Hi, Andreas
On 10/10/2012 5:51 AM, Andreas Bießmann wrote:
Hi Josh,
On 09.10.12 12:11, Josh Wu wrote:
Hi, Andreas
Any feedback of these patches?
short answer: no ;)
I think they could go into next (no obvious objections), but I would like to do some runtime tests on avr32 before. Beside that, if you do not insist on applying them ASAP to next I would like to wait until the release next Monday and apply the patches to u-boot-atmel/master then. Is that OK for you?
Yes, I'm fine with this. thank you.
Best Regards, Josh Wu
Best regards
Andreas Bießmann
Best Regards, Josh Wu
On 9/14/2012 4:22 PM, Josh Wu wrote:
This patch series enable MCI0 solt in at91sam9x5ek board.
Josh Wu (3): mmc: at91: add multi block read/write support. ARM: at91sam9x5: enable MCI0 support for 9x5ek board. mmc: at91: use max timeout value. It will avoid some situation that timeout happened.
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 15 +++++++++++++++ board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 ++++++++++ drivers/mmc/gen_atmel_mci.c | 15 +++++++++++++-- include/atmel_mci.h | 7 ++++++- include/configs/at91sam9x5ek.h | 10 ++++++++++ 5 files changed, 54 insertions(+), 3 deletions(-)