Re: [PATCH 2/3] usb: ehci-mx6: add IMX8MM OTG support

On 4/27/21 7:08 PM, Tim Harvey wrote:

Add support for determining host vs peripheral mode for IMX8MM configured as OTG.

Signed-off-by: Tim Harvey tharvey@gateworks.com

drivers/usb/host/ehci-mx6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index c2dfe49012..d055d2b1fe 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -523,7 +523,7 @@ static int ehci_usb_phy_mode(struct udevice *dev) plat->init_type = USB_INIT_DEVICE; else plat->init_type = USB_INIT_HOST;

• } else if (is_mx7()) {

• } else if (is_mx7() || is_imx8mm()) {

This likely also applies to 8mq/mm/mn/mp , i.e. all of them.