From: Anatolij Gustschin agust@denx.de
Boards may extend or re-define the boot list in their board_boot_order() function by modifying spl_boot_list. E.g. a board might boot SPL from a slow SPI NOR flash and then load the U-Boot from an eMMC or SD-card. Or it might use additional MMC boot device in spl_boot_list for cases when the image in SPI NOR flash is not found, so it could fall back to eMMC, SD-card or another boot device.
Getting the MMC boot mode in spl_mmc will fail when we are trying to boot from an MMC device in the spl_boot_list and the original board boot mode (as returned by spl_boot_device()) is not an MMC boot mode. Fix it by checking the asked MMC boot device from the spl_mmc_boot_mode() argument.
Signed-off-by: Anatolij Gustschin agust@denx.de --- arch/arm/mach-imx/spl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c index 49bb3b928da1..e5835150a06d 100644 --- a/arch/arm/mach-imx/spl.c +++ b/arch/arm/mach-imx/spl.c @@ -229,7 +229,7 @@ u32 spl_mmc_boot_mode(const u32 boot_device) #ifdef CONFIG_SPL_FORCE_MMC_BOOT switch (boot_device) { #else - switch (spl_boot_device()) { + switch (boot_device) { #endif /* for MMC return either RAW or FAT mode */ case BOOT_DEVICE_MMC1: