This patch adds the IO settings required for OMAP5432 uevm's DDR3 pads
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- arch/arm/cpu/armv7/omap5/hwinit.c | 98 +++++++++++++++++++++++++------ arch/arm/include/asm/arch-omap5/omap.h | 15 +++++- 2 files changed, 93 insertions(+), 20 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index e2f76a1..df0b760 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -52,6 +52,81 @@ static struct gpio_bank gpio_bank_54xx[6] = { const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
#ifdef CONFIG_SPL_BUILD +/* LPDDR2 specific IO settings */ +static void io_settings_lpddr2(void) +{ + struct omap_sys_ctrl_regs *ioregs_base = + (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; + + writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, + &(ioregs_base->control_ddrch1_0)); + writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, + &(ioregs_base->control_ddrch1_1)); + writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, + &(ioregs_base->control_ddrch2_0)); + writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, + &(ioregs_base->control_ddrch2_1)); + writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, + &(ioregs_base->control_lpddr2ch1_0)); + writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, + &(ioregs_base->control_lpddr2ch1_1)); + writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, + &(ioregs_base->control_ddrio_0)); + writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, + &(ioregs_base->control_ddrio_1)); + writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, + &(ioregs_base->control_ddrio_2)); +} + +/* DDR3 specific IO settings */ +static void io_settings_ddr3(void) +{ + u32 io_settings = 0; + struct omap_sys_ctrl_regs *ioregs_base = + (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; + + writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, + &(ioregs_base->control_ddr3ch1_0)); + writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, + &(ioregs_base->control_ddrch1_0)); + writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, + &(ioregs_base->control_ddrch1_1)); + + writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, + &(ioregs_base->control_ddr3ch2_0)); + writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, + &(ioregs_base->control_ddrch2_0)); + writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, + &(ioregs_base->control_ddrch2_1)); + + writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE, + &(ioregs_base->control_ddrio_0)); + writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE, + &(ioregs_base->control_ddrio_1)); + writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE, + &(ioregs_base->control_ddrio_2)); + + /* omap5432 does not use lpddr2 */ + writel(0x0, &(ioregs_base->control_lpddr2ch1_0)); + writel(0x0, &(ioregs_base->control_lpddr2ch1_1)); + + writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, + &(ioregs_base->control_emif1_sdram_config_ext)); + writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, + &(ioregs_base->control_emif2_sdram_config_ext)); + + /* Disable DLL select */ + io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config)) + & 0xFFEFFFFF); + writel(io_settings, + &(ioregs_base->control_port_emif1_sdram_config)); + + io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config)) + & 0xFFEFFFFF); + writel(io_settings, + &(ioregs_base->control_port_emif2_sdram_config)); +} + /* * Some tuning of IOs for optimal power and performance */ @@ -115,25 +190,10 @@ void do_io_settings(void) (sc_fast << 17) | (sc_fast << 14); writel(io_settings, &(ioregs_base->control_smart3io_padconf_1));
- /* LPDDR2 io settings */ - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch1_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch1_1)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch2_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch2_1)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - &(ioregs_base->control_lpddr2ch1_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - &(ioregs_base->control_lpddr2ch1_1)); - writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, - &(ioregs_base->control_ddrio_0)); - writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, - &(ioregs_base->control_ddrio_1)); - writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, - &(ioregs_base->control_ddrio_2)); + if (omap_revision() <= OMAP5430_ES1_0) + io_settings_lpddr2(); + else + io_settings_ddr3();
/* Efuse settings */ writel(EFUSE_1, &(ioregs_base->control_efuse_1)); diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 0a4c8ec..f0658d0 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -179,7 +179,14 @@ struct omap_sys_ctrl_regs { u32 control_srcomp_east_side; /*0x4A002E7C*/ u32 control_srcomp_west_side; /*0x4A002E80*/ u32 control_srcomp_code_latch; /*0x4A002E84*/ - u32 pad4[3680198]; + u32 pad4[3679394]; + u32 control_port_emif1_sdram_config; /*0x4AE0C110*/ + u32 control_port_emif1_lpddr2_nvm_config; /*0x4AE0C114*/ + u32 control_port_emif2_sdram_config; /*0x4AE0C118*/ + u32 pad5[10]; + u32 control_emif1_sdram_config_ext; /* 0x4AE0C144 */ + u32 control_emif2_sdram_config_ext; /* 0x4AE0C148 */ + u32 pad6[789]; u32 control_smart1nopmio_padconf_0; /* 0x4AE0CDA0 */ u32 control_smart1nopmio_padconf_1; /* 0x4AE0CDA4 */ u32 control_padconf_mode; /* 0x4AE0CDA8 */ @@ -234,6 +241,12 @@ struct omap_sys_ctrl_regs { #define DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL 0x8421084 #define DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL 0x8421000
+#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL 0x7C7C7C6C +#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL 0x64646464 +#define DDR_IO_0_VREF_CELLS_DDR3_VALUE 0xBAE8C631 +#define DDR_IO_1_VREF_CELLS_DDR3_VALUE 0xBC6318DC +#define DDR_IO_2_VREF_CELLS_DDR3_VALUE 0x0 + #define EFUSE_1 0x45145100 #define EFUSE_2 0x45145100 #define EFUSE_3 0x45145100