Re: [U-Boot] [PATCH v5] ARM: mx31: Print the silicon version

Le 12/04/2011 04:18, Fabio Estevam a écrit :

Use the same method of the Linux kernel to print the MX31 silicon version on boot.

Tested on a MX31PDK with a 2.0 silicon, where it shows:

CPU: Freescale i.MX31 rev 2.0 at 531 MHz

Signed-off-by: Fabio Estevamfabio.estevam@freescale.com

---

Changes since v4:

• Get rid of imx_soc_revision.h and its macro

Changes since v3:

• Keep consistency with other i.MX processors and print the silicon version

in the same line as the CPU name

• Remove unneeded blank line in imx_soc_revision.h

Changes since v2:

• Use macro instead of defines for IMX_CHIP_REVISION

Changes since v1:

• rename the CPU detect function name to get_cpu_rev
• Use struct to access iim register arch/arm/cpu/arm1136/mx31/generic.c | 30 +++++++++++++++++++++++++++- arch/arm/include/asm/arch-mx31/imx-regs.h | 25 ++++++++++++++++++++++++ 2 files changed, 53 insertions(+), 2 deletions(-)

Seems this is ok.

Stefano, will you take this patch in and send a pull request, or do you want me to pick it?

Amicalement,