Hi Radha,
Please don't top post.
Radha Krishna wrote:
Hi GVB, You are right. Could you tell me the solution.
Don't use DOS (aka Windows).
Since you already have a problem there, you can use "dos2unix" or equivalent. If you feel you must use Windows, many Windows editors (e.g. UltraEdit) allow you to control/convert line endings.
Best Regards, Kris.
[snip]
$ make CROSS_COMPILE=arm-none-linux-gnueabi-
omap3430sdp_config
./mkconfig: line 2: $'\r': command not
found
make: *** [omap3430sdp_config] Error 127
Is that telling you that you have DOS line endings (<CR>+<LF> i.e. \r\n) as opposed to unix line endings (\n only)?
$ make CROSS_COMPILE=arm-none-linux-gnueabi- System not configured - see README make: *** [all] Error 1
Could somebody tell me steps to compile U-Boot for TI3430.
Best Regards, Krishna.
My best guess, gvb
HTH, gvb