23 Jul
2007
23 Jul
'07
6:49 p.m.
Hi Raul,
I am relatively a new U-Boot and Linux user. First of all I have to port U-Boot to my custom board. I am using a MPC866. The board starts as follows:
[...]
The timeout out for the Flash is big enough (500 ms, although I also tried with 1500 ms). I reused an "flash.c" code from a reference board of U-Boot, which includes my same Flash chip (Intel 28F160C3B).
If you are doing a new board port, please don't (mis-)use one of the older custom flash drivers but use the CFI driver when applicable.
Any idea how could I solve it?
As your flash looks CFI conformant, I would suggest you try this.
Cheers Detlev
--
It's like manually inflatable airbags -- people will never
think to use it in time to actually get any help from it.
-- Miles Bader in 20030607122005.GA1086@gnu.org
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu@denx.de