Default configuration matches values which are set in the board so this configuration is not required.
Signed-off-by: Svyatoslav Ryhel clamor95@gmail.com --- board/asus/transformer-t30/transformer-t30.c | 25 -------------------- 1 file changed, 25 deletions(-)
diff --git a/board/asus/transformer-t30/transformer-t30.c b/board/asus/transformer-t30/transformer-t30.c index b6fd19d28e..5c1bac004f 100644 --- a/board/asus/transformer-t30/transformer-t30.c +++ b/board/asus/transformer-t30/transformer-t30.c @@ -33,11 +33,6 @@ #define TPS65911_LDO5 0x32 #define TPS65911_LDO6 0x35
-#define TPS65911_GPIO0 0x60 -#define TPS65911_GPIO6 0x66 -#define TPS65911_GPIO7 0x67 -#define TPS65911_GPIO8 0x68 - #define TPS65911_DEVCTRL 0x3F #define DEVCTRL_PWR_OFF_MASK BIT(7) #define DEVCTRL_DEV_ON_MASK BIT(2) @@ -146,26 +141,6 @@ static void tps65911_voltage_init(void) if (ret) log_debug("vddio_usd set failed: %d\n", ret); } - - /* TPS659110: GPIO0_REG output high to VDD_5V0_SBY */ - ret = dm_i2c_reg_write(dev, TPS65911_GPIO0, 0x07); - if (ret) - log_debug("vdd_5v0_sby set failed: %d\n", ret); - - /* TPS659110: GPIO6_REG output high to VDD_3V3_SYS */ - ret = dm_i2c_reg_write(dev, TPS65911_GPIO6, 0x07); - if (ret) - log_debug("vdd_3v3_sys set failed: %d\n", ret); - - /* TPS659110: GPIO7_REG output high to VDD_1V5_DDR */ - ret = dm_i2c_reg_write(dev, TPS65911_GPIO7, 0x07); - if (ret) - log_debug("vdd_1v5_ddr set failed: %d\n", ret); - - /* TPS659110: GPIO8_REG pull_down output high to VDD_5V0_SYS */ - ret = dm_i2c_reg_write(dev, TPS65911_GPIO8, 0x0f); - if (ret) - log_debug("vdd_5v0_sys set failed: %d\n", ret); }
/*