[U-Boot] [PATCH] ARM: rmobile: dts: Add SDR104/HS200 to Salvator-X

6 Oct 2017

Add DT nodes to enable SDR104/HS200 modes on Salvator-X boards.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com
Cc: Nobuhiro Iwamatsu iwamatsu@nigauri.org
---
 arch/arm/dts/salvator-common.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi
index 0a0963a0a9..fb05da5e83 100644
--- a/arch/arm/dts/salvator-common.dtsi
+++ b/arch/arm/dts/salvator-common.dtsi
@@ -575,7 +575,10 @@
    wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
    bus-width = <4>;
    sd-uhs-sdr50;
+	sd-uhs-sdr104;
    status = "okay";
+
+	max-frequency = <208000000>;
 };
&sdhi2 {
@@ -587,9 +590,12 @@
    vmmc-supply = <&reg_3p3v>;
    vqmmc-supply = <&reg_1p8v>;
    bus-width = <8>;
+	mmc-ddr-1_8v;
    mmc-hs200-1_8v;
    non-removable;
    status = "okay";
+
+	max-frequency = <200000000>;
 };
&sdhi3 {
@@ -603,7 +609,10 @@
    wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
    bus-width = <4>;
    sd-uhs-sdr50;
+	sd-uhs-sdr104;
    status = "okay";
+
+	max-frequency = <208000000>;
 };
&ssi1 {
-- 
2.11.0


    