Re: [U-Boot] [PATCH 2/2] MPC8308RDB: minimal support for devboard from Freescale

On Wed, 7 Jul 2010 20:16:13 +0400 Ilya Yanok yanok@emcraft.com wrote:

This patch provides support for MPC8308RDB development board from Freescale with a minimal set of features: Dual UART is supported NOR flash is supported Both TSEC Ethernet controllers are supported PCI Express initialization is supported

The following features are enabled in configuration but not fully tested: I2C (used to get the board revision) I2C-connected RTC VSC7385 switch

There is one (hopefully) minor issue: on soft reset the board sometimes resets twice. I've not managed to find the fix for this problem yet. As a workaround instruction cache can be disabled.

Signed-off-by: Ilya Yanok yanok@emcraft.com

Applied, after relocating the boards.cfg entry to maintain the correct sort order.

Thanks,

Kim