2 Jul
2008
2 Jul
'08
6:15 p.m.
Shinose wrote:
On Tue, Jul 1, 2008 at 7:42 PM, Ben Warren <biggerbadderben@gmail.com mailto:biggerbadderben@gmail.com> wrote:
Hi Naveen, On Tue, Jul 1, 2008 at 7:02 AM, navin karnam <navin.karnam@gmail.com <mailto:navin.karnam@gmail.com>> wrote: > > Hi, > > I have pxa255 board and one Ethernet controller LAN91C111-Nu (10/100 Base T) > attached to it. > Does u-boot code supports this type of Ethernet controller? Can anybody tell > what are the changes that need to be done to make this Ethernet controller > work? If not how do i had the support for it? > I believe the LNA91C111 is software compatible with the LAN91xx, but don't know for sure. If this is true, you should be able to use the driver called 'smc9111.c'. Be sure to get the latest version of the code base from git.denx.de <http://git.denx.de>. regards, Ben ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net <mailto:U-Boot-Users@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/u-boot-usersHi Naveen,
The driver support the SMSC chip 9111 on any platform if you have a 32 bit wide databus. For other bus widths you need to customize the driver.
The driver supports both 32-bit and 16-bit, and probably 8-bit too, although nobody's tried it and reported results.
Thanks & Regards, Shinose.
regards, Ben