Boards can pass display timing info for drivers using EDID block. Provide common function to add board specific EDID data to the device tree. Subsequent patch makes use of this functionality.
Detailed timing descriptor data from EDID is used for programming the display controller. This is currently implemented on the Linux side by the fsl-diu-fb frame buffer driver and it is documented there in Documentation/powerpc/dts-bindings/fsl/diu.txt.
Signed-off-by: Anatolij Gustschin agust@denx.de Acked-by: Detlev Zundel dzu@denx.de Cc: Gerald Van Baren vanbaren@cideas.com --- v2: - improve commit message as suggested by Detlev - add Acked-by line
common/fdt_support.c | 29 +++++++++++++++++++++++++++++ include/fdt_support.h | 1 + 2 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/common/fdt_support.c b/common/fdt_support.c index 33336be..13c8882 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -1171,3 +1171,32 @@ int fdt_alloc_phandle(void *blob)
return phandle + 1; } + +#if defined(CONFIG_VIDEO) +int fdt_add_edid(void *blob, const char *compat, unsigned char *edid_buf) +{ + int noff; + int ret; + + noff = fdt_node_offset_by_compatible(blob, -1, compat); + if (noff != -FDT_ERR_NOTFOUND) { + debug("%s: %s\n", fdt_get_name(blob, noff, 0), compat); +add_edid: + ret = fdt_setprop(blob, noff, "edid", edid_buf, 128); + if (ret == -FDT_ERR_NOSPACE) { + ret = fdt_increase_size(blob, 512); + if (!ret) + goto add_edid; + else + goto err_size; + } else if (ret < 0) { + printf("Can't add property: %s\n", fdt_strerror(ret)); + return ret; + } + } + return 0; +err_size: + printf("Can't increase blob size: %s\n", fdt_strerror(ret)); + return ret; +} +#endif diff --git a/include/fdt_support.h b/include/fdt_support.h index 871ef45..b2a7a0c 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -87,6 +87,7 @@ u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr); int fdt_node_offset_by_compat_reg(void *blob, const char *compat, phys_addr_t compat_off); int fdt_alloc_phandle(void *blob); +int fdt_add_edid(void *blob, const char *compat, unsigned char *buf);
#endif /* ifdef CONFIG_OF_LIBFDT */ #endif /* ifndef __FDT_SUPPORT_H */