Enable the NET MULTI option and remove build warning
Tested: SDP3430
Signed-off-by: Nishanth Menon nm@ti.com Cc: Ben Warren biggerbadderben@gmail.com Cc: Sandeep Paulraj s-paulraj@ti.com --- board/ti/sdp3430/sdp.c | 12 +++++++----- include/configs/omap3_sdp3430.h | 3 ++- 2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c index 40cf26f..0d8e20d 100644 --- a/board/ti/sdp3430/sdp.c +++ b/board/ti/sdp3430/sdp.c @@ -22,6 +22,7 @@ * MA 02111-1307 USA */ #include <common.h> +#include <netdev.h> #include <twl4030.h> #include <asm/io.h> #include <asm/arch/mux.h> @@ -125,12 +126,13 @@ int board_init(void) #define ETH_CONTROL_REG (CONFIG_LAN91C96_BASE + 0x30b)
/** - * @brief ether_init Take the Ethernet controller out of reset and wait + * @brief board_eth_init Take the Ethernet controller out of reset and wait * for the EEPROM load to complete. */ -static void ether_init(void) +int board_eth_init(bd_t *bis) { -#ifdef CONFIG_DRIVER_LAN91C96 + int rc = 0; +#ifdef CONFIG_LAN91C96 int cnt = 20;
writew(0x0, LAN_RESET_REGISTER); @@ -155,10 +157,11 @@ static void ether_init(void)
writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG); udelay(1000); + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); reset_err_out: - return;
#endif + return rc; }
/** @@ -187,7 +190,6 @@ int misc_init_r(void) * VSIM - off (init, variable) for MMC1.DAT[3..7], SIM * VPLL2 - 1.8V */ - ether_init();
return 0; } diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 229dc5e..7401671 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -200,7 +200,8 @@ */ #if defined(CONFIG_CMD_NET)
-#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_NET_MULTI +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE DEBUG_BASE #define CONFIG_LAN91C96_EXT_PHY