This patch series superseeds the following two:
From Vladimir Oltean
https://patchwork.ozlabs.org/cover/1031360/
From me:
https://patchwork.ozlabs.org/cover/1184507/
Although the first is marked as accepted into u-boot-net I guess it was removed due to broken boards ("DT as ABI", RGMII delay was fixed and thus breaks the board).
After disussing with Vladimir, I've integrated his patches with this series. Also the first one Address packet drops at low traffic rate due to SmartEEE feature was dropped because it will likely be fixed by making u-boot support the eee-broken-X device tree properties. Apart from that, only the subject was changed and a note about possible board breakage was added the patch which changes the delay behaviour.
For all of those, who will test this patchset, the device tree binding needs the phydev->node property, which needs to be set in every network driver. If the device tree binding is not working for you have a look at the ar803x_of_init: found PHY node: phy@0 output. In the case above "phy@0" is the phy node in the device tree. If instead the node of your network device is displayed, you have to set the phydev->node property in your network device driver.
For the fsl_enetc driver this patchset will add it: https://patchwork.ozlabs.org/cover/1188043/
changes since v2: - rebased onto latest master, esp. #include <dm/device_compat.h>
changes since v1: - pull all Vladimirs Oltan's patches and rebase mine onto them - fix the CLK_25M settings for the AR8035 - add two new patches "fix AR8021 PHY ID mask" and "use defines for PHY IDs" - use the new kernel device tree binding for the AR803x PHYs: https://patchwork.ozlabs.org/patch/1188293/ - add debugging output
Michael Walle (7): phy: atheros: fix AR8021 PHY ID mask phy: atheros: use defines for PHY IDs phy: atheros: introduce debug read and write functions phy: atheros: move delay config to common function phy: atheros: add device tree bindings and config phy: atheros: ar8035: remove static clock config phy: atheros: consolidate {ar8031|ar8035}_config()
Vladimir Oltean (5): phy: atheros: Make RGMII Tx delays actually configurable for AR8035 phy: atheros: Use common functions for RGMII internal delays phy: atheros: Clarify the configuration of the CLK_25M output pin phy: atheros: Explicitly disable RGMII delays phy: atheros: Clarify the intention of ar8021_config
doc/device-tree-bindings/net/phy/atheros.txt | 35 ++ drivers/net/phy/atheros.c | 350 ++++++++++++++++--- include/dt-bindings/net/qca-ar803x.h | 13 + 3 files changed, 345 insertions(+), 53 deletions(-) create mode 100644 doc/device-tree-bindings/net/phy/atheros.txt create mode 100644 include/dt-bindings/net/qca-ar803x.h