Hello Marek,
If the USB is detected successfully, then below are the logs.
U-Boot > usb start (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 8 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0xFF usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0xFF Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 set address 2 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x2 index 0x0 length 0x0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x20 get_conf_no 0 Result 32, wLength 32 if 0, ep 0 if 0, ep 1 ##EP epmaxpacketin[1] = 512 ##EP epmaxpacketout[2] = 512 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 new device strings: Mfr=1, Product=2, SerialNumber=3 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF USB device number 2 default language ID 0x409 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 length 0xFF usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x409 length 0xFF usb_control_msg: request: 0x6, requesttype: 0x80, value 0x303 index 0x409 length 0xFF Manufacturer JetFlash Product Mass Storage Device SerialNumber 99TL2DWA1OQMAIUS 2 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... New Device 2 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 set address 3 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x3 index 0x0 length 0x0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 8 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF USB device number 3 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0xFF usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0xFF Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 New Device 3 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 set address 4 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x4 index 0x0 length 0x0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x20 get_conf_no 0 Result 32, wLength 32 if 0, ep 0 if 0, ep 1 ##EP epmaxpacketin[1] = 512 ##EP epmaxpacketout[2] = 512 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 new device strings: Mfr=1, Product=2, SerialNumber=3 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF USB device number 4 default language ID 0x409 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 length 0xFF usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x409 length 0xFF usb_control_msg: request: 0x6, requesttype: 0x80, value 0x303 index 0x409 length 0xFF Manufacturer JetFlash Product Mass Storage Device SerialNumber 99TL2DWA1OQMAIUS 2 USB Device(s) found scan end scanning usb for storage devices... usb_control_msg: request: 0xFE, requesttype: 0xA1, value 0x0 index 0x0 length 0x1 EHCI timed out on TD - token=0x80008c80 usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length 0x0 EHCI timed out on TD - token=0x80008d80 usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length 0x0 EHCI timed out on TD - token=0x80008d80 usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length 0x0 EHCI timed out on TD - token=0x80008d80 usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length 0x0 EHCI timed out on TD - token=0x80008d80 usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length 0x0 EHCI timed out on TD - token=0x80008d80 error in inquiry usb_control_msg: request: 0xFE, requesttype: 0xA1, value 0x0 index 0x0 length 0x1 1 Storage Device(s) found
I would be really happy to receive your help.
Regards, Manju
----- Original Message ----- From: "Manjunath" manjunath@tes-dst.com To: "u-boot" u-boot@lists.denx.de Cc: marex@denx.de, "marek vasut" marek.vasut@gmail.com Sent: Thursday, April 21, 2016 11:19:03 AM Subject: Fwd: EHCI timed out on TD - token=0x80008d80
----- Forwarded Message ----- From: "Manjunath" manjunath@tes-dst.com To: "fabio estevam" fabio.estevam@nxp.com Sent: Wednesday, April 20, 2016 4:03:05 PM Subject: Re: EHCI timed out on TD - token=0x80008d80
Hi Fabio,
No it doesn't.
I enabled debug prints and i get the following.
U-Boot > usb start (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 8 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0xFF usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0xFF Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 1 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 set address 2 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x2 index 0x0 length 0x0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 8 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF USB device number 2 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0xFF usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0xFF Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 1 USB Device(s) found scan end scanning usb for storage devices... 0 Storage Device(s) found
Regards, Manju
----- Original Message ----- From: "fabio estevam" fabio.estevam@nxp.com To: "Manjunath" manjunath@tes-dst.com Sent: Monday, April 18, 2016 6:16:18 PM Subject: Re: EHCI timed out on TD - token=0x80008d80
Hi Manju,
Does setting USB_MAX_XFER_BLK to 32767 solve this issue?
Regards,
Fabio Estevam
________________________________________ From: Manjunath manjunath@tes-dst.com Sent: Monday, April 18, 2016 4:14:08 AM To: Fabio Estevam Subject: EHCI timed out on TD - token=0x80008d80
Hello Fabio,
Hope you are doing well. I needed your help in solving one issue that i am stuck with.
The issue is regarding u-boot 2013.04 version. This version supports USB. The issue i am facing is,
EHCI timed out on TD - token=0x80008d80
This time out error occurs when i flash u-boot first time on the board. But first time even though this error is seen the USB is detected and content of USB can be accessed./
For the second time when i reboot, the same USB key is not detected since i get below error,
U-Boot > usb start
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
Please let me know what is your view on this. Since you are a member of u-boot community i am assuming that somebody would have had this issue before. I have tried mailing to u-boot team but i didn't get any response.
I need your help.
Regards, Manju