From: Tien Fong Chee tien.fong.chee@intel.com
The drivers is restructured such common functions, gen5 functions, and arria10 functions are moved to misc.c, misc_gen5 and misc_arria10 respectively.
Signed-off-by: Tien Fong Chee tien.fong.chee@intel.com Cc: Marek Vasut marex@denx.de Cc: Dinh Nguyen dinguyen@kernel.org Cc: Chin Liang See chin.liang.see@intel.com Cc: Tien Fong skywindctf@gmail.com --- arch/arm/mach-socfpga/Makefile | 4 +- arch/arm/mach-socfpga/include/mach/misc.h | 25 ++ arch/arm/mach-socfpga/misc.c | 429 +--------------------------- arch/arm/mach-socfpga/misc_arria10.c | 111 ++++++++ arch/arm/mach-socfpga/misc_gen5.c | 363 ++++++++++++++++++++++++ 5 files changed, 517 insertions(+), 415 deletions(-) create mode 100644 arch/arm/mach-socfpga/include/mach/misc.h create mode 100644 arch/arm/mach-socfpga/misc_arria10.c create mode 100644 arch/arm/mach-socfpga/misc_gen5.c
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index b8fcf6e..f8b529e 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -9,9 +9,9 @@
obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o \ fpga_manager.o board.o -obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += reset_manager_arria10.o +obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += reset_manager_arria10.o misc_arria10.o obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o \ - reset_manager_gen5.o + reset_manager_gen5.o misc_gen5.o
ifdef CONFIG_SPL_BUILD obj-y += spl.o diff --git a/arch/arm/mach-socfpga/include/mach/misc.h b/arch/arm/mach-socfpga/include/mach/misc.h new file mode 100644 index 0000000..1bf1783 --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/misc.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2016, Intel Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _MISC_H_ +#define _MISC_H_ + +extern void dwmac_deassert_reset(const unsigned int of_reset_id, + const u32 phymode); + +struct bsel{ + const char *mode; + const char *name; +}; + +extern struct bsel bsel_str[]; + +#ifdef CONFIG_FPGA +extern void socfpga_fpga_add(void); +#else +inline void socfpga_fpga_add(void) {} +#endif +#endif /* _MISC_H_ */ diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c index 00e385f..f44233d 100644 --- a/arch/arm/mach-socfpga/misc.c +++ b/arch/arm/mach-socfpga/misc.c @@ -1,51 +1,39 @@ /* - * Copyright (C) 2012 Altera Corporation <www.altera.com> + * Copyright (C) 2012-2016 Altera Corporation <www.altera.com> * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0 */
#include <common.h> #include <asm/io.h> #include <errno.h> -#include <fdtdec.h> -#include <libfdt.h> #include <altera.h> #include <miiphy.h> #include <netdev.h> #include <watchdog.h> +#include <asm/arch/misc.h> #include <asm/arch/reset_manager.h> -#include <asm/arch/scan_manager.h> #include <asm/arch/sdram_a10.h> #include <asm/arch/system_manager.h> #include <asm/arch/nic301.h> #include <asm/arch/scu.h> #include <asm/pl310.h>
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5) -#include <dt-bindings/reset/altr,rst-mgr.h> -#else -#include <dt-bindings/reset/altr,rst-mgr-a10.h> -#endif - DECLARE_GLOBAL_DATA_PTR;
-static struct pl310_regs *const pl310 = +static const struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE; -static struct socfpga_system_manager *sysmgr_regs = - (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; -static struct socfpga_reset_manager *reset_manager_base = - (struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS; -#if defined(CONFIG_TARGET_SOCFPGA_GEN5) -static struct nic301_registers *nic301_regs = - (struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS; -#else -static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base = - (void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS; -static const struct socfpga_noc_fw_ddr_l3 *noc_fw_ddr_l3_base = - (void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS; -#endif -static struct scu_registers *scu_regs = - (struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS; + +struct bsel bsel_str[] = { + { "rsvd", "Reserved", }, + { "fpga", "FPGA (HPS2FPGA Bridge)", }, + { "nand", "NAND Flash (1.8V)", }, + { "nand", "NAND Flash (3.0V)", }, + { "sd", "SD/MMC External Transceiver (1.8V)", }, + { "sd", "SD/MMC Internal Transceiver (3.0V)", }, + { "qspi", "QSPI Flash (1.8V)", }, + { "qspi", "QSPI Flash (3.0V)", }, +};
int dram_init(void) { @@ -84,219 +72,6 @@ void v7_outer_cache_disable(void) clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); }
-/* - * DesignWare Ethernet initialization - */ -#ifdef CONFIG_ETH_DESIGNWARE -static void dwmac_deassert_reset(const unsigned int of_reset_id, - const u32 phymode) -{ - u32 physhift, reset; - - if (of_reset_id == EMAC0_RESET) { - physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB; - reset = SOCFPGA_RESET(EMAC0); - } else if (of_reset_id == EMAC1_RESET) { - physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB; - reset = SOCFPGA_RESET(EMAC1); -#ifndef CONFIG_TARGET_SOCFPGA_GEN5 - } else if (of_reset_id == EMAC2_RESET) { - reset = SOCFPGA_RESET(EMAC2); -#endif - } else { - printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id); - return; - } - -#if defined(CONFIG_TARGET_SOCFPGA_GEN5) - /* configure to PHY interface select choosed */ - clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl, - SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift, - phymode << physhift); -#else - clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET], - SYSMGR_EMACGRP_CTRL_PHYSEL_MASK, - phymode); -#endif - - /* Release the EMAC controller from reset */ - socfpga_per_reset(reset, 0); -} - -static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg) -{ - if (!phymode) - return -EINVAL; - - if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) { - *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; - return 0; - } - - if (!strcmp(phymode, "rgmii")) { - *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII; - return 0; - } - - if (!strcmp(phymode, "rmii")) { - *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII; - return 0; - } - - return -EINVAL; -} - -static int socfpga_eth_reset(void) -{ - const void *fdt = gd->fdt_blob; - struct fdtdec_phandle_args args; - const char *phy_mode; - u32 phy_modereg; - int nodes[2]; /* Max. two GMACs */ - int ret, count; - int i, node; - - /* Put both GMACs into RESET state. */ - socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1); - socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1); - - count = fdtdec_find_aliases_for_id(fdt, "ethernet", - COMPAT_ALTERA_SOCFPGA_DWMAC, - nodes, ARRAY_SIZE(nodes)); - for (i = 0; i < count; i++) { - node = nodes[i]; - if (node <= 0) - continue; - - ret = fdtdec_parse_phandle_with_args(fdt, node, "resets", - "#reset-cells", 1, 0, - &args); - if (ret || (args.args_count != 1)) { - debug("GMAC%i: Failed to parse DT 'resets'!\n", i); - continue; - } - - phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL); - ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg); - if (ret) { - debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i); - continue; - } - - dwmac_deassert_reset(args.args[0], phy_modereg); - } - - return 0; -} -#else -static int socfpga_eth_reset(void) -{ - return 0; -}; -#endif - -struct { - const char *mode; - const char *name; -} bsel_str[] = { - { "rsvd", "Reserved", }, - { "fpga", "FPGA (HPS2FPGA Bridge)", }, - { "nand", "NAND Flash (1.8V)", }, - { "nand", "NAND Flash (3.0V)", }, - { "sd", "SD/MMC External Transceiver (1.8V)", }, - { "sd", "SD/MMC Internal Transceiver (3.0V)", }, - { "qspi", "QSPI Flash (1.8V)", }, - { "qspi", "QSPI Flash (3.0V)", }, -}; - -static const struct { - const u16 pn; - const char *name; - const char *var; -} const socfpga_fpga_model[] = { - /* Cyclone V E */ - { 0x2b15, "Cyclone V, E/A2", "cv_e_a2" }, - { 0x2b05, "Cyclone V, E/A4", "cv_e_a4" }, - { 0x2b22, "Cyclone V, E/A5", "cv_e_a5" }, - { 0x2b13, "Cyclone V, E/A7", "cv_e_a7" }, - { 0x2b14, "Cyclone V, E/A9", "cv_e_a9" }, - /* Cyclone V GX/GT */ - { 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" }, - { 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" }, - { 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" }, - { 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" }, - { 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" }, - /* Cyclone V SE/SX/ST */ - { 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" }, - { 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" }, - { 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" }, - { 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" }, - /* Arria V */ - { 0x2d03, "Arria V, D5", "av_d5" }, -}; - -static int socfpga_fpga_id(const bool print_id) -{ - const u32 altera_mi = 0x6e; - const u32 id = scan_mgr_get_fpga_id(); - - const u32 lsb = id & 0x00000001; - const u32 mi = (id >> 1) & 0x000007ff; - const u32 pn = (id >> 12) & 0x0000ffff; - const u32 version = (id >> 28) & 0x0000000f; - int i; - - if ((mi != altera_mi) || (lsb != 1)) { - printf("FPGA: Not Altera chip ID\n"); - return -EINVAL; - } - - for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++) - if (pn == socfpga_fpga_model[i].pn) - break; - - if (i == ARRAY_SIZE(socfpga_fpga_model)) { - printf("FPGA: Unknown Altera chip, ID 0x%08x\n", id); - return -EINVAL; - } - - if (print_id) - printf("FPGA: Altera %s, version 0x%01x\n", - socfpga_fpga_model[i].name, version); - return i; -} - -/* - * Print CPU information - */ -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - const u32 bsel = (readl(&sysmgr_regs->bootinfo) >> - SYSMGR_BOOTINFO_BSEL_SHIFT) & 0x7; -#if defined(CONFIG_TARGET_SOCFPGA_GEN5) - puts("CPU: Altera SoCFPGA Platform\n"); - socfpga_fpga_id(1); -#else - puts("CPU: Altera SoCFPGA Arria 10\n"); -#endif - printf("BOOT: %s\n", bsel_str[bsel].name); - return 0; -} -#endif - -#ifdef CONFIG_ARCH_MISC_INIT -int arch_misc_init(void) -{ - const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7; - const int fpga_id = socfpga_fpga_id(0); - setenv("bootmode", bsel_str[bsel].mode); - if (fpga_id >= 0) - setenv("fpgatype", socfpga_fpga_model[fpga_id].var); - return socfpga_eth_reset(); -} -#endif - #if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \ defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE) int overwrite_console(void) @@ -327,15 +102,13 @@ static Altera_desc altera_fpga[] = { };
/* add device descriptor to FPGA device table */ -static void socfpga_fpga_add(void) +void socfpga_fpga_add(void) { int i; fpga_init(); for (i = 0; i < ARRAY_SIZE(altera_fpga); i++) fpga_add(fpga_altera, &altera_fpga[i]); } -#else -static inline void socfpga_fpga_add(void) {} #endif
int arch_cpu_init(void) @@ -361,173 +134,3 @@ int arch_cpu_init(void)
return 0; } - -#if defined(CONFIG_TARGET_SOCFPGA_GEN5) -/* - * Convert all NIC-301 AMBA slaves from secure to non-secure - */ -static void socfpga_nic301_slave_ns(void) -{ - writel(0x1, &nic301_regs->lwhps2fpgaregs); - writel(0x1, &nic301_regs->hps2fpgaregs); - writel(0x1, &nic301_regs->acp); - writel(0x1, &nic301_regs->rom); - writel(0x1, &nic301_regs->ocram); - writel(0x1, &nic301_regs->sdrdata); -} - -static uint32_t iswgrp_handoff[8]; - -int arch_early_init_r(void) -{ - int i; - - /* - * Write magic value into magic register to unlock support for - * issuing warm reset. The ancient kernel code expects this - * value to be written into the register by the bootloader, so - * to support that old code, we write it here instead of in the - * reset_cpu() function just before reseting the CPU. - */ - writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable); - - for (i = 0; i < 8; i++) /* Cache initial SW setting regs */ - iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]); - - socfpga_bridges_reset(1); - socfpga_nic301_slave_ns(); - - /* - * Private components security: - * U-Boot : configure private timer, global timer and cpu component - * access as non secure for kernel stage (as required by Linux) - */ - setbits_le32(&scu_regs->sacr, 0xfff); - - /* Configure the L2 controller to make SDRAM start at 0 */ -#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET - writel(0x2, &nic301_regs->remap); -#else - writel(0x1, &nic301_regs->remap); /* remap.mpuzero */ - writel(0x1, &pl310->pl310_addr_filter_start); -#endif - - /* Add device descriptor to FPGA device table */ - socfpga_fpga_add(); - -#ifdef CONFIG_DESIGNWARE_SPI - /* Get Designware SPI controller out of reset */ - socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0); - socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0); -#endif - -#ifdef CONFIG_NAND_DENALI - socfpga_per_reset(SOCFPGA_RESET(NAND), 0); -#endif - - return 0; -} - -static void socfpga_sdram_apply_static_cfg(void) -{ - const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + 0x505c; - const uint32_t applymask = 0x8; - uint32_t val = readl(staticcfg) | applymask; - - /* - * SDRAM staticcfg register specific: - * When applying the register setting, the CPU must not access - * SDRAM. Luckily for us, we can abuse i-cache here to help us - * circumvent the SDRAM access issue. The idea is to make sure - * that the code is in one full i-cache line by branching past - * it and back. Once it is in the i-cache, we execute the core - * of the code and apply the register settings. - * - * The code below uses 7 instructions, while the Cortex-A9 has - * 32-byte cachelines, thus the limit is 8 instructions total. - */ - asm volatile( - ".align 5 \n" - " b 2f \n" - "1: str %0, [%1] \n" - " dsb \n" - " isb \n" - " b 3f \n" - "2: b 1b \n" - "3: nop \n" - : : "r"(val), "r"(staticcfg) : "memory", "cc"); -} - -int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc != 2) - return CMD_RET_USAGE; - - argv++; - - switch (*argv[0]) { - case 'e': /* Enable */ - writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module); - socfpga_sdram_apply_static_cfg(); - writel(iswgrp_handoff[3], SOCFPGA_SDR_ADDRESS + 0x5080); - writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset); - writel(iswgrp_handoff[1], &nic301_regs->remap); - break; - case 'd': /* Disable */ - writel(0, &sysmgr_regs->fpgaintfgrp_module); - writel(0, SOCFPGA_SDR_ADDRESS + 0x5080); - socfpga_sdram_apply_static_cfg(); - writel(0, &reset_manager_base->brg_mod_reset); - writel(1, &nic301_regs->remap); - break; - default: - return CMD_RET_USAGE; - } - - return 0; -} -#else -/* -+ * This function initializes security policies to be consistent across -+ * all logic units in the Arria 10. -+ * -+ * The idea is to set all security policies to be normal, nonsecure -+ * for all units. -+ */ -static void initialize_security_policies(void) -{ - /* Put OCRAM in non-secure */ - writel(0x003f0000, &noc_fw_ocram_base->region0); - writel(0x1, &noc_fw_ocram_base->enable); - - /* Put DDR in non-secure */ - writel(0xffff0000, &noc_fw_ddr_l3_base->hpsregion0addr); - writel(0x1, &noc_fw_ddr_l3_base->enable); -} - -int arch_early_init_r(void) -{ - initialize_security_policies(); - - /* Configure the L2 controller to make SDRAM start at 0 */ - writel(0x1, &pl310->pl310_addr_filter_start); - - /* assert reset to all except L4WD0 and L4TIMER0 */ - socfpga_per_reset_all(); - - /* configuring the clock based on handoff */ - /* TODO: Add call to cm_basic_init() */ - - /* Add device descriptor to FPGA device table */ - socfpga_fpga_add(); - return 0; -} -#endif - -U_BOOT_CMD( - bridge, 2, 1, do_bridge, - "SoCFPGA HPS FPGA bridge control", - "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" - "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" - "" -); diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-socfpga/misc_arria10.c new file mode 100644 index 0000000..b0bc51c --- /dev/null +++ b/arch/arm/mach-socfpga/misc_arria10.c @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2016, Intel Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/io.h> +#include <errno.h> +#include <altera.h> +#include <miiphy.h> +#include <netdev.h> +#include <watchdog.h> +#include <asm/arch/misc.h> +#include <asm/arch/reset_manager.h> +#include <asm/arch/sdram_a10.h> +#include <asm/arch/system_manager.h> +#include <asm/arch/nic301.h> +#include <asm/pl310.h> + +DECLARE_GLOBAL_DATA_PTR; + +static struct pl310_regs *const pl310 = + (struct pl310_regs *)CONFIG_SYS_PL310_BASE; +static struct socfpga_system_manager *sysmgr_regs = + (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; +static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base = + (void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS; +static const struct socfpga_noc_fw_ddr_l3 *noc_fw_ddr_l3_base = + (void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS; + +/* + * DesignWare Ethernet initialization + */ +#ifdef CONFIG_ETH_DESIGNWARE +void dwmac_deassert_reset(const unsigned int of_reset_id, + const u32 phymode) +{ + u32 reset; + + if (of_reset_id == EMAC0_RESET) { + reset = SOCFPGA_RESET(EMAC0); + } else if (of_reset_id == EMAC1_RESET) { + reset = SOCFPGA_RESET(EMAC1); + } else if (of_reset_id == EMAC2_RESET) { + reset = SOCFPGA_RESET(EMAC2); + } else { + printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id); + return; + } + + clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET], + SYSMGR_EMACGRP_CTRL_PHYSEL_MASK, + phymode); + + /* Release the EMAC controller from reset */ + socfpga_per_reset(reset, 0); +} +#endif + +/* ++ * This function initializes security policies to be consistent across ++ * all logic units in the Arria 10. ++ * ++ * The idea is to set all security policies to be normal, nonsecure ++ * for all units. ++ */ +static void initialize_security_policies(void) +{ + /* Put OCRAM in non-secure */ + writel(0x003f0000, &noc_fw_ocram_base->region0); + writel(0x1, &noc_fw_ocram_base->enable); + + /* Put DDR in non-secure */ + writel(0xffff0000, &noc_fw_ddr_l3_base->hpsregion0addr); + writel(0x1, &noc_fw_ddr_l3_base->enable); +} + +int arch_early_init_r(void) +{ + initialize_security_policies(); + + /* Configure the L2 controller to make SDRAM start at 0 */ + writel(0x1, &pl310->pl310_addr_filter_start); + + /* assert reset to all except L4WD0 and L4TIMER0 */ + socfpga_per_reset_all(); + + /* configuring the clock based on handoff */ + /* TODO: Add call to cm_basic_init() */ + + /* Add device descriptor to FPGA device table */ + socfpga_fpga_add(); + return 0; +} + +/* + * Print CPU information + */ +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + const u32 bsel = (readl(&sysmgr_regs->bootinfo) >> + SYSMGR_BOOTINFO_BSEL_SHIFT) & 0x7; + + puts("CPU: Altera SoCFPGA Arria 10\n"); + + printf("BOOT: %s\n", bsel_str[bsel].name); + return 0; +} +#endif diff --git a/arch/arm/mach-socfpga/misc_gen5.c b/arch/arm/mach-socfpga/misc_gen5.c new file mode 100644 index 0000000..b91aeb1 --- /dev/null +++ b/arch/arm/mach-socfpga/misc_gen5.c @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2016, Intel Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/io.h> +#include <errno.h> +#include <fdtdec.h> +#include <libfdt.h> +#include <altera.h> +#include <miiphy.h> +#include <netdev.h> +#include <watchdog.h> +#include <asm/arch/misc.h> +#include <asm/arch/reset_manager.h> +#include <asm/arch/scan_manager.h> +#include <asm/arch/sdram_a10.h> +#include <asm/arch/system_manager.h> +#include <asm/arch/nic301.h> +#include <asm/arch/scu.h> +#include <asm/pl310.h> +#include <dt-bindings/reset/altr,rst-mgr.h> + +DECLARE_GLOBAL_DATA_PTR; + +static struct pl310_regs *const pl310 = + (struct pl310_regs *)CONFIG_SYS_PL310_BASE; +static struct socfpga_system_manager *sysmgr_regs = + (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; +static struct socfpga_reset_manager *reset_manager_base = + (struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS; +static struct nic301_registers *nic301_regs = + (struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS; +static struct scu_registers *scu_regs = + (struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS; + +/* + * DesignWare Ethernet initialization + */ +#ifdef CONFIG_ETH_DESIGNWARE +void dwmac_deassert_reset(const unsigned int of_reset_id, + const u32 phymode) +{ + u32 physhift; + u32 reset; + + if (of_reset_id == EMAC0_RESET) { + physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB; + + reset = SOCFPGA_RESET(EMAC0); + } else if (of_reset_id == EMAC1_RESET) { + physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB; + + reset = SOCFPGA_RESET(EMAC1); + } + else { + printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id); + return; + } + + /* configure to PHY interface select choosed */ + clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl, + SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift, + phymode << physhift); + + /* Release the EMAC controller from reset */ + socfpga_per_reset(reset, 0); +} + +/* + * DesignWare Ethernet initialization + */ +static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg) +{ + if (!phymode) + return -EINVAL; + + if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) { + *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; + return 0; + } + + if (!strcmp(phymode, "rgmii")) { + *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII; + return 0; + } + + if (!strcmp(phymode, "rmii")) { + *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII; + return 0; + } + + return -EINVAL; +} + +static int socfpga_eth_reset(void) +{ + const void *fdt = gd->fdt_blob; + struct fdtdec_phandle_args args; + const char *phy_mode; + u32 phy_modereg; + int nodes[2]; /* Max. two GMACs */ + int ret, count; + int i, node; + + /* Put both GMACs into RESET state. */ + socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1); + socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1); + + count = fdtdec_find_aliases_for_id(fdt, "ethernet", + COMPAT_ALTERA_SOCFPGA_DWMAC, + nodes, ARRAY_SIZE(nodes)); + for (i = 0; i < count; i++) { + node = nodes[i]; + if (node <= 0) + continue; + + ret = fdtdec_parse_phandle_with_args(fdt, node, "resets", + "#reset-cells", 1, 0, + &args); + if (ret || (args.args_count != 1)) { + debug("GMAC%i: Failed to parse DT 'resets'!\n", i); + continue; + } + + phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL); + ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg); + if (ret) { + debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i); + continue; + } + + dwmac_deassert_reset(args.args[0], phy_modereg); + } + + return 0; +} +#else +static int socfpga_eth_reset(void) +{ + return 0; +}; +#endif + +static const struct { + const u16 pn; + const char *name; + const char *var; +} const socfpga_fpga_model[] = { + /* Cyclone V E */ + { 0x2b15, "Cyclone V, E/A2", "cv_e_a2" }, + { 0x2b05, "Cyclone V, E/A4", "cv_e_a4" }, + { 0x2b22, "Cyclone V, E/A5", "cv_e_a5" }, + { 0x2b13, "Cyclone V, E/A7", "cv_e_a7" }, + { 0x2b14, "Cyclone V, E/A9", "cv_e_a9" }, + /* Cyclone V GX/GT */ + { 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" }, + { 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" }, + { 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" }, + { 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" }, + { 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" }, + /* Cyclone V SE/SX/ST */ + { 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" }, + { 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" }, + { 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" }, + { 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" }, + /* Arria V */ + { 0x2d03, "Arria V, D5", "av_d5" }, +}; + +static int socfpga_fpga_id(const bool print_id) +{ + const u32 altera_mi = 0x6e; + const u32 id = scan_mgr_get_fpga_id(); + + const u32 lsb = id & 0x00000001; + const u32 mi = (id >> 1) & 0x000007ff; + const u32 pn = (id >> 12) & 0x0000ffff; + const u32 version = (id >> 28) & 0x0000000f; + int i; + + if ((mi != altera_mi) || (lsb != 1)) { + printf("FPGA: Not Altera chip ID\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++) + if (pn == socfpga_fpga_model[i].pn) + break; + + if (i == ARRAY_SIZE(socfpga_fpga_model)) { + printf("FPGA: Unknown Altera chip, ID 0x%08x\n", id); + return -EINVAL; + } + + if (print_id) + printf("FPGA: Altera %s, version 0x%01x\n", + socfpga_fpga_model[i].name, version); + return i; +} + +#ifdef CONFIG_ARCH_MISC_INIT +int arch_misc_init(void) +{ + const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7; + const int fpga_id = socfpga_fpga_id(0); + setenv("bootmode", bsel_str[bsel].mode); + if (fpga_id >= 0) + setenv("fpgatype", socfpga_fpga_model[fpga_id].var); + return socfpga_eth_reset(); +} +#endif + +/* + * Convert all NIC-301 AMBA slaves from secure to non-secure + */ +static void socfpga_nic301_slave_ns(void) +{ + writel(0x1, &nic301_regs->lwhps2fpgaregs); + writel(0x1, &nic301_regs->hps2fpgaregs); + writel(0x1, &nic301_regs->acp); + writel(0x1, &nic301_regs->rom); + writel(0x1, &nic301_regs->ocram); + writel(0x1, &nic301_regs->sdrdata); +} + +static uint32_t iswgrp_handoff[8]; + +int arch_early_init_r(void) +{ + int i; + + /* + * Write magic value into magic register to unlock support for + * issuing warm reset. The ancient kernel code expects this + * value to be written into the register by the bootloader, so + * to support that old code, we write it here instead of in the + * reset_cpu() function just before reseting the CPU. + */ + writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable); + + for (i = 0; i < 8; i++) /* Cache initial SW setting regs */ + iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]); + + socfpga_bridges_reset(1); + socfpga_nic301_slave_ns(); + + /* + * Private components security: + * U-Boot : configure private timer, global timer and cpu component + * access as non secure for kernel stage (as required by Linux) + */ + setbits_le32(&scu_regs->sacr, 0xfff); + + /* Configure the L2 controller to make SDRAM start at 0 */ +#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET + writel(0x2, &nic301_regs->remap); +#else + writel(0x1, &nic301_regs->remap); /* remap.mpuzero */ + writel(0x1, &pl310->pl310_addr_filter_start); +#endif + + /* Add device descriptor to FPGA device table */ + socfpga_fpga_add(); + +#ifdef CONFIG_DESIGNWARE_SPI + /* Get Designware SPI controller out of reset */ + socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0); + socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0); +#endif + +#ifdef CONFIG_NAND_DENALI + socfpga_per_reset(SOCFPGA_RESET(NAND), 0); +#endif + + return 0; +} + +static void socfpga_sdram_apply_static_cfg(void) +{ + const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + 0x505c; + const uint32_t applymask = 0x8; + uint32_t val = readl(staticcfg) | applymask; + + /* + * SDRAM staticcfg register specific: + * When applying the register setting, the CPU must not access + * SDRAM. Luckily for us, we can abuse i-cache here to help us + * circumvent the SDRAM access issue. The idea is to make sure + * that the code is in one full i-cache line by branching past + * it and back. Once it is in the i-cache, we execute the core + * of the code and apply the register settings. + * + * The code below uses 7 instructions, while the Cortex-A9 has + * 32-byte cachelines, thus the limit is 8 instructions total. + */ + asm volatile( + ".align 5 \n" + " b 2f \n" + "1: str %0, [%1] \n" + " dsb \n" + " isb \n" + " b 3f \n" + "2: b 1b \n" + "3: nop \n" + : : "r"(val), "r"(staticcfg) : "memory", "cc"); +} + +int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if (argc != 2) + return CMD_RET_USAGE; + + argv++; + + switch (*argv[0]) { + case 'e': /* Enable */ + writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module); + socfpga_sdram_apply_static_cfg(); + writel(iswgrp_handoff[3], SOCFPGA_SDR_ADDRESS + 0x5080); + writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset); + writel(iswgrp_handoff[1], &nic301_regs->remap); + break; + case 'd': /* Disable */ + writel(0, &sysmgr_regs->fpgaintfgrp_module); + writel(0, SOCFPGA_SDR_ADDRESS + 0x5080); + socfpga_sdram_apply_static_cfg(); + writel(0, &reset_manager_base->brg_mod_reset); + writel(1, &nic301_regs->remap); + break; + default: + return CMD_RET_USAGE; + } + + return 0; +} + +U_BOOT_CMD( + bridge, 2, 1, do_bridge, + "SoCFPGA HPS FPGA bridge control", + "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" + "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" + "" +); + +/* + * Print CPU information + */ +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + const u32 bsel = (readl(&sysmgr_regs->bootinfo) >> + SYSMGR_BOOTINFO_BSEL_SHIFT) & 0x7; + + puts("CPU: Altera SoCFPGA Platform\n"); + socfpga_fpga_id(1); + + printf("BOOT: %s\n", bsel_str[bsel].name); + return 0; +} +#endif