On 8 February 2016 at 02:27, Mateusz Kulikowski mateusz.kulikowski@gmail.com wrote:
First supported chip is APQ8016 (that is compatible with MSM8916). Drivers in SoC code:
- Reset controller (PSHOLD)
- Clock controller (very simple clock configuration for MMC and UART)
Signed-off-by: Mateusz Kulikowski mateusz.kulikowski@gmail.com Reviewed-by: Simon Glass sjg@chromium.org Tested-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2:
- Rename DM_SPMI -> SPMI
- Make MND divider comments more compact :)
- p -> priv
- Add reviewed-by
- Reordered Kconfig to keep alphabetical order
- Renamed reset_sandbox -> msm_reset (typo in reset.c)
Changes in v1:
- Fix include order
- Cleanup defines (added spaces for readibility)
- Base address is integer to avoid casting
- Use setbits_* family where possible
- Drop unneded comments, added newlines where needed
- Check return value of dev_get_addr
- Add binding for apq8016
- Cleaned up divider calculation
- Drop most of gpio.h (only empty file is needed)
arch/arm/Kconfig | 12 + arch/arm/Makefile | 1 + arch/arm/mach-snapdragon/Kconfig | 6 + arch/arm/mach-snapdragon/Makefile | 8 + arch/arm/mach-snapdragon/clock-apq8016.c | 262 +++++++++++++++++++++ arch/arm/mach-snapdragon/include/mach/gpio.h | 9 + .../mach-snapdragon/include/mach/sysmap-apq8016.h | 14 ++ arch/arm/mach-snapdragon/reset.c | 40 ++++ 8 files changed, 352 insertions(+) create mode 100644 arch/arm/mach-snapdragon/Kconfig create mode 100644 arch/arm/mach-snapdragon/Makefile create mode 100644 arch/arm/mach-snapdragon/clock-apq8016.c create mode 100644 arch/arm/mach-snapdragon/include/mach/gpio.h create mode 100644 arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h create mode 100644 arch/arm/mach-snapdragon/reset.c
I think mach-qcom looks readable, I understand snapdragon is an soc name but why can't we place all qcom soc code to mach-qcom (I think Linux also doing the same)?
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d2dbb1a..f16d0d9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -504,6 +504,16 @@ config RMOBILE bool "Renesas ARM SoCs" select CPU_V7
+config ARCH_SNAPDRAGON
bool "Qualcomm Snapdragon SoCs"select ARM64select DMselect DM_GPIOselect DM_SERIALselect SPMIselect OF_CONTROLselect OF_SEPARATEconfig ARCH_SOCFPGA bool "Altera SOCFPGA family" select CPU_V7 @@ -760,6 +770,8 @@ source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-s5pc1xx/Kconfig"
+source "arch/arm/mach-snapdragon/Kconfig"
source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/mach-stm32/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index cd7d880..661de56 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -54,6 +54,7 @@ machine-$(CONFIG_ARCH_MVEBU) += mvebu # TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X machine-$(CONFIG_ORION5X) += orion5x machine-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx +machine-$(CONFIG_ARCH_SNAPDRAGON) += snapdragon machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_STM32) += stm32 diff --git a/arch/arm/mach-snapdragon/Kconfig b/arch/arm/mach-snapdragon/Kconfig new file mode 100644 index 0000000..156e733 --- /dev/null +++ b/arch/arm/mach-snapdragon/Kconfig @@ -0,0 +1,6 @@ +if ARCH_SNAPDRAGON
+config SYS_SOC
default "snapdragon"+endif diff --git a/arch/arm/mach-snapdragon/Makefile b/arch/arm/mach-snapdragon/Makefile new file mode 100644 index 0000000..8e84705 --- /dev/null +++ b/arch/arm/mach-snapdragon/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2015 Mateusz Kulikowski mateusz.kulikowski@gmail.com +# +# SPDX-License-Identifier: GPL-2.0+ +#
+obj-y += clock-apq8016.o +obj-y += reset.o diff --git a/arch/arm/mach-snapdragon/clock-apq8016.c b/arch/arm/mach-snapdragon/clock-apq8016.c new file mode 100644 index 0000000..d548d75 --- /dev/null +++ b/arch/arm/mach-snapdragon/clock-apq8016.c @@ -0,0 +1,262 @@ +/*
- Clock drivers for Qualcomm APQ8016
- (C) Copyright 2015 Mateusz Kulikowski mateusz.kulikowski@gmail.com
- Based on Little Kernel driver, simplified
- SPDX-License-Identifier: BSD-3-Clause
- */
+#include <common.h> +#include <clk.h> +#include <dm.h> +#include <errno.h> +#include <asm/io.h> +#include <linux/bitops.h>
+/* GPLL0 clock control registers */ +#define GPLL0_STATUS 0x2101C +#define GPLL0_STATUS_ACTIVE BIT(17)
+#define APCS_GPLL_ENA_VOTE 0x45000 +#define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0)
+/* vote reg for blsp1 clock */ +#define APCS_CLOCK_BRANCH_ENA_VOTE 0x45004 +#define APCS_CLOCK_BRANCH_ENA_VOTE_BLSP1 BIT(10)
+/* SDC(n) clock control registers; n=1,2 */
+/* block control register */ +#define SDCC_BCR(n) ((n * 0x1000) + 0x41000) +/* cmd */ +#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004) +/* cfg */ +#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008) +/* m */ +#define SDCC_M(n) ((n * 0x1000) + 0x4100C) +/* n */ +#define SDCC_N(n) ((n * 0x1000) + 0x41010) +/* d */ +#define SDCC_D(n) ((n * 0x1000) + 0x41014) +/* branch control */ +#define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018) +#define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C)
+/* BLSP1 AHB clock (root clock for BLSP) */ +#define BLSP1_AHB_CBCR 0x1008
+/* Uart clock control registers */ +#define BLSP1_UART2_BCR 0x3028 +#define BLSP1_UART2_APPS_CBCR 0x302C +#define BLSP1_UART2_APPS_CMD_RCGR 0x3034 +#define BLSP1_UART2_APPS_CFG_RCGR 0x3038 +#define BLSP1_UART2_APPS_M 0x303C +#define BLSP1_UART2_APPS_N 0x3040 +#define BLSP1_UART2_APPS_D 0x3044
+/* CBCR register fields */ +#define CBCR_BRANCH_ENABLE_BIT BIT(0) +#define CBCR_BRANCH_OFF_BIT BIT(31)
+struct msm_clk_priv {
phys_addr_t base;+};
+/* Enable clock controlled by CBC soft macro */ +static void clk_enable_cbc(phys_addr_t cbcr) +{
setbits_le32(cbcr, CBCR_BRANCH_ENABLE_BIT);while (readl(cbcr) & CBCR_BRANCH_OFF_BIT);+}
+/* clock has 800MHz */ +static void clk_enable_gpll0(phys_addr_t base) +{
if (readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE)return; /* clock already enabled */setbits_le32(base + APCS_GPLL_ENA_VOTE, APCS_GPLL_ENA_VOTE_GPLL0);while ((readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE) == 0);+}
+#define APPS_CMD_RGCR_UPDATE BIT(0)
+/* Update clock command via CMD_RGCR */ +static void clk_bcr_update(phys_addr_t apps_cmd_rgcr) +{
setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE);/* Wait for frequency to be updated. */while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE);+}
+struct bcr_regs {
uintptr_t cfg_rcgr;uintptr_t cmd_rcgr;uintptr_t M;uintptr_t N;uintptr_t D;+};
+/* RCGR_CFG register fields */ +#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */
+/* sources */ +#define CFG_CLK_SRC_CXO (0 << 8) +#define CFG_CLK_SRC_GPLL0 (1 << 8) +#define CFG_CLK_SRC_MASK (7 << 8)
+/* Mask for supported fields */ +#define CFG_MASK 0x3FFF
+#define CFG_DIVIDER_MASK 0x1F
+/* root set rate for clocks with half integer and MND divider */ +static void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
int div, int m, int n, int source)+{
uint32_t cfg;/* M value for MND divider. */uint32_t m_val = m;/* NOT(N-M) value for MND divider. */uint32_t n_val = ~((n)-(m)) * !!(n);/* NOT 2D value for MND divider. */uint32_t d_val = ~(n);/* Program MND values */writel(m_val, base + regs->M);writel(n_val, base + regs->N);writel(d_val, base + regs->D);/* setup src select and divider */cfg = readl(base + regs->cfg_rcgr);cfg &= ~CFG_MASK;cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source *//* Set the divider; HW permits fraction dividers (+0.5), butfor simplicity, we will support integers only */if (div)cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;if (n_val)cfg |= CFG_MODE_DUAL_EDGE;writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration *//* Inform h/w to start using the new config. */clk_bcr_update(base + regs->cmd_rcgr);+}
+static const struct bcr_regs sdc_regs[] = {
{.cfg_rcgr = SDCC_CFG_RCGR(1),.cmd_rcgr = SDCC_CMD_RCGR(1),.M = SDCC_M(1),.N = SDCC_N(1),.D = SDCC_D(1),},{.cfg_rcgr = SDCC_CFG_RCGR(2),.cmd_rcgr = SDCC_CMD_RCGR(2),.M = SDCC_M(2),.N = SDCC_N(2),.D = SDCC_D(2),}+};
+/* Init clock for SDHCI controller */ +static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) +{
int div = 8; /* 100MHz default */if (rate == 200000000)div = 4;clk_enable_cbc(priv->base + SDCC_AHB_CBCR(slot));/* 800Mhz/div, gpll0 */clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0,CFG_CLK_SRC_GPLL0);clk_enable_gpll0(priv->base);clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot));return rate;+}
+static const struct bcr_regs uart2_regs = {
.cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR,.cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR,.M = BLSP1_UART2_APPS_M,.N = BLSP1_UART2_APPS_N,.D = BLSP1_UART2_APPS_D,+};
+/* Init UART clock, 115200 */ +static int clk_init_uart(struct msm_clk_priv *priv) +{
/* Enable iface clk */clk_enable_cbc(priv->base + BLSP1_AHB_CBCR);/* 7372800 uart block clock @ GPLL0 */clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625,CFG_CLK_SRC_GPLL0);clk_enable_gpll0(priv->base);/* Enable core clk */clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR);return 0;+}
+ulong msm_set_periph_rate(struct udevice *dev, int periph, ulong rate) +{
struct msm_clk_priv *priv = dev_get_priv(dev);switch (periph) {case 0: /* SDC1 */return clk_init_sdc(priv, 0, rate);break;case 1: /* SDC2 */return clk_init_sdc(priv, 1, rate);break;case 4: /* UART2 */return clk_init_uart(priv);break;default:return 0;}+}
+static int msm_clk_probe(struct udevice *dev) +{
struct msm_clk_priv *priv = dev_get_priv(dev);priv->base = dev_get_addr(dev);if (priv->base == FDT_ADDR_T_NONE)return -EINVAL;return 0;+}
+static struct clk_ops msm_clk_ops = {
.set_periph_rate = msm_set_periph_rate,+};
+static const struct udevice_id msm_clk_ids[] = {
{ .compatible = "qcom,gcc-msm8916" },{ .compatible = "qcom,gcc-apq8016" },{ }+};
+U_BOOT_DRIVER(clk_msm) = {
.name = "clk_msm",.id = UCLASS_CLK,.of_match = msm_clk_ids,.ops = &msm_clk_ops,.priv_auto_alloc_size = sizeof(struct msm_clk_priv),.probe = msm_clk_probe,+}; diff --git a/arch/arm/mach-snapdragon/include/mach/gpio.h b/arch/arm/mach-snapdragon/include/mach/gpio.h new file mode 100644 index 0000000..ff949b2 --- /dev/null +++ b/arch/arm/mach-snapdragon/include/mach/gpio.h @@ -0,0 +1,9 @@ +/*
- Empty gpio.h
- This file must stay as arch/arm/include/asm/gpio.h requires it.
- (C) Copyright 2015 Mateusz Kulikowski mateusz.kulikowski@gmail.com
- SPDX-License-Identifier: GPL-2.0+
- */
diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h new file mode 100644 index 0000000..cdbfad0 --- /dev/null +++ b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h @@ -0,0 +1,14 @@ +/*
- Qualcomm APQ8916 sysmap
- (C) Copyright 2015 Mateusz Kulikowski mateusz.kulikowski@gmail.com
- SPDX-License-Identifier: GPL-2.0+
- */
+#ifndef _MACH_SYSMAP_APQ8016_H +#define _MACH_SYSMAP_APQ8016_H
+#define GICD_BASE 0x0b000000 +#define GICC_BASE 0x0a20c000
+#endif diff --git a/arch/arm/mach-snapdragon/reset.c b/arch/arm/mach-snapdragon/reset.c new file mode 100644 index 0000000..2627eec --- /dev/null +++ b/arch/arm/mach-snapdragon/reset.c @@ -0,0 +1,40 @@ +/*
- Qualcomm APQ8016 reset controller driver
- (C) Copyright 2015 Mateusz Kulikowski mateusz.kulikowski@gmail.com
- SPDX-License-Identifier: GPL-2.0+
- */
+#include <common.h> +#include <dm.h> +#include <errno.h> +#include <reset.h> +#include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
+static int msm_reset_request(struct udevice *dev, enum reset_t type) +{
phys_addr_t addr = dev_get_addr(dev);if (!addr)return -EINVAL;writel(0, addr);return -EINPROGRESS;+}
+static struct reset_ops msm_reset_ops = {
.request = msm_reset_request,+};
+static const struct udevice_id msm_reset_ids[] = {
{ .compatible = "qcom,pshold" },{ }+};
+U_BOOT_DRIVER(msm_reset) = {
.name = "msm_reset",.id = UCLASS_RESET,.of_match = msm_reset_ids,.ops = &msm_reset_ops,+};
2.5.0
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot