The current device model enabled eeprom code only works if CONFIG_SYS_I2C_EEPROM_BUS is set.
This patch makes it work without that define so that the bus number passed to 'eeprom_init' is used.
Signed-off-by: Simon Goldschmidt simon.k.r.goldschmidt@gmail.com Reviewed-by: Heiko Schocher hs@denx.de ---
Changes in v3: - use eeprom_init() to set CONFIG_SYS_I2C_EEPROM_BUS, not i2c_set_bus_num to make things work with CONFIG_DM_I2C
Changes in v2: None
cmd/eeprom.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/cmd/eeprom.c b/cmd/eeprom.c index 6c29b33ba3..7b1f81477f 100644 --- a/cmd/eeprom.c +++ b/cmd/eeprom.c @@ -59,6 +59,10 @@ #endif #endif
+#if defined(CONFIG_DM_I2C) +int eeprom_i2c_bus; +#endif + __weak int eeprom_write_enable(unsigned dev_addr, int state) { return 0; @@ -67,7 +71,9 @@ __weak int eeprom_write_enable(unsigned dev_addr, int state) void eeprom_init(int bus) { /* I2C EEPROM */ -#if defined(CONFIG_SYS_I2C) +#if defined(CONFIG_DM_I2C) + eeprom_i2c_bus = bus; +#elif defined(CONFIG_SYS_I2C) if (bus >= 0) i2c_set_bus_num(bus); i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); @@ -124,14 +130,14 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen, { int ret = 0;
-#if defined(CONFIG_DM_I2C) && defined(CONFIG_SYS_I2C_EEPROM_BUS) +#if defined(CONFIG_DM_I2C) struct udevice *dev;
- ret = i2c_get_chip_for_busnum(CONFIG_SYS_I2C_EEPROM_BUS, addr[0], + ret = i2c_get_chip_for_busnum(eeprom_i2c_bus, addr[0], alen - 1, &dev); if (ret) { printf("%s: Cannot find udev for a bus %d\n", __func__, - CONFIG_SYS_I2C_EEPROM_BUS); + eeprom_i2c_bus); return CMD_RET_FAILURE; }
@@ -141,15 +147,12 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen, ret = dm_i2c_write(dev, offset, buffer, len);
#else /* Non DM I2C support - will be removed */ -#if defined(CONFIG_SYS_I2C_EEPROM_BUS) - i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); -#endif
if (read) ret = i2c_read(addr[0], offset, alen - 1, buffer, len); else ret = i2c_write(addr[0], offset, alen - 1, buffer, len); -#endif /* CONFIG_DM_I2C && CONFIG_SYS_I2C_EEPROM_BUS */ +#endif /* CONFIG_DM_I2C */ if (ret) ret = CMD_RET_FAILURE;
@@ -164,6 +167,10 @@ static int eeprom_rw(unsigned dev_addr, unsigned offset, uchar *buffer, int rcode = 0; uchar addr[3];
+#if defined(CONFIG_SYS_I2C_EEPROM_BUS) + eeprom_init(CONFIG_SYS_I2C_EEPROM_BUS); +#endif + while (offset < end) { alen = eeprom_addr(dev_addr, offset, addr);