With PowerPC 4xx support removed, we have removed xilinx-ppc support as well, remove this file now.
Fixes 98f705c9cefd ("powerpc: remove 4xx support") Signed-off-by: Tom Rini trini@konsulko.com --- include/configs/xilinx-ppc.h | 88 -------------------------------------------- 1 file changed, 88 deletions(-) delete mode 100644 include/configs/xilinx-ppc.h
diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h deleted file mode 100644 index e8a0c1c33d7e..000000000000 --- a/include/configs/xilinx-ppc.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com - * This work has been supported by: QTechnology http://qtec.com/ - * - * (C) Copyright 2008 - * Georg Schardt schardt@team-ctech.de - * - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_XLX_H -#define __CONFIG_XLX_H - -/* -#define DEBUG -#define ET_DEBUG -*/ - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_BASE 0x0 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/*Cmd*/ -#define CONFIG_CMD_REGINFO -#undef CONFIG_CMD_MTDPARTS - -/*Misc*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 - /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0x00400000 - /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00C00000 - /* 4 ... 12 MB in DRAM */ -#define CONFIG_SYS_LOAD_ADDR 0x00400000 - /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 - /* Extended board_into (bd_t) */ - /* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING /* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - /* Initial Memory map for Linux */ - -/*Stack*/ -#define CONFIG_SYS_INIT_RAM_ADDR 0x800000/* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -/*Speed*/ -#define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ - -/*Flash*/ -#ifdef XPAR_FLASH_MEM0_BASEADDR -#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#else -#define CONFIG_ENV_IS_NOWHERE -#endif - -/* The following table includes the supported baudrates */ -# define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} - -#endif /* __CONFIG_H */