Hi Peter,
On Mon, Sep 25, 2017 at 3:54 PM, Peter Robinson pbrobinson@gmail.com wrote:
Hi Fabio,
I'm seeing some issues with some of the i.MX6 devices with the latest stable release. It loads the SPL and then just seems to loop:
U-Boot SPL 2017.09 (Sep 25 2017 - 18:42:10) Trying to boot from MMC1
U-Boot SPL 2017.09 (Sep 25 2017 - 18:42:10) Trying to boot from MMC1
U-Boot SPL 2017.09 (Sep 25 2017 - 18:42:10) Trying to boot from MMC1
This is built on Fedora with latest gcc7 so I'm not sure if that's a possible issue. Is this something people are aware of and I've missed the fix.
I haven't tested it with gcc7 yet, but if I use gcc6 I do not see the problem:
U-Boot SPL 2017.09 (Sep 25 2017 - 15:55:59) Trying to boot from MMC1
U-Boot 2017.09 (Sep 25 2017 - 15:55:59 -0300)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard rev B1 I2C: ready DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 =>
So maybe this issue could be related to gcc7?