On Mon, Oct 04, 2021 at 05:54:46PM +0200, Jan Kiszka wrote:
On 04.10.21 01:34, Tom Rini wrote:
On Sat, Sep 18, 2021 at 08:17:53AM +0200, Jan Kiszka wrote:
From: Jan Kiszka jan.kiszka@siemens.com
This adds support for the IOT2050 Basic and Advanced devices. The Basic used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS quad-core version.
Both variants are booted via a Siemens-provided FSBL that runs on the R5 cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot SPL, ATF and TEE have to reside in SPI flash.
Full integration into a bootable image can be found on https://github.com/siemens/meta-iot2050
Based on original board support by Le Jin, Gao Nian and Chao Zeng.
Signed-off-by: Jan Kiszka jan.kiszka@siemens.com
Applied to u-boot/next, thanks!
Thanks for merging - it just does not boot anymore, no output after TF-A. Trying to understand the differences now, already ruled out arch/arm/dts/k3-am65* as source.
Have you enabled debug uart? I found that quite helpful figuring out what was wrong when updating the dts files, and the correct values for that are in the dts files too.