | MUX_MODE_SION, }; -#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */ +#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_XPL_BUILD */
int mx6_rgmii_rework(struct phy_device *phydev) { @@ -321,7 +321,7 @@ int board_ehci_hcd_init(int port) } #endif
-#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_XPL_BUILD) /* use the following sequence: eMMC, MMC1, SD1 */ struct fsl_esdhc_cfg usdhc_cfg[CFG_SYS_FSL_USDHC_NUM] = { {USDHC3_BASE_ADDR}, @@ -391,7 +391,7 @@ int board_mmc_init(struct bd_info *bis)
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); } -#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */ +#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_XPL_BUILD */
int board_phy_config(struct phy_device *phydev) { @@ -748,7 +748,7 @@ void ldo_mode_set(int ldo_bypass) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <spl.h> #include <linux/libfdt.h> #include "asm/arch/mx6q-ddr.h" @@ -1042,7 +1042,7 @@ void reset_cpu(void) { }
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
static struct mxc_serial_plat mxc_serial_plat = { .reg = (struct mxc_uart *)UART1_BASE, diff --git a/board/toradex/apalis_imx6/do_fuse.c b/board/toradex/apalis_imx6/do_fuse.c index b404b01e032..698b05bc5ad 100644 --- a/board/toradex/apalis_imx6/do_fuse.c +++ b/board/toradex/apalis_imx6/do_fuse.c @@ -7,7 +7,7 @@ * Helpers for i.MX OTP fusing during module production */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #include <command.h> #include <console.h> #include <fuse.h> @@ -94,4 +94,4 @@ U_BOOT_CMD( "OTP fusing during module update", "updt_fuse [-n] [-y] - boot cfg fast boot mode fusing" ); -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/board/toradex/apalis_imx6/pf0100.c b/board/toradex/apalis_imx6/pf0100.c index 157aaec6fe0..7ea9bbb07ed 100644 --- a/board/toradex/apalis_imx6/pf0100.c +++ b/board/toradex/apalis_imx6/pf0100.c @@ -212,7 +212,7 @@ unsigned pmic_init(void) return programmed; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int pf0100_prog(void) { int rc; @@ -280,4 +280,4 @@ U_BOOT_CMD( "Program the OTP fuses on the PMIC PF0100", "" ); -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/board/toradex/apalis_t30/Makefile b/board/toradex/apalis_t30/Makefile index eed607043fc..2d079004c4b 100644 --- a/board/toradex/apalis_t30/Makefile +++ b/board/toradex/apalis_t30/Makefile @@ -1,6 +1,6 @@ # Copyright (c) 2014 Marcel Ziswiler # SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_SPL_BUILD) += apalis_t30-spl.o +obj-$(CONFIG_XPL_BUILD) += apalis_t30-spl.o
obj-y += apalis_t30.o diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index 251970b99cc..64cf99e9cfc 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -86,7 +86,7 @@ iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), };
-#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_XPL_BUILD) /* Colibri MMC */ iomux_v3_cfg_t const usdhc1_pads[] = { MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -113,7 +113,7 @@ iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; -#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */ +#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_XPL_BUILD */
/* mux auxiliary pins to GPIO, so they can be used from the U-Boot cmdline */ iomux_v3_cfg_t const gpio_pads[] = { @@ -289,7 +289,7 @@ int board_ehci_hcd_init(int port) } #endif
-#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_XPL_BUILD) /* use the following sequence: eMMC, MMC */ struct fsl_esdhc_cfg usdhc_cfg[CFG_SYS_FSL_USDHC_NUM] = { {USDHC3_BASE_ADDR}, @@ -346,7 +346,7 @@ int board_mmc_init(struct bd_info *bis)
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); } -#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */ +#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_XPL_BUILD */
int board_phy_config(struct phy_device *phydev) { @@ -677,7 +677,7 @@ void ldo_mode_set(int ldo_bypass) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <spl.h> #include <linux/libfdt.h> #include "asm/arch/mx6dl-ddr.h" @@ -1101,7 +1101,7 @@ void reset_cpu(void) { }
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
static struct mxc_serial_plat mxc_serial_plat = { .reg = (struct mxc_uart *)UART1_BASE, diff --git a/board/toradex/colibri_imx6/do_fuse.c b/board/toradex/colibri_imx6/do_fuse.c index b404b01e032..698b05bc5ad 100644 --- a/board/toradex/colibri_imx6/do_fuse.c +++ b/board/toradex/colibri_imx6/do_fuse.c @@ -7,7 +7,7 @@ * Helpers for i.MX OTP fusing during module production */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #include <command.h> #include <console.h> #include <fuse.h> @@ -94,4 +94,4 @@ U_BOOT_CMD( "OTP fusing during module update", "updt_fuse [-n] [-y] - boot cfg fast boot mode fusing" ); -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/board/toradex/colibri_imx6/pf0100.c b/board/toradex/colibri_imx6/pf0100.c index 58b7bc3bb9a..b5dffc87b35 100644 --- a/board/toradex/colibri_imx6/pf0100.c +++ b/board/toradex/colibri_imx6/pf0100.c @@ -197,7 +197,7 @@ unsigned pmic_init(void) return programmed; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int pf0100_prog(void) { int rc; @@ -265,4 +265,4 @@ U_BOOT_CMD( "Program the OTP fuses on the PMIC PF0100", "" ); -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/board/toradex/colibri_t30/Makefile b/board/toradex/colibri_t30/Makefile index 8f333235b17..1cc801c8cfd 100644 --- a/board/toradex/colibri_t30/Makefile +++ b/board/toradex/colibri_t30/Makefile @@ -1,6 +1,6 @@ # Copyright (c) 2013-2014 Stefan Agner # SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_SPL_BUILD) += colibri_t30-spl.o +obj-$(CONFIG_XPL_BUILD) += colibri_t30-spl.o
obj-y += colibri_t30.o diff --git a/board/toradex/common/Makefile b/board/toradex/common/Makefile index 7b19b6e4c87..7e3905445a5 100644 --- a/board/toradex/common/Makefile +++ b/board/toradex/common/Makefile @@ -2,7 +2,7 @@ # Copyright (c) 2016 Toradex, Inc.
# Common for all Toradex modules -ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) # Necessary to create built-in.o obj- := __dummy__.o else diff --git a/board/toradex/verdin-imx8mm/Makefile b/board/toradex/verdin-imx8mm/Makefile index b38054254da..eee58aa2f83 100644 --- a/board/toradex/verdin-imx8mm/Makefile +++ b/board/toradex/verdin-imx8mm/Makefile @@ -5,7 +5,7 @@
obj-y += verdin-imx8mm.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/toradex/verdin-imx8mp/Makefile b/board/toradex/verdin-imx8mp/Makefile index 98fa14e4e2a..5edd1778816 100644 --- a/board/toradex/verdin-imx8mp/Makefile +++ b/board/toradex/verdin-imx8mp/Makefile @@ -5,7 +5,7 @@
obj-y += verdin-imx8mp.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o endif diff --git a/board/udoo/neo/neo.c b/board/udoo/neo/neo.c index 4cf214bf17c..bc30bdac462 100644 --- a/board/udoo/neo/neo.c +++ b/board/udoo/neo/neo.c @@ -209,7 +209,7 @@ int board_late_init(void) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
#include <linux/libfdt.h> #include <asm/arch/mx6-ddr.h> diff --git a/board/udoo/udoo_spl.c b/board/udoo/udoo_spl.c index 6c477530055..b845284d688 100644 --- a/board/udoo/udoo_spl.c +++ b/board/udoo/udoo_spl.c @@ -23,7 +23,7 @@ #include <asm/arch/sys_proto.h> #include <spl.h>
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #include <asm/arch/mx6-ddr.h>
/* diff --git a/board/variscite/common/imx9_eeprom.c b/board/variscite/common/imx9_eeprom.c index 32551af5b40..bfa30adc256 100644 --- a/board/variscite/common/imx9_eeprom.c +++ b/board/variscite/common/imx9_eeprom.c @@ -83,7 +83,7 @@ int var_eeprom_get_dram_size(struct var_eeprom *ep, phys_size_t *size)
void var_eeprom_print_prod_info(struct var_eeprom *ep) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return;
flush_dcache_all(); diff --git a/board/variscite/dart_6ul/Makefile b/board/variscite/dart_6ul/Makefile index 48aa361bf2d..39c3f53e736 100644 --- a/board/variscite/dart_6ul/Makefile +++ b/board/variscite/dart_6ul/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+
obj-y := dart_6ul.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/board/variscite/imx8mn_var_som/Makefile b/board/variscite/imx8mn_var_som/Makefile index a8b6a343ffc..36d9c36dd2d 100644 --- a/board/variscite/imx8mn_var_som/Makefile +++ b/board/variscite/imx8mn_var_som/Makefile @@ -6,7 +6,7 @@
obj-y += imx8mn_var_som.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-y += ddr4_timing.o endif diff --git a/board/variscite/imx8mn_var_som/imx8mn_var_som.c b/board/variscite/imx8mn_var_som/imx8mn_var_som.c index 532d8d60a76..80c84e64241 100644 --- a/board/variscite/imx8mn_var_som/imx8mn_var_som.c +++ b/board/variscite/imx8mn_var_som/imx8mn_var_som.c @@ -54,7 +54,7 @@ int board_mmc_get_env_dev(int devno) return devno; }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD)
#if defined(CONFIG_DISPLAY_BOARDINFO)
@@ -227,4 +227,4 @@ int ft_board_setup(void *blob, struct bd_info *bd) } #endif /* CONFIG_OF_BOARD_SETUP */
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/board/variscite/imx93_var_som/Makefile b/board/variscite/imx93_var_som/Makefile index b63883901bd..8b160f189c1 100644 --- a/board/variscite/imx93_var_som/Makefile +++ b/board/variscite/imx93_var_som/Makefile @@ -8,7 +8,7 @@ obj-y += imx93_var_som.o obj-$(CONFIG_TARGET_IMX93_VAR_SOM) += ../common/imx9_eeprom.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-$(CONFIG_TARGET_IMX93_VAR_SOM) += lpddr4x_timing.o else diff --git a/board/vscom/baltos/board.c b/board/vscom/baltos/board.c index f54f183038b..de9f8367d59 100644 --- a/board/vscom/baltos/board.c +++ b/board/vscom/baltos/board.c @@ -131,7 +131,7 @@ static int read_eeprom(BSP_VS_HWPARAM *header) return 0; }
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) +#if defined(CONFIG_XPL_BUILD) || defined(CONFIG_NOR_BOOT)
static const struct ddr_data ddr3_baltos_data = { .datardsratio0 = MT41K256M16HA125E_RD_DQS, @@ -371,8 +371,8 @@ int board_late_init(void) } #endif
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_XPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH) && defined(CONFIG_XPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -415,10 +415,10 @@ static struct cpsw_platform_data cpsw_data = { #endif
#if ((defined(CONFIG_SPL_ETH) || defined(CONFIG_SPL_USB_ETHER)) \ - && defined(CONFIG_SPL_BUILD)) || \ + && defined(CONFIG_XPL_BUILD)) || \ ((defined(CONFIG_DRIVER_TI_CPSW) || \ defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \ - !defined(CONFIG_SPL_BUILD)) + !defined(CONFIG_XPL_BUILD)) int board_eth_init(struct bd_info *bis) { int rv, n = 0; @@ -442,8 +442,8 @@ int board_eth_init(struct bd_info *bis) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_XPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH) && defined(CONFIG_XPL_BUILD)) if (!env_get("ethaddr")) { printf("<ethaddr> not set. Validating first E-fuse MAC\n");
diff --git a/board/wandboard/Makefile b/board/wandboard/Makefile index c3d80536b3a..6e5bcc11630 100644 --- a/board/wandboard/Makefile +++ b/board/wandboard/Makefile @@ -3,4 +3,4 @@ # (C) Copyright 2013 Freescale Semiconductor, Inc.
obj-y := wandboard.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/board/wexler/qc750/Makefile b/board/wexler/qc750/Makefile index 4daefc4159a..5f9ebafd89c 100644 --- a/board/wexler/qc750/Makefile +++ b/board/wexler/qc750/Makefile @@ -6,6 +6,6 @@ # (C) Copyright 2023 # Svyatoslav Ryhel clamor95@gmail.com
-obj-$(CONFIG_SPL_BUILD) += qc750-spl.o +obj-$(CONFIG_XPL_BUILD) += qc750-spl.o
obj-y += qc750.o diff --git a/board/work-microwave/work_92105/Makefile b/board/work-microwave/work_92105/Makefile index b837e7b0dd8..a96098d0f2a 100644 --- a/board/work-microwave/work_92105/Makefile +++ b/board/work-microwave/work_92105/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2014 DENX Software Engineering GmbH # Written-by: Albert ARIBAUD albert.aribaud@3adev.fr
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += work_92105_spl.o else obj-y += work_92105.o diff --git a/board/xilinx/common/Makefile b/board/xilinx/common/Makefile index d563290ab90..4b8fdec5830 100644 --- a/board/xilinx/common/Makefile +++ b/board/xilinx/common/Makefile @@ -8,6 +8,6 @@ obj-y += board.o ifndef CONFIG_ARCH_ZYNQ obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o endif -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_FRU) += fru.o fru_ops.o endif diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c index 5e5eb49ddf3..68f401e4b34 100644 --- a/board/xilinx/common/board.c +++ b/board/xilinx/common/board.c @@ -370,7 +370,7 @@ void *board_fdt_blob_setup(int *err) return fdt_blob; }
- if (!IS_ENABLED(CONFIG_SPL_BUILD) && + if (!IS_ENABLED(CONFIG_XPL_BUILD) && !IS_ENABLED(CONFIG_VERSAL_NO_DDR) && !IS_ENABLED(CONFIG_ZYNQMP_NO_DDR)) { fdt_blob = (void *)CONFIG_XILINX_OF_BOARD_DTB_ADDR; @@ -381,7 +381,7 @@ void *board_fdt_blob_setup(int *err) debug("DTB is not passed via %p\n", fdt_blob); }
- if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { /* * FDT is at end of BSS unless it is in a different memory * region @@ -515,7 +515,7 @@ int __maybe_unused board_fit_config_name_match(const char *name) { debug("%s: Check %s, default %s\n", __func__, name, board_name);
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) if (IS_ENABLED(CONFIG_REGEX)) { struct slre slre; int ret; diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c index 2b035d53589..dc4523824b4 100644 --- a/board/xilinx/microblaze-generic/microblaze-generic.c +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -40,7 +40,7 @@ int board_late_init(void) ulong max_size; u32 status = 0;
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SYSRESET_MICROBLAZE) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SYSRESET_MICROBLAZE) int ret;
ret = device_bind_driver(gd->dm_root, "mb_soft_reset", diff --git a/board/xilinx/zynq/Makefile b/board/xilinx/zynq/Makefile index 85661715891..f40fe382f57 100644 --- a/board/xilinx/zynq/Makefile +++ b/board/xilinx/zynq/Makefile @@ -26,17 +26,17 @@ endif ifeq ($(init-objs),) ifneq ($(wildcard $(srctree)/$(src)/ps7_init_gpl.c),) init-objs := ps7_init_gpl.o -$(if $(CONFIG_SPL_BUILD),\ +$(if $(CONFIG_XPL_BUILD),\ $(warning Put custom ps7_init_gpl.c/h to board/xilinx/zynq/custom_hw_platform/)) endif endif
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_ZYNQ) += cmds.o obj-$(CONFIG_CMD_ZYNQ_RSA) += bootimg.o endif
-obj-$(CONFIG_SPL_BUILD) += $(init-objs) +obj-$(CONFIG_XPL_BUILD) += $(init-objs)
# Suppress "warning: function declaration isn't a prototype" CFLAGS_REMOVE_ps7_init_gpl.o := -Wstrict-prototypes diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index b9a91110ff7..a852d5b8ed5 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -27,7 +27,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DEBUG_UART_BOARD_INIT) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_DEBUG_UART_BOARD_INIT) void board_debug_uart_init(void) { /* Add initialization sequence if UART is not configured */ @@ -36,7 +36,7 @@ void board_debug_uart_init(void)
int board_init(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) printf("Silicon version:\t%d\n", zynq_get_silicon_version());
if (CONFIG_IS_ENABLED(DM_I2C) && CONFIG_IS_ENABLED(I2C_EEPROM)) diff --git a/board/xilinx/zynqmp/Makefile b/board/xilinx/zynqmp/Makefile index 9ab50eca400..544346d686e 100644 --- a/board/xilinx/zynqmp/Makefile +++ b/board/xilinx/zynqmp/Makefile @@ -26,16 +26,16 @@ endif ifeq ($(init-objs),) ifneq ($(wildcard $(srctree)/$(src)/psu_init_gpl.c),) init-objs := psu_init_gpl.o -$(if $(CONFIG_SPL_BUILD),\ +$(if $(CONFIG_XPL_BUILD),\ $(warning Put custom psu_init_gpl.c/h to board/xilinx/zynqmp/custom_hw_platform/)) endif endif
obj-$(CONFIG_$(SPL_)ZYNQMP_PSU_INIT_ENABLED) += $(init-objs)
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"") -obj-$(CONFIG_SPL_BUILD) += pm_cfg_obj.o +obj-$(CONFIG_XPL_BUILD) += pm_cfg_obj.o $(obj)/pm_cfg_obj.o: $(shell cd $(srctree); readlink -f $(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE)) FORCE endif endif diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index 20a675c010d..8cdd9d86009 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -86,7 +86,7 @@ int __maybe_unused psu_uboot_init(void) return 0; }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) # if defined(CONFIG_DEBUG_UART_BOARD_INIT) void board_debug_uart_init(void) { @@ -120,7 +120,7 @@ static int multi_boot(void) return multiboot; }
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) static void restore_jtag(void) { if (current_el() != 3) @@ -155,7 +155,7 @@ int board_init(void) int ret; #endif
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) /* Check *at build time* if the filename is an non-empty string */ if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1) zynqmp_pmufw_load_config_object(zynqmp_pm_cfg_obj, diff --git a/boot/Makefile b/boot/Makefile index f4675d6ffd5..299a22ed689 100644 --- a/boot/Makefile +++ b/boot/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2004-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_BOOT_RETRY) += bootretry.o obj-$(CONFIG_CMD_BOOTM) += bootm.o bootm_os.o diff --git a/boot/image-android-dt.c b/boot/image-android-dt.c index 3b25018c2e7..653835cea76 100644 --- a/boot/image-android-dt.c +++ b/boot/image-android-dt.c @@ -72,7 +72,7 @@ bool android_dt_get_fdt_by_index(ulong hdr_addr, u32 index, ulong *addr, return true; }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) static void android_dt_print_fdt_info(const struct fdt_header *fdt) { u32 fdt_size; diff --git a/boot/image-android.c b/boot/image-android.c index 774565fd1fe..fdfff58a2a7 100644 --- a/boot/image-android.c +++ b/boot/image-android.c @@ -652,7 +652,7 @@ bool android_image_get_dtb_by_index(ulong hdr_addr, ulong vendor_boot_img, return false; }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /** * android_print_contents - prints out the contents of the Android format image * @hdr: pointer to the Android format image header diff --git a/boot/image-fit-sig.c b/boot/image-fit-sig.c index fe328df4a85..35873b1fb0e 100644 --- a/boot/image-fit-sig.c +++ b/boot/image-fit-sig.c @@ -48,7 +48,7 @@ struct image_region *fit_region_make_list(const void *fit, * Use malloc() except in SPL (to save code size). In SPL the caller * must allocate the array. */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && !region) + if (!IS_ENABLED(CONFIG_XPL_BUILD) && !region) region = calloc(sizeof(*region), count); if (!region) return NULL; diff --git a/cmd/Makefile b/cmd/Makefile index 91227f1249c..ed62e1c45f8 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2004-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD # core command obj-y += boot.o obj-$(CONFIG_CMD_BOOTM) += bootm.o @@ -247,7 +247,7 @@ obj-$(CONFIG_ARCH_MVEBU) += mvebu/ obj-$(CONFIG_ARCH_KEYSTONE) += ti/ obj-$(CONFIG_ARCH_K3) += ti/ obj-$(CONFIG_ARCH_OMAP2PLUS) += ti/ -endif # !CONFIG_SPL_BUILD +endif # !CONFIG_XPL_BUILD
obj-$(CONFIG_$(SPL_)CMD_TLV_EEPROM) += tlv_eeprom.o
diff --git a/cmd/nvedit.c b/cmd/nvedit.c index 98a687bcabb..74ff5c6fc11 100644 --- a/cmd/nvedit.c +++ b/cmd/nvedit.c @@ -49,7 +49,7 @@ DECLARE_GLOBAL_DATA_PTR; */ #define MAX_ENV_SIZE (1 << 20) /* 1 MiB */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Command interface: print one or all environment variables * @@ -182,9 +182,9 @@ DONE: return 0; } #endif -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_env_set(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { @@ -503,9 +503,9 @@ static int do_env_select(struct cmd_tbl *cmdtp, int flag, int argc, } #endif
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_env_default(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { @@ -1289,4 +1289,4 @@ U_BOOT_CMD_COMPLETE( var_complete ); #endif -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/common/Makefile b/common/Makefile index d871113cbb9..9fdad4bc38d 100644 --- a/common/Makefile +++ b/common/Makefile @@ -4,7 +4,7 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# core -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += init/ obj-y += main.o obj-y += exports.o @@ -42,12 +42,12 @@ obj-$(CONFIG_MENU) += menu.o obj-$(CONFIG_UPDATE_COMMON) += update.o obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
-endif # !CONFIG_SPL_BUILD +endif # !CONFIG_XPL_BUILD
obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_SPL_DFU obj-$(CONFIG_DFU_OVER_USB) += dfu.o endif @@ -58,14 +58,14 @@ obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o obj-$(CONFIG_SPL_MUSB_NEW) += usb.o obj-$(CONFIG_SPL_SPLASH_SCREEN) += splash.o obj-$(CONFIG_SPL_SPLASH_SOURCE) += splash_source.o -endif # CONFIG_SPL_BUILD +endif # CONFIG_XPL_BUILD
#others obj-$(CONFIG_DDR_SPD) += ddr_spd.o obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o obj-$(CONFIG_HWCONFIG) += hwconfig.o obj-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_TPL_BUILD obj-$(CONFIG_TPL_SERIAL) += console.o else @@ -73,7 +73,7 @@ obj-$(CONFIG_SPL_SERIAL) += console.o endif else obj-y += console.o -endif # CONFIG_SPL_BUILD +endif # CONFIG_XPL_BUILD
obj-$(CONFIG_CROS_EC) += cros_ec.o obj-y += dlmalloc.o diff --git a/common/cli_readline.c b/common/cli_readline.c index 4cb82b40149..4e6797a1944 100644 --- a/common/cli_readline.c +++ b/common/cli_readline.c @@ -73,7 +73,7 @@ static char *delete_char (char *buffer, char *p, int *colp, int *np, int plen) #define getcmd_getch() getchar() #define getcmd_cbeep() getcmd_putch('\a')
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define HIST_MAX 3 #define HIST_SIZE 32 #else diff --git a/common/console.c b/common/console.c index c9e206aec41..22224701e45 100644 --- a/common/console.c +++ b/common/console.c @@ -191,7 +191,7 @@ static int console_setfile(int file, struct stdio_dev * dev) /* Assign the new device (leaving the existing one started) */ stdio_devices[file] = dev;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Update monitor functions * (to use the console stuff by other applications) diff --git a/common/hash.c b/common/hash.c index ac63803fed9..db6925d6782 100644 --- a/common/hash.c +++ b/common/hash.c @@ -403,7 +403,7 @@ int hash_block(const char *algo_name, const void *data, unsigned int len, return 0; }
-#if !defined(CONFIG_SPL_BUILD) && (defined(CONFIG_CMD_HASH) || \ +#if !defined(CONFIG_XPL_BUILD) && (defined(CONFIG_CMD_HASH) || \ defined(CONFIG_CMD_SHA1SUM) || defined(CONFIG_CMD_CRC32)) || \ defined(CONFIG_CMD_MD5SUM) /** diff --git a/common/spl/Makefile b/common/spl/Makefile index 137b18428bd..10528b31a7c 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -6,7 +6,7 @@ # Based on common/Makefile. #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o diff --git a/common/splash_source.c b/common/splash_source.c index 5b271160449..f43e7cc1be7 100644 --- a/common/splash_source.c +++ b/common/splash_source.c @@ -215,7 +215,7 @@ static int splash_init_virtio(void) } }
-#if defined(CONFIG_CMD_UBIFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_UBIFS) && !defined(CONFIG_XPL_BUILD) static int splash_mount_ubifs(struct splash_location *location) { int res; diff --git a/config.mk b/config.mk index b915c29b3f3..e294be2a4c4 100644 --- a/config.mk +++ b/config.mk @@ -21,7 +21,7 @@ VENDOR :=
ARCH := $(CONFIG_SYS_ARCH:"%"=%) CPU := $(CONFIG_SYS_CPU:"%"=%) -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_ARCH_TEGRA CPU := arm720t endif diff --git a/disk/part.c b/disk/part.c index 706d77b3194..303178161c0 100644 --- a/disk/part.c +++ b/disk/part.c @@ -482,7 +482,7 @@ int blk_get_device_part_str(const char *ifname, const char *dev_part_str, } #endif
-#if IS_ENABLED(CONFIG_CMD_UBIFS) && !IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_CMD_UBIFS) && !IS_ENABLED(CONFIG_XPL_BUILD) /* * Special-case ubi, ubi goes through a mtd, rather than through * a regular block device. diff --git a/disk/part_dos.c b/disk/part_dos.c index 09af2aeeb99..96f748702fd 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -100,7 +100,7 @@ static int test_block_type(unsigned char *buffer)
static int part_test_dos(struct blk_desc *desc) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD ALLOC_CACHE_ALIGN_BUFFER(legacy_mbr, mbr, DIV_ROUND_UP(desc->blksz, sizeof(legacy_mbr)));
diff --git a/doc/develop/distro.rst b/doc/develop/distro.rst index 9e715b23ebb..637bc27fc2d 100644 --- a/doc/develop/distro.rst +++ b/doc/develop/distro.rst @@ -189,7 +189,7 @@ TO BE UPDATED:
In your board configuration file, include the following::
- #ifndef CONFIG_SPL_BUILD + #ifndef CONFIG_XPL_BUILD #include <config_distro_bootcmd.h> #endif
@@ -316,7 +316,7 @@ that it supports the correct set of possible boot device types. To provide this configuration, simply define macro BOOT_TARGET_DEVICES prior to including <config_distro_bootcmd.h>. For example::
- #ifndef CONFIG_SPL_BUILD + #ifndef CONFIG_XPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ diff --git a/doc/develop/qconfig.rst b/doc/develop/qconfig.rst index 123779eab17..a18f32470ca 100644 --- a/doc/develop/qconfig.rst +++ b/doc/develop/qconfig.rst @@ -226,7 +226,7 @@ Available options Look for moved config options in spl/include/autoconf.mk instead of include/autoconf.mk. This is useful for moving options for SPL build because SPL related options (mostly prefixed with CONFIG_SPL_) are - sometimes blocked by CONFIG_SPL_BUILD ifdef conditionals. + sometimes blocked by CONFIG_XPL_BUILD ifdef conditionals.
-j, --jobs Specify the number of threads to run simultaneously. If not specified, diff --git a/doc/develop/tests_sandbox.rst b/doc/develop/tests_sandbox.rst index 72923070150..0630180bc55 100644 --- a/doc/develop/tests_sandbox.rst +++ b/doc/develop/tests_sandbox.rst @@ -278,7 +278,7 @@ Whatever sandbox build is used, which tests are present is determined by which source files are built. For sandbox_spl, the of_platdata tests are built because of the build rule in test/dm/Makefile::
- ifeq ($(CONFIG_SPL_BUILD),y) + ifeq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_SPL_OF_PLATDATA) += of_platdata.o else ...other tests for non-spl diff --git a/drivers/Makefile b/drivers/Makefile index 1acd94f3c17..1b7db812828 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -47,7 +47,7 @@ obj-y += bus/
ifndef CONFIG_TPL_BUILD ifndef CONFIG_VPL_BUILD -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD
obj-$(CONFIG_SPL_CPU) += cpu/ obj-$(CONFIG_SPL_CRYPTO) += crypto/ @@ -80,7 +80,7 @@ obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR) += ddr/fsl/
endif
-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),)
obj-y += ata/ obj-$(CONFIG_DM_DEMO) += demo/ diff --git a/drivers/block/Makefile b/drivers/block/Makefile index fe6a1fcf486..a551591fc91 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -9,7 +9,7 @@ ifndef CONFIG_$(SPL_)BLK obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o endif
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_IDE) += ide.o obj-$(CONFIG_RKMTD) += rkmtd.o endif diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 0802b9666bf..e14cb7fd9c7 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -3,7 +3,7 @@ # Makefile for the bus drivers. #
-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),) obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o endif diff --git a/drivers/clk/altera/clk-agilex.c b/drivers/clk/altera/clk-agilex.c index bdc7be0fb5d..e1ddd02f356 100644 --- a/drivers/clk/altera/clk-agilex.c +++ b/drivers/clk/altera/clk-agilex.c @@ -242,7 +242,7 @@ static void clk_basic_init(struct udevice *dev, if (!cfg) return;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Always force clock manager into boot mode before any configuration */ clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); diff --git a/drivers/clk/altera/clk-agilex5.c b/drivers/clk/altera/clk-agilex5.c index 72b923465df..716c71598bc 100644 --- a/drivers/clk/altera/clk-agilex5.c +++ b/drivers/clk/altera/clk-agilex5.c @@ -263,7 +263,7 @@ static void clk_basic_init(struct udevice *dev, clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) & ~CLKMGR_CTRL_BOOTMODE); } else { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Always force clock manager into boot mode before any configuration */ clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); diff --git a/drivers/clk/altera/clk-n5x.c b/drivers/clk/altera/clk-n5x.c index 3e256101a94..09db250ab6d 100644 --- a/drivers/clk/altera/clk-n5x.c +++ b/drivers/clk/altera/clk-n5x.c @@ -52,7 +52,7 @@ static void clk_basic_init(struct udevice *dev, if (!cfg) return;
-#if IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) /* Always force clock manager into boot mode before any configuration */ clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c index 16169dac234..a9937c22dcb 100644 --- a/drivers/clk/clk-uclass.c +++ b/drivers/clk/clk-uclass.c @@ -378,7 +378,7 @@ int clk_set_defaults(struct udevice *dev, enum clk_defaults_stage stage) * However, still set them for SPL. And still set them if explicitly * asked. */ - if (!(IS_ENABLED(CONFIG_SPL_BUILD) || (gd->flags & GD_FLG_RELOC))) + if (!(IS_ENABLED(CONFIG_XPL_BUILD) || (gd->flags & GD_FLG_RELOC))) if (stage != CLK_DEFAULTS_POST_FORCE) return 0;
diff --git a/drivers/clk/clk_vexpress_osc.c b/drivers/clk/clk_vexpress_osc.c index 2e0e7bbe68f..85ac92c908a 100644 --- a/drivers/clk/clk_vexpress_osc.c +++ b/drivers/clk/clk_vexpress_osc.c @@ -37,7 +37,7 @@ static ulong vexpress_osc_clk_get_rate(struct clk *clk) return data; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong vexpress_osc_clk_set_rate(struct clk *clk, ulong rate) { int err; @@ -64,7 +64,7 @@ static ulong vexpress_osc_clk_set_rate(struct clk *clk, ulong rate)
static struct clk_ops vexpress_osc_clk_ops = { .get_rate = vexpress_osc_clk_get_rate, -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .set_rate = vexpress_osc_clk_set_rate, #endif }; diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c index b62b4646f4e..a8505f62bba 100644 --- a/drivers/clk/clk_zynq.c +++ b/drivers/clk/clk_zynq.c @@ -43,13 +43,13 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD enum zynq_clk_rclk {mio_clk, emio_clk}; #endif
struct zynq_clk_priv { ulong ps_clk_freq; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD struct clk gem_emio_clk[2]; #endif }; @@ -75,7 +75,7 @@ static void *zynq_clk_get_register(enum zynq_clk id) return &slcr_base->uart_clk_ctrl; case spi0_clk ... spi1_clk: return &slcr_base->spi_clk_ctrl; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case dci_clk: return &slcr_base->dci_clk_ctrl; case gem0_clk: @@ -150,7 +150,7 @@ static ulong zynq_clk_get_pll_rate(struct zynq_clk_priv *priv, enum zynq_clk id) return priv->ps_clk_freq * mul; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static enum zynq_clk_rclk zynq_clk_get_gem_rclk(enum zynq_clk id) { u32 clk_ctrl, srcsel; @@ -199,7 +199,7 @@ static ulong zynq_clk_get_cpu_rate(struct zynq_clk_priv *priv, enum zynq_clk id) return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, pll), div); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_ddr2x_rate(struct zynq_clk_priv *priv) { u32 clk_ctrl, div; @@ -223,7 +223,7 @@ static ulong zynq_clk_get_ddr3x_rate(struct zynq_clk_priv *priv) return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, ddrpll_clk), div); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_dci_rate(struct zynq_clk_priv *priv) { u32 clk_ctrl, div0, div1; @@ -251,7 +251,7 @@ static ulong zynq_clk_get_peripheral_rate(struct zynq_clk_priv *priv, if (!div0) div0 = 1;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (two_divs) { div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT; if (!div1) @@ -268,7 +268,7 @@ static ulong zynq_clk_get_peripheral_rate(struct zynq_clk_priv *priv, div1); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_gem_rate(struct zynq_clk_priv *priv, enum zynq_clk id) { struct clk *parent; @@ -366,7 +366,7 @@ static ulong zynq_clk_set_gem_rate(struct zynq_clk_priv *priv, enum zynq_clk id, } #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_rate(struct clk *clk) { struct zynq_clk_priv *priv = dev_get_priv(clk->dev); @@ -502,7 +502,7 @@ static void zynq_clk_dump(struct udevice *dev)
static struct clk_ops zynq_clk_ops = { .get_rate = zynq_clk_get_rate, -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .set_rate = zynq_clk_set_rate, #endif .enable = dummy_enable, @@ -514,7 +514,7 @@ static struct clk_ops zynq_clk_ops = { static int zynq_clk_probe(struct udevice *dev) { struct zynq_clk_priv *priv = dev_get_priv(dev); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD unsigned int i; char name[16]; int ret; diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c index a91c6767fac..bb6958f0ec2 100644 --- a/drivers/clk/imx/clk-imx8mm.c +++ b/drivers/clk/imx/clk-imx8mm.c @@ -31,7 +31,7 @@ static const char * const imx8mm_ahb_sels[] = {"clock-osc-24m", "sys_pll1_133m", "sys_pll1_400m", "sys_pll2_125m", "sys_pll3_out", "audio_pll1_out", "video_pll1_out", };
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mm_enet_axi_sels[] = {"clock-osc-24m", "sys_pll1_266m", "sys_pll1_800m", "sys_pll2_250m", "sys_pll2_200m", "audio_pll1_out", "video_pll1_out", "sys_pll3_out", }; @@ -95,7 +95,7 @@ static const char * const imx8mm_pcie1_aux_sels[] = {"clock-osc-24m", "sys_pll2_ "sys_pll1_160m", "sys_pll1_200m", }; #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mm_pwm1_sels[] = {"clock-osc-24m", "sys_pll2_100m", "sys_pll1_160m", "sys_pll1_40m", "sys_pll3_out", "clk_ext1", "sys_pll1_80m", "video_pll1_out", }; @@ -357,7 +357,7 @@ static int imx8mm_clk_probe(struct udevice *dev) imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0));
/* clks not needed in SPL stage */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD clk_dm(IMX8MM_CLK_ENET_AXI, imx8m_clk_composite("enet_axi", imx8mm_enet_axi_sels, base + 0x8880)); diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c index 125215e84f4..be15ebd0e25 100644 --- a/drivers/clk/imx/clk-imx8mn.c +++ b/drivers/clk/imx/clk-imx8mn.c @@ -37,7 +37,7 @@ static const char * const imx8mn_enet_axi_sels[] = {"clock-osc-24m", "sys_pll1_2 "sys_pll2_250m", "sys_pll2_200m", "audio_pll1_out", "video_pll_out", "sys_pll3_out", };
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mn_enet_ref_sels[] = {"clock-osc-24m", "sys_pll2_125m", "sys_pll2_50m", "sys_pll2_100m", "sys_pll1_160m", "audio_pll1_out", "video_pll_out", "clk_ext4", }; @@ -97,7 +97,7 @@ static const char * const imx8mn_i2c4_sels[] = {"clock-osc-24m", "sys_pll1_160m" "sys_pll3_out", "audio_pll1_out", "video_pll_out", "audio_pll2_out", "sys_pll1_133m", };
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mn_pwm1_sels[] = {"clock-osc-24m", "sys_pll2_100m", "sys_pll1_160m", "sys_pll1_40m", "sys_pll3_out", "clk_ext1", "sys_pll1_80m", "video_pll_out", }; @@ -359,7 +359,7 @@ static int imx8mn_clk_probe(struct udevice *dev) imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0));
/* clks not needed in SPL stage */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD clk_dm(IMX8MN_CLK_ENET_REF, imx8m_clk_composite("enet_ref", imx8mn_enet_ref_sels, base + 0xa980)); diff --git a/drivers/clk/imx/clk-imxrt1020.c b/drivers/clk/imx/clk-imxrt1020.c index c80b02975aa..752434cb0ad 100644 --- a/drivers/clk/imx/clk-imxrt1020.c +++ b/drivers/clk/imx/clk-imxrt1020.c @@ -124,7 +124,7 @@ static int imxrt1020_clk_probe(struct udevice *dev) clk_dm(IMXRT1020_CLK_SEMC, imx_clk_gate2("semc", "semc_podf", base + 0x74, 4));
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct clk *clk, *clk1;
clk_get_by_id(IMXRT1020_CLK_SEMC_SEL, &clk1); diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c index 754f3948427..788e0650a92 100644 --- a/drivers/clk/imx/clk-imxrt1050.c +++ b/drivers/clk/imx/clk-imxrt1050.c @@ -180,7 +180,7 @@ static int imxrt1050_clk_probe(struct udevice *dev)
struct clk *clk, *clk1;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* bypass pll1 before setting its rate */ clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk); clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1); diff --git a/drivers/clk/rockchip/clk_px30.c b/drivers/clk/rockchip/clk_px30.c index d7825c66493..22ede1c38a8 100644 --- a/drivers/clk/rockchip/clk_px30.c +++ b/drivers/clk/rockchip/clk_px30.c @@ -989,7 +989,7 @@ static ulong px30_peri_set_clk(struct px30_clk_priv *priv, ulong clk_id, return px30_peri_get_clk(priv, clk_id); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong px30_crypto_get_clk(struct px30_clk_priv *priv, ulong clk_id) { struct px30_cru *cru = priv->cru; @@ -1261,7 +1261,7 @@ static ulong px30_clk_get_rate(struct clk *clk) case HCLK_PERI_PRE: rate = px30_peri_get_clk(priv, clk->id); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case SCLK_CRYPTO: case SCLK_CRYPTO_APK: rate = px30_crypto_get_clk(priv, clk->id); @@ -1345,7 +1345,7 @@ static ulong px30_clk_set_rate(struct clk *clk, ulong rate) case HCLK_PERI_PRE: ret = px30_peri_set_clk(priv, clk->id, rate); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case SCLK_CRYPTO: case SCLK_CRYPTO_APK: ret = px30_crypto_set_clk(priv, clk->id, rate); diff --git a/drivers/clk/rockchip/clk_rk3188.c b/drivers/clk/rockchip/clk_rk3188.c index f569a100f22..d8b03e1d7ab 100644 --- a/drivers/clk/rockchip/clk_rk3188.c +++ b/drivers/clk/rockchip/clk_rk3188.c @@ -80,7 +80,7 @@ enum { "divisors on line " __stringify(__LINE__));
/* Keep divisors as low as possible to reduce jitter and power usage */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2); static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2); #endif @@ -371,7 +371,7 @@ static ulong rockchip_spi_set_clk(struct rk3188_cru *cru, uint gclk_rate, return rockchip_spi_get_clk(cru, gclk_rate, periph); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf, bool has_bwadj) { @@ -557,7 +557,7 @@ static int rk3188_clk_probe(struct udevice *dev) return PTR_ERR(priv->grf); priv->has_bwadj = (type == RK3188A_CRU) ? 1 : 0;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #if CONFIG_IS_ENABLED(OF_PLATDATA) struct rk3188_clk_plat *plat = dev_get_plat(dev);
diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c index 432a79291c8..43c44fadbe7 100644 --- a/drivers/clk/rockchip/clk_rk3288.c +++ b/drivers/clk/rockchip/clk_rk3288.c @@ -223,7 +223,7 @@ static int rkclk_configure_ddr(struct rockchip_cru *cru, struct rk3288_grf *grf, return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define VCO_MAX_KHZ 2200000 #define VCO_MIN_KHZ 440000 #define FREF_MAX_KHZ 2200000 @@ -421,7 +421,7 @@ static ulong rockchip_i2s_set_clk(struct rockchip_cru *cru, uint gclk_rate,
return rockchip_i2s_get_clk(cru, gclk_rate); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
static void rkclk_init(struct rockchip_cru *cru, struct rk3288_grf *grf) { @@ -819,7 +819,7 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate) case SCLK_SPI2: new_rate = rockchip_spi_set_clk(cru, gclk_rate, clk->id, rate); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case SCLK_I2S0: new_rate = rockchip_i2s_set_clk(cru, gclk_rate, rate); break; @@ -973,7 +973,7 @@ static int rk3288_clk_probe(struct udevice *dev) priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); if (IS_ERR(priv->grf)) return PTR_ERR(priv->grf); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #if CONFIG_IS_ENABLED(OF_PLATDATA) struct rk3288_clk_plat *plat = dev_get_plat(dev);
diff --git a/drivers/clk/rockchip/clk_rk3328.c b/drivers/clk/rockchip/clk_rk3328.c index 9137dbe69ce..7701a9734ee 100644 --- a/drivers/clk/rockchip/clk_rk3328.c +++ b/drivers/clk/rockchip/clk_rk3328.c @@ -582,7 +582,7 @@ static ulong rk3328_spi_set_clk(struct rk3328_cru *cru, uint hz) return rk3328_spi_get_clk(cru); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3328_vop_get_clk(struct rk3328_clk_priv *priv, ulong clk_id) { struct rk3328_cru *cru = priv->cru; @@ -746,7 +746,7 @@ static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate) case SCLK_SPI: ret = rk3328_spi_set_clk(priv->cru, rate); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case DCLK_LCDC: case ACLK_VOP_PRE: case ACLK_VIO_PRE: diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c index d8943980521..630253fbb1d 100644 --- a/drivers/clk/rockchip/clk_rk3368.c +++ b/drivers/clk/rockchip/clk_rk3368.c @@ -50,7 +50,7 @@ struct pll_div { (_nr * _no) == hz, #hz "Hz cannot be hit with PLL " \ "divisors on line " __stringify(__LINE__));
-#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static const struct pll_div apll_l_init_cfg = PLL_DIVISORS(APLL_L_HZ, 12, 2); static const struct pll_div apll_b_init_cfg = PLL_DIVISORS(APLL_B_HZ, 1, 2); #if !defined(CONFIG_TPL_BUILD) @@ -88,7 +88,7 @@ static uint32_t rkclk_pll_get_rate(struct rk3368_cru *cru, } }
-#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, const struct pll_div *div) { @@ -130,7 +130,7 @@ static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, } #endif
-#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static void rkclk_init(struct rk3368_cru *cru) { u32 apllb, aplll, dpll, cpll, gpll; @@ -157,7 +157,7 @@ static void rkclk_init(struct rk3368_cru *cru) } #endif
-#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC) +#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC) static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) { u32 div, con, con_id, rate; @@ -469,7 +469,7 @@ static ulong rk3368_clk_get_rate(struct clk *clk) case SCLK_SPI0 ... SCLK_SPI2: rate = rk3368_spi_get_clk(priv->cru, clk->id); break; -#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC) +#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC) case HCLK_SDMMC: case HCLK_EMMC: rate = rk3368_mmc_get_clk(priv->cru, clk->id); @@ -500,7 +500,7 @@ static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate) ret = rk3368_ddr_set_clk(priv->cru, rate); break; #endif -#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC) +#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC) case HCLK_SDMMC: case HCLK_EMMC: ret = rk3368_mmc_set_clk(clk, rate); @@ -586,7 +586,7 @@ static int rk3368_clk_probe(struct udevice *dev)
priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); #endif -#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) rkclk_init(priv->cru); #endif
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 89924041299..155ea8d6353 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -56,7 +56,7 @@ struct pll_div {
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1); static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2); -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1); #endif
@@ -1464,7 +1464,7 @@ static int rk3399_clk_probe(struct udevice *dev) priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); #endif
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) init_clocks = true; #elif CONFIG_IS_ENABLED(HANDOFF) if (!(gd->flags & GD_FLG_RELOC)) { @@ -1658,7 +1658,7 @@ static struct clk_ops rk3399_pmuclk_ops = { .set_rate = rk3399_pmuclk_set_rate, };
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static void pmuclk_init(struct rk3399_pmucru *pmucru) { u32 pclk_div; @@ -1676,7 +1676,7 @@ static void pmuclk_init(struct rk3399_pmucru *pmucru)
static int rk3399_pmuclk_probe(struct udevice *dev) { -#if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_XPL_BUILD) struct rk3399_pmuclk_priv *priv = dev_get_priv(dev); #endif
@@ -1686,7 +1686,7 @@ static int rk3399_pmuclk_probe(struct udevice *dev) priv->pmucru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD pmuclk_init(priv->pmucru); #endif return 0; diff --git a/drivers/clk/rockchip/clk_rk3568.c b/drivers/clk/rockchip/clk_rk3568.c index 35563509d61..977699d509d 100644 --- a/drivers/clk/rockchip/clk_rk3568.c +++ b/drivers/clk/rockchip/clk_rk3568.c @@ -91,7 +91,7 @@ static struct rockchip_pll_clock rk3568_pll_clks[] = { RK3568_PMU_MODE, 2, 10, 0, rk3568_pll_rates), };
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3568_pmu_pll_set_rate(struct rk3568_clk_priv *priv, ulong pll_id, ulong rate) @@ -1707,7 +1707,7 @@ static ulong rk3568_emmc_set_bclk(struct rk3568_clk_priv *priv, ulong rate) return rk3568_emmc_get_bclk(priv); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3568_aclk_vop_get_clk(struct rk3568_clk_priv *priv) { struct rk3568_cru *cru = priv->cru; @@ -2413,7 +2413,7 @@ static ulong rk3568_clk_get_rate(struct clk *clk) case TCLK_EMMC: rate = OSC_HZ; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case ACLK_VOP: rate = rk3568_aclk_vop_get_clk(priv); break; @@ -2594,7 +2594,7 @@ static ulong rk3568_clk_set_rate(struct clk *clk, ulong rate) case TCLK_EMMC: ret = OSC_HZ; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case ACLK_VOP: ret = rk3568_aclk_vop_set_clk(priv, rate); break; @@ -2894,7 +2894,7 @@ static void rk3568_clk_init(struct rk3568_clk_priv *priv) priv->gpll_hz = GPLL_HZ; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD ret = rk3568_bus_set_clk(priv, ACLK_BUS, 150000000); if (ret < 0) printf("Fail to set the ACLK_BUS clock.\n"); diff --git a/drivers/clk/rockchip/clk_rk3588.c b/drivers/clk/rockchip/clk_rk3588.c index db1384dacd2..6042fc10cdb 100644 --- a/drivers/clk/rockchip/clk_rk3588.c +++ b/drivers/clk/rockchip/clk_rk3588.c @@ -65,7 +65,7 @@ static struct rockchip_pll_clock rk3588_pll_clks[] = { RK3588_MODE_CON0, 0, 15, 0, rk3588_pll_rates), [PPLL] = PLL(pll_rk3588, PLL_PPLL, RK3588_PMU_PLL_CON(128), RK3588_MODE_CON0, 10, 15, 0, rk3588_pll_rates), -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * The SPLL is part of the SBUSCRU, not the main CRU and as * such only directly accessible during the SPL stage. @@ -76,7 +76,7 @@ static struct rockchip_pll_clock rk3588_pll_clks[] = {
};
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * * rational_best_approximation(31415, 10000, @@ -875,7 +875,7 @@ static ulong rk3588_mmc_set_clk(struct rk3588_clk_priv *priv, return rk3588_mmc_get_clk(priv, clk_id); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3588_aux16m_get_clk(struct rk3588_clk_priv *priv, ulong clk_id) { struct rk3588_cru *cru = priv->cru; @@ -1600,7 +1600,7 @@ static ulong rk3588_clk_get_rate(struct clk *clk) case CLK_GPU: rate = 200000000; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case CLK_AUX16M_0: case CLK_AUX16M_1: rate = rk3588_aux16m_get_clk(priv, clk->id); @@ -1760,7 +1760,7 @@ static ulong rk3588_clk_set_rate(struct clk *clk, ulong rate) case CLK_150M_SRC: ret = 0; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case CLK_AUX16M_0: case CLK_AUX16M_1: ret = rk3588_aux16m_set_clk(priv, clk->id, rate); @@ -1965,7 +1965,7 @@ static int rk3588_clk_probe(struct udevice *dev)
priv->sync_kernel = false;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD rockchip_pll_set_rate(&rk3588_pll_clks[B0PLL], priv->cru, B0PLL, LPLL_HZ); rockchip_pll_set_rate(&rk3588_pll_clks[B1PLL], priv->cru, @@ -2051,7 +2051,7 @@ U_BOOT_DRIVER(rockchip_rk3588_cru) = { .probe = rk3588_clk_probe, };
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SCRU_BASE 0xfd7d0000 #define SBUSCRU_BASE 0xfd7d8000
diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c index aa26d3a109b..de55504b5c9 100644 --- a/drivers/clk/sifive/sifive-prci.c +++ b/drivers/clk/sifive/sifive-prci.c @@ -670,7 +670,7 @@ static int sifive_prci_probe(struct udevice *dev) __prci_wrpll_read_cfg0(pd, pc->pwd); }
- if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { if (device_is_compatible(dev, "sifive,fu740-c000-prci")) { u32 prci_pll_reg; unsigned long parent_rate; diff --git a/drivers/clk/starfive/clk-jh7110-pll.c b/drivers/clk/starfive/clk-jh7110-pll.c index 581035842fc..6d2bfb3ecb7 100644 --- a/drivers/clk/starfive/clk-jh7110-pll.c +++ b/drivers/clk/starfive/clk-jh7110-pll.c @@ -348,10 +348,10 @@ struct clk *starfive_jh7110_pll(const char *name, const char *parent_name, return ERR_PTR(ret); }
- if (IS_ENABLED(CONFIG_SPL_BUILD) && pll->type == PLL0) + if (IS_ENABLED(CONFIG_XPL_BUILD) && pll->type == PLL0) jh7110_pllx_set_rate(clk, 1000000000);
- if (IS_ENABLED(CONFIG_SPL_BUILD) && pll->type == PLL2) + if (IS_ENABLED(CONFIG_XPL_BUILD) && pll->type == PLL2) jh7110_pllx_set_rate(clk, 1188000000);
return clk; diff --git a/drivers/clk/stm32/clk-stm32mp1.c b/drivers/clk/stm32/clk-stm32mp1.c index 204ac170531..4044edfb768 100644 --- a/drivers/clk/stm32/clk-stm32mp1.c +++ b/drivers/clk/stm32/clk-stm32mp1.c @@ -26,7 +26,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) /* activate clock tree initialization in the driver */ #define STM32MP1_CLOCK_TREE_INIT #endif @@ -2279,7 +2279,7 @@ static int stm32mp1_clk_probe(struct udevice *dev) dev_err(dev, "clock tree initialization failed (%d)\n", result); #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if defined(VERBOSE_DEBUG) /* display debug information for probe after relocation */ if (gd->flags & GD_FLG_RELOC) @@ -2314,7 +2314,7 @@ static const struct clk_ops stm32mp1_clk_ops = { .disable = stm32mp1_clk_disable, .get_rate = stm32mp1_clk_get_rate, .set_rate = stm32mp1_clk_set_rate, -#if IS_ENABLED(CONFIG_CMD_CLK) && !IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_CMD_CLK) && !IS_ENABLED(CONFIG_XPL_BUILD) .dump = stm32mp1_clk_dump, #endif }; diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c index 7e3b3719d18..129b34a5cd2 100644 --- a/drivers/core/ofnode.c +++ b/drivers/core/ofnode.c @@ -611,7 +611,7 @@ int ofnode_read_u32_array(ofnode node, const char *propname, out_values, sz);
/* get the error right, but space is more important in SPL */ - if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { if (ret == -FDT_ERR_NOTFOUND) return -EINVAL; else if (ret == -FDT_ERR_BADLAYOUT) @@ -1468,7 +1468,7 @@ int ofnode_read_simple_size_cells(ofnode node)
bool ofnode_pre_reloc(ofnode node) { -#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_TPL_BUILD) +#if defined(CONFIG_XPL_BUILD) || defined(CONFIG_TPL_BUILD) /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass * had property bootph-all or bootph-pre-sram/bootph-pre-ram. * They are removed in final dtb (fdtgrep 2nd pass) diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c index 55191736931..9c4ff4960fc 100644 --- a/drivers/crypto/fsl/jobdesc.c +++ b/drivers/crypto/fsl/jobdesc.c @@ -207,7 +207,7 @@ void inline_cnstr_jobdesc_hash(uint32_t *desc, append_store(desc, dma_addr_out, storelen, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD void inline_cnstr_jobdesc_blob_encap(uint32_t *desc, uint8_t *key_idnfr, uint8_t *plain_txt, uint8_t *enc_blob, uint32_t in_sz) diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index 27e24808946..c45481bef0b 100644 --- a/drivers/crypto/fsl/jr.c +++ b/drivers/crypto/fsl/jr.c @@ -713,7 +713,7 @@ int sec_init_idx(uint8_t sec_idx)
ccsr_sec_t *sec = caam->sec; uint32_t mcr = sec_in32(&sec->mcfgr); -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX8M) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_IMX8M) uint32_t jrdid_ms = 0; #endif #ifdef CONFIG_FSL_CORENET @@ -745,14 +745,14 @@ int sec_init_idx(uint8_t sec_idx) mcr |= (1 << MCFGR_PS_SHIFT); #endif sec_out32(&sec->mcfgr, mcr); -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX8M) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_IMX8M) jrdid_ms = JRDID_MS_TZ_OWN | JRDID_MS_PRIM_TZ | JRDID_MS_PRIM_DID; sec_out32(&sec->jrliodnr[caam->jrid].ms, jrdid_ms); #endif jr_reset();
#ifdef CONFIG_FSL_CORENET -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * For SPL Build, Set the Liodns in SEC JR0 for * creating PAMU entries corresponding to these. diff --git a/drivers/ddr/altera/sdram_gen5.c b/drivers/ddr/altera/sdram_gen5.c index 46c53e7c7a3..3c79bb11802 100644 --- a/drivers/ddr/altera/sdram_gen5.c +++ b/drivers/ddr/altera/sdram_gen5.c @@ -20,7 +20,7 @@
#include "sequencer.h"
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
struct altera_gen5_sdram_priv { struct ram_info info; @@ -651,4 +651,4 @@ U_BOOT_DRIVER(altera_gen5_sdram) = { .priv_auto = sizeof(struct altera_gen5_sdram_priv), };
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c index cc128112e4f..9c5b108267a 100644 --- a/drivers/ddr/fsl/lc_common_dimm_params.c +++ b/drivers/ddr/fsl/lc_common_dimm_params.c @@ -409,18 +409,18 @@ compute_lowest_common_dimm_parameters(const unsigned int ctrl_num, if (dimm_params[i].n_ranks) { if (dimm_params[i].registered_dimm) { temp1 = 1; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("Detected RDIMM %s\n", dimm_params[i].mpart); #endif } else { temp2 = 1; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("Detected UDIMM %s\n", dimm_params[i].mpart); #endif } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); #endif } diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index 888dfb7ff33..d59e94779ff 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -863,16 +863,16 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) if ((first_ctrl == 0) && (total_memory - 1 > (phys_size_t)~0ULL)) { puts("Detected "); print_size(total_memory, " of memory\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); /* re-align to match init_dram print */ #endif puts("This U-Boot only supports <= "); print_size((unsigned long long)((phys_size_t)~0ULL)+1, " of DDR\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); /* re-align to match init_dram print */ #endif puts("You could rebuild it with CONFIG_PHYS_64BIT\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); /* re-align to match init_dram print */ #endif } diff --git a/drivers/ddr/imx/imx8m/Makefile b/drivers/ddr/imx/imx8m/Makefile index aed91dc23f4..883e6e1b0d7 100644 --- a/drivers/ddr/imx/imx8m/Makefile +++ b/drivers/ddr/imx/imx8m/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX8M_DRAM) += ddr_init.o obj-y += ../phy/ endif diff --git a/drivers/ddr/imx/imx8ulp/Makefile b/drivers/ddr/imx/imx8ulp/Makefile index 7f44a92180f..4f2ad32351c 100644 --- a/drivers/ddr/imx/imx8ulp/Makefile +++ b/drivers/ddr/imx/imx8ulp/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX8ULP_DRAM) += ddr_init.o endif diff --git a/drivers/ddr/imx/imx9/Makefile b/drivers/ddr/imx/imx9/Makefile index 9403f988b32..6c9506055b8 100644 --- a/drivers/ddr/imx/imx9/Makefile +++ b/drivers/ddr/imx/imx9/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX9_DRAM) += ddr_init.o obj-y += ../phy/ endif diff --git a/drivers/ddr/imx/phy/Makefile b/drivers/ddr/imx/phy/Makefile index bb3d4ee5b74..592d0c6ebad 100644 --- a/drivers/ddr/imx/phy/Makefile +++ b/drivers/ddr/imx/phy/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ #
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX_SNPS_DDR_PHY) += helper.o ddrphy_utils.o ddrphy_train.o ddrphy_csr.o endif diff --git a/drivers/ddr/marvell/a38x/Makefile b/drivers/ddr/marvell/a38x/Makefile index 4e8a9d190d7..f49d009920e 100644 --- a/drivers/ddr/marvell/a38x/Makefile +++ b/drivers/ddr/marvell/a38x/Makefile @@ -1,29 +1,29 @@ # SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_SPL_BUILD) += mv_ddr_plat.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_sys_env_lib.o -obj-$(CONFIG_SPL_BUILD) += ddr3_debug.o -obj-$(CONFIG_SPL_BUILD) += ddr3_init.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_bist.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_centralization.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_db.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_hw_algo.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_ip_engine.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_leveling.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_pbs.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_build_message.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_common.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_spd.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_topology.o -obj-$(CONFIG_SPL_BUILD) += xor.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_plat.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_sys_env_lib.o +obj-$(CONFIG_XPL_BUILD) += ddr3_debug.o +obj-$(CONFIG_XPL_BUILD) += ddr3_init.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_bist.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_centralization.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_db.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_hw_algo.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_ip_engine.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_leveling.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_pbs.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_build_message.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_common.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_spd.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_topology.o +obj-$(CONFIG_XPL_BUILD) += xor.o
obj-$(CONFIG_ARMADA_38X_SUPPORT_OLD_DDR3_TRAINING) += old/
ifdef CONFIG_DDR4 - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_mpr_pda_if.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_calibration.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_db.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_leveling.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_mpr_pda_if.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training_calibration.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training_db.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training_leveling.o endif diff --git a/drivers/ddr/marvell/a38x/old/Makefile b/drivers/ddr/marvell/a38x/old/Makefile index 1645a79b405..c9bc746cc2b 100644 --- a/drivers/ddr/marvell/a38x/old/Makefile +++ b/drivers/ddr/marvell/a38x/old/Makefile @@ -2,20 +2,20 @@ # SPDX-License-Identifier: GPL-2.0+ #
-obj-$(CONFIG_SPL_BUILD) += ddr3_a38x.o -obj-$(CONFIG_SPL_BUILD) += ddr3_a38x_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_debug.o -obj-$(CONFIG_SPL_BUILD) += ddr3_hws_hw_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_init.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_bist.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_centralization.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_db.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_hw_algo.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_ip_engine.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_leveling.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_pbs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_static.o +obj-$(CONFIG_XPL_BUILD) += ddr3_a38x.o +obj-$(CONFIG_XPL_BUILD) += ddr3_a38x_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_debug.o +obj-$(CONFIG_XPL_BUILD) += ddr3_hws_hw_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_init.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_bist.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_centralization.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_db.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_hw_algo.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_ip_engine.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_leveling.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_pbs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_static.o
define IncludeSymbolRename CFLAGS_$(1) = -include $(srctree)/drivers/ddr/marvell/a38x/old/glue_symbol_renames.h diff --git a/drivers/ddr/marvell/axp/Makefile b/drivers/ddr/marvell/axp/Makefile index d04d9a21db2..01e427296e6 100644 --- a/drivers/ddr/marvell/axp/Makefile +++ b/drivers/ddr/marvell/axp/Makefile @@ -1,12 +1,12 @@ # SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_SPL_BUILD) += ddr3_dfs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_dqs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_hw_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_init.o -obj-$(CONFIG_SPL_BUILD) += ddr3_pbs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_read_leveling.o -obj-$(CONFIG_SPL_BUILD) += ddr3_sdram.o -obj-$(CONFIG_SPL_BUILD) += ddr3_spd.o -obj-$(CONFIG_SPL_BUILD) += ddr3_write_leveling.o -obj-$(CONFIG_SPL_BUILD) += xor.o +obj-$(CONFIG_XPL_BUILD) += ddr3_dfs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_dqs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_hw_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_init.o +obj-$(CONFIG_XPL_BUILD) += ddr3_pbs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_read_leveling.o +obj-$(CONFIG_XPL_BUILD) += ddr3_sdram.o +obj-$(CONFIG_XPL_BUILD) += ddr3_spd.o +obj-$(CONFIG_XPL_BUILD) += ddr3_write_leveling.o +obj-$(CONFIG_XPL_BUILD) += xor.o diff --git a/drivers/firmware/firmware-zynqmp.c b/drivers/firmware/firmware-zynqmp.c index f99507d86c6..4b1b80d7abe 100644 --- a/drivers/firmware/firmware-zynqmp.c +++ b/drivers/firmware/firmware-zynqmp.c @@ -260,7 +260,7 @@ int zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) int err; u32 ret_payload[PAYLOAD_ARG_CNT];
- if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) printf("Loading new PMUFW cfg obj (%ld bytes)\n", size);
flush_dcache_range((ulong)cfg_obj, (ulong)(cfg_obj + size)); @@ -282,7 +282,7 @@ int zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) if (ret_payload[0]) printf("PMUFW returned 0x%08x status!\n", ret_payload[0]);
- if ((err || ret_payload[0]) && IS_ENABLED(CONFIG_SPL_BUILD)) + if ((err || ret_payload[0]) && IS_ENABLED(CONFIG_XPL_BUILD)) panic("PMUFW config object loading failed in EL3\n");
return 0; @@ -354,7 +354,7 @@ int __maybe_unused xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, debug("%s at EL%d, API ID: 0x%0x, 0x%0x, 0x%0x, 0x%0x, 0x%0x\n", __func__, current_el(), api_id, arg0, arg1, arg2, arg3);
- if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { #if defined(CONFIG_ZYNQMP_IPI) /* * Use fixed payload and arg size as the EL2 call. The firmware @@ -416,10 +416,10 @@ static int zynqmp_firmware_bind(struct udevice *dev) int ret; struct udevice *child;
- if ((IS_ENABLED(CONFIG_SPL_BUILD) && + if ((IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_POWER_DOMAIN) && IS_ENABLED(CONFIG_ZYNQMP_POWER_DOMAIN)) || - (!IS_ENABLED(CONFIG_SPL_BUILD) && + (!IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_ZYNQMP_POWER_DOMAIN))) { ret = device_bind_driver_to_node(dev, "zynqmp_power_domain", "zynqmp_power_domain", diff --git a/drivers/fpga/intel_sdm_mb.c b/drivers/fpga/intel_sdm_mb.c index 45caef4f5c1..5a65bd98779 100644 --- a/drivers/fpga/intel_sdm_mb.c +++ b/drivers/fpga/intel_sdm_mb.c @@ -17,7 +17,7 @@ #define RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS 60000 #define RECONFIG_STATUS_INTERVAL_DELAY_US 1000000
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF)
#define BITSTREAM_CHUNK_SIZE 0xFFFF0 #define RECONFIG_STATUS_POLL_RETRY_MAX 100 diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c index 57467b4d975..3e86d854a01 100644 --- a/drivers/fpga/zynqpl.c +++ b/drivers/fpga/zynqpl.c @@ -414,13 +414,13 @@ static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize, if (bstype != BIT_PARTIAL) zynq_slcr_devcfg_enable();
- if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) puts("INFO:post config was not run, please run manually if needed\n");
return FPGA_SUCCESS; }
-#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_XPL_BUILD) static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize, fpga_fs_info *fsinfo) { @@ -504,7 +504,7 @@ static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,
struct xilinx_fpga_op zynq_op = { .load = zynq_load, -#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_XPL_BUILD) .loadfs = zynq_loadfs, #endif }; diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index da0faf05246..990a670dd7b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -3,7 +3,7 @@ # Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_DWAPB_GPIO) += dwapb_gpio.o obj-$(CONFIG_AXP_GPIO) += axp_gpio.o obj-$(CONFIG_DM_74X164) += 74x164_gpio.o diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index 92ce68dd4a1..0213271e3a6 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -412,7 +412,7 @@ int dm_gpio_request(struct gpio_desc *desc, const char *label)
static int dm_gpio_requestf(struct gpio_desc *desc, const char *fmt, ...) { -#if !defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) +#if !defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) va_list args; char buf[40];
@@ -461,7 +461,7 @@ int gpio_request(unsigned gpio, const char *label) */ int gpio_requestf(unsigned gpio, const char *fmt, ...) { -#if !defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) +#if !defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) va_list args; char buf[40];
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index fc4dcf9f986..2fb14590c0f 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -143,7 +143,7 @@ int pca953x_get_val(uint8_t chip) return (int)val; }
-#if defined(CONFIG_CMD_PCA953X) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_PCA953X) && !defined(CONFIG_XPL_BUILD) /* * Display pca953x information */ diff --git a/drivers/gpio/rk_gpio.c b/drivers/gpio/rk_gpio.c index 24ba12dd820..57c49c75939 100644 --- a/drivers/gpio/rk_gpio.c +++ b/drivers/gpio/rk_gpio.c @@ -126,7 +126,7 @@ static int rockchip_gpio_get_function(struct udevice *dev, unsigned offset) }
/* Simple SPL interface to GPIOs */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
enum { PULL_NONE_1V8 = 0, @@ -169,7 +169,7 @@ int spl_gpio_output(void *vregs, uint gpio, int value)
return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
static int rockchip_gpio_probe(struct udevice *dev) { diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index 83e65aa4aec..53dbbe97b5a 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -92,7 +92,7 @@ static void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en) writel(value, &bank->dat); }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Common GPIO API - SPL does not support driver model yet */ int gpio_set_value(unsigned gpio, int value) { @@ -118,7 +118,7 @@ static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio) value = readl(&bank->dat); return !!(value & DAT_MASK(gpio)); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
static void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode) { @@ -185,7 +185,7 @@ int s5p_gpio_get_pin(unsigned gpio) }
/* Driver model interface */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* set GPIO pin 'gpio' as an input */ static int exynos_gpio_direction_input(struct udevice *dev, unsigned offset) { @@ -230,7 +230,7 @@ static int exynos_gpio_set_value(struct udevice *dev, unsigned offset,
return 0; } -#endif /* nCONFIG_SPL_BUILD */ +#endif /* nCONFIG_XPL_BUILD */
/* * There is no common GPIO API for pull, drv, pin, rate (yet). These @@ -260,7 +260,7 @@ void gpio_set_rate(int gpio, int mode) s5p_gpio_get_pin(gpio), mode); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int exynos_gpio_get_function(struct udevice *dev, unsigned offset) { struct exynos_bank_info *state = dev_get_priv(dev); diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index 218ca2af397..2ca4960f17a 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -245,7 +245,7 @@ int sunxi_name_to_gpio(const char *name) { unsigned int gpio; int ret; -#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO +#if !defined CONFIG_XPL_BUILD && defined CONFIG_AXP_GPIO char lookup[8];
if (strcasecmp(name, "AXP0-VBUS-ENABLE") == 0) { diff --git a/drivers/gpio/tca642x.c b/drivers/gpio/tca642x.c index 1d45b500746..8307a07e14e 100644 --- a/drivers/gpio/tca642x.c +++ b/drivers/gpio/tca642x.c @@ -164,7 +164,7 @@ int tca642x_set_inital_state(uchar chip, struct tca642x_bank_info init_data[]) return ret; }
-#if defined(CONFIG_CMD_TCA642X) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_TCA642X) && !defined(CONFIG_XPL_BUILD) /* * Display tca642x information */ diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c index 0c40d36c41e..6cafffaad92 100644 --- a/drivers/gpio/tegra_gpio.c +++ b/drivers/gpio/tegra_gpio.c @@ -323,7 +323,7 @@ static int gpio_tegra_bind(struct udevice *parent) return 0;
/* TODO(sjg@chromium.org): Remove once SPL supports device tree */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE; bank_count = TEGRA_GPIO_BANKS; #else diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 71f315adf6f..3e855346bce 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += key_matrix.o obj-$(CONFIG_$(SPL_TPL_)DM_KEYBOARD) += input.o keyboard-uclass.o obj-$(CONFIG_BUTTON_KEYBOARD) += button_kbd.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_APPLE_SPI_KEYB) += apple_spi_kbd.o obj-$(CONFIG_I8042_KEYB) += i8042.o diff --git a/drivers/mailbox/zynqmp-ipi.c b/drivers/mailbox/zynqmp-ipi.c index 4df69734ed9..713d93a200c 100644 --- a/drivers/mailbox/zynqmp-ipi.c +++ b/drivers/mailbox/zynqmp-ipi.c @@ -108,7 +108,7 @@ static int zynqmp_ipi_send(struct mbox_chan *chan, const void *data) writel(msg->buf[i], &mbx[i]);
/* Use SMC calls for Exception Level less than 3 where TF-A is available */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && current_el() < 3) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && current_el() < 3) { ret = zynqmp_ipi_fw_call(zynqmp, SMC_IPI_MAILBOX_NOTIFY, 0);
debug("%s, send %ld bytes\n", __func__, msg->len); @@ -148,7 +148,7 @@ static int zynqmp_ipi_recv(struct mbox_chan *chan, void *data) msg->buf[i] = readl(&mbx[i]);
/* Ack to remote if EL is not 3 */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && current_el() < 3) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && current_el() < 3) { ret = zynqmp_ipi_fw_call(zynqmp, SMC_IPI_MAILBOX_ACK, IPI_SMC_ACK_EIRQ_MASK); } @@ -168,7 +168,7 @@ static int zynqmp_ipi_dest_probe(struct udevice *dev)
node = dev_ofnode(dev);
- if (IS_ENABLED(CONFIG_SPL_BUILD) || of_machine_is_compatible("xlnx,zynqmp")) + if (IS_ENABLED(CONFIG_XPL_BUILD) || of_machine_is_compatible("xlnx,zynqmp")) zynqmp->el3_supported = true;
ret = dev_read_u32(dev->parent, "xlnx,ipi-id", &zynqmp->local_id); diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index e53d52c47b3..51ef51f1ed3 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_$(SPL_TPL_)CROS_EC) += cros_ec.o obj-$(CONFIG_$(SPL_TPL_)CROS_EC_SANDBOX) += cros_ec_sandbox.o obj-$(CONFIG_$(SPL_TPL_)CROS_EC_LPC) += cros_ec_lpc.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SANDBOX) += sandbox_adder.o obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o @@ -19,13 +19,13 @@ obj-$(CONFIG_SANDBOX) += swap_case.o endif
ifdef CONFIG_$(SPL_)DM_I2C -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o obj-$(CONFIG_USB_HUB_USB251XB) += usb251xb.o endif endif ifdef CONFIG_SPL_OF_PLATDATA -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SANDBOX) += spltest_sandbox.o endif endif diff --git a/drivers/misc/gsc.c b/drivers/misc/gsc.c index feb02f97065..dee0bdd9663 100644 --- a/drivers/misc/gsc.c +++ b/drivers/misc/gsc.c @@ -389,7 +389,7 @@ static int gsc_probe(struct udevice *dev) if (priv->rtc) dev_set_priv(priv->rtc, priv);
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD gsc_banner(dev); #endif
diff --git a/drivers/misc/imx8/scu.c b/drivers/misc/imx8/scu.c index bbd7e24200b..5d3db0bc4df 100644 --- a/drivers/misc/imx8/scu.c +++ b/drivers/misc/imx8/scu.c @@ -191,7 +191,7 @@ static int imx8_scu_probe(struct udevice *dev) if (addr == FDT_ADDR_T_NONE) return -EINVAL;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD plat->base = (struct mu_type *)CONFIG_MU_BASE_SPL; #else plat->base = (struct mu_type *)addr; diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 235c477c2e0..952201923d8 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -20,7 +20,7 @@ endif
obj-$(CONFIG_SUPPORT_EMMC_BOOT) += mmc_boot.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o endif
diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index 83cdc9fd66d..c8db4f811c2 100644 --- a/drivers/mmc/mmc-uclass.c +++ b/drivers/mmc/mmc-uclass.c @@ -301,7 +301,7 @@ struct mmc *find_mmc_device(int dev_num) ret = blk_find_device(UCLASS_MMC, dev_num, &dev);
if (ret) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("MMC Device %d not found\n", dev_num); #endif return NULL; @@ -373,7 +373,7 @@ void mmc_do_preinit(void) } }
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) void print_mmc_devices(char separator) { struct udevice *dev; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 96b0e20d669..55d24451e6e 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -328,7 +328,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms) break;
if (status & MMC_STATUS_MASK) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("Status Error: %#08x\n", status); #endif return -ECOMM; @@ -341,7 +341,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms) }
if (timeout_ms <= 0) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("Timeout waiting card ready\n"); #endif return -ETIMEDOUT; @@ -483,7 +483,7 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
if (blkcnt > 1) { if (mmc_send_stop_transmission(mmc, false)) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("mmc fail to send stop cmd\n"); #endif return 0; @@ -534,7 +534,7 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt, return 0;
if ((start + blkcnt) > block_dev->lba) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n", start + blkcnt, block_dev->lba); #endif @@ -2424,7 +2424,7 @@ static int mmc_startup_v4(struct mmc *mmc) mmc->capacity_gp[i] <<= 19; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (part_completed) { mmc->enh_user_size = (ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16) + @@ -2723,7 +2723,7 @@ static int mmc_startup(struct mmc *mmc) bdesc->blksz = mmc->read_bl_len; bdesc->log2blksz = LOG2(bdesc->blksz); bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len); -#if !defined(CONFIG_SPL_BUILD) || \ +#if !defined(CONFIG_XPL_BUILD) || \ (defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && \ !CONFIG_IS_ENABLED(USE_TINY_PRINTF)) sprintf(bdesc->vendor, "Man %06x Snr %04x%04x", @@ -2741,7 +2741,7 @@ static int mmc_startup(struct mmc *mmc) bdesc->revision[0] = 0; #endif
-#if !defined(CONFIG_DM_MMC) && (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)) +#if !defined(CONFIG_DM_MMC) && (!defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)) part_init(bdesc); #endif
@@ -2953,7 +2953,7 @@ retry: err = mmc_send_op_cond(mmc);
if (err) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) if (!quiet) log_err("Card did not respond to voltage select! : %d\n", err); @@ -3008,7 +3008,7 @@ int mmc_start_init(struct mmc *mmc) #endif if (no_card) { mmc->has_init = 0; -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("MMC: no card present\n"); #endif return -ENOMEDIUM; @@ -3195,7 +3195,7 @@ int mmc_initialize(struct bd_info *bis) if (ret) return ret;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD print_mmc_devices(','); #endif
diff --git a/drivers/mmc/mmc_legacy.c b/drivers/mmc/mmc_legacy.c index a87d2276c1b..8f8ba34be71 100644 --- a/drivers/mmc/mmc_legacy.c +++ b/drivers/mmc/mmc_legacy.c @@ -44,7 +44,7 @@ struct mmc *find_mmc_device(int dev_num) return m; }
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("MMC Device %d not found\n", dev_num); #endif
@@ -93,7 +93,7 @@ void mmc_list_add(struct mmc *mmc) list_add_tail(&mmc->link, &mmc_devices); }
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) void print_mmc_devices(char separator) { struct mmc *m; diff --git a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h index b32123758ea..fc45f017e5d 100644 --- a/drivers/mmc/mmc_private.h +++ b/drivers/mmc/mmc_private.h @@ -67,7 +67,7 @@ static inline ulong mmc_bwrite(struct blk_desc *block_dev, lbaint_t start, } #endif
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#ifdef CONFIG_MMC_TRACE void mmmc_trace_before_send(struct mmc *mmc, struct mmc_cmd *cmd); diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 8e51453d2ae..e66ab25d02a 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -59,8 +59,8 @@ DECLARE_GLOBAL_DATA_PTR;
/* simplify defines to OMAP_HSMMC_USE_GPIO */ -#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO)) +#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_XPL_BUILD)) || \ + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_GPIO)) #define OMAP_HSMMC_USE_GPIO #else #undef OMAP_HSMMC_USE_GPIO diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c index fb77b049834..ca5752d24f1 100644 --- a/drivers/mmc/rockchip_dw_mmc.c +++ b/drivers/mmc/rockchip_dw_mmc.c @@ -83,7 +83,7 @@ static int rockchip_dwmmc_of_to_plat(struct udevice *dev) return -EINVAL; priv->fifo_mode = dev_read_bool(dev, "fifo-mode");
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (!priv->fifo_mode) priv->fifo_mode = dev_read_bool(dev, "u-boot,spl-fifo-mode"); #endif diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c index 35667b86b50..a25bcaf017f 100644 --- a/drivers/mmc/rockchip_sdhci.c +++ b/drivers/mmc/rockchip_sdhci.c @@ -609,7 +609,7 @@ static int rockchip_sdhci_probe(struct udevice *dev) * Disable use of DMA and force use of PIO mode in SPL to fix an issue * where loading part of TF-A into SRAM using DMA silently fails. */ - if (IS_ENABLED(CONFIG_SPL_BUILD) && + if (IS_ENABLED(CONFIG_XPL_BUILD) && dev_read_bool(dev, "u-boot,spl-fifo-mode")) host->flags &= ~USE_DMA;
diff --git a/drivers/mmc/socfpga_dw_mmc.c b/drivers/mmc/socfpga_dw_mmc.c index 3147d3019c0..9dc1ceaa09b 100644 --- a/drivers/mmc/socfpga_dw_mmc.c +++ b/drivers/mmc/socfpga_dw_mmc.c @@ -61,7 +61,7 @@ static int socfpga_dwmci_clksel(struct dwmci_host *host) debug("%s: drvsel %d smplsel %d\n", __func__, priv->drvsel, priv->smplsel);
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) int ret;
ret = socfpga_secure_reg_write32(SOCFPGA_SECURE_REG_SYSMGR_SOC64_SDMMC, diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c index 0b396122b46..9fff1bc1a10 100644 --- a/drivers/mmc/tmio-common.c +++ b/drivers/mmc/tmio-common.c @@ -385,7 +385,7 @@ static bool tmio_sd_addr_is_dmaable(struct mmc_data *data) return false; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (IS_ENABLED(CONFIG_ARCH_UNIPHIER) && !IS_ENABLED(CONFIG_ARM64)) { /* * For UniPhier ARMv7 SoCs, the stack is allocated in locked diff --git a/drivers/mmc/uniphier-sd.c b/drivers/mmc/uniphier-sd.c index 5b3650d52ee..cc89ff767ab 100644 --- a/drivers/mmc/uniphier-sd.c +++ b/drivers/mmc/uniphier-sd.c @@ -36,7 +36,7 @@ static ulong uniphier_sd_clk_get_rate(struct tmio_sd_priv *priv) { #if CONFIG_IS_ENABLED(CLK) return clk_get_rate(&priv->clk); -#elif CONFIG_SPL_BUILD +#elif CONFIG_XPL_BUILD return 100000000; #else return 0; @@ -50,7 +50,7 @@ static int uniphier_sd_probe(struct udevice *dev) priv->clk_get_rate = uniphier_sd_clk_get_rate; priv->read_poll_flag = TMIO_SD_DMA_INFO1_END_RD2;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int ret;
ret = clk_get_by_index(dev, 0, &priv->clk); diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 24d0556cd37..0e2bdab4e7e 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -289,7 +289,7 @@ static inline int arasan_zynqmp_set_in_tapdelay(u32 node_id, u32 itap_delay) { int ret;
- if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { if (node_id == NODE_SD_0) { ret = zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN, SD0_ITAPCHGWIN); @@ -339,7 +339,7 @@ static inline int arasan_zynqmp_set_in_tapdelay(u32 node_id, u32 itap_delay)
static inline int arasan_zynqmp_set_out_tapdelay(u32 node_id, u32 otap_delay) { - if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { if (node_id == NODE_SD_0) return zynqmp_mmio_write(SD_OTAP_DLY, SD0_OTAPDLYSEL_MASK, @@ -356,7 +356,7 @@ static inline int arasan_zynqmp_set_out_tapdelay(u32 node_id, u32 otap_delay)
static inline int zynqmp_dll_reset(u32 node_id, u32 type) { - if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { if (node_id == NODE_SD_0) return zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST, type == PM_DLL_RESET_ASSERT ? diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 10d575e9f93..db010417b86 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -16,7 +16,7 @@ mtd-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o mtd-$(CONFIG_HBMC_AM654) += hbmc-am654.o
# U-Boot build -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),)
ifneq ($(mtd-y),) obj-y += mtd.o diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 96e186600a1..68b53dced1b 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+
-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),) nandcore-objs := core.o bbt.o obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o obj-$(CONFIG_MTD_RAW_NAND) += raw/ diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index 46fead6fa48..ca10ac7aecb 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD
ifdef CONFIG_SPL_NAND_DRIVERS NORMAL_DRIVERS=y diff --git a/drivers/mtd/nand/raw/atmel_nand.c b/drivers/mtd/nand/raw/atmel_nand.c index 4dbf7b47135..605298628d6 100644 --- a/drivers/mtd/nand/raw/atmel_nand.c +++ b/drivers/mtd/nand/raw/atmel_nand.c @@ -1251,7 +1251,7 @@ static int at91_nand_ready(struct mtd_info *mtd) } #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* The following code is for SPL */ static struct mtd_info *mtd; static struct nand_chip nand_chip; @@ -1526,4 +1526,4 @@ void board_nand_init(void) if (atmel_nand_chip_init(i, base_addr[i])) log_err("atmel_nand: Fail to initialize #%d chip", i); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c index c89661badbf..4430c4e93ee 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c @@ -152,7 +152,7 @@ static void lpc32xx_nand_init(void) &lpc32xx_nand_mlc_registers->time_reg); }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD)
/** * lpc32xx_cmd_ctrl - write command to either cmd or data register @@ -606,7 +606,7 @@ void board_nand_init(void) pr_err("nand_register returned %i", ret); }
-#else /* defined(CONFIG_SPL_BUILD) */ +#else /* defined(CONFIG_XPL_BUILD) */
void nand_init(void) { @@ -770,4 +770,4 @@ unsigned int nand_page_size(void) return BYTES_PER_PAGE; }
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_slc.c b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c index 4d643bc64bc..109c31fb4d1 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_slc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c @@ -84,7 +84,7 @@ static struct nand_ecclayout lpc32xx_nand_oob_16 = { } };
-#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) #define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CFG_SYS_NAND_ECCSIZE)
/* @@ -162,7 +162,7 @@ static int lpc32xx_nand_dev_ready(struct mtd_info *mtd) return readl(&lpc32xx_nand_slc_regs->stat) & STAT_NAND_READY; }
-#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) /* * Prepares DMA descriptors for NAND RD/WR operations * If the size is < 256 Bytes then it is assumed to be @@ -510,7 +510,7 @@ static void lpc32xx_write_byte(struct mtd_info *mtd, uint8_t byte) */ int board_nand_init(struct nand_chip *lpc32xx_chip) { -#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) int ret;
/* Acquire a channel for our use */ @@ -533,7 +533,7 @@ int board_nand_init(struct nand_chip *lpc32xx_chip) lpc32xx_chip->read_byte = lpc32xx_read_byte; lpc32xx_chip->write_byte = lpc32xx_write_byte;
-#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) /* Hardware ECC calculation is supported when DMA driver is selected */ lpc32xx_chip->ecc.mode = NAND_ECC_HW;
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 0545c23e268..1b65c6f6443 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -414,7 +414,7 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd_to_nand(mtd); int ret = 0; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int res; #endif
@@ -434,7 +434,7 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) nand_release_device(mtd); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* Mark block bad in BBT */ if (chip->bbt) { res = nand_markbad_bbt(mtd, ofs); @@ -488,7 +488,7 @@ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs) if (!chip->bbt) return 0; /* Return info from the table */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD return nand_isreserved_bbt(mtd, ofs); #else return 0; @@ -518,7 +518,7 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt) return chip->block_bad(mtd, ofs);
/* Return info from the table */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD return nand_isbad_bbt(mtd, ofs, allowbbt); #else return 0; @@ -3729,7 +3729,7 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) if (!chip->read_buf || chip->read_buf == nand_read_buf) chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (!chip->scan_bbt) chip->scan_bbt = nand_default_bbt; #endif diff --git a/drivers/mtd/nand/raw/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c index a36e2a148cc..9c704c60e8e 100644 --- a/drivers/mtd/nand/raw/omap_gpmc.c +++ b/drivers/mtd/nand/raw/omap_gpmc.c @@ -1011,7 +1011,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, return 0; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * omap_nand_switch_ecc - switch the ECC operation between different engines * (h/w and s/w) and different algorithms (hamming and BCHx) @@ -1072,7 +1072,7 @@ int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength) err = nand_scan_tail(mtd); return err; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* * Board-specific NAND initialization. The following members of the diff --git a/drivers/mtd/nand/raw/sand_nand.c b/drivers/mtd/nand/raw/sand_nand.c index 229d7b5b65a..53489223030 100644 --- a/drivers/mtd/nand/raw/sand_nand.c +++ b/drivers/mtd/nand/raw/sand_nand.c @@ -680,7 +680,7 @@ void board_nand_init(void) log_info("Failed to get sandbox NAND: %d\n", err); }
-#if IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_NAND_INIT) +#if IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_NAND_INIT) void nand_deselect(void) { nand_chip->select_chip(nand_to_mtd(nand_chip), -1); diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile index 4dc417a5794..7f4a8514c17 100644 --- a/drivers/mtd/onenand/Makefile +++ b/drivers/mtd/onenand/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2005-2007 Samsung Electronics. # Kyungmin Park kyungmin.park@samsung.com
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_ONENAND) := onenand_uboot.o onenand_base.o onenand_bbt.o obj-$(CONFIG_SAMSUNG_ONENAND) += samsung.o else diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 409395382f5..2a287a62a47 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_$(SPL_TPL_)DM_SPI_FLASH) += sf-uclass.o spi-nor-y := sf_probe.o spi-nor-ids.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o ifeq ($(CONFIG_$(SPL_TPL_)SPI_FLASH_TINY),y) spi-nor-y += spi-nor-tiny.o diff --git a/drivers/mtd/spi/sf-uclass.c b/drivers/mtd/spi/sf-uclass.c index a4d15bd64aa..102a9236826 100644 --- a/drivers/mtd/spi/sf-uclass.c +++ b/drivers/mtd/spi/sf-uclass.c @@ -54,7 +54,7 @@ struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs, struct udevice *bus; char *str;
-#if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(USE_TINY_PRINTF) +#if defined(CONFIG_XPL_BUILD) && CONFIG_IS_ENABLED(USE_TINY_PRINTF) str = "spi_flash"; #else char name[30]; diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c index 6db24189c8e..438eb3698d5 100644 --- a/drivers/mtd/spi/sf_dataflash.c +++ b/drivers/mtd/spi/sf_dataflash.c @@ -438,7 +438,7 @@ static int add_dataflash(struct udevice *dev, char *name, int nr_pages, spi_flash->size = nr_pages * pagesize; spi_flash->erase_size = pagesize;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("SPI DataFlash: Detected %s with page size ", spi_flash->name); print_size(spi_flash->page_size, ", erase size "); print_size(spi_flash->erase_size, ", total "); diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 8f7a77e7169..b29b390a0ae 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -1030,7 +1030,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
while (len) { schedule(); - if (!IS_ENABLED(CONFIG_SPL_BUILD) && ctrlc()) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && ctrlc()) { addr_known = false; ret = -EINTR; goto erase_err; @@ -4262,7 +4262,7 @@ int spi_nor_scan(struct spi_nor *nor) nor->erase_size = mtd->erasesize; nor->sector_size = mtd->erasesize;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("SF: Detected %s with page size ", nor->name); print_size(nor->page_size, ", erase size "); print_size(nor->erase_size, ", total "); diff --git a/drivers/net/dwc_eth_xgmac_socfpga.c b/drivers/net/dwc_eth_xgmac_socfpga.c index 270c1b0ca6c..87fb7e887e7 100644 --- a/drivers/net/dwc_eth_xgmac_socfpga.c +++ b/drivers/net/dwc_eth_xgmac_socfpga.c @@ -37,7 +37,7 @@ static int dwxgmac_socfpga_do_setphy(struct udevice *dev, u32 modereg) u32 modemask = SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << xgmac->syscon_phy_regshift;
- if (!(IS_ENABLED(CONFIG_SPL_BUILD)) && IS_ENABLED(CONFIG_SPL_ATF)) { + if (!(IS_ENABLED(CONFIG_XPL_BUILD)) && IS_ENABLED(CONFIG_SPL_ATF)) { u32 index = ((u64)xgmac->syscon_phy - socfpga_get_sysmgr_addr() - SYSMGR_SOC64_EMAC0) >> 2;
diff --git a/drivers/net/dwmac_socfpga.c b/drivers/net/dwmac_socfpga.c index bba3fc4d34b..a9e2d8c0972 100644 --- a/drivers/net/dwmac_socfpga.c +++ b/drivers/net/dwmac_socfpga.c @@ -68,7 +68,7 @@ static int dwmac_socfpga_do_setphy(struct udevice *dev, u32 modereg) struct dwmac_socfpga_plat *pdata = dev_get_plat(dev); u32 modemask = SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << pdata->reg_shift;
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) u32 index = ((u64)pdata->phy_intf - socfpga_get_sysmgr_addr() - SYSMGR_SOC64_EMAC0) >> 2;
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c index ede3959c94f..2c373c7c12e 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c @@ -671,7 +671,7 @@ const struct pinctrl_ops mtk_pinctrl_ops = { };
#if CONFIG_IS_ENABLED(DM_GPIO) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO)) + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_GPIO)) static int mtk_gpio_get(struct udevice *dev, unsigned int off) { int val, err; @@ -814,7 +814,7 @@ int mtk_pinctrl_common_probe(struct udevice *dev, }
#if CONFIG_IS_ENABLED(DM_GPIO) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO)) + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_GPIO)) ret = mtk_gpiochip_register(dev); #endif
diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c index eada1001240..fbf0271f08a 100644 --- a/drivers/pinctrl/pinctrl_stm32.c +++ b/drivers/pinctrl/pinctrl_stm32.c @@ -39,7 +39,7 @@ struct stm32_gpio_bank { struct list_head list; };
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
static char pin_name[PINNAME_SIZE]; static const char * const pinmux_mode[GPIOF_COUNT] = { @@ -488,7 +488,7 @@ static struct pinctrl_ops stm32_pinctrl_ops = { #else /* PINCTRL_FULL */ .set_state_simple = stm32_pinctrl_set_state_simple, #endif /* PINCTRL_FULL */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .get_pin_name = stm32_pinctrl_get_pin_name, .get_pins_count = stm32_pinctrl_get_pins_count, .get_pin_muxing = stm32_pinctrl_get_pin_muxing, diff --git a/drivers/pinctrl/tegra/Makefile b/drivers/pinctrl/tegra/Makefile index 75d3cabc62b..b1dda417475 100644 --- a/drivers/pinctrl/tegra/Makefile +++ b/drivers/pinctrl/tegra/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifdef CONFIG_TEGRA20 obj-y += pinctrl-tegra20.o else diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier.h b/drivers/pinctrl/uniphier/pinctrl-uniphier.h index 5951835d6e8..da7bb4f6377 100644 --- a/drivers/pinctrl/uniphier/pinctrl-uniphier.h +++ b/drivers/pinctrl/uniphier/pinctrl-uniphier.h @@ -126,7 +126,7 @@ struct uniphier_pinctrl_socdata {
#define __UNIPHIER_PINMUX_FUNCTION(func) #func
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * a tricky way to drop unneeded *_pins and *_muxvals arrays from SPL, * suppressing "defined but not used" warnings. diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 6f7e6fb0a6b..5a987194cda 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -9,7 +9,7 @@ obj-y += pmic/ obj-y += regulator/
obj-$(CONFIG_AXP221_POWER) += axp221.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o obj-$(CONFIG_AXP305_POWER) += axp_spl.o diff --git a/drivers/power/pmic/rk8xx.c b/drivers/power/pmic/rk8xx.c index 4d5a5ceafad..a14555cf472 100644 --- a/drivers/power/pmic/rk8xx.c +++ b/drivers/power/pmic/rk8xx.c @@ -237,7 +237,7 @@ static int rk8xx_bind(struct udevice *dev) if (!children) debug("%s: %s - no child found\n", __func__, dev->name);
- if (IS_ENABLED(CONFIG_SPL_BUILD) && + if (IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON)) dev_or_flags(dev, DM_FLAG_PROBE_AFTER_BIND);
@@ -331,7 +331,7 @@ static int rk8xx_probe(struct udevice *dev) pmic_reg_read(dev, init_data[i].reg)); }
- if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { printf("PMIC: RK%x ", show_variant); if (on_source && off_source) printf("(on=0x%02x, off=0x%02x)", diff --git a/drivers/power/pmic/stpmic1.c b/drivers/power/pmic/stpmic1.c index c99a0c27b33..f0415fbd172 100644 --- a/drivers/power/pmic/stpmic1.c +++ b/drivers/power/pmic/stpmic1.c @@ -91,7 +91,7 @@ static int stpmic1_bind(struct udevice *dev) dev_dbg(dev, "no child found\n"); #endif /* DM_REGULATOR */
- if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { ret = device_bind_driver(dev, "stpmic1-nvm", "stpmic1-nvm", NULL); if (ret) @@ -124,7 +124,7 @@ U_BOOT_DRIVER(pmic_stpmic1) = { .ops = &stpmic1_ops, };
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int stpmic1_nvm_rw(struct udevice *dev, u8 addr, u8 *buf, int buf_len, enum pmic_nvm_op op) { @@ -230,7 +230,7 @@ U_BOOT_DRIVER(stpmic1_nvm) = { .id = UCLASS_MISC, .ops = &stpmic1_nvm_ops, }; -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#ifdef CONFIG_SYSRESET static int stpmic1_sysreset_request(struct udevice *dev, enum sysreset_t type) diff --git a/drivers/power/power_core.c b/drivers/power/power_core.c index 1caf9f09346..61b2fe5f54a 100644 --- a/drivers/power/power_core.c +++ b/drivers/power/power_core.c @@ -78,7 +78,7 @@ struct pmic *pmic_get(const char *s) return NULL; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int pmic_dump(struct pmic *p) { int i, ret; diff --git a/drivers/power/regulator/rk8xx.c b/drivers/power/regulator/rk8xx.c index 34e61511d88..3f18ee65ce0 100644 --- a/drivers/power/regulator/rk8xx.c +++ b/drivers/power/regulator/rk8xx.c @@ -16,7 +16,7 @@ #include <power/pmic.h> #include <power/regulator.h>
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define ENABLE_DRIVER #endif
diff --git a/drivers/power/sy8106a.c b/drivers/power/sy8106a.c index fb6028de71a..d9a2b6904b0 100644 --- a/drivers/power/sy8106a.c +++ b/drivers/power/sy8106a.c @@ -10,7 +10,7 @@ #define SY8106A_VOUT1_SEL 1 #define SY8106A_VOUT1_SEL_ENABLE (1 << 7)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static u8 sy8106a_mvolt_to_cfg(int mvolt, int min, int max, int div) { if (mvolt < min) diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index fdb2e78ec9e..35d8f5761e1 100644 --- a/drivers/ram/Makefile +++ b/drivers/ram/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_K3_DDRSS) += k3-ddrss/ obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o
obj-$(CONFIG_RAM_SIFIVE) += sifive/ -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_STARFIVE_DDR) += starfive/ endif
diff --git a/drivers/ram/mediatek/ddr3-mt7629.c b/drivers/ram/mediatek/ddr3-mt7629.c index c27c4593b9d..e9791697066 100644 --- a/drivers/ram/mediatek/ddr3-mt7629.c +++ b/drivers/ram/mediatek/ddr3-mt7629.c @@ -233,7 +233,7 @@ struct mtk_ddr3_priv { struct clk mem_mux; };
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static int mtk_ddr3_rank_size_detect(struct udevice *dev) { struct mtk_ddr3_priv *priv = dev_get_priv(dev); @@ -697,7 +697,7 @@ static int mtk_ddr3_probe(struct udevice *dev) if (priv->dramc_ao == FDT_ADDR_T_NONE) return -EINVAL;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int ret;
ret = clk_get_by_index(dev, 0, &priv->phy); diff --git a/drivers/ram/rockchip/sdram_rk3188.c b/drivers/ram/rockchip/sdram_rk3188.c index 618bce5c9f4..ffff7d55f33 100644 --- a/drivers/ram/rockchip/sdram_rk3188.c +++ b/drivers/ram/rockchip/sdram_rk3188.c @@ -84,7 +84,7 @@ const int ddrconf_table[] = { #define DQS_GATE_TRAINING_ERROR_RANK0 (1 << 4) #define DQS_GATE_TRAINING_ERROR_RANK1 (2 << 4)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static void copy_to_reg(u32 *dest, const u32 *src, u32 n) { int i; @@ -851,7 +851,7 @@ static int rk3188_dmc_of_to_plat(struct udevice *dev)
return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#if CONFIG_IS_ENABLED(OF_PLATDATA) static int conv_of_plat(struct udevice *dev) @@ -878,7 +878,7 @@ static int conv_of_plat(struct udevice *dev)
static int rk3188_dmc_probe(struct udevice *dev) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct rk3188_sdram_params *plat = dev_get_plat(dev); struct regmap *map; struct udevice *dev_clk; @@ -888,7 +888,7 @@ static int rk3188_dmc_probe(struct udevice *dev)
priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #if CONFIG_IS_ENABLED(OF_PLATDATA) ret = conv_of_plat(dev); if (ret) @@ -950,12 +950,12 @@ U_BOOT_DRIVER(rockchip_rk3188_dmc) = { .id = UCLASS_RAM, .of_match = rk3188_dmc_ids, .ops = &rk3188_dmc_ops, -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .of_to_plat = rk3188_dmc_of_to_plat, #endif .probe = rk3188_dmc_probe, .priv_auto = sizeof(struct dram_info), -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .plat_auto = sizeof(struct rk3188_sdram_params), #endif }; diff --git a/drivers/ram/rockchip/sdram_rk3288.c b/drivers/ram/rockchip/sdram_rk3288.c index c9f61e933e9..25ceab98ee9 100644 --- a/drivers/ram/rockchip/sdram_rk3288.c +++ b/drivers/ram/rockchip/sdram_rk3288.c @@ -84,7 +84,7 @@ const int ddrconf_table[] = { #define DQS_GATE_TRAINING_ERROR_RANK1 (2 << 4)
#if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) static void copy_to_reg(u32 *dest, const u32 *src, u32 n) { int i; @@ -1013,7 +1013,7 @@ static int rk3288_dmc_of_to_plat(struct udevice *dev)
return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#if CONFIG_IS_ENABLED(OF_PLATDATA) static int conv_of_plat(struct udevice *dev) @@ -1041,7 +1041,7 @@ static int conv_of_plat(struct udevice *dev) static int rk3288_dmc_probe(struct udevice *dev) { #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) struct rk3288_sdram_params *plat = dev_get_plat(dev); struct udevice *dev_clk; struct regmap *map; @@ -1051,7 +1051,7 @@ static int rk3288_dmc_probe(struct udevice *dev)
priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU); #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) #if CONFIG_IS_ENABLED(OF_PLATDATA) ret = conv_of_plat(dev); if (ret) @@ -1119,13 +1119,13 @@ U_BOOT_DRIVER(rockchip_rk3288_dmc) = { .of_match = rk3288_dmc_ids, .ops = &rk3288_dmc_ops, #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) .of_to_plat = rk3288_dmc_of_to_plat, #endif .probe = rk3288_dmc_probe, .priv_auto = sizeof(struct dram_info), #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) .plat_auto = sizeof(struct rk3288_sdram_params), #endif }; diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index 45270e27184..c3745f9445b 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -3196,7 +3196,7 @@ U_BOOT_DRIVER(dmc_rk3399) = { .probe = rk3399_dmc_probe, .priv_auto = sizeof(struct dram_info), #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) .plat_auto = sizeof(struct rockchip_dmc_plat), #endif }; diff --git a/drivers/ram/rockchip/sdram_rv1126.c b/drivers/ram/rockchip/sdram_rv1126.c index 4fbb088a8d9..b371f597d23 100644 --- a/drivers/ram/rockchip/sdram_rv1126.c +++ b/drivers/ram/rockchip/sdram_rv1126.c @@ -34,7 +34,7 @@
struct dram_info { #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) void __iomem *pctl; void __iomem *phy; struct rv1126_cru *cru; @@ -49,7 +49,7 @@ struct dram_info { };
#if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD))
#define GRF_BASE_ADDR 0xfe000000 #define PMU_GRF_BASE_ADDR 0xfe020000 @@ -3507,7 +3507,7 @@ error: static int rv1126_dmc_probe(struct udevice *dev) { #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) if (rv1126_dmc_init(dev)) return 0; #else diff --git a/drivers/ram/sifive/sifive_ddr.c b/drivers/ram/sifive/sifive_ddr.c index bd2f438d727..c555d2af2d0 100644 --- a/drivers/ram/sifive/sifive_ddr.c +++ b/drivers/ram/sifive/sifive_ddr.c @@ -91,7 +91,7 @@ struct sifive_ddr_info { u32 *physical_filter_ctrl; };
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) struct sifive_ddr_params { struct sifive_ddrctl pctl_regs; struct sifive_ddrphy phy_regs; @@ -337,7 +337,7 @@ static int sifive_ddr_probe(struct udevice *dev) priv->info.base = gd->ram_base; priv->info.size = gd->ram_size;
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) int ret; u32 clock = 0;
@@ -404,7 +404,7 @@ U_BOOT_DRIVER(sifive_ddr) = { .ops = &sifive_ddr_ops, .probe = sifive_ddr_probe, .priv_auto = sizeof(struct sifive_ddr_info), -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) .plat_auto = sizeof(struct sifive_dmc_plat), #endif }; diff --git a/drivers/ram/starfive/Makefile b/drivers/ram/starfive/Makefile index 1df42c377bd..f1567b04b4c 100644 --- a/drivers/ram/starfive/Makefile +++ b/drivers/ram/starfive/Makefile @@ -2,10 +2,10 @@ # # Copyright (c) 2022 StarFive, Inc # -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrphy_start.o obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrphy_train.o obj-$(CONFIG_SPL_STARFIVE_DDR) += starfive_ddr.o obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrphy_utils.o obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrcsr_boot.o -endif \ No newline at end of file +endif diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c index debc458c0e2..e9cd6229ec4 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ram.c +++ b/drivers/ram/stm32mp1/stm32mp1_ram.c @@ -371,7 +371,7 @@ static int stm32mp1_ddr_probe(struct udevice *dev)
priv->info.base = STM32_DDR_BASE;
- if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { priv->info.size = 0; ret = stm32mp1_ddr_setup(dev);
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c index 866437fd24f..76d108080d9 100644 --- a/drivers/reset/reset-socfpga.c +++ b/drivers/reset/reset-socfpga.c @@ -46,7 +46,7 @@ struct socfpga_reset_data { */ static bool socfpga_reset_keep_enabled(void) { -#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(ENV_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(ENV_SUPPORT) const char *env_str; long val;
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 628be4c89fb..7c19a435722 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SCSI) += scsi.o scsi-uclass.o ifdef CONFIG_SCSI obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += scsi_bootdev.o @@ -12,7 +12,7 @@ obj-$(CONFIG_SANDBOX) += scsi_emul.o endif endif
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_SPL_SATA obj-$(CONFIG_SCSI) += scsi.o scsi-uclass.o endif diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 78810f98367..66bd30b837b 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -63,7 +63,7 @@ obj-$(CONFIG_XEN_SERIAL) += serial_xen.o obj-$(CONFIG_XTENSA_SEMIHOSTING_SERIAL) += serial_xtensa_semihosting.o obj-$(CONFIG_S5P4418_PL011_SERIAL) += serial_s5p4418_pl011.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o endif obj-$(CONFIG_UART4_SERIAL) += serial_adi_uart4.o diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index 7e45a80969e..0b35582aaa4 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -218,7 +218,7 @@ static const struct dm_serial_ops atmel_serial_ops = { .setbrg = atmel_serial_setbrg, };
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_CLK) +#if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_SPL_CLK) static int atmel_serial_enable_clk(struct udevice *dev) { struct atmel_serial_priv *priv = dev_get_priv(dev); diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 6fcb5b523ac..248fe3f778f 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -227,7 +227,7 @@ static void ns16550_setbrg(struct ns16550 *com_port, int baud_divisor)
void ns16550_init(struct ns16550 *com_port, int baud_divisor) { -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_OMAP34XX) /* * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode * before SPL starts only THRE bit is set. We have to empty the @@ -303,7 +303,7 @@ void ns16550_putc(struct ns16550 *com_port, char c) char ns16550_getc(struct ns16550 *com_port) { while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) { -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_TTY) extern void usbtty_poll(void); usbtty_poll(); #endif diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 84f02f7ac76..9feaa1eceec 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -101,7 +101,7 @@ static void serial_find_console_or_panic(void) } } } - if (!IS_ENABLED(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(OF_CONTROL) || + if (!IS_ENABLED(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(OF_CONTROL) || !blob) { /* * Try to use CONFIG_CONS_INDEX if available (it is numbered diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index dc4bb06fa99..e10ca6eef76 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -315,7 +315,7 @@ static struct serial_device *get_current(void)
/* We must have a console device */ if (!dev) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD puts("Cannot find console\n"); hang(); #else diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 801b7645afa..734780a124a 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -117,7 +117,7 @@ static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, u8 reg_width, writeb(val % 16, &uart->rest.value); }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int s5p_serial_setbrg(struct udevice *dev, int baudrate) { struct s5p_serial_plat *plat = dev_get_plat(dev); diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 55f13c00ddf..b74712f3eeb 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -152,7 +152,7 @@ static int zynq_serial_setbrg(struct udevice *dev, int baudrate) return 0; }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) static int zynq_serial_setconfig(struct udevice *dev, uint serial_config) { struct zynq_uart_plat *plat = dev_get_plat(dev); diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c index 6bd48b1b373..b520c727900 100644 --- a/drivers/spi/designware_spi.c +++ b/drivers/spi/designware_spi.c @@ -219,7 +219,7 @@ static int dw_spi_dwc_init(struct udevice *bus, struct dw_spi_priv *priv)
static int request_gpio_cs(struct udevice *bus) { -#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_XPL_BUILD) struct dw_spi_priv *priv = dev_get_priv(bus); int ret;
@@ -482,7 +482,7 @@ static int poll_transfer(struct dw_spi_priv *priv) */ __weak void external_cs_manage(struct udevice *dev, bool on) { -#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_XPL_BUILD) struct dw_spi_priv *priv = dev_get_priv(dev->parent);
if (!dm_gpio_is_valid(&priv->cs_gpio)) diff --git a/drivers/spi/rockchip_sfc.c b/drivers/spi/rockchip_sfc.c index 596c22aa010..43aefc20c9a 100644 --- a/drivers/spi/rockchip_sfc.c +++ b/drivers/spi/rockchip_sfc.c @@ -229,7 +229,7 @@ static int rockchip_sfc_ofdata_to_platdata(struct udevice *bus) sfc->regbase = dev_read_addr_ptr(bus); sfc->use_dma = !dev_read_bool(bus, "rockchip,sfc-no-dma");
- if (IS_ENABLED(CONFIG_SPL_BUILD) && sfc->use_dma) + if (IS_ENABLED(CONFIG_XPL_BUILD) && sfc->use_dma) sfc->use_dma = !dev_read_bool(bus, "u-boot,spl-sfc-no-dma");
#if CONFIG_IS_ENABLED(CLK) diff --git a/drivers/sysreset/sysreset_ast.c b/drivers/sysreset/sysreset_ast.c index ef09440bbef..4e15ebd53cc 100644 --- a/drivers/sysreset/sysreset_ast.c +++ b/drivers/sysreset/sysreset_ast.c @@ -33,7 +33,7 @@ static int ast_sysreset_request(struct udevice *dev, enum sysreset_t type) return -EPROTONOSUPPORT; }
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) ret = wdt_expire_now(wdt, reset_mode); if (ret) { debug("Sysreset failed: %d", ret); diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c index cbe06a9e7b6..4cfd38ec245 100644 --- a/drivers/usb/cdns3/core.c +++ b/drivers/usb/cdns3/core.c @@ -149,7 +149,7 @@ static int cdns3_core_init_role(struct cdns3 *cdns)
dr_mode = best_dr_mode;
-#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_XPL_BUILD) if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { ret = cdns3_host_init(cdns); if (ret) { @@ -412,7 +412,7 @@ int cdns3_bind(struct udevice *parent)
switch (dr_mode) { #if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) case USB_DR_MODE_HOST: debug("%s: dr_mode: HOST\n", __func__); driver = "cdns-usb3-host"; @@ -498,7 +498,7 @@ int dm_usb_gadget_handle_interrupts(struct udevice *dev) #endif
#if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) static int cdns3_host_probe(struct udevice *dev) { struct cdns3_host_priv *priv = dev_get_priv(dev); diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6abcce0d9c7..3158487cba4 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_$(SPL_TPL_)USB_GADGET) += epautoconf.o config.o usbstring.o obj-$(CONFIG_$(SPL_TPL_)USB_ETHER) += epautoconf.o config.o usbstring.o ether.o obj-$(CONFIG_$(SPL_TPL_)USB_ETH_RNDIS) += rndis.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o obj-$(CONFIG_SPL_DFU) += f_dfu.o obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o @@ -21,7 +21,7 @@ obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_MAX3420) += max3420_udc.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o obj-$(CONFIG_DFU_OVER_USB) += f_dfu.o diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c index 5d62eb475d0..36934b1bcf7 100644 --- a/drivers/usb/gadget/f_sdp.c +++ b/drivers/usb/gadget/f_sdp.c @@ -411,7 +411,7 @@ static void sdp_rx_data_complete(struct usb_ep *ep, struct usb_request *req) return; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD env_set_hex("filesize", sdp->dnl_bytes); #endif printf("done\n"); @@ -736,7 +736,7 @@ static u32 sdp_jump_imxheader(void *address) return 0; }
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static ulong sdp_load_read(struct spl_load_info *load, ulong sector, ulong count, void *buf) { @@ -825,7 +825,7 @@ static int sdp_handle_in_ep(struct spl_image_info *spl_image,
/* If imx header fails, try some U-Boot specific headers */ if (status) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) sdp_func->jmp_address = (u32)search_container_header((ulong)sdp_func->jmp_address, sdp_func->dnl_bytes); else if (IS_ENABLED(CONFIG_SPL_LOAD_FIT)) @@ -907,7 +907,7 @@ static void sdp_handle_out_ep(void) } }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int sdp_handle(struct udevice *udc) #else int spl_sdp_handle(struct udevice *udc, struct spl_image_info *spl_image, @@ -928,7 +928,7 @@ int spl_sdp_handle(struct udevice *udc, struct spl_image_info *spl_image, schedule(); dm_usb_gadget_handle_interrupts(udc);
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD flag = sdp_handle_in_ep(spl_image, bootdev); #else flag = sdp_handle_in_ep(NULL, NULL); diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index f8e14eabfb2..26fee141f6e 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -266,7 +266,7 @@ U_BOOT_DRIVER(mtu3_peripheral) = { #endif
#if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) static int mtu3_host_probe(struct udevice *dev) { struct ssusb_mtk *ssusb = dev_to_ssusb(dev->parent); @@ -334,7 +334,7 @@ static int mtu3_glue_bind(struct udevice *parent) #endif
#if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) case USB_DR_MODE_HOST: dev_dbg(parent, "%s: dr_mode: host\n", __func__); driver = "mtu3-host"; diff --git a/dts/Makefile b/dts/Makefile index d6c2c9daf31..62a65688cf5 100644 --- a/dts/Makefile +++ b/dts/Makefile @@ -53,7 +53,7 @@ PHONY += arch-dtbs arch-dtbs: $(Q)$(MAKE) $(build)=$(dt_dir) dtbs
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_OF_EMBED) := dt-spl.dtb.o # support "out-of-tree" build for dtb-spl $(obj)/dt-spl.dtb.o: $(obj)/dt-spl.dtb.S FORCE diff --git a/env/Makefile b/env/Makefile index 673b979fdfa..c5145c1735f 100644 --- a/env/Makefile +++ b/env/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += env.o obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += attr.o obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += flags.o
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += callback.o obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o obj-$(CONFIG_ENV_IS_IN_EEPROM) += embedded.o diff --git a/env/common.c b/env/common.c index 6cba7f1c187..a58955a4f42 100644 --- a/env/common.c +++ b/env/common.c @@ -61,7 +61,7 @@ int env_do_env_set(int flag, int argc, char *const argv[], int env_flag)
debug("Initial value for argc=%d\n", argc);
-#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_CMD_NVEDIT_EFI) +#if !IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_CMD_NVEDIT_EFI) if (argc > 1 && argv[1][0] == '-' && argv[1][1] == 'e') return do_env_set_efi(NULL, flag, --argc, ++argv); #endif @@ -551,7 +551,7 @@ int env_export(env_t *env_out) void env_relocate(void) { if (gd->env_valid == ENV_INVALID) { -#if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_XPL_BUILD) /* Environment not changable */ env_set_default(NULL, 0); #else diff --git a/env/fat.c b/env/fat.c index f3f8b7301ee..b04b1d9c315 100644 --- a/env/fat.c +++ b/env/fat.c @@ -22,7 +22,7 @@ #include <asm/global_data.h> #include <linux/stddef.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* TODO(sjg@chromium.org): Figure out why this is needed */ # if !defined(CONFIG_TARGET_AM335X_EVM) || defined(CONFIG_SPL_OS_BOOT) # define LOADENV @@ -129,7 +129,7 @@ static int env_fat_load(void) if (!strcmp(ifname, "mmc")) mmc_initialize(NULL); #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if defined(CONFIG_AHCI) || defined(CONFIG_SCSI) if (!strcmp(CONFIG_ENV_FAT_INTERFACE, "scsi")) scsi_scan(true); diff --git a/env/flash.c b/env/flash.c index 1bd6e7003d6..0f7393d830c 100644 --- a/env/flash.c +++ b/env/flash.c @@ -22,7 +22,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD # if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_FLASH) # include <flash.h> # define CMD_SAVEENV @@ -35,11 +35,11 @@ DECLARE_GLOBAL_DATA_PTR; #if (!defined(CONFIG_MICROBLAZE) && !defined(CONFIG_ARCH_ZYNQ) && \ !defined(CONFIG_TARGET_MCCMON6) && !defined(CONFIG_TARGET_X600) && \ !defined(CONFIG_TARGET_EDMINIV2)) || \ - !defined(CONFIG_SPL_BUILD) + !defined(CONFIG_XPL_BUILD) #define LOADENV #endif
-#if !defined(CONFIG_TARGET_X600) || !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_TARGET_X600) || !defined(CONFIG_XPL_BUILD) #define INITENV #endif
diff --git a/env/mmc.c b/env/mmc.c index 0338aa6c56a..5fc0dae23a8 100644 --- a/env/mmc.c +++ b/env/mmc.c @@ -239,7 +239,7 @@ static void fini_mmc_for_env(struct mmc *mmc) mmc_set_env_part_restore(mmc); }
-#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_XPL_BUILD) static inline int write_env(struct mmc *mmc, unsigned long size, unsigned long offset, const void *buffer) { @@ -368,7 +368,7 @@ fini: fini_mmc_for_env(mmc); return ret; } -#endif /* CONFIG_CMD_SAVEENV && !CONFIG_SPL_BUILD */ +#endif /* CONFIG_CMD_SAVEENV && !CONFIG_XPL_BUILD */
static inline int read_env(struct mmc *mmc, unsigned long size, unsigned long offset, const void *buffer) @@ -498,7 +498,7 @@ U_BOOT_ENV_LOCATION(mmc) = { .location = ENVL_MMC, ENV_NAME("MMC") .load = env_mmc_load, -#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_XPL_BUILD) .save = env_save_ptr(env_mmc_save), .erase = ENV_ERASE_PTR(env_mmc_erase) #endif diff --git a/env/nand.c b/env/nand.c index fef5697ec39..fdaa903cd61 100644 --- a/env/nand.c +++ b/env/nand.c @@ -26,9 +26,9 @@ #include <u-boot/crc.h>
#if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_NAND) && \ - !defined(CONFIG_SPL_BUILD) + !defined(CONFIG_XPL_BUILD) #define CMD_SAVEENV -#elif defined(CONFIG_ENV_OFFSET_REDUND) && !defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_ENV_OFFSET_REDUND) && !defined(CONFIG_XPL_BUILD) #error CONFIG_ENV_OFFSET_REDUND must have CONFIG_CMD_SAVEENV & CONFIG_CMD_NAND #endif
@@ -224,7 +224,7 @@ static int env_nand_save(void) } #endif /* CMD_SAVEENV */
-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) static int readenv(size_t offset, u_char *buf) { return nand_spl_load_image(offset, CONFIG_ENV_SIZE, buf); @@ -265,7 +265,7 @@ static int readenv(size_t offset, u_char *buf)
return 0; } -#endif /* #if defined(CONFIG_SPL_BUILD) */ +#endif /* #if defined(CONFIG_XPL_BUILD) */
#ifdef CONFIG_ENV_OFFSET_OOB int get_nand_env_oob(struct mtd_info *mtd, unsigned long *result) diff --git a/env/nowhere.c b/env/nowhere.c index 326f27db2e9..6b9b6e2fe0b 100644 --- a/env/nowhere.c +++ b/env/nowhere.c @@ -33,7 +33,7 @@ static int env_nowhere_load(void) * searches default_environment array in that case. * For U-Boot proper, import the default environment to allow reload. */ - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) env_set_default(NULL, 0);
gd->env_valid = ENV_INVALID; diff --git a/env/sf.c b/env/sf.c index 21ac0c202e7..eb4c8d5ec95 100644 --- a/env/sf.c +++ b/env/sf.c @@ -329,7 +329,7 @@ done:
__weak void *env_sf_get_env_addr(void) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD return (void *)CONFIG_ENV_ADDR; #else return NULL; diff --git a/fs/Makefile b/fs/Makefile index 7b05c79e0cc..ec3e31c7c75 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -4,7 +4,7 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_FS_LOADER) += fs.o obj-$(CONFIG_SPL_FS_FAT) += fat/ obj-$(CONFIG_SPL_FS_EXT4) += ext4/ diff --git a/fs/fs.c b/fs/fs.c index 4bc28d1dffb..e2915e7cf79 100644 --- a/fs/fs.c +++ b/fs/fs.c @@ -237,7 +237,7 @@ static struct fstype_info fstypes[] = { .mkdir = fs_mkdir_unsupported, }, #endif -#if IS_ENABLED(CONFIG_SANDBOX) && !IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_SANDBOX) && !IS_ENABLED(CONFIG_XPL_BUILD) { .fstype = FS_TYPE_SANDBOX, .name = "sandbox", @@ -275,7 +275,7 @@ static struct fstype_info fstypes[] = { .ln = fs_ln_unsupported, }, #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #ifdef CONFIG_CMD_UBIFS { .fstype = FS_TYPE_UBIFS, @@ -296,7 +296,7 @@ static struct fstype_info fstypes[] = { }, #endif #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #ifdef CONFIG_FS_BTRFS { .fstype = FS_TYPE_BTRFS, diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index d6c15e2c406..644a0d77873 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -55,7 +55,7 @@ struct global_data { * @cur_serial_dev: current serial device */ struct udevice *cur_serial_dev; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /** * @jt: jump table * diff --git a/include/bootcount.h b/include/bootcount.h index bc06e17c9fb..847c0f02d98 100644 --- a/include/bootcount.h +++ b/include/bootcount.h @@ -120,13 +120,13 @@ static inline void bootcount_inc(void) return; }
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* Only increment bootcount when no bootcount support in SPL */ #if !defined(CONFIG_SPL_BOOTCOUNT_LIMIT) && !defined(CONFIG_TPL_BOOTCOUNT_LIMIT) bootcount_store(++bootcount); #endif env_set_ulong("bootcount", bootcount); -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ }
#else diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 2a136b96a6d..0a4e4b8ff85 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -63,7 +63,7 @@ #define BOOTENV_SHARED_MMC BOOTENV_SHARED_BLKDEV(mmc) #define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define BOOTENV_SHARED_MMC #define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV_NONE #define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV_NONE @@ -198,7 +198,7 @@ #define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata) #define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define BOOTENV_SHARED_SATA #define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV_NONE #define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV_NONE @@ -305,7 +305,7 @@ BOOTENV_SHARED_BLKDEV_BODY(usb) #define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define BOOTENV_RUN_NET_USB_START #define BOOTENV_SHARED_USB #define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV_NONE @@ -412,7 +412,7 @@ "\0" #define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \ "dhcp " -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define BOOTENV_DEV_DHCP BOOTENV_DEV_BLKDEV_NONE #define BOOTENV_DEV_NAME_DHCP BOOTENV_DEV_NAME_BLKDEV_NONE #else @@ -433,7 +433,7 @@ "fi\0" #define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \ "pxe " -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define BOOTENV_DEV_PXE BOOTENV_DEV_BLKDEV_NONE #define BOOTENV_DEV_NAME_PXE BOOTENV_DEV_NAME_BLKDEV_NONE #else diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 9efae58ce90..20fded56b77 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -43,7 +43,7 @@ #define CFG_SYS_NAND_U_BOOT_SIZE (576 << 10) #define CFG_SYS_NAND_U_BOOT_DST (0x11000000) #define CFG_SYS_NAND_U_BOOT_START (0x11000000) -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define CFG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CFG_SYS_NAND_U_BOOT_DST 0xD0000000 #define CFG_SYS_NAND_U_BOOT_START 0xD0000000 @@ -290,7 +290,7 @@ extern unsigned long get_sdram_size(void); /* * Config the L2 Cache as L2 SRAM */ -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) #define CFG_SYS_INIT_L2_ADDR 0xD0000000 #define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 67f46562539..19d3c72a6f1 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -75,7 +75,7 @@
#include <config_distro_bootcmd.h>
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #include <env/ti/dfu.h>
#define CFG_EXTRA_ENV_SETTINGS \ @@ -181,7 +181,7 @@ #endif /* !CONFIG_MTD_RAW_NAND */
/* USB Device Firmware Update support */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define DFUARGS \ DFU_ALT_INFO_EMMC \ DFU_ALT_INFO_MMC \ diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h index a8fa61c7e50..96efd38594a 100644 --- a/include/configs/am335x_guardian.h +++ b/include/configs/am335x_guardian.h @@ -16,7 +16,7 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK)
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x80000000\0" \ @@ -70,7 +70,7 @@ "setenv boot_syslinux_conf "extlinux/extlinux.conf"; " \ "run bootcmd_ubifs0;\0"
-#endif /* ! CONFIG_SPL_BUILD */ +#endif /* ! CONFIG_XPL_BUILD */
#define SPLASH_SCREEN_NAND_PART "nand0,10" #define SPLASH_SCREEN_BMP_FILE_SIZE 0x26000 diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index dedef91ba59..55d5190b221 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -20,7 +20,7 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK)
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "kloadaddr=0x84000000\0" \ @@ -117,7 +117,7 @@ "setenv mmcpart 5; " \ "fi; " \ "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" -#endif /* #ifndef CONFIG_SPL_BUILD */ +#endif /* #ifndef CONFIG_XPL_BUILD */
#if defined CONFIG_SHC_NETBOOT /* Network Boot */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 87ffa769d15..036995cbb48 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -35,7 +35,7 @@ /* NS16550 Configuration */ #define CFG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* USB Device Firmware Update support */ #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ @@ -63,7 +63,7 @@
#include <config_distro_bootcmd.h>
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #include <env/ti/dfu.h>
#define CFG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 4b4362ccfd8..aa31f3b05a0 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -18,7 +18,7 @@ #define CFG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CFG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ DFU_ALT_INFO_MMC \ diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 9dcacad2fc0..1f61b2b6af6 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -13,10 +13,10 @@ #include "siemens-env-common.h"
/* SPL config */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x00120000
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* ENET1 connects to base board and MUX with ESAI */ #define CFG_FEC_ENET_DEV 1 diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 98d4d8cf4bd..0d338389cb9 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -11,7 +11,7 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x00120000
#endif diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 416aa96366c..8db849c6d09 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -157,7 +157,7 @@ "console=ttyS2,115200n8\0" \ "hwconfig=dsp:wake=yes"
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* defines for SPL */
#endif diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 633ec1f32fa..96dcd731cb6 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -28,7 +28,7 @@ #define CFG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CFG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ DFU_ALT_INFO_MMC \ @@ -37,7 +37,7 @@ DFU_ALT_INFO_QSPI #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #ifdef CONFIG_SPL_DFU #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ diff --git a/include/configs/ds116.h b/include/configs/ds116.h index c2326596811..2f2bc43269e 100644 --- a/include/configs/ds116.h +++ b/include/configs/ds116.h @@ -18,7 +18,7 @@ */ #include "mv-common.h"
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#define KERNEL_ADDR_R __stringify(0x1000000) #define FDT_ADDR_R __stringify(0x2000000) @@ -39,6 +39,6 @@ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "console=ttyS0,115200\0"
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#endif /* _CONFIG_DS116_H */ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 95256575583..431a78de416 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -43,7 +43,7 @@ */ #include "mv-common.h"
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#define KERNEL_ADDR_R __stringify(0x1000000) #define FDT_ADDR_R __stringify(0x2000000) @@ -80,6 +80,6 @@ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "console=ttyS0,115200\0"
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#endif /* _CONFIG_SYNOLOGY_DS414_H */ diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h index 1b97ae22fc6..a89d298b525 100644 --- a/include/configs/gardena-smart-gateway-mt7688.h +++ b/include/configs/gardena-smart-gateway-mt7688.h @@ -15,7 +15,7 @@ #define CFG_SYS_UBOOT_BASE 0
/* Serial SPL */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL) #define CFG_SYS_NS16550_CLK 40000000 #define CFG_SYS_NS16550_COM1 0xb0000c00 #endif diff --git a/include/configs/imx6q-bosch-acc.h b/include/configs/imx6q-bosch-acc.h index fab5063b73f..64ddbf711d3 100644 --- a/include/configs/imx6q-bosch-acc.h +++ b/include/configs/imx6q-bosch-acc.h @@ -92,7 +92,7 @@ /* SPL */ #ifdef CONFIG_SPL
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_SYS_FSL_USDHC_NUM 2
#ifdef CONFIG_SYS_BOOT_EMMC diff --git a/include/configs/imx6ulz_smm_m2.h b/include/configs/imx6ulz_smm_m2.h index 9da98d0af27..44a3fc02e8a 100644 --- a/include/configs/imx6ulz_smm_m2.h +++ b/include/configs/imx6ulz_smm_m2.h @@ -14,14 +14,14 @@
#define CFG_MXC_UART_BASE UART4_BASE
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#define BOOT_TARGET_DEVICES(func) \ func(NAND, nand, 0) \
#include <config_distro_bootcmd.h>
-#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */
#define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 146f7945719..6ed4a6fd3fc 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -14,7 +14,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x912000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index fa20651d2df..2ec7f3d8b6f 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -21,7 +21,7 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h index 9a5e5bd009d..d323f84ac7a 100644 --- a/include/configs/imx8mm_data_modul_edm_sbc.h +++ b/include/configs/imx8mm_data_modul_edm_sbc.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x930000
/* For RAW image gives a error info not panic */ diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 9dd63fc1196..3bbbd900dd4 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -22,7 +22,7 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index 2158b0af74f..145dab91215 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -13,11 +13,11 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ # define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 2) \ diff --git a/include/configs/imx8mm_phg.h b/include/configs/imx8mm_phg.h index d2d7ffa0f5b..038d3a7ce3f 100644 --- a/include/configs/imx8mm_phg.h +++ b/include/configs/imx8mm_phg.h @@ -14,7 +14,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 #endif diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index 66816618b0c..ed09dd09bcb 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -12,7 +12,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 #endif diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index b82e35f4963..8b96f7fd1e4 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -23,7 +23,7 @@ EFI_GUID(0xb5fb6f08, 0xe142, 0x4db1, 0x97, 0xea, \ 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x184000 /* malloc f used before \ * GD_FLG_FULL_MALLOC_INIT \ * set \ diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 2bbd6b1680f..ccbb0f85559 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x182000 diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 9eefc31dc6f..666f46ac105 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index cd73a72d2b7..3bc4b0034e8 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -9,7 +9,7 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ diff --git a/include/configs/imx8mq_reform2.h b/include/configs/imx8mq_reform2.h index 7fa441a8a83..40f96a5f219 100644 --- a/include/configs/imx8mq_reform2.h +++ b/include/configs/imx8mq_reform2.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 4d5abe2d073..842184bcae2 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x00120000
#endif diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 93999509948..1b6eb2b81cf 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x00120000
#endif diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index aa9da19a11f..9308f5234f4 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -11,7 +11,7 @@
#define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x22040000
#endif diff --git a/include/configs/imx93_evk.h b/include/configs/imx93_evk.h index ce6567e2af6..53fb8c9b1ba 100644 --- a/include/configs/imx93_evk.h +++ b/include/configs/imx93_evk.h @@ -13,7 +13,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MALLOC_F_ADDR 0x204D0000 #endif
diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h index 3a129c5cce7..72a28a6a413 100644 --- a/include/configs/kontron-sl-mx8mm.h +++ b/include/configs/kontron-sl-mx8mm.h @@ -10,7 +10,7 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <config.h> #endif
@@ -39,7 +39,7 @@ #undef BOOTENV_RUN_NET_USB_START #define BOOTENV_RUN_NET_USB_START
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 #endif diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 3dda7b66806..3f52d00d6c8 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -12,7 +12,7 @@ EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \ 0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x182000 diff --git a/include/configs/librem5.h b/include/configs/librem5.h index 876b02f4da6..571c7724eaf 100644 --- a/include/configs/librem5.h +++ b/include/configs/librem5.h @@ -41,7 +41,7 @@ #define CONSOLE "ttymxc0" #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h index e8f7a59c401..ec1aa14be01 100644 --- a/include/configs/linkit-smart-7688.h +++ b/include/configs/linkit-smart-7688.h @@ -15,7 +15,7 @@ #define CFG_SYS_UBOOT_BASE 0
/* Serial SPL */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL) #define CFG_SYS_NS16550_CLK 40000000 #define CFG_SYS_NS16550_COM3 0xb0000e00
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e500a7d80ff..a02c752bbcf 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -8,7 +8,7 @@ #define __LS1043A_COMMON_H
/* SPL build */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SPL_NO_FMAN #define SPL_NO_DSPI #define SPL_NO_PCIE @@ -19,10 +19,10 @@ #define SPL_NO_QE #define SPL_NO_EEPROM #endif -#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT)) +#if (defined(CONFIG_XPL_BUILD) && defined(CONFIG_NAND_BOOT)) #define SPL_NO_MMC #endif -#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI)) +#if (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI)) #define SPL_NO_IFC #endif
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 867b098a073..53ef5975a28 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -8,7 +8,7 @@ #define __LS1046A_COMMON_H
/* SPL build */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SPL_NO_QBMAN #define SPL_NO_FMAN #define SPL_NO_ENV @@ -17,11 +17,11 @@ #define SPL_NO_USB #define SPL_NO_SATA #endif -#if defined(CONFIG_SPL_BUILD) && \ +#if defined(CONFIG_XPL_BUILD) && \ (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT)) #define SPL_NO_MMC #endif -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #define SPL_NO_IFC #endif
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 34085eeecc7..cdf281947dc 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -7,7 +7,7 @@ #define __LS1088_COMMON_H
/* SPL build */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SPL_NO_BOARDINFO #define SPL_NO_QIXIS #define SPL_NO_PCI diff --git a/include/configs/msc_sm2s_imx8mp.h b/include/configs/msc_sm2s_imx8mp.h index ea5c93ecf69..985b1ca91e6 100644 --- a/include/configs/msc_sm2s_imx8mp.h +++ b/include/configs/msc_sm2s_imx8mp.h @@ -20,7 +20,7 @@ #define CFG_FEC_MXC_PHYADDR 1 #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h index e6dba707195..636d62dd883 100644 --- a/include/configs/mt7621.h +++ b/include/configs/mt7621.h @@ -15,7 +15,7 @@ #define CFG_SYS_INIT_SP_OFFSET 0x800000
/* Serial SPL */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL) #define CFG_SYS_NS16550_CLK 50000000 #define CFG_SYS_NS16550_COM1 0xbe000c00 #endif diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h index 1df06811d65..ba876ac3029 100644 --- a/include/configs/mt7628.h +++ b/include/configs/mt7628.h @@ -13,7 +13,7 @@ #define CFG_SYS_INIT_SP_OFFSET 0x80000
/* Serial SPL */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL) #define CFG_SYS_NS16550_CLK 40000000 #define CFG_SYS_NS16550_COM1 0xb0000c00 #endif diff --git a/include/configs/n2350.h b/include/configs/n2350.h index f98b9f8582d..c789df55bfb 100644 --- a/include/configs/n2350.h +++ b/include/configs/n2350.h @@ -18,7 +18,7 @@ */ #include "mv-common.h"
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#define KERNEL_ADDR_R __stringify(0x1000000) #define FDT_ADDR_R __stringify(0x2000000) @@ -39,6 +39,6 @@ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "console=ttyS0,115200\0"
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#endif /* _CONFIG_N2350_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index f5bd0913449..23d8917b718 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -98,7 +98,7 @@ #define CFG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CFG_SYS_NAND_U_BOOT_DST (0x11000000) #define CFG_SYS_NAND_U_BOOT_START (0x11000000) -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define CFG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CFG_SYS_NAND_U_BOOT_DST 0xf8f80000 #define CFG_SYS_NAND_U_BOOT_START 0xf8f80000 @@ -280,7 +280,7 @@ /* * Config the L2 Cache as L2 SRAM */ -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) #define CFG_SYS_INIT_L2_ADDR 0xf8f80000 #define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index 0910ae2d870..e74a3f184c6 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -14,7 +14,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 422b89a3dd3..3012f64c0ae 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -9,7 +9,7 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index d652ae4ca34..c5bcd7dc5e8 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -13,7 +13,7 @@ #define CFG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xf8000000
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#ifndef ROCKCHIP_DEVICE_SETTINGS #define ROCKCHIP_DEVICE_SETTINGS @@ -38,6 +38,6 @@ ROCKCHIP_DEVICE_SETTINGS \ "boot_targets=" BOOT_TARGETS "\0"
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#endif /* __CONFIG_RK3399_COMMON_H */ diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h index 9121bba3738..9b8ab3cdf20 100644 --- a/include/configs/rockchip-common.h +++ b/include/configs/rockchip-common.h @@ -11,7 +11,7 @@ #define CFG_CPUID_OFFSET 0x7 #endif
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#define BOOT_TARGETS "mmc1 mmc0 nvme scsi usb pxe dhcp spi"
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 4838bfd4f13..2acfdc7df4a 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -117,7 +117,7 @@ /* SPL NAND boot support */
/* Extra Environment */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#ifdef CONFIG_CMD_DHCP #define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na) diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index 29a1197b5ae..af6dd4a8095 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -33,7 +33,7 @@ #ifdef CONFIG_DISTRO_DEFAULTS /*****************************************************************************/
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD)
#ifdef CONFIG_CMD_MMC #define BOOT_TARGET_MMC0(func) func(MMC, mmc, 0) @@ -129,7 +129,7 @@ STM32MP_EXTRA \ STM32MP_BOARD_EXTRA_ENV
-#endif /* ifndef CONFIG_SPL_BUILD */ +#endif /* ifndef CONFIG_XPL_BUILD */ #endif /* ifdef CONFIG_DISTRO_DEFAULTS*/
#endif /* __CONFIG_STM32MP15_COMMMON_H */ diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index 6fe6e7b9b8c..0f466711cae 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -10,7 +10,7 @@
/* PHY needs a longer autoneg timeout */
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_EXTRA_ENV_SETTINGS \ "dfu_alt_info_ram=u-boot.itb ram " \ __stringify(CONFIG_SPL_LOAD_FIT_ADDRESS) \ diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 45f7179f035..4a7474ff3f9 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -31,7 +31,7 @@ 115200}
/* Select serial console configuration */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_SYS_NS16550_COM1 OMAP34XX_UART1 #define CFG_SYS_NS16550_COM2 OMAP34XX_UART2 #define CFG_SYS_NS16550_COM3 OMAP34XX_UART3 diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index c4f116aabf8..7a333090b18 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -95,7 +95,7 @@ * So moving TEXT_BASE down to non-HS limit. */
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */ #endif
diff --git a/include/configs/turris_1x.h b/include/configs/turris_1x.h index 3d398a6c1ec..c05614950c7 100644 --- a/include/configs/turris_1x.h +++ b/include/configs/turris_1x.h @@ -63,7 +63,7 @@ /* * For SD card builds without SPL it is needed to set CONFIG_SYS_RAMBOOT * - * if CONFIG_SPL_BUILD + * if CONFIG_XPL_BUILD * if CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR * define CONFIG_SPL_MAX_SIZE = (CONFIG_SYS_L2_SIZE+CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * * SZ_512) @@ -121,7 +121,7 @@ */
/* Initial SRAM is used only for SD card boot in first stage image */ -#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD) #define CFG_SYS_INIT_L2_ADDR 0xf8f80000 #define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR /* diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h index 302194bc90f..03a12d519f2 100644 --- a/include/configs/turris_omnia.h +++ b/include/configs/turris_omnia.h @@ -31,7 +31,7 @@ #include "mv-common.h"
/* Include the common distro boot environment */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD
#define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ @@ -86,6 +86,6 @@ "bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \ BOOTENV
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#endif /* _CONFIG_TURRIS_OMNIA_H */ diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index b018bbe29dd..c54383b886e 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -12,7 +12,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 0b88e95603d..bff417fdafb 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -12,13 +12,13 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CFG_MALLOC_F_ADDR 0x184000 /* For RAW image gives a error info not panic */
-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
#define MEM_LAYOUT_ENV_SETTINGS \ "fdt_addr_r=0x50200000\0" \ diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index 2cf7bc70d8d..752b23d055c 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -47,7 +47,7 @@ /* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */ #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define CFG_MXC_UART_BASE UART1_BASE #endif
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index de0db7bb63f..bb0db7c5ca3 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -183,7 +183,7 @@ #endif
/* SPL can't handle all huge variables - define just DFU */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_DFU) #undef CFG_EXTRA_ENV_SETTINGS # define CFG_EXTRA_ENV_SETTINGS \ "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 03af859c951..37c77aa1611 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -44,7 +44,7 @@
/* Boot configuration */
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define BOOTENV #else
@@ -167,7 +167,7 @@ BOOT_TARGET_DEVICES_DHCP(func)
#include <config_distro_bootcmd.h> -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */
/* Default environment */ #ifndef CFG_EXTRA_ENV_SETTINGS diff --git a/include/env.h b/include/env.h index d2a5954ded8..01c3eeae7e2 100644 --- a/include/env.h +++ b/include/env.h @@ -44,7 +44,7 @@ struct env_clbk_tbl { * For SPL these are silently dropped to reduce code size, since environment * callbacks are not supported with SPL. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define U_BOOT_ENV_CALLBACK(name, callback) \ static inline __maybe_unused void _u_boot_env_noop_##name(void) \ { \ diff --git a/include/env_callback.h b/include/env_callback.h index 8e500aaaf80..5121ae07fd9 100644 --- a/include/env_callback.h +++ b/include/env_callback.h @@ -85,7 +85,7 @@ "serial#:serialno," \ CFG_ENV_CALLBACK_LIST_STATIC
-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD void env_callback_init(struct env_entry *var_entry); #else static inline void env_callback_init(struct env_entry *var_entry) diff --git a/include/fdtdec.h b/include/fdtdec.h index e80de24076c..555c9520379 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -143,7 +143,7 @@ extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ static inline u8 *dtb_dt_embedded(void) { #ifdef CONFIG_OF_EMBED -# ifdef CONFIG_SPL_BUILD +# ifdef CONFIG_XPL_BUILD return __dtb_dt_spl_begin; # else return __dtb_dt_begin; diff --git a/include/image-android-dt.h b/include/image-android-dt.h index 9a3aa8fa30f..d255744e8cb 100644 --- a/include/image-android-dt.h +++ b/include/image-android-dt.h @@ -13,7 +13,7 @@ bool android_dt_check_header(ulong hdr_addr); bool android_dt_get_fdt_by_index(ulong hdr_addr, u32 index, ulong *addr, u32 *size);
-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) void android_dt_print_contents(ulong hdr_addr); #endif
diff --git a/include/iotrace.h b/include/iotrace.h index d5610426cc8..5527c984fd2 100644 --- a/include/iotrace.h +++ b/include/iotrace.h @@ -42,7 +42,7 @@ struct iotrace_record { */
#if defined(CONFIG_IO_TRACE) && !defined(IOTRACE_IMPL) && \ - !defined(CONFIG_SPL_BUILD) + !defined(CONFIG_XPL_BUILD)
#undef readl #define readl(addr) iotrace_readl((const void *)(addr)) diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h index 2bc704e1104..a59f2a61e6a 100644 --- a/include/linux/kconfig.h +++ b/include/linux/kconfig.h @@ -40,7 +40,7 @@ #define _CONFIG_PREFIX TPL_ #elif defined(CONFIG_VPL_BUILD) #define _CONFIG_PREFIX VPL_ -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) #define _CONFIG_PREFIX SPL_ #else #define _CONFIG_PREFIX @@ -53,8 +53,8 @@ /* * CONFIG_VAL(FOO) evaluates to the value of * CONFIG_TOOLS_FOO if USE_HOSTCC is defined, - * CONFIG_FOO if CONFIG_SPL_BUILD is undefined, - * CONFIG_SPL_FOO if CONFIG_SPL_BUILD is defined. + * CONFIG_FOO if CONFIG_XPL_BUILD is undefined, + * CONFIG_SPL_FOO if CONFIG_XPL_BUILD is defined. * CONFIG_TPL_FOO if CONFIG_TPL_BUILD is defined. * CONFIG_VPL_FOO if CONFIG_VPL_BUILD is defined. */ @@ -106,22 +106,22 @@ long invalid_use_of_IF_ENABLED_INT(void); /* * CONFIG_IS_ENABLED(FOO) expands to * 1 if USE_HOSTCC is defined and CONFIG_TOOLS_FOO is set to 'y', - * 1 if CONFIG_SPL_BUILD is undefined and CONFIG_FOO is set to 'y', - * 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', + * 1 if CONFIG_XPL_BUILD is undefined and CONFIG_FOO is set to 'y', + * 1 if CONFIG_XPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', * 1 if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y', * 0 otherwise. * * CONFIG_IS_ENABLED(FOO, (abc)) expands to * abc if USE_HOSTCC is defined and CONFIG_TOOLS_FOO is set to 'y', - * abc if CONFIG_SPL_BUILD is undefined and CONFIG_FOO is set to 'y', - * abc if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', + * abc if CONFIG_XPL_BUILD is undefined and CONFIG_FOO is set to 'y', + * abc if CONFIG_XPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', * abc if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y', * nothing otherwise. * * CONFIG_IS_ENABLED(FOO, (abc), (def)) expands to * abc if USE_HOSTCC is defined and CONFIG_TOOLS_FOO is set to 'y', - * abc if CONFIG_SPL_BUILD is undefined and CONFIG_FOO is set to 'y', - * abc if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', + * abc if CONFIG_XPL_BUILD is undefined and CONFIG_FOO is set to 'y', + * abc if CONFIG_XPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', * abc if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y', * def otherwise. * diff --git a/include/log.h b/include/log.h index 7c25bf0b081..371f99d82e7 100644 --- a/include/log.h +++ b/include/log.h @@ -246,7 +246,7 @@ int _log_buffer(enum log_category_t cat, enum log_level_t level, #define _DEBUG 0 #endif
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define _SPL_BUILD 1 #else #define _SPL_BUILD 0 diff --git a/include/mmc.h b/include/mmc.h index 0044ff8bef7..e4b960b7294 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -726,7 +726,7 @@ struct mmc { u64 capacity_boot; u64 capacity_rpmb; u64 capacity_gp[4]; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD u64 enh_user_start; u64 enh_user_size; #endif diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index f4aecaac75f..be292e3ceb2 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -163,7 +163,7 @@ struct cfi_pri_hdr { #if defined(CONFIG_SYS_MAX_FLASH_BANKS_DETECT) /* map to cfi_flash_num_flash_banks only when supported */ #if IS_ENABLED(CONFIG_FLASH_CFI_DRIVER) && \ - (!IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_SPL_MTD)) + (!IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_SPL_MTD)) #define CFI_FLASH_BANKS (cfi_flash_num_flash_banks) /* board code can update this variable before CFI detection */ extern int cfi_flash_num_flash_banks; diff --git a/include/net.h b/include/net.h index bb2ae20f52a..dc8b5e9cc34 100644 --- a/include/net.h +++ b/include/net.h @@ -683,7 +683,7 @@ int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport, /* Processes a received packet */ void net_process_received_packet(uchar *in_packet, int len);
-#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD) void nc_start(void); int nc_input_packet(uchar *pkt, struct in_addr src_ip, unsigned dest_port, unsigned src_port, unsigned len); @@ -691,7 +691,7 @@ int nc_input_packet(uchar *pkt, struct in_addr src_ip, unsigned dest_port,
static __always_inline int eth_is_on_demand_init(void) { -#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD) extern enum proto_t net_loop_last_protocol;
return net_loop_last_protocol != NETCONS; @@ -702,7 +702,7 @@ static __always_inline int eth_is_on_demand_init(void)
static inline void eth_set_last_protocol(int protocol) { -#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD) extern enum proto_t net_loop_last_protocol;
net_loop_last_protocol = protocol; diff --git a/include/part.h b/include/part.h index 797b542ef1f..92662677551 100644 --- a/include/part.h +++ b/include/part.h @@ -439,7 +439,7 @@ ulong disk_blk_erase(struct udevice *dev, lbaint_t start, lbaint_t blkcnt); * We don't support printing partition information in SPL and only support * getting partition information in a few cases. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD # define part_print_ptr(x) NULL # if defined(CONFIG_SPL_FS_EXT4) || defined(CONFIG_SPL_FS_FAT) || \ defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION) diff --git a/include/sdp.h b/include/sdp.h index 5492f9c47d2..0a97f28073a 100644 --- a/include/sdp.h +++ b/include/sdp.h @@ -11,7 +11,7 @@
int sdp_init(struct udevice *udc);
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <spl.h>
int spl_sdp_handle(struct udevice *udc, struct spl_image_info *spl_image, diff --git a/include/search.h b/include/search.h index 7faf23f4aca..3952198a0df 100644 --- a/include/search.h +++ b/include/search.h @@ -29,7 +29,7 @@ enum env_action { struct env_entry { const char *key; char *data; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int (*callback)(const char *name, const char *value, enum env_op op, int flags); #endif diff --git a/include/spl.h b/include/spl.h index de808ccd413..dd9aeeaf9cc 100644 --- a/include/spl.h +++ b/include/spl.h @@ -51,7 +51,7 @@ static inline bool u_boot_first_phase(void) if (IS_ENABLED(CONFIG_TPL_BUILD)) return true; } else if (IS_ENABLED(CONFIG_SPL)) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return true; } else { return true; @@ -90,7 +90,7 @@ enum u_boot_phase { * * To include code only in SPL, you might do: * - * #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) + * #if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD) * ... * #endif * @@ -102,7 +102,7 @@ enum u_boot_phase { * * To include code only in U-Boot proper, you might do: * - * #ifndef CONFIG_SPL_BUILD + * #ifndef CONFIG_XPL_BUILD * ... * #endif * @@ -120,7 +120,7 @@ static inline enum u_boot_phase spl_phase(void) return PHASE_TPL; #elif defined(CONFIG_VPL_BUILD) return PHASE_VPL; -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) return PHASE_SPL; #else DECLARE_GLOBAL_DATA_PTR; @@ -135,7 +135,7 @@ static inline enum u_boot_phase spl_phase(void) /* returns true if in U-Boot proper, false if in SPL */ static inline bool spl_in_proper(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD return false; #endif
@@ -154,7 +154,7 @@ static inline enum u_boot_phase spl_prev_phase(void) return PHASE_NONE; #elif defined(CONFIG_VPL_BUILD) return PHASE_TPL; /* VPL requires TPL */ -#elif defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_XPL_BUILD) return IS_ENABLED(CONFIG_VPL) ? PHASE_VPL : IS_ENABLED(CONFIG_TPL) ? PHASE_TPL : PHASE_NONE; @@ -227,7 +227,7 @@ static inline const char *spl_phase_prefix(enum u_boot_phase phase) }
/* A string name for SPL or TPL */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD # ifdef CONFIG_TPL_BUILD # define SPL_TPL_NAME "TPL" # elif defined(CONFIG_VPL_BUILD) diff --git a/include/stdio.h b/include/stdio.h index 7b999a519ba..56609b846ff 100644 --- a/include/stdio.h +++ b/include/stdio.h @@ -9,9 +9,9 @@ int getchar(void); int tstc(void);
/* stdout */ -#if !defined(CONFIG_SPL_BUILD) || \ +#if !defined(CONFIG_XPL_BUILD) || \ (defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_SERIAL)) || \ - (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) && \ + (defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD) && \ defined(CONFIG_SPL_SERIAL)) void putc(const char c); void puts(const char *s); diff --git a/include/sunxi_gpio.h b/include/sunxi_gpio.h index db3742c0397..122987c395e 100644 --- a/include/sunxi_gpio.h +++ b/include/sunxi_gpio.h @@ -206,7 +206,7 @@ void sunxi_gpio_set_pull(u32 pin, u32 val); void sunxi_gpio_set_pull_bank(void *bank_base, int pin_offset, u32 val); int sunxi_name_to_gpio(const char *name);
-#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO +#if !defined CONFIG_XPL_BUILD && defined CONFIG_AXP_GPIO int axp_gpio_init(void); #else static inline int axp_gpio_init(void) { return 0; } diff --git a/include/upl.h b/include/upl.h index 2ec5ef1b5cf..4d0eca88047 100644 --- a/include/upl.h +++ b/include/upl.h @@ -320,7 +320,7 @@ int upl_read_handoff(struct upl *upl, oftree tree); int upl_get_test_data(struct unit_test_state *uts, struct upl *upl); #endif /* USE_HOSTCC */
-#if CONFIG_IS_ENABLED(UPL) && defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(UPL) && defined(CONFIG_XPL_BUILD)
/** * upl_set_fit_info() - Set up basic info about the FIT @@ -367,7 +367,7 @@ int _upl_add_image(int node, ulong load_addr, ulong size, const char *desc); static inline int upl_add_image(const void *fit, int node, ulong load_addr, ulong size) { - if (CONFIG_IS_ENABLED(UPL) && IS_ENABLED(CONFIG_SPL_BUILD)) { + if (CONFIG_IS_ENABLED(UPL) && IS_ENABLED(CONFIG_XPL_BUILD)) { const char *desc = fdt_getprop(fit, node, FIT_DESC_PROP, NULL);
return _upl_add_image(node, load_addr, size, desc); diff --git a/include/vbe.h b/include/vbe.h index 5ede8181b98..56bff63362f 100644 --- a/include/vbe.h +++ b/include/vbe.h @@ -41,7 +41,7 @@ struct vbe_handoff { */ static inline enum vbe_phase_t vbe_phase(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return VBE_PHASE_FIRMWARE;
return VBE_PHASE_OS; diff --git a/lib/Makefile b/lib/Makefile index d300249f57c..66f84408aae 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_EFI) += efi/ obj-$(CONFIG_EFI_LOADER) += efi_driver/ @@ -96,7 +96,7 @@ obj-$(CONFIG_LIBAVB) += libavb/ obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/ obj-$(CONFIG_$(SPL_TPL_)OF_REAL) += fdtdec_common.o fdtdec.o
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16-ccitt.o obj-$(CONFIG_$(SPL_TPL_)HASH) += crc16-ccitt.o obj-$(CONFIG_MMC_SPI_CRC_ON) += crc16-ccitt.o @@ -131,7 +131,7 @@ obj-$(CONFIG_LIB_UUID) += uuid.o obj-$(CONFIG_LIB_RAND) += rand.o obj-y += panic.o
-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) # SPL U-Boot may use full-printf, tiny-printf or none at all ifdef CONFIG_$(SPL_TPL_)USE_TINY_PRINTF obj-$(CONFIG_$(SPL_TPL_)SPRINTF) += tiny-printf.o diff --git a/lib/crypto/Makefile b/lib/crypto/Makefile index bec1bc95a65..3259c951241 100644 --- a/lib/crypto/Makefile +++ b/lib/crypto/Makefile @@ -18,12 +18,12 @@ rsa_public_key-y := \ rsa_helper.o
$(obj)/rsapubkey.asn1.o: $(obj)/rsapubkey.asn1.c $(obj)/rsapubkey.asn1.h -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD CFLAGS_rsapubkey.asn1.o += -I$(obj) endif
$(obj)/rsa_helper.o: $(obj)/rsapubkey.asn1.h -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD CFLAGS_rsa_helper.o += -I$(obj) endif
diff --git a/lib/display_options.c b/lib/display_options.c index d5df53ab15f..2c15cc5b5c4 100644 --- a/lib/display_options.c +++ b/lib/display_options.c @@ -236,7 +236,7 @@ int print_buffer(ulong addr, const void *data, uint width, uint count, addr += thislinelen * width; count -= thislinelen;
- if (!IS_ENABLED(CONFIG_SPL_BUILD) && ctrlc()) + if (!IS_ENABLED(CONFIG_XPL_BUILD) && ctrlc()) return -EINTR; }
diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 5edc8dd2f9f..4199379c872 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -1230,7 +1230,7 @@ static void *fdt_find_separate(void) if (IS_ENABLED(CONFIG_SANDBOX)) return NULL;
-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* FDT is at end of BSS unless it is in a different memory region */ if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS)) fdt_blob = (ulong *)_image_binary_end; @@ -1714,7 +1714,7 @@ int fdtdec_setup(void) }
/* Allow the early environment to override the fdt address */ - if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { ulong addr;
addr = env_get_hex("fdtcontroladdr", 0); diff --git a/lib/hang.c b/lib/hang.c index 3cfb06e9ca8..f3c3c896f0a 100644 --- a/lib/hang.c +++ b/lib/hang.c @@ -22,7 +22,7 @@ */ void hang(void) { -#if !defined(CONFIG_SPL_BUILD) || \ +#if !defined(CONFIG_XPL_BUILD) || \ (CONFIG_IS_ENABLED(LIBCOMMON_SUPPORT) && \ CONFIG_IS_ENABLED(SERIAL)) puts("### ERROR ### Please RESET the board ###\n"); diff --git a/lib/hashtable.c b/lib/hashtable.c index 9613adc5540..e8a59e2dcac 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -221,7 +221,7 @@ static int do_callback(const struct env_entry *e, const char *name, const char *value, enum env_op op, int flags) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (e->callback) return e->callback(name, value, op, flags); #endif @@ -487,7 +487,7 @@ int hdelete_r(const char *key, struct hsearch_data *htab, int flag) return 0; }
-#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV)) +#if !(defined(CONFIG_XPL_BUILD) && !defined(CONFIG_SPL_SAVEENV)) /* * hexport() */ diff --git a/lib/hexdump.c b/lib/hexdump.c index 2bc508ff504..29feccd60fc 100644 --- a/lib/hexdump.c +++ b/lib/hexdump.c @@ -157,7 +157,7 @@ int print_hex_dump(const char *prefix_str, int prefix_type, int rowsize, printf("%s%s\n", prefix_str, linebuf); break; } - if (!IS_ENABLED(CONFIG_SPL_BUILD) && ctrlc()) + if (!IS_ENABLED(CONFIG_XPL_BUILD) && ctrlc()) return -EINTR; }
diff --git a/lib/uuid.c b/lib/uuid.c index 11b86ffb02e..c6a27b7d044 100644 --- a/lib/uuid.c +++ b/lib/uuid.c @@ -477,7 +477,7 @@ void gen_rand_uuid_str(char *uuid_str, int str_format) uuid_bin_to_str(uuid_bin, uuid_str, str_format); }
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CMD_UUID) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_CMD_UUID) int do_uuid(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { char uuid[UUID_STR_LEN + 1]; diff --git a/net/bootp.c b/net/bootp.c index 512ab2ed7c8..afd5b48094a 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -434,7 +434,7 @@ static u8 *add_vci(u8 *e) char *vci = NULL; char *env_vci = env_get("bootp_vci");
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_NET_VCI_STRING) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_NET_VCI_STRING) vci = CONFIG_SPL_NET_VCI_STRING; #elif defined(CONFIG_BOOTP_VCI_STRING) vci = CONFIG_BOOTP_VCI_STRING; diff --git a/net/net.c b/net/net.c index 1e0b7c85624..fd7d413e488 100644 --- a/net/net.c +++ b/net/net.c @@ -305,7 +305,7 @@ U_BOOT_ENV_CALLBACK(dnsip, on_dnsip); */ void net_auto_load(void) { -#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_XPL_BUILD) const char *s = env_get("autoload");
if (s != NULL && strcmp(s, "NFS") == 0) { @@ -559,7 +559,7 @@ restart: ping6_start(); break; #endif -#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_XPL_BUILD) case NFS: nfs_start(); break; @@ -574,7 +574,7 @@ restart: cdp_start(); break; #endif -#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD) case NETCONS: nc_start(); break; @@ -1439,7 +1439,7 @@ void net_process_received_packet(uchar *in_packet, int len) } }
-#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD) nc_input_packet((uchar *)ip + IP_UDP_HDR_SIZE, src_ip, ntohs(ip->udp_dst), diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 5daceb26061..b70b75ee68d 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -324,7 +324,7 @@ endif # do not delete intermediate files automatically .SECONDARY:
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD SPL_ := SPL_ ifeq ($(CONFIG_VPL_BUILD),y) SPL_TPL_ := VPL_ diff --git a/scripts/Makefile.xpl b/scripts/Makefile.xpl index ad21d451a30..63d4ec334bc 100644 --- a/scripts/Makefile.xpl +++ b/scripts/Makefile.xpl @@ -31,7 +31,7 @@ include $(srctree)/scripts/Kbuild.include UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)
KBUILD_CPPFLAGS += -DCONFIG_XPL_BUILD -KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD +KBUILD_CPPFLAGS += -DCONFIG_XPL_BUILD ifeq ($(CONFIG_TPL_BUILD),y) KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD else @@ -55,7 +55,7 @@ endif
export SPL_NAME
-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD SPL_ := SPL_ ifeq ($(CONFIG_VPL_BUILD),y) SPL_TPL_ := VPL_ diff --git a/test/Makefile b/test/Makefile index ed312cd0a48..f801d87e385 100644 --- a/test/Makefile +++ b/test/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_$(SPL_)CMDLINE) += str_ut.o obj-$(CONFIG_UT_TIME) += time_ut.o obj-y += ut.o
-ifeq ($(CONFIG_SPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD),) obj-y += boot/ obj-$(CONFIG_UNIT_TEST) += common/ obj-y += log/ diff --git a/test/cmd_ut.c b/test/cmd_ut.c index 38ba89ee33e..53fddebd49d 100644 --- a/test/cmd_ut.c +++ b/test/cmd_ut.c @@ -256,7 +256,7 @@ U_BOOT_LONGHELP(ut, "\ntime - very basic test of time functions" #endif #if defined(CONFIG_UT_UNICODE) && \ - !defined(CONFIG_SPL_BUILD) && !defined(API_BUILD) + !defined(CONFIG_XPL_BUILD) && !defined(API_BUILD) "\nunicode - Unicode functions" #endif ); diff --git a/test/dm/Makefile b/test/dm/Makefile index c12589d487c..c6c63051e0b 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_UT_DM) += test-dm.o
# Tests for particular subsystems - when enabling driver model for a new # subsystem you must add sandbox tests here. -ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_SPL_OF_PLATDATA) += of_platdata.o else obj-$(CONFIG_UT_DM) += bus.o diff --git a/test/lib/Makefile b/test/lib/Makefile index 70f14c46b1e..a54387a058e 100644 --- a/test/lib/Makefile +++ b/test/lib/Makefile @@ -2,7 +2,7 @@ # # (C) Copyright 2018 # Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc -ifeq ($(CONFIG_SPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD),) obj-y += cmd_ut_lib.o obj-y += abuf.o obj-y += alist.o diff --git a/test/test-main.c b/test/test-main.c index b3d3e24cdce..479dbb33b72 100644 --- a/test/test-main.c +++ b/test/test-main.c @@ -47,7 +47,7 @@ enum fdtchk_t { static enum fdtchk_t fdt_action(void) { /* For sandbox SPL builds, do nothing */ - if (IS_ENABLED(CONFIG_SANDBOX) && IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_SANDBOX) && IS_ENABLED(CONFIG_XPL_BUILD)) return FDTCHK_NONE;
/* Do a copy for sandbox (but only the U-Boot build, not SPL) */ diff --git a/tools/binman/test/generated/autoconf.h b/tools/binman/test/generated/autoconf.h index 6a23039f469..75af48f9116 100644 --- a/tools/binman/test/generated/autoconf.h +++ b/tools/binman/test/generated/autoconf.h @@ -1,3 +1,3 @@ #define CONFIG_BINMAN 1 -#define CONFIG_SPL_BUILD 1 +#define CONFIG_XPL_BUILD 1 #define CONFIG_SPL_BINMAN_SYMBOLS 1