Hi Neil,
On Wed, 1 Jul 2020 at 20:16, Neil Armstrong narmstrong@baylibre.com wrote:
On 01/07/2020 16:43, Anand Moon wrote:
Hi Neil,
On Wed, 1 Jul 2020 at 18:38, Neil Armstrong narmstrong@baylibre.com wrote:
Hi,
On 01/07/2020 13:31, Anand Moon wrote:
Hi Neil,
On Wed, 1 Jul 2020 at 13:22, Neil Armstrong narmstrong@baylibre.com wrote:
Hi,
On 30/06/2020 18:02, Anand Moon wrote:
Hi Neil,
On Tue, 30 Jun 2020 at 18:30, Neil Armstrong narmstrong@baylibre.com wrote: > > Hi, > > On 30/06/2020 13:33, Anand Moon wrote: >> Hi Beniamino, >> >> On Wed, 6 May 2020 at 01:53, Beniamino Galvani b.galvani@gmail.com wrote: >>> >>> Hi, >>> >>> these two patches add initial u-boot support for Hardkernel ODROID-C4. >>> >>> https://wiki.odroid.com/odroid-c4/odroid-c4 >>> >>> Beniamino Galvani (2): >>> arm: dts: import ODROID-C4 device tree >>> boards: amlogic: add ODROID-C4 support >>> >> >> Can you respin this patches, I would like to see these get merged in >> the current u-boot release >> >> -Anand >> > > The Odroid-C4 could re-use the new Odroid-N2 board support I submitted at [1] > > Anand, is the MAC address stored stored the same way on the C4 ? > > Neil > > [1] https://patchwork.ozlabs.org/project/uboot/patch/20200618144037.23392-1-narm...
I gave this patches a try on latest u-boot but I cannot make my Odroid C4 to boot up uinsg microSD card and eMMC Here are the logs.
The PHY config must be wrong and it misses the -u-boot.dtsi to enable HDMI.
Can you test my custodian test branch with my C4 support patchset ?
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/-/tree/u-boot-amlogi...
This one is used in Armbian 5.4 release and our KernelCI lab.
Neil
Thanks.
There seems to be a typo in the build instructions in # doc/board/amlogic/odroid-c4.rst instead of *g12b*, it should be *g12a*
See below I get following build warning, which I fix locally,
./buildc4c.sh: line 78: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory ./buildc4c.sh: line 81: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory ./buildc4c.sh: line 84: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory ./buildc4c.sh: line 87: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory ./buildc4c.sh: line 90: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory ./buildc4c.sh: line 92: /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a: No such file or directory
After that fix I am able to boot my board using eMMC and microSD card.
Thanks for testing, I'll push my serie rebased on v5.8-rc1 and fix this typo.
Neil
Thanks, I see the same issue with random mac address just like N2.
Yes, my branch was not using the N2 board support with eFuses MAC readout, can you test my last patchset I just sent ? It should use the MAC from eFuses or generate an unique address with the SoC serial number.
Thanks
Please apply the patch in [1] before the new Odroid-C4 serie.
[1] https://patchwork.ozlabs.org/project/uboot/patch/20200618144037.23392-1-narm...
Neil
I do not know the reason but your patches are not showing up on u-boot patchwork.
[0] https://patchwork.ozlabs.org/project/uboot/list/
-Anand