+QEMU developers ML
On Thu, Oct 3, 2019 at 7:37 PM Waseem ALKurdi waseem19992009@outlook.com wrote:
Dear all,
I'm trying to get mainline U-Boot to boot on mainline QEMU 4.1.0 for the 'sabrelite' board, using the configuration 'mx6qsabrelite_defconfig'.
It's not booting at all. Actually, not a single U-Boot build for an i.MX board would boot, with the exception of 'imx25-pdk'.
I'm compiling U-Boot by un-tarring the source tarball and running the following commands:
$ time CROSS_COMPILE=/path/to/toolchain/arm-2014.05/bin/arm-none-linux-gnueabi- make ARCH=arm clean $ time CROSS_COMPILE=/path/to/toolchain/arm-2014.05/bin/arm-none-linux-gnueabi- make ARCH=arm mrproper $ time CROSS_COMPILE=/path/to/toolchain/arm-2014.05/bin/arm-none-linux-gnueabi- make ARCH=arm mx6qsabrelite_defconfig
then after the build finishes:
$ qemu-system-arm -M sabrelite -m 512M -kernel ~/Downloads/u-boot-2019.10-rc3/u-boot.imx -monitor stdio
And other variations on this command as well. No amount of kernel commandline options or anything would make it boot. What should I do?
I suspect mainline QEMU sabrelite machine only supports booting the Linux kernel directly, but not booting U-Boot.
Regards, Bin