Re: [U-Boot] [PATCH v2 2/3] dfu: ram support

Hi Afzal,

DFU spec mentions it as a method to upgrade firmware (software stored in writable non-volatile memory). It also says other potential uses of DFU is beyond scope of the spec.

Here such a beyond the scope use is being attempted - directly pumping binary images from host via USB to RAM. This facility is a developer centric one in that it gives advantage over upgrading non-volatile memory for testing new images every time during development and/or testing.

Directly putting image onto RAM would speed up upgrade process. This and convenience was the initial thoughts that led to doing this, speed improvement over MMC was only 1 second though - 6 sec on RAM as opposed to 7 sec on MMC in beagle bone,

Which version of dfu-util do you use? I had slow transmission problem with "ancient" dfu-util version 0.1.

perhaps enabling cache and/or optimizing DFU framework to avoid multiple copy for ram (if worth) may help, and on other platforms and other boot media like NAND maybe improvement would be higher.

And for a platform that doesn't yet have proper DFU suppport for non-volatile media's, DFU to RAM can be used.

Another minor advantage would be to increase life of mmc/nand as it would be less used during development/testing.

usage: <image name> ram <start address> <size> eg. kernel ram 0x81000000 0x1000000

Downloading images to RAM using DFU is not something new, this is acheived in openmoko also.

DFU on RAM can be used for extracting RAM contents to host using dfu upload. Perhaps this can be extended to io for squeezing out register dump through usb, if it is worth.

Signed-off-by: Afzal Mohammed afzal.mohd.ma@gmail.com Cc: Lukasz Majewski l.majewski@samsung.com Cc: Pantelis Antoniou panto@antoniou-consulting.com

---

v2: remove read/write enumerator define's, instead use new common ones

drivers/dfu/Makefile | 1 + drivers/dfu/dfu.c | 7 +++-- drivers/dfu/dfu_ram.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/dfu.h | 18 ++++++++++++ 4 files changed, 101 insertions(+), 2 deletions(-) create mode 100644 drivers/dfu/dfu_ram.c

diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile index fca370a..de9e44e 100644 --- a/drivers/dfu/Makefile +++ b/drivers/dfu/Makefile @@ -12,6 +12,7 @@ LIB = $(obj)libdfu.o COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o +COBJS-$(CONFIG_DFU_RAM) += dfu_ram.o

SRCS := $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index d73d510..7b3d05d 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -325,6 +325,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt, } else if (strcmp(interface, "nand") == 0) { if (dfu_fill_entity_nand(dfu, s)) return -1;

• } else if (strcmp(interface, "ram") == 0) {

• if (dfu_fill_entity_ram(dfu, s))
  

• 	return -1;
  

  } else { printf("%s: Device %s not (yet) supported!\n", __func__, interface);

@@ -374,14 +377,14 @@ int dfu_config_entities(char *env, char *interface, int num) const char *dfu_get_dev_type(enum dfu_device_type t) {

• const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND" };

• const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND",

"RAM" }; return dev_t[t]; }

const char *dfu_get_layout(enum dfu_layout l) { const char *dfu_layout[] = {NULL, "RAW_ADDR", "FAT", "EXT2",

• 			   "EXT3", "EXT4" };
  

• 			   "EXT3", "EXT4",
  

"RAM_ADDR" }; return dfu_layout[l]; }

diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c new file mode 100644 index 0000000..a603bfb --- /dev/null +++ b/drivers/dfu/dfu_ram.c @@ -0,0 +1,77 @@ +/*

• • (C) Copyright 2013
• • Afzal Mohammed afzal.mohd.ma@gmail.com
• • Reference: dfu_mmc.c
• • Copyright (C) 2012 Samsung Electronics
• • author: Lukasz Majewski l.majewski@samsung.com
• • SPDX-License-Identifier: GPL-2.0+
• */

+#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <dfu.h>

+static int dfu_transfer_medium_ram(enum dfu_op op, struct dfu_entity *dfu,

• 		   u64 offset, void *buf, long *len)
  

+{

• if (dfu->layout != DFU_RAM_ADDR) {

• printf("%s: unsupported layout :%s\n", __func__,
  

•        dfu_get_layout(dfu->layout));
  

Please use error() from ./include/common.h Frankly, I've overlooked this when I originally developed the code.

• return  -EINVAL;
  

• }
• if (offset > dfu->data.ram.size) {

• printf("%s: request exceeds allowed area\n",
  

__func__);

The same here.

• return -EINVAL;
  

• }
• if (op == DFU_OP_WRITE)

• memcpy(dfu->data.ram.start + offset, buf, *len);
  

• else

• memcpy(buf, dfu->data.ram.start + offset, *len);
  

• return 0;

+}

+static int dfu_write_medium_ram(struct dfu_entity *dfu, u64 offset,

• 		void *buf, long *len)
  

+{

• return dfu_transfer_medium_ram(DFU_OP_WRITE, dfu, offset,

buf, len); +}

+static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset,

• 	       void *buf, long *len)
  

+{

• if (!*len) {

• *len = dfu->data.ram.size;
  

• return 0;
  

• }
• return dfu_transfer_medium_ram(DFU_OP_READ, dfu, offset,

buf, len); +}

+int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +{

• char *st;
• dfu->dev_type = DFU_DEV_RAM;
• st = strsep(&s, " ");
• if (strcmp(st, "ram")) {

• printf("%s: unsupported device: %s\n", __func__, st);
  

And here

• return -ENODEV;
  

• }
• dfu->layout = DFU_RAM_ADDR;
• dfu->data.ram.start = (void *)simple_strtoul(s, &s, 16);
• dfu->data.ram.size = simple_strtoul(++s, &s, 16);
• dfu->write_medium = dfu_write_medium_ram;
• dfu->read_medium = dfu_read_medium_ram;
• dfu->inited = 0;
• return 0;

+} diff --git a/include/dfu.h b/include/dfu.h index 6115d90..693ecb8 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -19,6 +19,7 @@ enum dfu_device_type { DFU_DEV_MMC = 1, DFU_DEV_ONENAND, DFU_DEV_NAND,

• DFU_DEV_RAM,

};

enum dfu_layout { @@ -27,6 +28,7 @@ enum dfu_layout { DFU_FS_EXT2, DFU_FS_EXT3, DFU_FS_EXT4,

• DFU_RAM_ADDR,

};

enum dfu_op { @@ -56,6 +58,11 @@ struct nand_internal_data { unsigned int ubi; };

+struct ram_internal_data {

• void *start;
• unsigned int size;

+};

static inline unsigned int get_mmc_blk_size(int dev) { return find_mmc_device(dev)->read_bl_len; @@ -81,6 +88,7 @@ struct dfu_entity { union { struct mmc_internal_data mmc; struct nand_internal_data nand;

• struct ram_internal_data ram;
  

  } data;

  int (*read_medium)(struct dfu_entity *dfu,

@@ -142,4 +150,14 @@ static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) } #endif

+#ifdef CONFIG_DFU_RAM +extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s); +#else +static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +{

• puts("RAM support not available!\n");
• return -1;

+} +#endif

#endif /* __DFU_ENTITY_H_ */

Only please change the printf() -> error().