u-boot-users-bounces@lists.sourceforge.net wrote on :
In message 20080404130906.24594.85188.stgit@tq-sewsrv-4.tq-net.de you wrote:
According to the ata (ata5) specification the RESET- signal shall be asserted for at least 25 us. Without this patch, the RESET- signal is asserted on some boards for only < 1 us (e. g. on the TQM5200). This patch adds a general delay of 25 us to the RESET- signal.
Already applied.
If you want to send follow-ups to previous postings. please make sure to keep the reference information intact. As is, it was impossible to
I'm sorry for that! I tried to mark this patch as follup-up by the "v2" in the Subject, but I see, that this was not sufficient.
What do you mean with reference information? The message id? Does anyone know, how I can re-send a modified patch with git (or stacked git which I use normally) without generating a new message ID (and without copy- and pasteing the new patch in the reply email)?
Best Regards, Martin Krause
-- TQ-Systems GmbH Muehlstrasse 2, Gut Delling, D-82229 Seefeld Amtsgericht Muenchen, HRB 105 018, UST-IdNr. DE 811 607 913 Geschaeftsfuehrer: Dipl.-Ing. (FH) Detlef Schneider, Dipl.-Ing. (FH) Ruediger Stahl http://www.tq-group.com