These commands should work around various "hardware" ECC and BCH methods.
Signed-off-by: Marek Vasut marek.vasut@gmail.com Cc: Scott Wood scottwood@freescale.com Cc: Stefano Babic sbabic@denx.de Cc: Wolfgang Denk wd@denx.de Cc: Detlev Zundel dzu@denx.de --- common/cmd_nand.c | 19 +++++++++++++++++++ doc/README.nand | 9 +++++++++ 2 files changed, 28 insertions(+), 0 deletions(-)
V2: Add documentation. V3: Drop size param. V4: Dont drop size of read/write commands, operate on pages
diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 66e06a5..14c7c09 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -606,6 +606,22 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) ret = nand->read_oob(nand, off, &ops); else ret = nand->write_oob(nand, off, &ops); + } else if (!strcmp(s, ".raw")) { + /* Raw access */ + mtd_oob_ops_t ops = { + .datbuf = (u8 *)addr, + .oobbuf = ((u8 *)addr) + nand->writesize, + .len = nand->writesize, + .ooblen = nand->oobsize, + .mode = MTD_OOB_RAW + }; + + rwsize = nand->writesize + nand->oobsize; + + if (read) + ret = nand->read_oob(nand, off, &ops); + else + ret = nand->write_oob(nand, off, &ops); } else { printf("Unknown nand command suffix '%s'.\n", s); return 1; @@ -699,6 +715,9 @@ U_BOOT_CMD( "nand write - addr off|partition size\n" " read/write 'size' bytes starting at offset 'off'\n" " to/from memory address 'addr', skipping bad blocks.\n" + "nand read.raw - addr off|partition\n" + "nand write.raw - addr off|partition\n" + " Use read.raw/write.raw to avoid ECC and write the page as-is.\n" #ifdef CONFIG_CMD_NAND_TRIMFFS "nand write.trimffs - addr off|partition size\n" " write 'size' bytes starting at offset 'off' from memory address\n" diff --git a/doc/README.nand b/doc/README.nand index 751b693..023740e 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -94,6 +94,15 @@ Commands: of data for one 512-byte page or 2 256-byte pages. There is no check for bad blocks.
+ nand read.raw addr ofs|partition + Read page from `ofs' in NAND flash to `addr'. This reads the raw page, + so ECC is avoided and the OOB area is read as well. + + nand write.raw addr ofs|partition + Write page from `addr' to `ofs' in NAND flash. This writes the raw page, + so ECC is avoided and the OOB area is written as well, making the whole + page written as-is. + Configuration Options:
CONFIG_CMD_NAND