On Monday 16 February 2009, Afzal Nadirshah wrote:
I did as suggested by you. I also set the serverip as well as ipaddr. Now when i do a tftp 100000 u-boot-nand.bin, i get the following :
=> tftp 100000 u-boot-nand.bin Waiting for PHY auto negotiation to complete...... TIMEOUT !
!!!
done ENET Speed is 10 Mbps - HALF duplex connection (EMAC0) Using ppc_4xx_eth0 device TFTP from server 172.22.68.33; our IP address is 172.22.68.36 Filename 'u-boot-nand.bin'. Load address: 0x100000 Loading: *
It hangs at this point
Your board doesn't have a correct ethernet link. Is this really the original Canyonlands board? Is the correct ethernet port connected?
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================