On 3/28/23 09:21, Michal Simek wrote:
Fix model name, node locations and also add pinctrl description for usb.
Signed-off-by: Michal Simek michal.simek@amd.com
arch/arm/dts/zynq-microzed.dts | 42 ++++++++++++++++++++++++++++------ 1 file changed, 35 insertions(+), 7 deletions(-)
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts index b95eb3ed2434..5f280f4d8ece 100644 --- a/arch/arm/dts/zynq-microzed.dts +++ b/arch/arm/dts/zynq-microzed.dts @@ -8,7 +8,7 @@ #include "zynq-7000.dtsi"
/ {
- model = "Zynq MicroZED Board";
model = "Avnet MicroZed board"; compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
aliases {
@@ -19,7 +19,7 @@
memory@0 { device_type = "memory";
reg = <0 0x40000000>;
reg = <0x0 0x40000000>;};
chosen {
@@ -42,11 +42,6 @@ status = "okay"; };
-&uart1 {
- bootph-all;
- status = "okay";
-};
- &gem0 { status = "okay"; phy-mode = "rgmii-id";
@@ -62,8 +57,41 @@ status = "okay"; };
+&uart1 {
- bootph-all;
- status = "okay";
+};
- &usb0 { status = "okay"; dr_mode = "host"; usb-phy = <&usb_phy0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0_default>;
+};
+&pinctrl0 {
- pinctrl_usb0_default: usb0-default {
mux {groups = "usb0_0_grp";function = "usb0";};conf {groups = "usb0_0_grp";slew-rate = <0>;io-standard = <1>;};conf-rx {pins = "MIO29", "MIO31", "MIO36";bias-high-impedance;};conf-tx {pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34","MIO35", "MIO37", "MIO38", "MIO39";bias-disable;};- }; };
Applied. M