Hi All, In file post/memeory.c the following comment is there /* * This is 64 bit wide test patterns. Note that they reside in ROM * (which presumably works) and the tests write them to RAM which may * not work. * * The "otherpattern" is written to drive the data bus to values other * than the test pattern. This is for detecting floating bus lines. * */ This comment gives an hint that this code is specifically for the 64 bit wide SDRAM only. I ran the same code on the ep8248 board in which the port size of the RAM is 32 bits it worked there, didn't throw any error. I just want to make it sure that, if the port size of the RAM is 32 bits will this test work with out any modifications or do I have to make some changes.
Regards, Vikrant
************************************************************************** This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated. **************************************************************************