On Wed, Apr 01, 2020 at 12:49:27PM +0530, Amit Singh Tomar wrote:
Synchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b0264d".
Also, it removes older clock binding defined for S900 along with undocumented compatible string "actions,s900-serial" from serial driver and adapts clock driver to cater to new bindings.
Reviewed-by: Andre Przywara andre.przywara@arm.com Signed-off-by: Amit Singh Tomar amittomer25@gmail.com
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
Thanks, Mani
Changes since v8: * No changes. Changes since v7: * No changes. Changes since v6: * Added Reviewed-by tag. Changes since v5: * Moved it 04/11 from 03/11. * removed the undocumented compatible string "actions,s900-serial". * removed the reviewed-by tag. Changes since v4: * This patch is re-ordered, moved from 07/11 to 03/11. * Used the commit-id(12 chars long) in commit message. Changes since v3: * Added Reviewed-by: tag. Changes since v2: * Newly added patch, not there in v2/v1.
arch/arm/dts/s900.dtsi | 322 +++++++++++++++++++++++-- drivers/clk/owl/clk_s900.c | 6 +- drivers/serial/serial_owl.c | 1 - include/dt-bindings/clock/actions,s900-cmu.h | 129 ++++++++++ include/dt-bindings/clock/s900_cmu.h | 77 ------ include/dt-bindings/reset/actions,s900-reset.h | 65 +++++ 6 files changed, 498 insertions(+), 102 deletions(-) create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h delete mode 100644 include/dt-bindings/clock/s900_cmu.h create mode 100644 include/dt-bindings/reset/actions,s900-reset.h
diff --git a/arch/arm/dts/s900.dtsi b/arch/arm/dts/s900.dtsi index 2bbb30a..eb35cf7 100644 --- a/arch/arm/dts/s900.dtsi +++ b/arch/arm/dts/s900.dtsi @@ -1,17 +1,94 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Device Tree Source for Actions Semi S900 SoC -// -// Copyright (C) 2015 Actions Semi Co., Ltd. -// Copyright (C) 2018 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/*
- Copyright (c) 2017 Andreas Färber
- */
-/dts-v1/; -#include <dt-bindings/clock/s900_cmu.h> +#include <dt-bindings/clock/actions,s900-cmu.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/actions,s900-reset.h>
/ { compatible = "actions,s900";
- #address-cells = <0x2>;
- #size-cells = <0x2>;
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <2>;#size-cells = <0>;cpu0: cpu@0 {device_type = "cpu";compatible = "arm,cortex-a53";reg = <0x0 0x0>;enable-method = "psci";};cpu1: cpu@1 {device_type = "cpu";compatible = "arm,cortex-a53";reg = <0x0 0x1>;enable-method = "psci";};cpu2: cpu@2 {device_type = "cpu";compatible = "arm,cortex-a53";reg = <0x0 0x2>;enable-method = "psci";};cpu3: cpu@3 {device_type = "cpu";compatible = "arm,cortex-a53";reg = <0x0 0x3>;enable-method = "psci";};};
reserved-memory {
#address-cells = <2>;#size-cells = <2>;ranges;secmon@1f000000 {reg = <0x0 0x1f000000 0x0 0x1000000>;no-map;};};
psci {
compatible = "arm,psci-0.2";method = "smc";};
arm-pmu {
compatible = "arm,cortex-a53-pmu";interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;};
timer {
compatible = "arm,armv8-timer";interrupts = <GIC_PPI 13(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,<GIC_PPI 14(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,<GIC_PPI 11(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,<GIC_PPI 10(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;};
hosc: hosc {
compatible = "fixed-clock";clock-frequency = <24000000>;#clock-cells = <0>;};
losc: losc { compatible = "fixed-clock";
@@ -26,28 +103,231 @@ };
soc {
u-boot,dm-pre-reloc;#address-cells = <0x2>;#size-cells = <0x2>;
#address-cells = <2>;#size-cells = <2>;ranges;
gic: interrupt-controller@e00f1000 {compatible = "arm,gic-400";reg = <0x0 0xe00f1000 0x0 0x1000>,<0x0 0xe00f2000 0x0 0x2000>,<0x0 0xe00f4000 0x0 0x2000>,<0x0 0xe00f6000 0x0 0x2000>;interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;interrupt-controller;#interrupt-cells = <3>;};uart0: serial@e0120000 {compatible = "actions,s900-uart", "actions,owl-uart";reg = <0x0 0xe0120000 0x0 0x2000>;clocks = <&cmu CLK_UART0>;interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;status = "disabled";};uart1: serial@e0122000 {compatible = "actions,s900-uart", "actions,owl-uart";reg = <0x0 0xe0122000 0x0 0x2000>;clocks = <&cmu CLK_UART1>;interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;status = "disabled";};uart2: serial@e0124000 {compatible = "actions,s900-uart", "actions,owl-uart";reg = <0x0 0xe0124000 0x0 0x2000>;clocks = <&cmu CLK_UART2>;interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;status = "disabled";};uart3: serial@e0126000 {compatible = "actions,s900-uart", "actions,owl-uart";reg = <0x0 0xe0126000 0x0 0x2000>;clocks = <&cmu CLK_UART3>;interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;status = "disabled";};uart4: serial@e0128000 {compatible = "actions,s900-uart", "actions,owl-uart";reg = <0x0 0xe0128000 0x0 0x2000>;clocks = <&cmu CLK_UART4>;interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;status = "disabled";};uart5: serial@e012a000 {
u-boot,dm-pre-reloc;compatible = "actions,s900-serial";reg = <0x0 0xe012a000 0x0 0x1000>;clocks = <&cmu CLOCK_UART5>;
compatible = "actions,s900-uart", "actions,owl-uart";reg = <0x0 0xe012a000 0x0 0x2000>;clocks = <&cmu CLK_UART5>;interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled";};
uart6: serial@e012c000 {compatible = "actions,s900-uart", "actions,owl-uart";reg = <0x0 0xe012c000 0x0 0x2000>;clocks = <&cmu CLK_UART6>;interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;status = "disabled";};sps: power-controller@e012e000 {compatible = "actions,s900-sps";reg = <0x0 0xe012e000 0x0 0x2000>;#power-domain-cells = <1>;};cmu: clock-controller@e0160000 {
u-boot,dm-pre-reloc; compatible = "actions,s900-cmu"; reg = <0x0 0xe0160000 0x0 0x1000>;clocks = <&losc>, <&diff24M>;clock-names = "losc", "diff24M";
clocks = <&hosc>, <&losc>; #clock-cells = <1>;#reset-cells = <1>;};i2c0: i2c@e0170000 {compatible = "actions,s900-i2c";reg = <0 0xe0170000 0 0x1000>;clocks = <&cmu CLK_I2C0>;interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;#address-cells = <1>;#size-cells = <0>;status = "disabled";};i2c1: i2c@e0172000 {compatible = "actions,s900-i2c";reg = <0 0xe0172000 0 0x1000>;clocks = <&cmu CLK_I2C1>;interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;#address-cells = <1>;#size-cells = <0>;status = "disabled";};i2c2: i2c@e0174000 {compatible = "actions,s900-i2c";reg = <0 0xe0174000 0 0x1000>;clocks = <&cmu CLK_I2C2>;interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;#address-cells = <1>;#size-cells = <0>;status = "disabled";};i2c3: i2c@e0176000 {compatible = "actions,s900-i2c";reg = <0 0xe0176000 0 0x1000>;clocks = <&cmu CLK_I2C3>;interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;#address-cells = <1>;#size-cells = <0>;status = "disabled";};i2c4: i2c@e0178000 {compatible = "actions,s900-i2c";reg = <0 0xe0178000 0 0x1000>;clocks = <&cmu CLK_I2C4>;interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;#address-cells = <1>;#size-cells = <0>;status = "disabled";};i2c5: i2c@e017a000 {compatible = "actions,s900-i2c";reg = <0 0xe017a000 0 0x1000>;clocks = <&cmu CLK_I2C5>;interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;#address-cells = <1>;#size-cells = <0>;status = "disabled";};pinctrl: pinctrl@e01b0000 {compatible = "actions,s900-pinctrl";reg = <0x0 0xe01b0000 0x0 0x1000>;clocks = <&cmu CLK_GPIO>;gpio-controller;gpio-ranges = <&pinctrl 0 0 146>;#gpio-cells = <2>;interrupt-controller;#interrupt-cells = <2>;interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;};timer: timer@e0228000 {compatible = "actions,s900-timer";reg = <0x0 0xe0228000 0x0 0x8000>;interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;interrupt-names = "timer1";};dma: dma-controller@e0260000 {compatible = "actions,s900-dma";reg = <0x0 0xe0260000 0x0 0x1000>;interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;#dma-cells = <1>;dma-channels = <12>;dma-requests = <46>;clocks = <&cmu CLK_DMAC>;};mmc0: mmc@e0330000 {compatible = "actions,owl-mmc";reg = <0x0 0xe0330000 0x0 0x4000>;interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;clocks = <&cmu CLK_SD0>;resets = <&cmu RESET_SD0>;dmas = <&dma 2>;dma-names = "mmc";status = "disabled";};mmc1: mmc@e0334000 {compatible = "actions,owl-mmc";reg = <0x0 0xe0334000 0x0 0x4000>;interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;clocks = <&cmu CLK_SD1>;resets = <&cmu RESET_SD1>;dmas = <&dma 3>;dma-names = "mmc";status = "disabled";};mmc2: mmc@e0338000 {compatible = "actions,owl-mmc";reg = <0x0 0xe0338000 0x0 0x4000>;interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;clocks = <&cmu CLK_SD2>;resets = <&cmu RESET_SD2>;dmas = <&dma 4>;dma-names = "mmc";status = "disabled";};mmc3: mmc@e033c000 {compatible = "actions,owl-mmc";reg = <0x0 0xe033c000 0x0 0x4000>;interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;clocks = <&cmu CLK_SD3>;resets = <&cmu RESET_SD3>;dmas = <&dma 46>;dma-names = "mmc";status = "disabled";};
diff --git a/drivers/clk/owl/clk_s900.c b/drivers/clk/owl/clk_s900.c index a7c15d2..d60f199 100644 --- a/drivers/clk/owl/clk_s900.c +++ b/drivers/clk/owl/clk_s900.c @@ -12,7 +12,7 @@ #include <asm/arch-owl/regs_s900.h> #include <asm/io.h>
-#include <dt-bindings/clock/s900_cmu.h> +#include <dt-bindings/clock/actions,s900-cmu.h>
void owl_clk_init(struct owl_clk_priv *priv) { @@ -78,7 +78,7 @@ int owl_clk_enable(struct clk *clk) struct owl_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
- case CLOCK_UART5:
- case CLK_UART5: owl_uart_clk_enable(priv); break; default:
@@ -93,7 +93,7 @@ int owl_clk_disable(struct clk *clk) struct owl_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
- case CLOCK_UART5:
- case CLK_UART5: owl_uart_clk_disable(priv); break; default:
diff --git a/drivers/serial/serial_owl.c b/drivers/serial/serial_owl.c index 539acdc..bb60ca2 100644 --- a/drivers/serial/serial_owl.c +++ b/drivers/serial/serial_owl.c @@ -120,7 +120,6 @@ static const struct dm_serial_ops owl_serial_ops = { };
static const struct udevice_id owl_serial_ids[] = {
- { .compatible = "actions,s900-serial" }, { .compatible = "actions,owl-uart" }, { }
}; diff --git a/include/dt-bindings/clock/actions,s900-cmu.h b/include/dt-bindings/clock/actions,s900-cmu.h new file mode 100644 index 0000000..7c12515 --- /dev/null +++ b/include/dt-bindings/clock/actions,s900-cmu.h @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Device Tree binding constants for Actions Semi S900 Clock Management Unit +// +// Copyright (c) 2014 Actions Semi Inc. +// Copyright (c) 2018 Linaro Ltd.
+#ifndef __DT_BINDINGS_CLOCK_S900_CMU_H +#define __DT_BINDINGS_CLOCK_S900_CMU_H
+#define CLK_NONE 0
+/* fixed rate clocks */ +#define CLK_LOSC 1 +#define CLK_HOSC 2
+/* pll clocks */ +#define CLK_CORE_PLL 3 +#define CLK_DEV_PLL 4 +#define CLK_DDR_PLL 5 +#define CLK_NAND_PLL 6 +#define CLK_DISPLAY_PLL 7 +#define CLK_DSI_PLL 8 +#define CLK_ASSIST_PLL 9 +#define CLK_AUDIO_PLL 10
+/* system clock */ +#define CLK_CPU 15 +#define CLK_DEV 16 +#define CLK_NOC 17 +#define CLK_NOC_MUX 18 +#define CLK_NOC_DIV 19 +#define CLK_AHB 20 +#define CLK_APB 21 +#define CLK_DMAC 22
+/* peripheral device clock */ +#define CLK_GPIO 23
+#define CLK_BISP 24 +#define CLK_CSI0 25 +#define CLK_CSI1 26
+#define CLK_DE0 27 +#define CLK_DE1 28 +#define CLK_DE2 29 +#define CLK_DE3 30 +#define CLK_DSI 32
+#define CLK_GPU 33 +#define CLK_GPU_CORE 34 +#define CLK_GPU_MEM 35 +#define CLK_GPU_SYS 36
+#define CLK_HDE 37 +#define CLK_I2C0 38 +#define CLK_I2C1 39 +#define CLK_I2C2 40 +#define CLK_I2C3 41 +#define CLK_I2C4 42 +#define CLK_I2C5 43 +#define CLK_I2SRX 44 +#define CLK_I2STX 45 +#define CLK_IMX 46 +#define CLK_LCD 47 +#define CLK_NAND0 48 +#define CLK_NAND1 49 +#define CLK_PWM0 50 +#define CLK_PWM1 51 +#define CLK_PWM2 52 +#define CLK_PWM3 53 +#define CLK_PWM4 54 +#define CLK_PWM5 55 +#define CLK_SD0 56 +#define CLK_SD1 57 +#define CLK_SD2 58 +#define CLK_SD3 59 +#define CLK_SENSOR 60 +#define CLK_SPEED_SENSOR 61 +#define CLK_SPI0 62 +#define CLK_SPI1 63 +#define CLK_SPI2 64 +#define CLK_SPI3 65 +#define CLK_THERMAL_SENSOR 66 +#define CLK_UART0 67 +#define CLK_UART1 68 +#define CLK_UART2 69 +#define CLK_UART3 70 +#define CLK_UART4 71 +#define CLK_UART5 72 +#define CLK_UART6 73 +#define CLK_VCE 74 +#define CLK_VDE 75
+#define CLK_USB3_480MPLL0 76 +#define CLK_USB3_480MPHY0 77 +#define CLK_USB3_5GPHY 78 +#define CLK_USB3_CCE 79 +#define CLK_USB3_MAC 80
+#define CLK_TIMER 83
+#define CLK_HDMI_AUDIO 84
+#define CLK_24M 85
+#define CLK_EDP 86
+#define CLK_24M_EDP 87 +#define CLK_EDP_PLL 88 +#define CLK_EDP_LINK 89
+#define CLK_USB2H0_PLLEN 90 +#define CLK_USB2H0_PHY 91 +#define CLK_USB2H0_CCE 92 +#define CLK_USB2H1_PLLEN 93 +#define CLK_USB2H1_PHY 94 +#define CLK_USB2H1_CCE 95
+#define CLK_DDR0 96 +#define CLK_DDR1 97 +#define CLK_DMM 98
+#define CLK_ETH_MAC 99 +#define CLK_RMII_REF 100
+#define CLK_NR_CLKS (CLK_RMII_REF + 1)
+#endif /* __DT_BINDINGS_CLOCK_S900_CMU_H */ diff --git a/include/dt-bindings/clock/s900_cmu.h b/include/dt-bindings/clock/s900_cmu.h deleted file mode 100644 index 2685a6d..0000000 --- a/include/dt-bindings/clock/s900_cmu.h +++ /dev/null @@ -1,77 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/*
- Copyright (C) 2015 Actions Semi Co., Ltd.
- Copyright (C) 2018 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
- */
-#ifndef _DT_BINDINGS_CLOCK_S900_CMU_H_ -#define _DT_BINDINGS_CLOCK_S900_CMU_H_
-/* Module Clock ID */ -#define CLOCK_DDRCH1 0 -#define CLOCK_DMAC 1 -#define CLOCK_DDRCH0 2 -#define CLOCK_BROM 3 -#define CLOCK_NANDC0 4 -#define CLOCK_SD0 5 -#define CLOCK_SD1 6 -#define CLOCK_SD2 7 -#define CLOCK_DE 8 -#define CLOCK_LVDS 9 -#define CLOCK_EDP 10 -#define CLOCK_NANDC1 11 -#define CLOCK_DSI 12 -#define CLOCK_CSI0 13 -#define CLOCK_BISP 14 -#define CLOCK_CSI1 15 -#define CLOCK_SD3 16 -#define CLOCK_I2C4 17 -#define CLOCK_GPIO 18 -#define CLOCK_DMM 19 -#define CLOCK_I2STX 20 -#define CLOCK_I2SRX 21 -#define CLOCK_HDMIA 22 -#define CLOCK_SPDIF 23 -#define CLOCK_PCM0 24 -#define CLOCK_VDE 25 -#define CLOCK_VCE 26 -#define CLOCK_HDE 27 -#define CLOCK_SHARESRAM 28 -#define CLOCK_CMU_DDR1 29 -#define CLOCK_GPU3D 30 -#define CLOCK_CMUDDR0 31 -#define CLOCK_SPEED 32 -#define CLOCK_I2C5 33 -#define CLOCK_THERMAL 34 -#define CLOCK_HDMI 35 -#define CLOCK_PWM4 36 -#define CLOCK_PWM5 37 -#define CLOCK_UART0 38 -#define CLOCK_UART1 39 -#define CLOCK_UART2 40 -#define CLOCK_IRC 41 -#define CLOCK_SPI0 42 -#define CLOCK_SPI1 43 -#define CLOCK_SPI2 44 -#define CLOCK_SPI3 45 -#define CLOCK_I2C0 46 -#define CLOCK_I2C1 47 -#define CLOCK_PCM1 48 -#define CLOCK_IMX 49 -#define CLOCK_UART6 50 -#define CLOCK_UART3 51 -#define CLOCK_UART4 52 -#define CLOCK_UART5 53 -#define CLOCK_ETHERNET 54 -#define CLOCK_PWM0 55 -#define CLOCK_PWM1 56 -#define CLOCK_PWM2 57 -#define CLOCK_PWM3 58 -#define CLOCK_TIMER 59 -#define CLOCK_SE 60 -#define CLOCK_HDCP2TX 61 -#define CLOCK_I2C2 62 -#define CLOCK_I2C3 63
-#endif diff --git a/include/dt-bindings/reset/actions,s900-reset.h b/include/dt-bindings/reset/actions,s900-reset.h new file mode 100644 index 0000000..42c19d0 --- /dev/null +++ b/include/dt-bindings/reset/actions,s900-reset.h @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +// +// Device Tree binding constants for Actions Semi S900 Reset Management Unit +// +// Copyright (c) 2018 Linaro Ltd.
+#ifndef __DT_BINDINGS_ACTIONS_S900_RESET_H +#define __DT_BINDINGS_ACTIONS_S900_RESET_H
+#define RESET_CHIPID 0 +#define RESET_CPU_SCNT 1 +#define RESET_SRAMI 2 +#define RESET_DDR_CTL_PHY 3 +#define RESET_DMAC 4 +#define RESET_GPIO 5 +#define RESET_BISP_AXI 6 +#define RESET_CSI0 7 +#define RESET_CSI1 8 +#define RESET_DE 9 +#define RESET_DSI 10 +#define RESET_GPU3D_PA 11 +#define RESET_GPU3D_PB 12 +#define RESET_HDE 13 +#define RESET_I2C0 14 +#define RESET_I2C1 15 +#define RESET_I2C2 16 +#define RESET_I2C3 17 +#define RESET_I2C4 18 +#define RESET_I2C5 19 +#define RESET_IMX 20 +#define RESET_NANDC0 21 +#define RESET_NANDC1 22 +#define RESET_SD0 23 +#define RESET_SD1 24 +#define RESET_SD2 25 +#define RESET_SD3 26 +#define RESET_SPI0 27 +#define RESET_SPI1 28 +#define RESET_SPI2 29 +#define RESET_SPI3 30 +#define RESET_UART0 31 +#define RESET_UART1 32 +#define RESET_UART2 33 +#define RESET_UART3 34 +#define RESET_UART4 35 +#define RESET_UART5 36 +#define RESET_UART6 37 +#define RESET_HDMI 38 +#define RESET_LVDS 39 +#define RESET_EDP 40 +#define RESET_USB2HUB 41 +#define RESET_USB2HSIC 42 +#define RESET_USB3 43 +#define RESET_PCM1 44 +#define RESET_AUDIO 45 +#define RESET_PCM0 46 +#define RESET_SE 47 +#define RESET_GIC 48 +#define RESET_DDR_CTL_PHY_AXI 49 +#define RESET_CMU_DDR 50 +#define RESET_DMM 51 +#define RESET_HDCP2TX 52 +#define RESET_ETHERNET 53
+#endif /* __DT_BINDINGS_ACTIONS_S900_RESET_H */
2.7.4