Signed-off-by: Josh Wu josh.wu@atmel.com --- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 ++++ board/atmel/at91sam9260ek/at91sam9260ek.c | 10 ++++++++++ include/configs/at91sam9260ek.h | 16 ++++++++++++++-- 3 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c index 19ec615..5e995e1 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -203,6 +203,10 @@ void at91_macb_hw_init(void) #if defined(CONFIG_GENERIC_ATMEL_MCI) void at91_mci_hw_init(void) { + /* Enable mci clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_MCI, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */ #if defined(CONFIG_ATMEL_MCI_PORTB) at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */ diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 3aa394a..1e7b33e 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -30,6 +30,7 @@ #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> +#include <atmel_mci.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) # include <net.h> @@ -143,6 +144,15 @@ static void at91sam9260ek_macb_hw_init(void) } #endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bd) +{ + at91_mci_hw_init(); + + return atmel_mci_init((void *)ATMEL_BASE_MCI); +} +#endif + int board_early_init_f(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index ebcc69a..f6193bb 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -105,6 +105,8 @@ #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT #define CONFIG_CMD_USB 1
/* @@ -158,6 +160,18 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 #endif
+/* MMC */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +/* FAT */ +#ifdef CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* NOR flash - no real flash on this board */ #define CONFIG_SYS_NO_FLASH 1
@@ -170,13 +184,11 @@ /* USB */ #define CONFIG_USB_ATMEL #define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */