Lukasz,
I am looking at the usb mass storage gadget patch from you at: http://patchwork.ozlabs.org/patch/104516/
I am trying to use this patch in the u-boot. Some questions: 1) Is this patch in U-boot git release? 2) Now I can use the patch and process till SCSI MODE_SELECT_6 command, and then problem is encountered. Basically the SCSI MODE_SELECT_6 is sent to EP1 Out, then data is sent to EP1 out, and the fsg_main_thread only sees the data. I change the code to force the CSW.
The changes are: 1) fix the buf pointer in scsi inquiry 2) fix the buf pointer in scsi read format capacities 3) fix the buf pointer in CSW sending 4) fix attention condition checking in scsi command check 5) fix the context pointer before queue a request to read bulk only CBW 6) change bulk out endpoint from endpoint 2 to endpoint 1 to accommodate gen2 usb hardware limitation 7) in pad_with_zeros(), comment out the bh->inreq->length = nsend 8) in received_cbw(), force to send CSW if CBW is invalid. Otherwise, the IRQ routine keeps on reading the same data.
I attach the file for your reference. Please kindly advise me. Thanks.
Thanks, victor
================================================================================================ CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and may be protected by legal privilege. If you are not the intended addressee (or authorized to receive for the addressee). be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation. KeyASIC Inc. ================================================================================================