Drop this unused code.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
board/freescale/common/Makefile | 1 - board/freescale/common/pixis.c | 470 -------------------------------- board/freescale/common/pixis.h | 54 ---- 3 files changed, 525 deletions(-) delete mode 100644 board/freescale/common/pixis.c delete mode 100644 board/freescale/common/pixis.h
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index cc1371867d8..fc51d6d3e18 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -29,7 +29,6 @@ endif obj-$(CONFIG_FSL_CADMUS) += cadmus.o obj-$(CONFIG_FSL_VIA) += cds_via.o obj-$(CONFIG_FMAN_ENET) += fman.o -obj-$(CONFIG_FSL_PIXIS) += pixis.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o endif diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c deleted file mode 100644 index 7096b107e54..00000000000 --- a/board/freescale/common/pixis.c +++ /dev/null @@ -1,470 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2006,2010 Freescale Semiconductor - * Jeff Brown - * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) - */ - -#include <common.h> -#include <command.h> -#include <asm/io.h> - -#define pixis_base (u8 *)PIXIS_BASE - -/* - * Simple board reset. - */ -void pixis_reset(void) -{ - out_8(pixis_base + PIXIS_RST, 0); - - while (1); -} - -/* - * Per table 27, page 58 of MPC8641HPCN spec. - */ -static int set_px_sysclk(unsigned long sysclk) -{ - u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux; - - switch (sysclk) { - case 33: - sysclk_s = 0x04; - sysclk_r = 0x04; - sysclk_v = 0x07; - sysclk_aux = 0x00; - break; - case 40: - sysclk_s = 0x01; - sysclk_r = 0x1F; - sysclk_v = 0x20; - sysclk_aux = 0x01; - break; - case 50: - sysclk_s = 0x01; - sysclk_r = 0x1F; - sysclk_v = 0x2A; - sysclk_aux = 0x02; - break; - case 66: - sysclk_s = 0x01; - sysclk_r = 0x04; - sysclk_v = 0x04; - sysclk_aux = 0x03; - break; - case 83: - sysclk_s = 0x01; - sysclk_r = 0x1F; - sysclk_v = 0x4B; - sysclk_aux = 0x04; - break; - case 100: - sysclk_s = 0x01; - sysclk_r = 0x1F; - sysclk_v = 0x5C; - sysclk_aux = 0x05; - break; - case 134: - sysclk_s = 0x06; - sysclk_r = 0x1F; - sysclk_v = 0x3B; - sysclk_aux = 0x06; - break; - case 166: - sysclk_s = 0x06; - sysclk_r = 0x1F; - sysclk_v = 0x4B; - sysclk_aux = 0x07; - break; - default: - printf("Unsupported SYSCLK frequency.\n"); - return 0; - } - - vclkh = (sysclk_s << 5) | sysclk_r; - vclkl = sysclk_v; - - out_8(pixis_base + PIXIS_VCLKH, vclkh); - out_8(pixis_base + PIXIS_VCLKL, vclkl); - - out_8(pixis_base + PIXIS_AUX, sysclk_aux); - - return 1; -} - -/* Set the CFG_SYSPLL bits - * - * This only has effect if PX_VCFGEN0[SYSPLL]=1, which is true if - * read_from_px_regs() is called. - */ -static int set_px_mpxpll(unsigned long mpxpll) -{ - switch (mpxpll) { - case 2: - case 4: - case 6: - case 8: - case 10: - case 12: - case 14: - case 16: - clrsetbits_8(pixis_base + PIXIS_VSPEED1, 0x1F, mpxpll); - return 1; - } - - printf("Unsupported MPXPLL ratio.\n"); - return 0; -} - -static int set_px_corepll(unsigned long corepll) -{ - u8 val; - - switch (corepll) { - case 20: - val = 0x08; - break; - case 25: - val = 0x0C; - break; - case 30: - val = 0x10; - break; - case 35: - val = 0x1C; - break; - case 40: - val = 0x14; - break; - case 45: - val = 0x0E; - break; - default: - printf("Unsupported COREPLL ratio.\n"); - return 0; - } - - clrsetbits_8(pixis_base + PIXIS_VSPEED0, 0x1F, val); - return 1; -} - -#ifndef CFG_SYS_PIXIS_VCFGEN0_ENABLE -#define CFG_SYS_PIXIS_VCFGEN0_ENABLE 0x1C -#endif - -/* Tell the PIXIS where to find the COREPLL, MPXPLL, SYSCLK values - * - * The PIXIS can be programmed to look at either the on-board dip switches - * or various other PIXIS registers to determine the values for COREPLL, - * MPXPLL, and SYSCLK. - * - * CFG_SYS_PIXIS_VCFGEN0_ENABLE is the value to write to the PIXIS_VCFGEN0 - * register that tells the pixis to use the various PIXIS register. - */ -static void read_from_px_regs(int set) -{ - u8 tmp = in_8(pixis_base + PIXIS_VCFGEN0); - - if (set) - tmp = tmp | CFG_SYS_PIXIS_VCFGEN0_ENABLE; - else - tmp = tmp & ~CFG_SYS_PIXIS_VCFGEN0_ENABLE; - - out_8(pixis_base + PIXIS_VCFGEN0, tmp); -} - -/* CFG_SYS_PIXIS_VBOOT_ENABLE is the value to write to the PX_VCFGEN1 - * register that tells the pixis to use the PX_VBOOT[LBMAP] register. - */ -#ifndef CFG_SYS_PIXIS_VBOOT_ENABLE -#define CFG_SYS_PIXIS_VBOOT_ENABLE 0x04 -#endif - -/* Configure the source of the boot location - * - * The PIXIS can be programmed to look at either the on-board dip switches - * or the PX_VBOOT[LBMAP] register to determine where we should boot. - * - * If we want to boot from the alternate boot bank, we need to tell the PIXIS - * to ignore the on-board dip switches and use the PX_VBOOT[LBMAP] instead. - */ -static void read_from_px_regs_altbank(int set) -{ - u8 tmp = in_8(pixis_base + PIXIS_VCFGEN1); - - if (set) - tmp = tmp | CFG_SYS_PIXIS_VBOOT_ENABLE; - else - tmp = tmp & ~CFG_SYS_PIXIS_VBOOT_ENABLE; - - out_8(pixis_base + PIXIS_VCFGEN1, tmp); -} - -/* CFG_SYS_PIXIS_VBOOT_MASK contains the bits to set in VBOOT register that - * tells the PIXIS what the alternate flash bank is. - * - * Note that it's not really a mask. It contains the actual LBMAP bits that - * must be set to select the alternate bank. This code assumes that the - * primary bank has these bits set to 0, and the alternate bank has these - * bits set to 1. - */ -#ifndef CFG_SYS_PIXIS_VBOOT_MASK -#define CFG_SYS_PIXIS_VBOOT_MASK (0x40) -#endif - -/* Tell the PIXIS to boot from the default flash bank - * - * Program the default flash bank into the VBOOT register. This register is - * used only if PX_VCFGEN1[FLASH]=1. - */ -static void clear_altbank(void) -{ - clrbits_8(pixis_base + PIXIS_VBOOT, CFG_SYS_PIXIS_VBOOT_MASK); -} - -/* Tell the PIXIS to boot from the alternate flash bank - * - * Program the alternate flash bank into the VBOOT register. This register is - * used only if PX_VCFGEN1[FLASH]=1. - */ -static void set_altbank(void) -{ - setbits_8(pixis_base + PIXIS_VBOOT, CFG_SYS_PIXIS_VBOOT_MASK); -} - -/* Reset the board with watchdog disabled. - * - * This respects the altbank setting. - */ -static void set_px_go(void) -{ - /* Disable the VELA sequencer and watchdog */ - clrbits_8(pixis_base + PIXIS_VCTL, 9); - - /* Reboot by starting the VELA sequencer */ - setbits_8(pixis_base + PIXIS_VCTL, 0x1); - - while (1); -} - -/* Reset the board with watchdog enabled. - * - * This respects the altbank setting. - */ -static void set_px_go_with_watchdog(void) -{ - /* Disable the VELA sequencer */ - clrbits_8(pixis_base + PIXIS_VCTL, 1); - - /* Enable the watchdog and reboot by starting the VELA sequencer */ - setbits_8(pixis_base + PIXIS_VCTL, 0x9); - - while (1); -} - -/* Disable the watchdog - * - */ -static int pixis_disable_watchdog_cmd(struct cmd_tbl *cmdtp, int flag, int argc, - char *const argv[]) -{ - /* Disable the VELA sequencer and the watchdog */ - clrbits_8(pixis_base + PIXIS_VCTL, 9); - - return 0; -} - -U_BOOT_CMD( - diswd, 1, 0, pixis_disable_watchdog_cmd, - "Disable watchdog timer", - "" -); - -/* - * This function takes the non-integral cpu:mpx pll ratio - * and converts it to an integer that can be used to assign - * FPGA register values. - * input: strptr i.e. argv[2] - */ -static unsigned long strfractoint(char *strptr) -{ - int i, j; - int mulconst; - int no_dec = 0; - unsigned long intval = 0, decval = 0; - char intarr[3], decarr[3]; - - /* Assign the integer part to intarr[] - * If there is no decimal point i.e. - * if the ratio is an integral value - * simply create the intarr. - */ - i = 0; - while (strptr[i] != '.') { - if (strptr[i] == 0) { - no_dec = 1; - break; - } - intarr[i] = strptr[i]; - i++; - } - - intarr[i] = '\0'; - - if (no_dec) { - /* Currently needed only for single digit corepll ratios */ - mulconst = 10; - decval = 0; - } else { - j = 0; - i++; /* Skipping the decimal point */ - while ((strptr[i] >= '0') && (strptr[i] <= '9')) { - decarr[j] = strptr[i]; - i++; - j++; - } - - decarr[j] = '\0'; - - mulconst = 1; - for (i = 0; i < j; i++) - mulconst *= 10; - decval = dectoul(decarr, NULL); - } - - intval = dectoul(intarr, NULL); - intval = intval * mulconst; - - return intval + decval; -} - -static int pixis_reset_cmd(struct cmd_tbl *cmdtp, int flag, int argc, - char *const argv[]) -{ - unsigned int i; - char *p_cf = NULL; - char *p_cf_sysclk = NULL; - char *p_cf_corepll = NULL; - char *p_cf_mpxpll = NULL; - char *p_altbank = NULL; - char *p_wd = NULL; - int unknown_param = 0; - - /* - * No args is a simple reset request. - */ - if (argc <= 1) { - pixis_reset(); - /* not reached */ - } - - for (i = 1; i < argc; i++) { - if (strcmp(argv[i], "cf") == 0) { - p_cf = argv[i]; - if (i + 3 >= argc) { - break; - } - p_cf_sysclk = argv[i+1]; - p_cf_corepll = argv[i+2]; - p_cf_mpxpll = argv[i+3]; - i += 3; - continue; - } - - if (strcmp(argv[i], "altbank") == 0) { - p_altbank = argv[i]; - continue; - } - - if (strcmp(argv[i], "wd") == 0) { - p_wd = argv[i]; - continue; - } - - unknown_param = 1; - } - - /* - * Check that cf has all required parms - */ - if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll)) - || unknown_param) { -#ifdef CONFIG_SYS_LONGHELP - puts(cmdtp->help); - putc('\n'); -#endif - return 1; - } - - /* - * PIXIS seems to be sensitive to the ordering of - * the registers that are touched. - */ - read_from_px_regs(0); - - if (p_altbank) - read_from_px_regs_altbank(0); - - clear_altbank(); - - /* - * Clock configuration specified. - */ - if (p_cf) { - unsigned long sysclk; - unsigned long corepll; - unsigned long mpxpll; - - sysclk = dectoul(p_cf_sysclk, NULL); - corepll = strfractoint(p_cf_corepll); - mpxpll = dectoul(p_cf_mpxpll, NULL); - - if (!(set_px_sysclk(sysclk) - && set_px_corepll(corepll) - && set_px_mpxpll(mpxpll))) { -#ifdef CONFIG_SYS_LONGHELP - puts(cmdtp->help); - putc('\n'); -#endif - return 1; - } - read_from_px_regs(1); - } - - /* - * Altbank specified - * - * NOTE CHANGE IN BEHAVIOR: previous code would default - * to enabling watchdog if altbank is specified. - * Now the watchdog must be enabled explicitly using 'wd'. - */ - if (p_altbank) { - set_altbank(); - read_from_px_regs_altbank(1); - } - - /* - * Reset with watchdog specified. - */ - if (p_wd) - set_px_go_with_watchdog(); - else - set_px_go(); - - /* - * Shouldn't be reached. - */ - return 0; -} - - -U_BOOT_CMD( - pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd, - "Reset the board using the FPGA sequencer", - " pixis_reset\n" - " pixis_reset [altbank]\n" - " pixis_reset altbank wd\n" - " pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n" - " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>" -); diff --git a/board/freescale/common/pixis.h b/board/freescale/common/pixis.h deleted file mode 100644 index f19e85cb1c9..00000000000 --- a/board/freescale/common/pixis.h +++ /dev/null @@ -1,54 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2010 Freescale Semiconductor, Inc. - */ -#ifndef __PIXIS_H_ -#define __PIXIS_H_ 1 - -/* PIXIS register set. */ -#if defined(CONFIG_TARGET_MPC8536DS) -typedef struct pixis { - u8 id; - u8 ver; - u8 pver; - u8 csr; - u8 rst; - u8 rst2; - u8 aux1; - u8 spd; - u8 aux2; - u8 csr2; - u8 watch; - u8 led; - u8 pwr; - u8 res[3]; - u8 vctl; - u8 vstat; - u8 vcfgen0; - u8 vcfgen1; - u8 vcore0; - u8 res1; - u8 vboot; - u8 vspeed[3]; - u8 sclk[3]; - u8 dclk[3]; - u8 i2cdacr; - u8 vcoreacc[4]; - u8 vcorecnt[3]; - u8 vcoremax[2]; - u8 vplatacc[4]; - u8 vplatcnt[3]; - u8 vplatmax[2]; - u8 vtempacc[4]; - u8 vtempcnt[3]; - u8 vtempmax[2]; - u8 res2[4]; -} __attribute__ ((packed)) pixis_t; -#else -#error Need to define pixis_t for this board -#endif - -/* Pointer to the PIXIS register set */ -#define pixis ((pixis_t *)PIXIS_BASE) - -#endif /* __PIXIS_H_ */