
On 10/06/2014 05:54 AM, Ashish Kumar wrote:
- fdt_fixup_mtdparts is called from ft_board_setup
- run "mtdparts default" to create NAND, NOR partition on uboot
- Use mtdparts to create partitions dynamically rather than using static partitions in device tree
Signed-off-by: Ashish Kumar Ashish.Kumar@freescale.com
board/freescale/bsc9132qds/bsc9132qds.c | 12 ++++++++++++ include/configs/BSC9132QDS.h | 21 +++++++++++++++++++++ 2 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c index 10580bc..c88838b 100644 --- a/board/freescale/bsc9132qds/bsc9132qds.c +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -21,6 +21,9 @@ #include <hwconfig.h> #include <i2c.h> #include <fsl_ddr_sdram.h> +#include <jffs2/load_kernel.h> +#include <mtd_node.h> +#include <flash.h>
#ifdef CONFIG_PCI #include <pci.h> @@ -354,6 +357,12 @@ void fdt_del_node_compat(void *blob, const char *compatible) }
#if defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_FDT_FIXUP_PARTITIONS +struct node_info nodes[] = {
- { "cfi-flash", MTD_DEV_TYPE_NOR, },
- { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
+}; +#endif void ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; @@ -369,6 +378,9 @@ void ft_board_setup(void *blob, bd_t *bd) #endif
fdt_fixup_memory(blob, (u64)base, (u64)size); +#ifdef CONFIG_FDT_FIXUP_PARTITIONS
- fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+#endif
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); u32 porbmsr = in_be32(&gur->porbmsr); diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index aeded6d..da78a19 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -630,6 +630,27 @@ combinations. this should be removed later #endif
/*
- Dynamic MTD Partition support with mtdparts
- */
+#ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash," +#define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \
"55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \
"8m(kernel),512k(dtb),-(fs)"
+#endif
Isn't this patch conflict with your earlier patch? http://patchwork.ozlabs.org/patch/391991/
York