[U-Boot] [PATCH v2 11/14] imx: ventana: add GW5904 support

17 Mar 2017

Signed-off-by: Tim Harvey tharvey@gateworks.com
---
v2:
- remove unnecessary error print on registering esdhc
- register mmc_cd gpio once
- move PHYLIB to defconfigs
Signed-off-by: Tim Harvey tharvey@gateworks.com
---
 board/gateworks/gw_ventana/common.c         | 224 ++++++++++++++++++++++++++--
 board/gateworks/gw_ventana/common.h         |   2 +-
 board/gateworks/gw_ventana/eeprom.c         |   9 +-
 board/gateworks/gw_ventana/gw_ventana.c     |  35 ++++-
 board/gateworks/gw_ventana/gw_ventana_spl.c |  14 ++
 board/gateworks/gw_ventana/ventana_eeprom.h |   1 +
 configs/gwventana_emmc_defconfig            |   1 +
 configs/gwventana_gw5904_defconfig          |  68 +++++++++
 configs/gwventana_nand_defconfig            |   1 +
 include/configs/gw_ventana.h                |   1 -
 10 files changed, 340 insertions(+), 16 deletions(-)
 create mode 100644 configs/gwventana_gw5904_defconfig

diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 3dc5f88..d609894 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -38,6 +38,19 @@ void setup_iomux_uart(void)
 }
/* MMC */
+static iomux_v3_cfg_t const gw5904_emmc_pads[] = {
+	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_RST__SD3_RESET  | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
 static iomux_v3_cfg_t const usdhc3_pads[] = {
    IOMUX_PADS(PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
    IOMUX_PADS(PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
@@ -352,6 +365,41 @@ static iomux_v3_cfg_t const gw553x_gpio_pads[] = {
    IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
 };
+static iomux_v3_cfg_t const gw5904_gpio_pads[] = {
+	/* USB_HUBRST# */
+	IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
+	/* PANLEDG# */
+	IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
+	/* PANLEDR# */
+	IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
+	/* MX6_LOCLED# */
+	IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
+	/* IOEXP_PWREN# */
+	IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
+	/* IOEXP_IRQ# */
+	IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
+	/* DIOI2C_DIS# */
+	IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
+	/* UART_RS485 */
+	IOMUX_PADS(PAD_DISP0_DAT2__GPIO4_IO23 | DIO_PAD_CFG),
+	/* UART_HALF */
+	IOMUX_PADS(PAD_DISP0_DAT3__GPIO4_IO24 | DIO_PAD_CFG),
+	/* SKT1_WDIS# */
+	IOMUX_PADS(PAD_DISP0_DAT17__GPIO5_IO11 | DIO_PAD_CFG),
+	/* SKT1_RST# */
+	IOMUX_PADS(PAD_DISP0_DAT18__GPIO5_IO12 | DIO_PAD_CFG),
+	/* SKT2_WDIS# */
+	IOMUX_PADS(PAD_DISP0_DAT19__GPIO5_IO13 | DIO_PAD_CFG),
+	/* SKT2_RST# */
+	IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG),
+	/* M2_OFF# */
+	IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15 | DIO_PAD_CFG),
+	/* M2_WDIS# */
+	IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14 | DIO_PAD_CFG),
+	/* M2_RST# */
+	IOMUX_PADS(PAD_SD2_DAT2__GPIO1_IO13 | DIO_PAD_CFG),
+};
+
 /* Digital I/O */
 struct dio_cfg gw51xx_dio[] = {
    {
@@ -566,6 +614,81 @@ struct dio_cfg gw553x_dio[] = {
    },
 };
+struct dio_cfg gw5904_dio[] = {
+	{
+		{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
+		IMX_GPIO_NR(1, 16),
+		{ 0, 0 },
+		0
+	},
+	{
+		{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
+		IMX_GPIO_NR(1, 19),
+		{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
+		2
+	},
+	{
+		{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
+		IMX_GPIO_NR(1, 17),
+		{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
+		3
+	},
+	{
+		{IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
+		IMX_GPIO_NR(1, 20),
+		{ 0, 0 },
+		0
+	},
+	{
+		{IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00) },
+		IMX_GPIO_NR(2, 0),
+		{ 0, 0 },
+		0
+	},
+	{
+		{IOMUX_PADS(PAD_NANDF_D1__GPIO2_IO01) },
+		IMX_GPIO_NR(2, 1),
+		{ 0, 0 },
+		0
+	},
+	{
+		{IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02) },
+		IMX_GPIO_NR(2, 2),
+		{ 0, 0 },
+		0
+	},
+	{
+		{IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03) },
+		IMX_GPIO_NR(2, 3),
+		{ 0, 0 },
+		0
+	},
+	{
+		{IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04) },
+		IMX_GPIO_NR(2, 4),
+		{ 0, 0 },
+		0
+	},
+	{
+		{IOMUX_PADS(PAD_NANDF_D5__GPIO2_IO05) },
+		IMX_GPIO_NR(2, 5),
+		{ 0, 0 },
+		0
+	},
+	{
+		{IOMUX_PADS(PAD_NANDF_D6__GPIO2_IO06) },
+		IMX_GPIO_NR(2, 6),
+		{ 0, 0 },
+		0
+	},
+	{
+		{IOMUX_PADS(PAD_NANDF_D7__GPIO2_IO07) },
+		IMX_GPIO_NR(2, 7),
+		{ 0, 0 },
+		0
+	},
+};
+
 /*
  * Board Specific GPIO
  */
@@ -588,6 +711,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
    	.dioi2c_en = IMX_GPIO_NR(4,  5),
    	.pcie_sson = IMX_GPIO_NR(1, 20),
    	.otgpwr_en = IMX_GPIO_NR(3, 22),
+		.mmc_cd = IMX_GPIO_NR(7, 0),
    },
/* GW51xx */
@@ -631,6 +755,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
    	.rs232_en = GP_RS232_EN,
    	.otgpwr_en = IMX_GPIO_NR(3, 22),
    	.vsel_pin = IMX_GPIO_NR(6, 14),
+		.mmc_cd = IMX_GPIO_NR(7, 0),
    },
/* GW53xx */
@@ -654,6 +779,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
    	.rs232_en = GP_RS232_EN,
    	.otgpwr_en = IMX_GPIO_NR(3, 22),
    	.vsel_pin = IMX_GPIO_NR(6, 14),
+		.mmc_cd = IMX_GPIO_NR(7, 0),
    },
/* GW54xx */
@@ -679,6 +805,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
    	.rs232_en = GP_RS232_EN,
    	.otgpwr_en = IMX_GPIO_NR(3, 22),
    	.vsel_pin = IMX_GPIO_NR(6, 14),
+		.mmc_cd = IMX_GPIO_NR(7, 0),
    },
/* GW551x */
@@ -726,6 +853,24 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
    	.wdis = IMX_GPIO_NR(7, 12),
    	.otgpwr_en = IMX_GPIO_NR(3, 22),
    	.vsel_pin = IMX_GPIO_NR(6, 14),
+		.mmc_cd = IMX_GPIO_NR(7, 0),
+	},
+
+	/* GW5904 */
+	{
+		.gpio_pads = gw5904_gpio_pads,
+		.num_pads = ARRAY_SIZE(gw5904_gpio_pads)/2,
+		.dio_cfg = gw5904_dio,
+		.dio_num = ARRAY_SIZE(gw5904_dio),
+		.leds = {
+			IMX_GPIO_NR(4, 6),
+			IMX_GPIO_NR(4, 7),
+			IMX_GPIO_NR(4, 15),
+		},
+		.pcie_rst = IMX_GPIO_NR(1, 0),
+		.mezz_pwren = IMX_GPIO_NR(2, 19),
+		.mezz_irq = IMX_GPIO_NR(2, 18),
+		.otgpwr_en = IMX_GPIO_NR(3, 22),
    },
 };
@@ -834,6 +979,30 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info)
    	gpio_direction_input(gpio_cfg[board].vsel_pin);
    	gpio_cfg[board].usd_vsel = !gpio_get_value(gpio_cfg[board].vsel_pin);
    }
+
+	/* microSD CD */
+	if (gpio_cfg[board].mmc_cd) {
+		gpio_request(gpio_cfg[board].mmc_cd, "sd_cd");
+		gpio_direction_input(gpio_cfg[board].mmc_cd);
+	}
+
+	/* Anything else board specific */
+	switch(board) {
+	case GW5904:
+		gpio_request(IMX_GPIO_NR(5, 11), "skt1_wdis#");
+		gpio_direction_output(IMX_GPIO_NR(5, 11), 1);
+		gpio_request(IMX_GPIO_NR(5, 12), "skt1_rst#");
+		gpio_direction_output(IMX_GPIO_NR(5, 12), 1);
+		gpio_request(IMX_GPIO_NR(5, 13), "skt2_wdis#");
+		gpio_direction_output(IMX_GPIO_NR(5, 13), 1);
+		gpio_request(IMX_GPIO_NR(1, 15), "m2_off#");
+		gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
+		gpio_request(IMX_GPIO_NR(1, 14), "m2_wdis#");
+		gpio_direction_output(IMX_GPIO_NR(1, 14), 1);
+		gpio_request(IMX_GPIO_NR(1, 13), "m2_rst#");
+		gpio_direction_output(IMX_GPIO_NR(1, 13), 1);
+		break;
+	}
 }
/* setup GPIO pinmux and default configuration per baseboard and env */
@@ -995,19 +1164,56 @@ static struct fsl_esdhc_cfg usdhc_cfg = { USDHC3_BASE_ADDR };
int board_mmc_init(bd_t *bis)
 {
-	/* Only one USDHC controller on Ventana */
-	SETUP_IOMUX_PADS(usdhc3_pads);
-	usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-	usdhc_cfg.max_bus_width = 4;
-
-	return fsl_esdhc_initialize(bis, &usdhc_cfg);
+	struct ventana_board_info ventana_info;
+	int board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
+	int ret;
+
+	switch (board_type) {
+	case GW52xx:
+	case GW53xx:
+	case GW54xx:
+	case GW553x:
+		/* usdhc3: 4bit microSD */
+		SETUP_IOMUX_PADS(usdhc3_pads);
+		usdhc_cfg.esdhc_base = USDHC3_BASE_ADDR;
+		usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+		usdhc_cfg.max_bus_width = 4;
+		return fsl_esdhc_initialize(bis, &usdhc_cfg);
+	case GW5904:
+		/* usdhc3: 8bit eMMC */
+		SETUP_IOMUX_PADS(gw5904_emmc_pads);
+		usdhc_cfg.esdhc_base = USDHC3_BASE_ADDR;
+		usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+		usdhc_cfg.max_bus_width = 8;
+		return fsl_esdhc_initialize(bis, &usdhc_cfg);
+	default:
+		/* doesn't have MMC */
+		return -1;
+	}
 }
int board_mmc_getcd(struct mmc *mmc)
 {
+	struct ventana_board_info ventana_info;
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
+	int gpio = gpio_cfg[board].mmc_cd;
+
    /* Card Detect */
-	gpio_request(GP_SD3_CD, "sd_cd");
-	gpio_direction_input(GP_SD3_CD);
-	return !gpio_get_value(GP_SD3_CD);
+	switch (board) {
+	case GW5904:
+		/* emmc is always present */
+		if (cfg->esdhc_base == USDHC3_BASE_ADDR)
+			return 1;
+		break;
+	}
+
+	if (gpio) {
+		debug("%s: gpio%d=%d\n", __func__, gpio, gpio_get_value(gpio));
+		return !gpio_get_value(gpio);
+	}
+
+	return -1;
 }
+
 #endif /* CONFIG_FSL_ESDHC */
diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h
index 18909a0..3eb4c59 100644
--- a/board/gateworks/gw_ventana/common.h
+++ b/board/gateworks/gw_ventana/common.h
@@ -13,7 +13,6 @@
/* GPIO's common to all baseboards */
 #define GP_PHY_RST	IMX_GPIO_NR(1, 30)
-#define GP_SD3_CD	IMX_GPIO_NR(7, 0)
 #define GP_RS232_EN	IMX_GPIO_NR(2, 11)
 #define GP_MSATA_SEL	IMX_GPIO_NR(2, 8)
@@ -79,6 +78,7 @@ struct ventana {
    int rs232_en;
    int otgpwr_en;
    int vsel_pin;
+	int mmc_cd;
    /* various features */
    bool usd_vsel;
 };
diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c
index 1382e5d..9a1033a 100644
--- a/board/gateworks/gw_ventana/eeprom.c
+++ b/board/gateworks/gw_ventana/eeprom.c
@@ -64,6 +64,7 @@ read_eeprom(int bus, struct ventana_board_info *info)
    if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0)
    	baseboard = '0';
+	type = GW_UNKNOWN;
    switch (baseboard) {
    case '0': /* original GW5400-A prototype */
    	type = GW54proto;
@@ -91,10 +92,10 @@ read_eeprom(int bus, struct ventana_board_info *info)
    		type = GW553x;
    		break;
    	}
-		/* fall through */
-	default:
-		printf("EEPROM: Unknown model in EEPROM: %s\n", info->model);
-		type = GW_UNKNOWN;
+		break;
+	case '9':
+		if (info->model[4] == '0' && info->model[5] == '4')
+			type = GW5904;
    	break;
    }
    return type;
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 3f9d2f7..0768799 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -132,8 +132,9 @@ static void setup_iomux_enet(int gpio)
    /* toggle PHY_RST# */
    gpio_request(gpio, "phy_rst#");
    gpio_direction_output(gpio, 0);
-	mdelay(2);
+	mdelay(10);
    gpio_set_value(gpio, 1);
+	mdelay(100);
 }
#ifdef CONFIG_USB_EHCI_MX6
@@ -232,6 +233,38 @@ int board_phy_config(struct phy_device *phydev)
    return 0;
 }
+#ifdef CONFIG_MV88E61XX_SWITCH
+int mv88e61xx_hw_reset(struct phy_device *phydev)
+{
+	struct mii_dev *bus = phydev->bus;
+
+	/* GPIO[0] output, CLK125 */
+	debug("enabling RGMII_REFCLK\n");
+	bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
+		   0x1a /*MV_SCRATCH_MISC*/,
+		   (1 << 15) | (0x62 /*MV_GPIO_DIR*/ << 8) | 0xfe);
+	bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
+		   0x1a /*MV_SCRATCH_MISC*/,
+		   (1 << 15) | (0x68 /*MV_GPIO01_CNTL*/ << 8) | 7);
+
+	/* RGMII delay - Physical Control register bit[15:14] */
+	debug("setting port%d RGMII rx/tx delay\n", CONFIG_MV88E61XX_CPU_PORT);
+	/* forced 1000mbps full-duplex link */
+	bus->write(bus, 0x10 + CONFIG_MV88E61XX_CPU_PORT, 0, 1, 0xc0fe);
+	phydev->autoneg = AUTONEG_DISABLE;
+	phydev->speed = SPEED_1000;
+	phydev->duplex = DUPLEX_FULL;
+
+	/* LED configuration: 7:4-green (8=Activity)  3:0 amber (9=10Link) */
+	bus->write(bus, 0x10, 0, 0x16, 0x8089);
+	bus->write(bus, 0x11, 0, 0x16, 0x8089);
+	bus->write(bus, 0x12, 0, 0x16, 0x8089);
+	bus->write(bus, 0x13, 0, 0x16, 0x8089);
+
+	return 0;
+}
+#endif // CONFIG_MV88E61XX_SWITCH
+
 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_FEC_MXC
diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
index 8cc2a57..136b5fc 100644
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -608,6 +608,20 @@ void board_init_f(ulong dummy)
    memset(__bss_start, 0, __bss_end - __bss_start);
 }
+void board_boot_order(u32 *spl_boot_list)
+{
+	spl_boot_list[0] = spl_boot_device();
+	switch (spl_boot_list[0]) {
+	case BOOT_DEVICE_NAND:
+		spl_boot_list[1] = BOOT_DEVICE_MMC1;
+		spl_boot_list[2] = BOOT_DEVICE_UART;
+		break;
+	case BOOT_DEVICE_MMC1:
+		spl_boot_list[1] = BOOT_DEVICE_UART;
+		break;
+	}
+}
+
 /* called from board_init_r after gd setup if CONFIG_SPL_BOARD_INIT defined */
 /* its our chance to print info about boot device */
 void spl_board_init(void)
diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h
index 9ffad58..bacaf5a 100644
--- a/board/gateworks/gw_ventana/ventana_eeprom.h
+++ b/board/gateworks/gw_ventana/ventana_eeprom.h
@@ -112,6 +112,7 @@ enum {
    GW551x,
    GW552x,
    GW553x,
+	GW5904,
    GW_UNKNOWN,
    GW_BADCRC,
 };
diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig
index 96d76e4..2788219 100644
--- a/configs/gwventana_emmc_defconfig
+++ b/configs/gwventana_emmc_defconfig
@@ -45,6 +45,7 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_UBI=y
 CONFIG_DM=y
+CONFIG_PHYLIB=y
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_PCI=y
diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig
new file mode 100644
index 0000000..7369d23
--- /dev/null
+++ b/configs/gwventana_gw5904_defconfig
@@ -0,0 +1,68 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_GW_VENTANA=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_VIDEO=y
+CONFIG_SPL_STACK_R_ADDR=0x18000000
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
+CONFIG_BOOTDELAY=3
+# CONFIG_SYS_STDIO_DEREGISTER is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_DMA_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Ventana > "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_UBI=y
+CONFIG_DM=y
+CONFIG_PHYLIB=y
+CONFIG_MV88E61XX_SWITCH=y
+CONFIG_MV88E61XX_CPU_PORT=5
+CONFIG_MV88E61XX_PHY_PORTS=0xf
+CONFIG_MV88E61XX_FIXED_PORTS=0x0
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Gateworks"
+CONFIG_G_DNL_VENDOR_NUM=0x0525
+CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y
+CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig
index 6cc5897..e1e5200 100644
--- a/configs/gwventana_nand_defconfig
+++ b/configs/gwventana_nand_defconfig
@@ -46,6 +46,7 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_UBI=y
 CONFIG_DM=y
+CONFIG_PHYLIB=y
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_PCI=y
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 1606f20..881f870 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -152,7 +152,6 @@
 #define IMX_FEC_BASE             ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE      RGMII
 #define CONFIG_FEC_MXC_PHYADDR   0
-#define CONFIG_PHYLIB
 #define CONFIG_ARP_TIMEOUT       200UL
/* USB Configs */
-- 
2.7.4


    