From: Patrick Bruenn p.bruenn@beckhoff.com
Add support for the device tree property "default-state". This feature might be useful for LEDs indicating "power on" or similar states.
Note: Even with this commit gpio-leds remain in reset state. That's because the led_gpio is not probed until DM_FLAG_ACTIVATED is set.
Signed-off-by: Patrick Bruenn p.bruenn@beckhoff.com
---
drivers/led/led_gpio.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/led/led_gpio.c b/drivers/led/led_gpio.c index 9976635887..e68d8d3864 100644 --- a/drivers/led/led_gpio.c +++ b/drivers/led/led_gpio.c @@ -60,11 +60,25 @@ static int led_gpio_probe(struct udevice *dev) { struct led_uc_plat *uc_plat = dev_get_uclass_platdata(dev); struct led_gpio_priv *priv = dev_get_priv(dev); + const char *default_state; + int ret;
/* Ignore the top-level LED node */ if (!uc_plat->label) return 0; - return gpio_request_by_name(dev, "gpios", 0, &priv->gpio, GPIOD_IS_OUT); + + ret = gpio_request_by_name(dev, "gpios", 0, &priv->gpio, GPIOD_IS_OUT); + if (ret) + return ret; + + default_state = dev_read_string(dev, "default-state"); + if (default_state) { + if (!strncmp(default_state, "on", 2)) + gpio_led_set_state(dev, LEDST_ON); + else if (!strncmp(default_state, "off", 3)) + gpio_led_set_state(dev, LEDST_OFF); + } + return 0; }
static int led_gpio_remove(struct udevice *dev)