So I have downloaded a 'fresh and clean' copy of the latest git and configured for several existing Freescale based MPC boards.
Example: make ARCH=ppc CROSS_COMPILE='ppc_6xx-' MPC8360ERDK_config make ARCH=ppc CROSS_COMPILE='ppc_6xx-' all
I still get the same errors, i.e. __kernel_dev_t_ being defined twice, etc.. And then lots of md5.c complaints about implicit declarations of functions that shouldn't have issues, as they are declared in #included in <string.h>
Is there a chance the include path statements are mis-configured on my system? How does one check that?
-Russ
-----Original Message----- From: wd@denx.de [mailto:wd@denx.de] Sent: Wednesday, May 28, 2008 2:56 PM To: rmcguire@videopresence.com Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] Latest U-Boot MD5 compile error??
In message F9448BAF273D479DB7935923C812A0BB@absolutdaddy you wrote:
Just pulled the latest GIT down today <1.3.3+>, merged with my current
code.
<Note, last I pulled was back at 1.3.1>.
Anyway, all is well until the newish MD5 code attempts to compile then I
get
two different types of errors. <See Log Below>
Is this an artificat of an uncomplete merge perhaps?
Probably. Try building for some other boards...
Dependencies on a certain level of kernel that needs to be sitting in the ppc_6xx/usr/src/ directory? Or perhaps is FC5 to old to now correctly compile the latest U-boot? To old of an ELDK? <I am using ELDK 4.1>
Just tried to build a few boards on a FC5 host. A few warnings about including /usr/include/asm/byteorder.h, but it builds fine.
Best regards,
Wolfgang Denk