On Thursday, January 22, 2015 at 01:42:10 PM, Fabio Estevam wrote:
Hi Graeme,
On Wed, Jan 21, 2015 at 9:55 AM, Graeme Russ gruss@tss-engineering.com
wrote:
Section 4.1.2 of Freescale Application Note AN4199 describes the configuration required to operate the mx28 from a 5V source without a battery. This patch implements the changes to the Freescale bootlets which allow this configuration to properly boot the mx28 processor
Signed-off-by: Graeme Russ gruss@tss-engineering.com
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 190 +++++++++++++++++++++++++++- doc/README.mxs | 10 ++
Damien posted today a new version of this patch in the imx community, which is a lot simpler.
Guys, we have U-Boot mailing list for posting U-Boot patches. It'd be nice if you could use it to prevent fragmentation of efforts ;-)
But of course, the effort is appreciated, just a rant.
Best regards, Marek Vasut