On Wed, May 2, 2018 at 3:11 PM Lukasz Majewski lukma@denx.de wrote:
New, SPL related config option - CONFIG_SPL_BOOTCOUNT_LIMIT has been added to allow drivers/bootcount code re-usage in SPL.
This code is necessary to use and setup bootcount in SPL in the case of falcon boot mode.
Signed-off-by: Lukasz Majewski lukma@denx.de Reviewed-by: Stefan Roese sr@denx.de Reviewed-by: Tom Rini trini@konsulko.com
Reviewed-by: Alex Kiernan alex.kiernan@gmail.com
Changes in v5:
- None
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None
common/spl/Kconfig | 9 +++++++++ drivers/Makefile | 1 + 2 files changed, 10 insertions(+)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 259f96607e..431710a93b 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -54,6 +54,15 @@ config SPL_BOOTROM_SUPPORT BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in
the
boot device list, if not implemented for a given board)
+config SPL_BOOTCOUNT_LIMIT
bool "Support bootcount in SPL"depends on SPL_ENV_SUPPORThelpOn some boards, which use 'falcon' mode, it is necessary to
check
and increment the number of boot attempts. Such boards do notuse proper U-Boot for normal boot flow and hence needs thoseadjustments to be done in the SPL.- config SPL_RAW_IMAGE_SUPPORT bool "Support SPL loading and booting of RAW images" default n if (ARCH_MX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT))
diff --git a/drivers/Makefile b/drivers/Makefile index 6846d181aa..061331eadd 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/ ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/ obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/ obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/ obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/ -- 2.11.0