SZ definitions are deprecated as indicated by wd here: http://www.nabble.com/forum/Permalink.jtp?root=25518020&post=25584065&am...
Fix by running the following script I=`cat include/asm-arm/sizes.h |grep SZ_|cut -d ' ' -f2` I=`cat include/asm-arm/sizes.h |grep SZ_|cut -d ' ' -f4-` sz_array=( $I ) val_array=( $J ) for file in include/configs/omap3_*; do x=0 for i in $I do o=${sz_array[$x]} n=${val_array[$x]} cat $file |sed -e "s/$o/$n/g">b mv b $file x=$(( x + 1 )) done done
Signed-off-by: Nishanth Menon nm@ti.com Cc: Vikram Pandita vikram.pandita@ti.com Cc: Sandeep Paulraj s-paulraj@ti.com Cc: Tom Rix tom.rix@windriver.com Cc: Dirk Behme dirk.behme@googlemail.com --- include/configs/omap3_beagle.h | 16 ++++++++-------- include/configs/omap3_evm.h | 16 ++++++++-------- include/configs/omap3_overo.h | 16 ++++++++-------- include/configs/omap3_pandora.h | 16 ++++++++-------- include/configs/omap3_zoom1.h | 16 ++++++++-------- include/configs/omap3_zoom2.h | 16 ++++++++-------- 6 files changed, 48 insertions(+), 48 deletions(-)
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 55eeb94..14754c3 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -61,10 +61,10 @@
/* * Size of malloc() pool + * Total env = 128K, malloc = 128K */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_ENV_SIZE 0x00020000 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x00020000) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */
@@ -239,10 +239,10 @@ * * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#define CONFIG_STACKSIZE 0x00020000 /* regular stack */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#define CONFIG_STACKSIZE_IRQ 0x00001000 /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ 0x00001000 /* FIQ stack */ #endif
/*----------------------------------------------------------------------- @@ -250,7 +250,7 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/* SDRAM Bank Allocation method */ @@ -269,7 +269,7 @@ #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ /* one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 72e9626..f615a4e 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -66,10 +66,10 @@
/* * Size of malloc() pool + * Total Environment = 128K + malloc = 128K */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_ENV_SIZE 0x00020000 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x00020000) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* @@ -231,10 +231,10 @@ * * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#define CONFIG_STACKSIZE 0x00020000 /* regular stack */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#define CONFIG_STACKSIZE_IRQ 0x00001000 /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ 0x00001000 /* FIQ stack */ #endif
/*----------------------------------------------------------------------- @@ -242,7 +242,7 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/* SDRAM Bank Allocation method */ @@ -261,7 +261,7 @@ #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ /* on one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 1a91921..3ba9b69 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -53,10 +53,10 @@
/* * Size of malloc() pool + * Total Environment = 128K + malloc = 128K */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_ENV_SIZE 0x00020000 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x00020000) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */
@@ -224,10 +224,10 @@ * * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#define CONFIG_STACKSIZE 0x00020000 /* regular stack */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#define CONFIG_STACKSIZE_IRQ 0x00001000 /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ 0x00001000 /* FIQ stack */ #endif
/*----------------------------------------------------------------------- @@ -235,7 +235,7 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/* SDRAM Bank Allocation method */ @@ -254,7 +254,7 @@ #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ /* one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 064c0bc..517df23 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -56,10 +56,10 @@
/* * Size of malloc() pool + * Total Environment = 128K + malloc = 128K */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_ENV_SIZE 0x00020000 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x00020000) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */
@@ -228,10 +228,10 @@ * * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#define CONFIG_STACKSIZE 0x00020000 /* regular stack */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#define CONFIG_STACKSIZE_IRQ 0x00001000 /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ 0x00001000 /* FIQ stack */ #endif
/*----------------------------------------------------------------------- @@ -239,7 +239,7 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/* SDRAM Bank Allocation method */ @@ -258,7 +258,7 @@ #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ /* one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index b55b8f0..f428039 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -62,10 +62,10 @@
/* * Size of malloc() pool + * Total Environment = 128K + malloc = 128K */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_ENV_SIZE 0x00020000 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x00020000) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */
@@ -236,10 +236,10 @@ * * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#define CONFIG_STACKSIZE 0x00020000 /* regular stack */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#define CONFIG_STACKSIZE_IRQ 0x00001000 /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ 0x00001000 /* FIQ stack */ #endif
/*----------------------------------------------------------------------- @@ -247,7 +247,7 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/* SDRAM Bank Allocation method */ @@ -266,7 +266,7 @@ #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ /* one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 75ab980..d1989f7 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -63,10 +63,10 @@
/* * Size of malloc() pool + * Total Environment = 128K + malloc = 128K */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_ENV_SIZE 0x00020000 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x00020000) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* @@ -201,10 +201,10 @@ * * The stack sizes are set up in start.S using these settings */ -#define CONFIG_STACKSIZE SZ_128K +#define CONFIG_STACKSIZE 0x00020000 #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K -#define CONFIG_STACKSIZE_FIQ SZ_4K +#define CONFIG_STACKSIZE_IRQ 0x00001000 +#define CONFIG_STACKSIZE_FIQ 0x00001000 #endif
/*----------------------------------------------------------------------- @@ -212,7 +212,7 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/* SDRAM Bank Allocation method */ @@ -231,7 +231,7 @@ #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ /* one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base